A novel three-dimensional volumetric method to measure indirect decompression after percutaneous cement discoplasty

Association between Modic changes and intervertebral vacuum phenomenon severity in patients undergoing percutaneous cement discoplasty

BACKGROUND

Modic changes and intervertebral vacuum phenomenon (IVP) are considered spinal degenerative changes. The correlation between Modic and IVP has not been analyzed in the literature.

PURPOSE

To analyze the correlation between IVP severity, Modic changes, and subchondral sclerosis across the lumbar spine in patients with lumbar degeneration.

MATERIAL AND METHODS

This is a retrospective study analyzing patients who underwent percutaneous cement discoplasty at a single institution between 2015 and 2020. Preoperative magnetic resonance imaging and computed tomography scans were analyzed to make the measurements. Modic type and grade as well as severity of IVP were preoperatively measured. The association between Modic type, grade, subchondral sclerosis, and the presence of IVP was analyzed.

RESULTS

In total, 110 patients (mean age = 77.03 ± 7.1 years) were finally included in the study. Per level correlation analysis showed a significant positive association between IVP and Modic type, IVP and Modic grade, and IVP and subchondral sclerosis. Moreover, subchondral sclerosis was significantly associated with Modic type and grade.

CONCLUSION

Our study showed a significant positive correlation among Modic changes, IVP, and subchondral sclerosis throughout the lumbar spine. Our findings support the theory that endplate degeneration parameters are associated with the presence and severity of IVP.

Complication Pattern After Percutaneous Cement Discoplasty: Identification of Factors Influencing Reoperation and Length of Hospital Stay

OBJECTIVE

Percutaneous cement discoplasty (PCD) was introduced to treat symptomatic vertical instability of the lumbar spine in a minimally invasive way. The aim of the present study was to analyze the complication pattern after PCD and to identify factors that predict the chance of cement leakage, reoperation, and length of hospital stay (LOS).

METHODS

patients were treated with PCD within the study period. Clinical features and complications were analyzed by applying descriptive statistics, whereas perioperative factors predictive of cement leakage, reoperation, and LOS were identified by regression models.

RESULTS

Cement leakage rate was 30.4% in the total cohort; however, only fifth of them were symptomatic. Cement leakage itself did not have a significant influence on clinical outcome. Other complications and nonsurgical adverse events were registered only in 2.0% of cases. Age, subcutaneous fat tissue thickness, low viscosity cement, lower level of surgeon's experience and the number of operated levels were identified as risk factors of cement leakage (P < 0.01; c-index = 0.836). Type of procedure, Charlson comorbidity score, reoperation, and nonsurgical adverse events significantly increased the LOS (P < 0.01). Cement leakage, early surgical practice, and increased subcutaneous fat tissue thickness were risk factors for reoperation (P < 0.01; c-index = 0.72).

CONCLUSIONS

PCD is a relatively safe and effective procedure for treating spinal instability caused by advanced-stage disc degeneration characterized by vacuum phenomenon. Cement leakage is not uncommon but is only a radiologic complication without clinical consequences in most cases. On the other hand, it can increase the LOS and is a significant risk factor for reoperation.

Biomechanical consequences of cement discoplasty: An in vitro study on thoraco-lumbar human spines

With the ageing of the population, there is an increasing need for minimally invasive spine surgeries to relieve pain and improve quality of life. Percutaneous Cement Discoplasty is a minimally invasive technique to treat advanced disc degeneration, including vacuum phenomenon. The present study aimed to develop an in vitro model of percutaneous cement discoplasty to investigate its consequences on the spine biomechanics in comparison with the degenerated condition. Human spinal segments (n = 27) were tested at 50% body weight in flexion and extension. Posterior disc height, range of motion, segment stiffness, and strains were measured using Digital Image Correlation. The cement distribution was also studied on CT scans. As main result, percutaneous cement discoplasty restored the posterior disc height by 41% for flexion and 35% for extension. Range of motion was significantly reduced only in flexion by 27%, and stiffness increased accordingly. The injected cement volume was 4.56 ± 1.78 ml (mean ± SD). Some specimens (n = 7) exhibited cement perforation of one endplate. The thickness of the cement mass moderately correlated with the posterior disc height and range of motion with different trends for flexions vs. extension. Finally, extreme strains on the discs were reduced by percutaneous cement discoplasty, with modified patterns of the distribution. To conclude, this study supported clinical observations in term of recovered disc height close to the foramen, while percutaneous cement discoplasty helped stabilize the spine in flexion and did not increase the risk of tissue damage in the annulus.

An ex-vivo model for the biomechanical assessment of cement discoplasty

Percutaneous Cement Discoplasty (PCD) is a surgical technique developed to relieve pain in patients with advanced degenerative disc disease characterized by a vacuum phenomenon. It has been hypothesized that injecting bone cement into the disc improves the overall stability of the spinal segment. However, there is limited knowledge on the biomechanics of the spine postoperatively and a lack of models to assess the effect of PCD ex-vivo. This study aimed to develop a biomechanical model to study PCD in a repeatable and clinically relevant manner. Eleven ovine functional spinal units were dissected and tested under compression in three conditions: healthy, injured and treated. Injury was induced by a papain buffer and the treatment was conducted using PMMA cement. Each sample was scanned with micro-computed tomography (CT) and segmented for the three conditions. Similar cement volumes (in %) were injected in the ovine samples compared to volumes measured on clinical PCD CT images. Anterior and posterior disc heights decreased on average by 22.5% and 23.9% after injury. After treatment, the anterior and posterior disc height was restored on average to 98.5% and 83.6%, respectively, of their original healthy height. Compression testing showed a similar stiffness behavior between samples in the same group. A decrease of 51.5% in segment stiffness was found after injury, as expected. The following PCD treatment was found to result in a restoration of stiffness—showing only a difference of 5% in comparison to the uninjured state. The developed ex-vivo model gave an adequate representation of the clinical vacuum phenomena in terms of volume, and a repeatable mechanical response between samples. Discoplasty treatment was found to give a restoration in stiffness after injury. The data presented confirm the effectiveness of the PCD procedure in terms of restoration of axial stiffness in the spinal segment. The model can be used in the future to test more complex loading scenarios, novel materials, and different surgical techniques.

Critical Review of the State-of-the-Art on Lumbar Percutaneous Cement Discoplasty

Interbody fusion is the gold standard surgery to treat lumbar disc degeneration disease but can be a high-risk procedure in elderly and polymorbid patients. Percutaneous Cement Discoplasty (PCD) is a minimally invasive technique developed to treat advanced stage of disc degeneration exhibiting a vacuum phenomenon. A patient-specific stand-alone spacer is created by filling the disc with polymethylmethacrylate cement, allowing to recover the disc height and improve the patient’s conditions. As it has recently been introduced in the lumbar spine, this review aims to present a transversal state-of-the-art of the surgery from its clinical practice and outcome to biomechanical and engineering topics. The literature was searched across multiple databases using predefined keywords over no limited period of time. Papers about vertebroplasty were excluded. Among 466 identified papers, the relevant ones included twelve clinical papers reporting the variations of the surgical technique, follow-up and complications, four papers reporting biomechanical ex vivo and numerical tests, and four letters related to published clinical papers. Papers presenting the operative practice are reported, as well as follow-ups up to four years. The papers found, consistently reported that PCD significantly improved the clinical status of the patients and maintained it after two years. Spine alignment was impacted by PCD: the sacral slope was significantly reduced, and disc height increased. The foramen opening correlated to the volume of injected cement. Substitutes to the acrylic cement exhibited better osteointegration and mechanical properties closer to bone tissue. Finally, limitations and risks of the surgery are discussed as well as potential improvements such as the development of new filling materials with better mechanical properties and biological integration or the investigation of the inner disc.

Low-Modulus PMMA Has the Potential to Reduce Stresses on Endplates after Cement Discoplasty

Cement discoplasty has been developed to treat patients with advanced intervertebral disc degeneration. In discoplasty, poly(methylmethacrylate) (PMMA) bone cement is injected into the disc, leading to reduced pain and certain spinal alignment correction. Standard PMMA-cements have much higher elastic modulus than the surrounding vertebral bone, which may lead to a propensity for adjacent fractures. A PMMA-cement with lower modulus might be biomechanically beneficial. In this study, PMMA-cements with lower modulus were obtained using previously established methods. A commercial PMMA-cement (V-steady^®, G21 srl) was used as control, and as base cement. The low-modulus PMMA-cements were modified by 12 vol% (LA12), 16 vol% (LA16) and 20 vol% (LA20) linoleic acid (LA). After storage in 37 °C PBS from 24 h up to 8 weeks, specimens were tested in compression to obtain the material properties. A lower E-modulus was obtained with increasing amount of LA. However, with storage time, the E-modulus increased. Standard and low-modulus PMMA discoplasty were compared in a previously developed and validated computational lumbar spine model. All discoplasty models showed the same trend, namely a substantial reduction in range of motion (ROM), compared to the healthy model. The V-steady model had the largest ROM-reduction (77%), and the LA20 model had the smallest (45%). The average stress at the endplate was higher for all discoplasty models than for the healthy model, but the stresses were reduced for cements with higher amounts of LA. The study indicates that low-modulus PMMA is promising for discoplasty from a mechanical viewpoint. However, validation experiments are needed, and the clinical setting needs to be further considered.