Chemiluminometric determination of propranolol in an automated multicommutated flow system

Manufacturing of a Sensitive and Selective Optical Sensor Based on Molecularly Imprinted Polymers and Green Carbon Dots Synthesized from Cedrus Plant for Trace Analysis of Propranolol

In this article, a new optical sensor was developed using a molecularly imprinted polymers layer coated with new green carbon dots (CDs) for the determination of propranolol. First, the CDs were synthesized for the first time from Cedrus plant through the hydrothermal method. Then, a nanolayer molecularly imprinted polymer (MIP) was applied on the CDs (MIP-CDs) in the presence of propranolol as a template using a reverse microemulsion technique. Afterward, propranolol was removed from MIP-CDs nanocomposites using a mixture of ethanol and acetonitrile, and the obtained nanocomposite was used as a fluorescence sensor for propranolol determination. Under the optimal conditions, the sensor response was linear in the range of 0.8 - 65.0 nmol L^-1 with a detection limit of 0.2 nmol L^-1. The results confirmed that the sensor has some advantages such as cost-effectiveness, rapid response, high sensitivity and selectivity for propranolol determination.

Electrogenerated chemiluminescence sensor for the determination of

An electrogenerated chemiluminescence (ECL) sensor for the determination of propranolol hydrochloride was fabricated by employing tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)32+) as an ECL signal producer and graphene as a modified material. The ECL sensor was fabricated by adsorbing Ru(bpy)32+ onto a mixture of graphene and Nafion. The introduction of conductive graphene into Nafion was found to greatly enhance the ECL intensity of Ru(bpy)32+ and the ECL intensity of Ru(bpy)32+ decreased in the presence of propranolol hydrochloride. Based on this phenomenon, a sensitive and stable ECL method was developed for the determination of propranolol hydrochloride by employing a Ru(bpy)32+-graphene-Nafion modified electrode. Under the optimized conditions, the ECL intensity was linear with the concentration of propranolol hydrochloride over a range of 1.0 × 10-10 to 5.0 × 10-9 mol L-1 with a detection limit of 3 × 10-11 mol L-1. The ECL sensor exhibited long-term stability with a relative standard deviation of 4.1% for sixteen continuous determinations of 2.0 × 10-9 mol L-1 propranolol hydrochloride. The developed method has been successfully applied to the determination of propranolol hydrochloride in pharmaceutical samples.

Acidic potassium permanganate as a chemiluminescence reagent—A review

A critical and comprehensive review of acidic potassium permanganate chemiluminescence is presented. This includes discussion on reaction conditions, the influence of enhancers such as polyphosphates, formaldehyde and sulfite, the relationship between analyte structure and chemiluminescence intensity, and the application of this chemistry to determine a wide variety of compounds, such as pharmaceuticals, biomolecules, antioxidants, illicit drugs, pesticides and pollutants. Previous proposals for the nature of the emitting species are re-evaluated in light of recent evidence.

Chemiluminescence optosensing implemented with multicommutation: Determination of salicylic acid

In this paper we have coupled, for the first time, chemiluminescent detection with multicommuted optosensing principles. This approach has been implemented with the use of a commercial flow cell of 1mm optical path length filled with an appropriate anionic exchanger gel as chemiluminescence sensing phase. The cell was placed in front of the window of the photosensor module of a home-made luminometer developed in our laboratory and a flat mirror was stuck on the back of the cell. The suitability of using chemiluminescence as detection technique in multicommuted flow-through optosensors has been demonstrated: the determination of salicylic acid by simple oxidation with permanganate on the sensing solid phase was chosen as model reaction. The proposed system allows the determination of salicylic acid in pharmaceuticals, with a sample frequency as high as even 60 samples h(-1) and showing a detection limit of 0.30 microg mL(-1), the linear response range is 1-30 microg mL(-1) and the R.S.D. is 3.1%. Satisfactory results have been obtained when applying the sensor to pharmaceuticals. The accuracy of the proposed methodology has been tested by using a reference method.