A method for the quantification of low concentration sulfamethazine residues in milk based on molecularly imprinted clean-up and surface preconcentration at a Nafion-modified glassy carbon electrode

Innovative Use of Carbon Nanofibers/Praseodymium Cobaltite for Targeted Detection of Hematologic Sulfamethazine

Antibiotics are essential for treating illnesses, but abuse has resulted in serious consequences. Rapid and precise detection of antibiotic residues, such as sulfamethazine (SFZ), in water and biological samples is critical for public health and environmental safety. To address this challenge, we have introduced a pioneering electrochemical sensor incorporating a nanocomposite of perovskite-structured praseodymium cobaltite (PrCoO3) integrated with carbon nanofibers (CNFs) on a glassy carbon electrode (GCE|CNF/PrCoO3). We synthesized the CNF/PrCoO3 nanocomposite using ultrasonic fabrication and confirmed its formation with advanced techniques. GCE|CNF/PrCoO3 offer superior SFZ detection with a 2.889 nM/L limit and high selectivity, due to PrCoO3's electrocatalytic properties and CNF's enhanced conductivity. We validated the sensor's effectiveness in detecting SFZ in various real-water samples, demonstrating its repeatability, reproducibility, and stability. This confirms its reliability for environmental monitoring. The study highlights the potential of perovskite-carbon composites and paves the way for developing cost-effective sensors for pharmaceutical contaminants.

Development of an electrochemical sensor for the determination of antibiotic sulfamethazine in cow milk using graphene oxide decorated with Cu-Ag core-shell nanoparticles

Determination and sensing of antibiotics in dairy products are the biggest challenges in the world. In continuation of our earlier study, a facile and novel determination method for the detection of sulfamethazine (SMZ) in cow milk has been developed using a glassy carbon electrode modified with graphene oxide decorated with Cu-Ag core-shell nanoparticles. The Cu-Ag core-shell nanoparticles and graphene oxide were synthesized and characterized via different techniques such as TEM, SEM, XRD and FTIR. The as-synthesized Cu-Ag core-shell nanoparticles were used for the decoration of the glassy carbon electrode modified with graphene oxide. The electroanalytical measurements including cyclic voltammetry and square wave voltammetry were performed and compared with HPLC, which was utilized for the determination of SMZ in cow milk. The experimental conditions were optimized to obtain a well-defined response signal. The concentration linear range was 10-1000 μM and the limit of detection was 0.46 μM for S/N = 3. The obtained results show good agreement with HPLC reported data.

Molecular imprinting science and technology: a survey of the literature for the years 2004-2011

Herein, we present a survey of the literature covering the development of molecular imprinting science and technology over the years 2004-2011. In total, 3779 references to the original papers, reviews, edited volumes and monographs from this period are included, along with recently identified uncited materials from prior to 2004, which were omitted in the first instalment of this series covering the years 1930-2003. In the presentation of the assembled references, a section presenting reviews and monographs covering the area is followed by sections describing fundamental aspects of molecular imprinting including the development of novel polymer formats. Thereafter, literature describing efforts to apply these polymeric materials to a range of application areas is presented. Current trends and areas of rapid development are discussed.

Development and evaluation of a molecularly imprinted polymer for the detection and cleanup of benzylpenicillin in milk

A molecularly imprinted polymer (MIP) was designed for benzylpenicillin via suspension polymerization. The specific absorption of benzylpenicillin to the MIP, applied in a molecularly imprinted solid-phase extraction (MISPE), was compared to the nonspecific binding using a NIP (nonimprinted polymer without a target molecule) in a non-molecularly imprinted solid-phase extraction. This validation was performed successfully in acetonitrile solutions and milk extracts spiked with benzylpenicillin. Significant differences in absorption were observed. In acetonitrile, the recoveries using MISPE (90-95%) were a fraction higher than those in milk extracts (70-80%). The validation revealed the limit of detection and the limit of quantitation for the MISPE application in milk samples to be 0.51 and 1.02 μg/kg, respectively. In addition, comparing the results of the analysis of positive milk samples using MISPE with those using a classic sample preparation step showed a Pearson correlation of 0.989. Finally, cross reactivity tests using other antibiotics showed a certain cross reactivity, but non-β-lactams were barely bound.

Preparation of molecularly imprinted polymer containing selective cavities for urea molecule and its application for urea extraction

A new molecularly imprinted polymer material having urea molecule selective cavities was introduced. Urea was properly dissolved in acetonitrile in the presence of an acidic functional monomer. Molecularly imprinted polymers with different compositions were examined and the roper formulation was selected. It was shown that the MIP had a considerable selectivity for urea in comparison to similar compounds such as thiourea and hydroxyurea. The obtained polymer was used as an adsorber for solid phase extraction (SPE) of urea in the aqueous samples. The extracted urea was determined by using a spectrophotometric method. Different parameters of SPE were optimized and the developed procedure was used for urea determination in real samples. The calibration graph of the method was linear in the range of 0.6-8.3 micromol L(-1). The detection limit was calculated to be 0.14 micromol L(-1).

Immuno-like assays and biomimetic microchips

Biomimetic assays with molecularly imprinted polymers (MIPs) are bound to be an alternative to the traditional immuno-analytical methods based on antibodies. This is due to the unique combination of advantages displayed by the artificial materials including the absence of animal inoculation and sacrifice, unnecessary hapten conjugation to a carrier protein for stimulated production, the possibility of manufacturing MIPs against toxic substances, excellent physicochemical stability, reusability, ease of storage, and recognition in organic media. If the selectivity and affinity of MIPs are increased, many more immuno-like assays will be developed using radioactive, enzymatic, colorimetric, fluorescent, chemiluminescent, or electrochemical interrogation methods. This chapter provides a comprehensive comparison between the bio- and biomimetic entities and their usage.

Molecularly imprinted polymers and their application in solid phase extraction

Solid phase extraction is routinely used in many different areas of analytical chemistry. Some of the main fields are environmental, biological, and food chemistry, where cleaning and pre-concentration of the sample are important steps in the analytical protocol. Molecularly imprinted polymers (MIPs) have attracted attention because they show promise as compound-selective or group-selective media. The application of these synthetic polymers as sorbents allows not only pre-concentration and cleaning of the sample but also selective extraction of the target analyte, which is important, particularly when the sample is complex and impurities can interfere with quantification. This review surveys the selectivity of MIPs in solid phase extraction of various kinds of analytes.

Solid phase extraction of food contaminants using molecular imprinted polymers

Food contamination from natural or anthropogenic sources poses severe risks to human health. It is now largely accepted that continuous exposure to low doses of toxic chemicals can be related to several chronic diseases, including some type of cancer and serious hormonal dysfunctions. Contemporary analytical methods have the sensitivity required for contamination detection and quantification, but direct application of these methods on food samples can be rarely performed. In fact, the matrix introduces severe disturbances, and analysis can be performed only after some clean-up and preconcentration steps. Current sample pre-treatment methods, mostly based on the solid phase extraction technique, are very fast and inexpensive but show a lack of selectivity, while methods based on immunoaffinity extraction are very selective but expensive and not suitable for harsh environments. Thus, inexpensive, rapid and selective clean-up methods, relaying on "intelligent" materials are needed. Recent years have seen a significant increase of the "molecularly imprinted solid phase extraction" (MISPE) technique in the food contaminant analysis. In fact, this technique seems to be particularly suitable for extractive applications where analyte selectivity in the presence of very complex and structured matrices represents the main problem. In this review, several applications of MISPE in food contamination analysis will be discussed, with particular emphasis on the extraction of pesticides, drugs residua, mycotoxins and environmental contaminants.

Application of molecularly imprinted polymers to solid-phase extraction of analytes from real samples

A review is presented of recent developments in the use of molecularly imprinted polymers (MIPs) as selective materials for solid-phase extraction. Compared with traditional sorbents, MIPs can not only concentrate but also selectively separate the target analytes from real samples, which is crucial for the quantitatively determination of analytes in complex samples. Consequently, as one of the most effective sorbents, MIPs have been successfully applied to the pretreatment of analytes in foods, drugs, and biological and environmental samples in the past five years.

Molecularly imprinted solid-phase extraction method for the high-performance liquid chromatographic analysis of fungicide pyrimethanil in wine

A method for molecularly imprinted solid-phase extraction (MISPE) of the fungicide pyrimethanil from wine samples has been investigated. The molecular imprinted polymer was obtained by iniferter-mediated grafting on porous chloromethylated polystyrene beads, using methacrylic acid as the functional monomer and ethylene glycol dimethacrylate as the cross-linker. The imprinted beads were evaluated for use as a solid-phase extraction sorbent, in order to develop the extraction protocol in aqueous standards and red wine samples. The optimised extraction protocol resulted in a reliable MISPE method suitable for HPLC analysis (stationary phase: Cromolith Performance C18 column, 100 mm x 4.6 mm; mobile phase: acetonitrile-water (3:2, v/v), flow-rate: 1.00 ml/min; detection 270 nm). It was selective for pyrimethanil and the related pyrimidinic fungicides cyprodinil and mepanipyrim, while the non-pyrimidinic fungicides benalaxyl, chlozolinate, furalaxyl, iprodione, metalaxyl, nuarimol, procymidone and vinclozolin were not extracted. Recoveries performed on a wine matrix spiked with pyrimethanil at three different concentration levels were reproducible and were in good agreement with the recoveries performed on buffer, coming out between 80 and 90% (85+/-7.0% at 0.50 microg/ml, 79+/-1.6% at 2.0 microg/ml and 87+/-5.6% at 20 microg/ml). Preconcentration and quantitative extraction of pyrimethanil from wine samples was shown to be feasible down to 0.1 microg/ml.