Experimental design and capillary electrophoresis for simultaneous analysis of arbutin, kojic acid and hydroquinone in cosmetics

Electrochemical sensors based on the composite of reduced graphene oxide and a multiwalled carbon nanotube-modified glassy carbon electrode for simultaneous detection of hydroquinone, dopamine, and uric acid

Using a simple drop-casting technique, we successfully fabricated a sensitive electrochemical sensor based on the composite of reduced graphene oxide (RGO) and multiwalled carbon nanotubes (MWCNT) deposited on the surface of a glassy carbon electrode (GCE) for individual and simultaneous measurements of hydroquinone (HQ), dopamine (DA), and uric acid (UA). The nanocomposite of RGO/MWCNT was further characterized in terms of its structural properties, surface morphology, and topography using Raman, FT-IR spectroscopy, SEM, HRTEM, and AFM. Then, the proposed sensor for simultaneous measurement of HQ, DA, and UA based on RGO/MWCNT-modified GCE was investigated for its electrochemical behavior and electroanalytical performances using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). In addition, the composition ratio between RGO and MWCT was 1 : 1 showing the highest electrochemical response for simultaneous detection of HQ, DA, and UA. Owing to the synergistic effect between RGO and MWCNT leading to excellent conductivity properties, the proposed sensor exhibited improved electrochemical response at pH 7 toward the oxidation processes of HQ, DA, and UA on the surface of modified electrode. The proposed sensor demonstrated three well-defined anodic peaks of these analytes with their linear concentrations ranges of 3.0-150.0 μM for HQ, 4.0-100.0 μM for DA, and 2.0-70.0 μM for UA. The limit of detection values for the simultaneous detection of HQ, DA, and UA were found as follows 0.400 ± 0.014, 0.500 ± 0.006, and 0.300 ± 0.016 μM, respectively. The additional features of this proposed sensor are high reproducibility and stability for the simultaneous detection of HQ, DA, and UA with negligible interference effect from interferents such as Mg2+, K+, Cl-, ascorbic acid, and glucose. An acceptable percentage of recovery was also shown by this sensor for simultaneous measurements of HQ, DA, and UA using 6 samples of human urine. In summary, the RGO/MWCNT nanocomposite has been shown to be a promising platform for rapid, simple, and reliable determination of simultaneous measurements of HQ, DA, and UA in practical applications.

Novel nickel(II) phthalocyanine/reduced graphene oxide: an electrochemical sensing platform for analysis of hydroquinone and chloramphenicol in environmental samples

Novel tetra-2-(biphenyl-4-yl)-1,3-benzoxazol-carboxamide nickel(II) phthalocyanine (NiTBPBXCAPc) and rGO were confirmed using FT-IR, UV-vis, XRD, TGA and Raman spectra. The NiTBPBXCAPc and rGO nanocomposite has been developed to detect hydroquinone (HQN) and chloramphenicol (CPC). NiTBPBXCAPc has been examined using cyclic voltammetry (CV), linear sweep voltammetry (LSV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS) analysis. The simultaneous CV analysis of HQN and CPC demonstrated the ability of NiTBPBXCAPc@rGO/GCE to execute simultaneous redox reactions. The voltammetric and amperometric limit of detection for HQN and CPC was determined to be 4.5 and 3.5 nM respectively, with a sensitivity of 0.446 and 0.416 μA M-1 cm-2. The amperometric LOD was observed to be 5 and 4 nM with a sensitivity of 0.235 and 0.288 μA M-1 cm-2. Additionally, the NiTBPBXCAPc@rGO/GC electrode is also used for real sample analysis with outstanding recovery. The long-term storage stability, reusability, and real-world sample analysis of the NiTBPBXCAPc@rGO/GC electrode demonstrated its use in environmental analysis.

Electrochemical Sensor for Simple and Sensitive Determination of Hydroquinone in Water Samples Using Modified Glassy Carbon Electrode

This study addressed the use of manganese dioxide nanorods/graphene oxide nanocomposite (MnO₂ NRs/GO) for modifying a glassy carbon electrode (GCE). The modified electrode (MnO₂ NRs/GO/GCE) was used as an electrochemical sensor for the determination of hydroquinone (HQ) in water samples. Differential pulse voltammetry (DPV), cyclic voltammetry (CV), and chronoamperometry were used for more analysis of the HQ electrochemical behavior. Analyses revealed acceptable electrochemical functions with lower transfer resistance of electrons and greater conductivity of the MnO₂ NRs/GO/GCE. The small peak-to-peak separation is an indication of a rapid electron transfer reaction. Therefore, this result is probably related to the effect of the MnO₂ NRs/GO nanocomposite on the surface of GCE. In the concentration range of 0.5 μM to 300.0 μM with the detection limit as 0.012 μM, there was linear response between concentration of HQ and the current. The selectivity of the modified electrode was determined by detecting 50.0 μM of HQ in the presence of various interferent molecules. At the end, the results implied the acceptable outcome of the prepared electrode for determining HQ in the water samples.

Rhodamine B functionalized luminescent metal-organic frameworks for ratiometric fluorescence sensing of hydroquinone

The development of sensitive and selective detection methods for hydroquinone (HQ), a phenolic organic compound with high toxicity and low degradability, is of extraordinary importance. In this work, a fluorescent sensor based on functionalized luminescent metal-organic frameworks (LMOFs) was designed and applied for the ratiometric fluorescence sensing of HQ. The sensor was prepared by the functionalization of IRMOF-3 with rhodamine B (RhB), possessing dual-emission fluorescence properties. After the addition of HQ, the blue fluorescence of the IRMOF-3 framework was gradually weakened, while the red fluorescence of RhB remained unchanged, resulting in the continuous fluorescence change of RhB@IRMOF-3 with HQ concentrations. The sensing mechanism demonstrates that HQ changes the fluorescence of the sensor via electron transfer between benzoquinone and RhB@IRMOF-3. The RhB@IRMOF-3 sensor has the advantages of a wide linear range, quick response speed, and strong specificity for HQ detection. This work is the first attempt focusing on functionalized LMOFs for HQ fluorescence detection, which has superb potential for the application to real environmental water samples.

A modified carbon paste electrode with N-rGO/CuO nanocomposite and ionic liquid for the efficient and cheap voltammetric sensing of hydroquinone in water specimens

This paper reports a voltammetric sensor based on copper oxide nanoparticles on nitrogen-doped reduced graphene oxide nanocomposite (N-rGO/CuO)-ionic liquid modified carbon paste electrode (N-rGO/CuO-ILCPE) for determining the hydroquinone (HQ). The N-rGO/CuO was prepared by a facile protocol, followed by characterization via fourier transform-infrared (FT-IR) patterns, field emission-scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDX), and X-ray diffraction (XRD) analysis. The electrochemical behaviour was linearly symmetrical to various hydroquinone levels (1.0-600.0 μM) with a narrow limit of detection (LOD = 0.25 μM). The diffusion coefficient was also estimated to be 4.1 × 10^-6 cm²/s. The N-rGO/CuO-ILCPE was impressively applicable in determination of hydroquinone in the real specimens.

Radioprotective Mechanisms of Arbutin: A Systematic Review

PURPOSE

Efforts to produce radioprotective agents of high potential are appropriate strategies for overcoming possible IR toxicity in organisms. The present research aims to evaluate the signaling pathways and mechanisms through which arbutin exerts radioprotective effects on organisms.

METHODS

The databases of PubMed, Web of Sciences, Google Scholar, and Scopus were searched to find studies that reported radioprotective effects for arbutin. Besides, the data were searched within the time period from 2010 to 2020.

RESULTS

Five research articles met our criteria, which were included in the analysis based on their relevance to the topic. The present systematic review provides conclusions about various mechanisms and pathways through which arbutin induces radioprotection.

CONCLUSIONS

Based on the relevant studies, various mechanisms can be proposed for inducing radioprotective effects by arbutin, including inhibition of oxidative stress, apoptosis, and inflammation.

Quality by Design: Concept to Applications

BACKGROUND

Quality by Design (QbD) is associated with a modern, systematic, scientific and novel approach which is concerned with pre-distinct objectives that not only focus on product, process understanding but also lead to process control. It predominantly signifies the design and product improvement and the manufacturing process in order to fulfill the predefined manufactured goods or final products quality characteristics. It is quite essential to identify the desired and required product performance report, such as Target Product Profile, typical Quality Target Product Profile (QTPP) and Critical Quality Attributes (CQA).

METHODS

This review highlighted the concepts of QbD design space, for critical material attributes (CMAs) as well as the critical process parameters that can totally affect the CQAs within which the process shall be unaffected thus, consistently manufacturing the required product. Risk assessment tools and design of experiments are its prime components.

RESULTS

This paper outlines the basic knowledge of QbD, the key elements; steps as well as various tools for QbD implementation in pharmaceutics field are presented briefly. In addition to this, quite a lot of applications of QbD in numerous pharmaceutical related unit operations are discussed and summarized.

CONCLUSION

This article provides a complete data as well as the roadmap for universal implementation and application of QbD for pharmaceutical products.

Interaction between fasudil hydrochloride and bovine serum albumin: spectroscopic study

The interaction between fasudil hydrochloride (FSD) and bovine serum albumin (BSA) was investigated using fluorescence and ultraviolet spectroscopy under imitated physiological conditions. The Stern-Volmer quenching model has been successfully applied and the results revealed that FSD could quench the intrinsic fluorescence of BSA effectively via static quenching. The binding constants and binding sites for the BSA-FSD system were evaluated. The corresponding thermodynamic parameters obtained at different temperatures indicated that hydrophobic force played a major role in the interaction of FSD and BSA. The distance between the donor (BSA) and the acceptor (FSD) was obtained according to fluorescence resonance energy transfer (FRET). Synchronous fluorescence spectroscopy and FT-IR spectra showed that the conformation of BSA was changed in the presence of FSD. Copyright © 2015 John Wiley & Sons, Ltd.

Simultaneous determination of arbutin and its decomposed product hydroquinone in whitening creams using high-performance liquid chromatography with photodiode array detection: Effect of temperature and pH on decomposition

OBJECTIVE

Arbutin is an effective agent for the treatment of melanin disorders. Arbutin may be converted to hydroquinone under conditions of high temperature, ultraviolet (UV) radiation and dilute acid. The aim of the current study was to develop an analytical method to determine the levels of arbutin and hydroquinone in whitening cosmetic products using high-performance liquid chromatography with photodiode array detection (HPLC-DAD). In addition, we investigated the effects of high temperature and pH on the decomposition of arbutin.

METHODS

Samples extracted using two-step sonications were separated on a C18 column using a gradient mobile phase consisting of water and methanol. A 60-mm (40 μL) DAD cell was used to enhance the sensitivity of hydroquinone determination. Thermal decomposition of arbutin was evaluated at temperatures ranging from 60 to 120°C for 1-36 h.

RESULTS

The method showed good linearity (R(2) ≥ 0.9997), precision (relative standard deviation, RSD < 5%) and acceptable extraction recovery (90-102.6%). The limits of quantitation for arbutin and hydroquinone were 0.0085 and 0.0119 μg mL(-1) , respectively. One sample of 21 cosmetic products tested contained arbutin at a concentration 1.61 g 100 g(-1) cream and 0.12 g 100 g(-1) cream of hydroquinone. Arbutin (327.18 ppm) decomposed after 6 h at 120°C and produced 10.73 ppm of hydroquinone.

CONCLUSION

The developed method is simple to detect both arbutin and hydroquinone simultaneously in cosmetic products, at an adequate level of sensitivity. Notably, temperature and pH did not influence the decomposition of arbutin to hydroquinone in a 2% arbutin cream.

Multivariate optimization of capillary electrophoresis methods: a critical review

In this article a review on the recent applications of multivariate techniques for optimization of electromigration methods, is presented. Papers published in the period from August 2007 to February 2013, have been taken into consideration. Upon a brief description of each of the involved CE operative modes, the characteristics of the chemometric strategies (type of design, factors and responses) applied to face a number of analytical challenges, are presented. Finally, a critical discussion, giving some practical advices and pointing out the most common issues involved in multivariate set-up of CE methods, is provided.

HPTLC densitometric analysis of arbutin in bulk drug and methanolic extracts of Arctostaphylos uva-ursi

A high-performance thin layer chromatographic densitometric method for the analysis of arbutin was developed and validated in the present investigation. Arbutin was separated on aluminium-backed silica gel 60 F(254) plates with methanol : chloroform (3:7)% (v/v) as the mobile phase. This system was found to give a compact spot of arbutin at a retention factor (R(f)) value of 0.32 ± 0.02. The limit of detection and limit of quantification were found to be 35.42 and 106.26 ng/spot, respectively. The proposed method with a high degree of precision and accuracy was employed for the analysis of arbutin in the bulk drug and methanolic extract of Arctostaphylos uva-ursi.

Highly sensitive spectrometric method for determination of hydroquinone in skin lightening creams: application in cosmetics

A highly sensitive, simpler, faster and economical UV/visible spectrophotometric method has been established for the estimation of hydroquinone (HQ) in dilute organic matrices. The method is based on using ammonium meta-vanadate as an oxidizing catalyst for conversion of HQ to p-benzoquinone (BQ) in the presence of oxygen. As a result of higher absorption of UV light by BQ than by HQ, its signal has been utilized for determining HQ at the trace level. The effect of various parameters such as amount of oxidizing agent, stability time, temperature, acids and bases, solvents and interference by various compounds has been studied upon the absorption of BQ as HQ. Under optimized conditions, Beer's Law was obeyed in the range of 0.025-2.00 μg ml(-1) HQ at 245.5 nm using 1 : 1 (V/V) 2-propanol/water system with a lower detection limit of 7 ng ml(-1) and linear regression coefficient of 0.9998. Relative standard deviation of 1.5% was observed for 0.5 μg ml(-1) HQ solution (n = 11). The newly developed method has been successfully applied to diluted samples of various skin lightening creams for free HQ determination at the trace level. Comparison of the results obtained by the proposed method with those by a previously reported method proved its validity.

Final report of the safety assessment of Kojic acid as used in cosmetics

Kojic acid functions as an antioxidant in cosmetic products. Kojic acid was not a toxicant in acute, chronic, reproductive, and genotoxicity studies. While some animal data suggested tumor promotion and weak carcinogenicity, kojic acid is slowly absorbed into the circulation from human skin and likely would not reach the threshold at which these effects were seen. The available human sensitization data supported the safety of kojic acid at a use concentration of 2% in leave-on cosmetics. Kojic acid depigmented black guinea pig skin at a concentration of 4%, but this effect was not seen at 1%. The Cosmetic Ingredient Review (CIR) Expert Panel concluded that the 2 end points of concern, dermal sensitization and skin lightening, would not be seen at use concentrations below 1%; therefore, this ingredient is safe for use in cosmetic products up to that level.

Biomimetic sensor for certain phenols employing a copper(II) complex

A new dimeric Cu(II) complex [Cu(mu(2)-hep)(hep-H)](2).2PF(6) (1) containing a bidentate (hep-H = 2-(2-hydroxyethyl)pyridine) ligand was synthesized and characterized by single crystal X-ray diffraction studies. Each Cu ion in 1 is in a distorted square pyramidal geometry. Further 1 is used as a modifier in the construction of a biomimetic sensor for determining phenols [phenol (Phe), resorcinol (Res), hydroquinone (HQ), and catechol (Cat)] in phosphate buffer by using cyclic voltammetry (CV), chronocoulometry, electrochemical impedance spectroscopy (EIS), differential pulse voltammetry (DPV), and square wave voltammetry (SWV). DPV has been proposed for trace determination of Phe and Res while SWV for HQ and Cat. The method has been applied for the selective and precise analysis of Phe in commercial injections, Res in hair coloring agents, HQ in photographic developers and cosmetics, and Cat in tea samples and guarana tablets. The calibration curves showed a linear response ranging between 10(-6) and 10(-8) M for all four of the analytes with detection limits (3sigma) of 1.04 x 10(-8), 2.31 x 10(-8), 1.54 x 10(-8), and 0.86 x 10(-8) M for Phe, Res, HQ, and Cat, respectively. The lifetime of the biomimetic sensor was 200 days at room temperature (at least 750 determinations). The catalytic properties of 1-CPE were characterized by chronoamperometry and were found to be in good agreement with Michaelis-Menten kinetics.

Validation of a quantitative assay of arbutin using gas chromatography in Origanum majorana and Arctostaphylos uva-ursi extracts

INTRODUCTION

Arbutin is a skin-whitening agent that occurs naturally in the bark and leaves of various plants. It is commonly quantified in plant extracts and skin-whitening products by HPLC.

OBJECTIVE

To develop an alternative gas chromatographic method for the separation and quantification of arbutin in Origanum majorana and Arctostaphylos uva-ursi extracts.

METHODOLOGY

N,O-Bis(trimethylsilyl)acetamide and trimethylchlorosilane were used as silylation reagents, and the gas chromatographic separation of silylated extracts and standards was performed using a DB-5 narrow bore column. GC-MS was used for the compound identification, and the quantification was carried out by GC-FID. The quantitative results were compared with those of HPLC analysis.

RESULTS

The developed method gave a good sensitivity with linearity in the range 0.33-500 mg/mL and recovery >98%, allowing the quantification of arbutin in O. majorana and A. uva-ursi extracts. The relative standard deviations (RSD) relating to intra-day and inter-day precision were <0.002% and <4.8%, respectively. The GC results correlated well with those obtained by HPLC analysis.

CONCLUSION

The analysis of marjoram and bearberry samples showed that the established GC method was rapid, selective, and demonstrated that arbutin could be screened alternatively by gas chromatography.