Analysis of cationic liposomes by reversed-phase HPLC with evaporative light-scattering detection

Detection of aldehydes from degradation of lipid nanoparticle formulations using a hierarchically-organized nanopore electrochemical biosensor

Degradation of ionizable lipids in mRNA-based vaccines was recently found to deactivate the payload, demanding rigorous monitoring of impurities in lipid nanoparticle (LNP) formulations. However, parallel screening for lipid degradation in customized delivery systems for next-generation therapeutics maintains a challenging and unsolved problem. Here, we describe a nanopore electrochemical sensor to detect ppb-levels of aldehydes arising from lipid degradation in LNP formulations that can be deployed in massively parallel fashion. Specifically, we combine nanopore electrodes with a block copolymer (BCP) membrane capable of hydrophobic gating of analyte transport between the bulk solution and the nanopore volume. By incorporating aldehyde dehydrogenase (ALDH), enzymatic oxidation of aldehydes generates NADH to enable ultrasensitive voltammetric detection with limits-of-detection (LOD) down to 1.2 ppb. Sensor utility was demonstrated by detecting degradation of N-oxidized SM-102, the ionizable lipid in Moderna's SpikeVax™ vaccine, in mRNA-1273 LNP formulation. This work should be of significant use in the pharmaceutical industry, paving the way for automated on-line quality assessments of next-generation therapeutics.

Lipid loss and compositional change during preparation of liposomes by common biophysical methods

Liposomes are widely used as model lipid membrane platforms in many fields, ranging from basic biophysical studies to drug delivery and biotechnology applications. Various methods exist to prepare liposomes, but common procedures include thin-film hydration followed by extrusion, freeze-thaw, and/or sonication. These procedures have the potential to produce liposomes at specific concentrations and membrane compositions, and researchers often assume that the concentration and composition of their liposomes are similar to, if not identical, to what would be expected if no lipid loss occurred during preparation. However, lipid loss and concomitant biasing of lipid composition can in principle occur at any preparation step due to nonideal mixing, lipid-surface interactions, etc. Here, we report a straightforward method using HPLC-ELSD to quantify the lipid concentration and membrane composition of liposomes, and apply that method to study the preparation of simple POPC/cholesterol liposomes. We examine many common steps in liposome formation, including vortexing during re-suspension, hydration of the lipid film, extrusion, freeze-thaw, sonication, and the percentage of cholesterol in the starting mixture. We found that the resuspension step can play an outsized role in determining the overall lipid loss (up to ~50% under seemingly rigorous procedures). The extrusion step yielded smaller lipid losses (~10-20%). Freeze-thaw and sonication could both be employed to improve lipid yields. Hydration times up to 60 minutes and increasing cholesterol concentrations up to 50 mole% had little influence on lipid recovery. Fortunately, even conditions with large lipid loss did not substantially influence the target membrane composition more than ~5% under the conditions we tested. From our results, we identify best practices for producing maximum levels of lipid recovery and minimal changes to lipid composition during liposome preparation protocols. We expect our results can be leveraged for improved preparation of model membranes by researchers in many fields.

RP-HPLC-CAD method for the rapid analysis of lipids used in lipid nanoparticles derived from dual centrifugation

The use of lipids as suitable excipients for drug carrier systems has been established for years. Liposomes or lipid nanoparticles (LNPs) in general have been shown capable of delivering both hydrophilic and hydrophobic drugs. The Covid-19 pandemic and the resulting vaccines have significantly increased interest in the potential for these lipid-based systems, which can carry different types of therapeutic RNAs. LNPs used for the transfection of RNA are usually a multi-component mixture of phospholipids and other lipids. Essential components are positively charged or ionizable lipids such as DOTAP or SM-102, but also uncharged helper lipids such as cholesterol, DOPE, DSPC, DMG-PEG2000 or DSPE-PEG2000. Due to the differences in charge, simultaneous detection is a challenge. Here, we present a reversed-phase high-performance liquid chromatography charged-aerosol-detector method (RP-HPLC-CAD method) using a C-18 column for the simultaneous determination of charged and uncharged lipids. Our method has been validated according to the ICH-Q2 (R2) guideline for accuracy, precision, specificity and working range, including the limit of detection (LOD) and quantification (LOQ), as well as the calibration range. We were able to show satisfactory results in both precision and accuracy. The working range also shows great potential with a calibration range from 9.375 to 1000 μg/ml, LODs <1.85 μg/ml and LOQs <6.16 μg/ml. This method represents a fast and reproducible procedure for quantifying the lipids mentioned. In combination with the novel approach for the production of LNPs using dual centrifugation (DC), it offers the possibility of extremely rapid production of RNA-loaded LNPs, and the immediate analysis for their lipid components.

The Chemical Reactivity of Membrane Lipids

It is well-known that aqueous dispersions of phospholipids spontaneously assemble into bilayer structures. These structures have numerous applications across chemistry and materials science and form the fundamental structural unit of the biological membrane. The particular environment of the lipid bilayer, with a water-poor low dielectric core surrounded by a more polar and better hydrated interfacial region, gives the membrane particular biophysical and physicochemical properties and presents a unique environment for chemical reactions to occur. Many different types of molecule spanning a range of sizes, from dissolved gases through small organics to proteins, are able to interact with membranes and promote chemical changes to lipids that subsequently affect the physicochemical properties of the bilayer. This Review describes the chemical reactivity exhibited by lipids in their membrane form, with an emphasis on conditions where the lipids are well hydrated in the form of bilayers. Key topics include the following: lytic reactions of glyceryl esters, including hydrolysis, aminolysis, and transesterification; oxidation reactions of alkenes in unsaturated fatty acids and sterols, including autoxidation and oxidation by singlet oxygen; reactivity of headgroups, particularly with reactive carbonyl species; and E/Z isomerization of alkenes. The consequences of reactivity for biological activity and biophysical properties are also discussed.

Monitoring stability indicating impurities and aldehyde content in lipid nanoparticle raw material and formulated drugs

Lipid nanoparticles (LNPs) are designed to protect and transport sensitive payloads or active pharmaceutical ingredients as part of new therapeutic modalities. As a multi-component particle, a high degree of quality control is necessary to ensure raw materials are free of critical impurities that could adversely impact the drug product. In this study, we demonstrate a reversed phase liquid chromatography method hyphenated with a single quadrupole mass spectrometer (RPLC-MS) as an alternative platform to methods that incorporate evaporative light scattering or charged aerosol detectors in the detection and quantitation of critical impurities associated with LNPs. The proposed RPLC-MS method offers an increase of up to 2 orders of magnitude in dynamic range and 3 orders of magnitude in sensitivity in the analysis of impurities associated with LNPs compared to conventional detectors. Access to complementary mass data enabled the detection and identification of stability indicating impurities as part of stress studies carried out on an ionizable lipid. In addition to confirmation of peak identity, complementary mass data was also used to assess residual aldehydes in raw material and formulated LNPs in accordance with regulatory guidance. Following derivatization using 2,4-dinitrophenylhydrazine, aldehyde content in the ionizable lipid raw material was determined to exceed the reporting threshold of 0.05% in 30% of the test cases. The experimental findings observed in this study demonstrate the utility of the proposed RPLC-MS method in the identification and monitoring of stability-indicating attributes associated with LNPs as part of current Good Manufacturing Practices for improved consumer safety in drug products.

Optimization of HPLCCAD method for simultaneous analysis of different lipids in lipid nanoparticles with analytical QbD

Since lipid nanoparticles (LNP) have emerged as a potent drug delivery system, the objective of this study was to develop and optimize a robust high-performance liquid chromatography with charged aerosol detectors (HPLCCAD) method to simultaneously quantify different lipids in LNPs using the analytical quality by design (AQbD) approach. After defining analytical target profile (ATP), critical method attributes (CMAs) were established as a resolution between the closely eluting lipid peaks and the total analysis time. Thus, potential high-risk method parameters were identified through the initial risk assessment. These parameters were screened using Plackett-Burman design, and three critical method parameters (CMPs)-MeOH ratio, flow rate, and column temperature-were selected for further optimization. Box-Behnken design was employed to develop the quadratic models that explain the relationship between the CMPs and CMAs and to determine the optimal operating conditions. Moreover, to ensure the robustness of the developed method, a method operable design region (MODR) was established using the Monte Carlo simulation. The MODR was identified within the probability map, where the risk of failure to achieve the desired CMAs was less than 1%. The optimized method was validated according to the ICH guidelines (linearity: R2 > 0.995, accuracy: 97.15-100.48% recovery, precision: RSD < 5%) and successfully applied for the analysis of the lipid in the LNP samples. The development of the analytical method to quantify the lipids is essential for the formulation development and quality control of LNP-based drugs since the potency of LNPs is significantly dependent on the compositions and contents of the lipids in the formation.

A rapid and quantitative reversed-phase HPLC-DAD/ELSD method for lipids involved in nanoparticle formulations

Lipid nanoparticles (LNPs) have shown great success as drug delivery systems, especially for mRNA vaccines, as those developed during the Covid-19 pandemics. Lipid analysis is critical to monitor the formulation process and control the quality of LNPs. The present study is focused on the development and validation of a high-performance liquid chromatography – diode array detector –evaporative light scattering detector (HPLC-DAD/ELSD) based method for the simultaneous quantification of 7 lipids, illustrating the main components of LNPs: ionizable lipids, the neutral co-lipid cholesterol, phospholipids, hydrophilic polymer-lipids for colloidal stability (e.g., a PEGylated lipid). In particular, this study focuses on two innovative synthetic lipids: a switchable cationic lipid (CSL3) which has demonstrated in vitro and in vivo siRNA transfection abilities, and the palmitic acid-grafted-poly(ethyloxazoline)₅₀₀₀ (PolyEtOx), used as an alternative polymer to address allergic reactions attributed to PEGylated lipids. The HPLC separation was achieved on a Poroshell C18 column at 50 °C using a step gradient of a mobile phase composed of water/methanol mixtures with 0.1% (v/v) trifluoroacetic acid (TFA). This method was validated following ICH Q2(R1) & (R2) guidelines in terms of linearity (R² ≥ 0.997), precision (relative standard deviation on peak areas < 5% for intermediate repeatability), accuracy (recoveries between 92.9% and 108.5%), and sensitivity. Indeed, low detection and quantitation limits were determined (between 0.02 and 0.04 µg and between 0.04 and 0.10 µg, respectively). Due to its high selectivity, this method allowed the analysis of lipid degradation products produced through degradation studies in basic, acidic, and oxidative conditions. Moreover, the method was successfully applied to the analysis of several liposome formulations at two key steps of the development process. Consequently, the reported HPLC method offers fast, versatile, selective and quantitative analysis of lipids, essential for development optimization, chemical characterization, and stability testing of LNP formulations.

Comparison of Physicochemical Properties of LipoParticles as mRNA Carrier Prepared by Automated Microfluidic System and Bulk Method

Polymeric and/or lipid platforms are promising tools for nucleic acid delivery into cells. We previously reported a lipid–polymer nanocarrier, named LipoParticles, consisting of polylactic acid nanoparticles surrounded by cationic lipids, and allowing the addition of mRNA and cationic LAH4-1 peptide at their surface. Although this mRNA platform has shown promising results in vitro in terms of mRNA delivery and translation, the bulk method used to prepare LipoParticles relies on a multistep and time-consuming procedure. Here, we developed an automated process using a microfluidic system to prepare LipoParticles, and we compared it to the bulk method in terms of morphology, physicochemical properties, and ability to vectorize and deliver mRNA in vitro. LipoParticles prepared by microfluidic presented a smaller size and more regular spherical shape than bulk method ones. In addition, we showed that the total lipid content in LipoParticles was dependent on the method of preparation, influencing their ability to complex mRNA. LipoParticles decorated with two mRNA/LAHA-L1 ratios (1/20, 1/5) could efficiently transfect mouse DC2.4 cells except for the automated 1/5 assay. Moreover, the 1/5 mRNA/LAHA-L1 ratio drastically reduced cell toxicity observed in 1/20 ratio assays. Altogether, this study showed that homogeneous LipoParticles can be produced by microfluidics, which represents a promising platform to transport functional mRNA into cells.

Simultaneous Chromatographic Quantitation of Drug Substance and Excipients in Nanoformulations Using a Combination of Evaporative Light Scattering and Absorbance Detectors

Nanomedicines including lipid- and polymer-based nanoparticles and polymer-drug conjugates enable targeted drug delivery for the treatment of numerous diseases. Quantitative analysis of components in nanomedicines is routinely performed to characterize the products to ensure quality and property consistency but has been mainly focused on the active pharmaceutical ingredients (APIs) in academic publications. It has been increasingly recognized that excipients in nanomedicines are critical in determining the product quality, stability, consistency, and safety. APIs are often analyzed by high-performance liquid chromatography (HPLC), and it would be convenient if the same method can be applied to excipients to robustly quantify all components in nanomedicines. Here, we report the development of a HPLC method that combined an evaporative light scattering (ELS) detector with an UV-vis detector to simultaneously analyze drugs and excipients in nanomedicines. This method was tested on diverse nanodrug delivery systems, including a niosomal nanoparticle encapsulating a phytotherapeutic, a liposome encapsulating an immune boosting agent, and a PEGylated peptide. This method can be utilized for a variety of applications, such as monitoring drug loading, studying drug release, and storage stability. The information obtained from the analyses is of importance for nanomedicine formulation development.

Analysis of verteporfin liposomal formulations for phospholipids and phospholipid degradation products by liquid chromatography-mass spectrometry (LC-MS)

Lipid composition and lipid degradation are critical to the stability of liposomal formulations which can impact the safety and efficacy of the drug. Herein we developed and validated an ultrahigh performance liquid chromatography coupled with quadrupole time of flight mass spectrometry (UPLC-QTOF-MS) method for determining phospholipid composition and phospholipid degradation products in a verteporfin liposomal formulation (Visudyne). The high mass accuracy (<5 ppm) of the QTOF method coupled with database searching (SimLipid) and comparison with known standards accurately identified and quantified the phospholipid compositions and lipid degradation products. The analysis of Visudyne indicated that more than 50% (w/w) of the total phospholipids are composed of phosphatidylcholine (PC) 14:0-14:0 and major phosphatidylglycerol (PG) species found are PG 16:0-18:2, PG 16:0-18:1, PG 18:0-18:2, and PG 18:0-18:1. The LC-MS method developed is capable of separating structural isomers such as PG 18:1-18:1 versus PG 18:0-18:2 and the separation of PG stereoisomers, such as PG 18:1-18:1 cis and PG 18:1-18:1 trans. The major lipid degradation products in Visudyne includes lysophosphatidylcholine and a few saturated and unsaturated lysophosphatidylglycerols, and free fatty acids (FFA). Each degradation product is less than 1% of the total phospholipids (w/w). In addition, the lipid profiles of naturally sourced egg PG from six different vendors were compared with the PG composition in Visudyne. Differences in lipid composition in egg PGs from different vendors were observed and the PG composition in Visudyne is matched with the lipid profile of the some of the egg PGs from different vendors. Drug developers can utilize this method to assess raw materials and lipid-based drug product quality and regulatory scientists can monitor the quality of the drug available in the market using this validated method.

Determination of lipid content and stability in lipid nanoparticles using ultra high-performance liquid chromatography in combination with a Corona Charged Aerosol Detector

For many years, lipid nanoparticles (LNPs) have been used as delivery vehicles for various payloads (especially various oligonucleotides and mRNA), finding numerous applications in drug and vaccine development. LNP stability and bilayer fluidity are determined by the identities and the amounts of the various lipids employed in the formulation and LNP efficacy is determined in large part by the lipid composition which usually contains a cationic lipid, a PEG‐lipid conjugate, cholesterol, and a zwitterionic helper phospholipid. Analytical methods developed for LNP characterization must be able to determine not only the identity and content of each individual lipid component (i.e., the parent lipids), but also the associated impurities and degradants. In this work, we describe an efficient and sensitive reversed‐phase chromatographic method with charged aerosol detection (CAD) suitable for this purpose. Sample preparation diluent and mobile phase pH conditions are critical and have been optimized for the lipids of interest. This method was validated for its linearity, accuracy, precision, and specificity for lipid analysis to support process and formulation development for new drugs and vaccines.

A validated 1H-NMR method for quantitative analysis of DOTAP lipid in nanoliposomes containing soluble Leishmania antigen

Leishmaniasis is a serious health problem that needs a suitable vaccine delivery system to control the disease. Cationic lipids such as 1, 2-dioleoyl-3-trimethylammonium-propane (DOTAP) have been widely used in nanoliposomes' formulation to deliver antigen and adjuvant at the same time to induce protection against Leishmaniasis. Therefore, it is necessary to accurately quantify DOTAP concentration in the formulation and biological materials. Due to the poor UV absorbance of DOTAP, the use of the conventional HPLC-UV method was impossible. Currently, an evaporative light scattering detector (ELSD) or MS/MS detector in conjunction with HPLC is used to quantify DOTAP. These methods have several disadvantages, including time- consuming during extraction procedure and decrease or/and even remove some components of the formulation. According to the advantages of the quantitative ¹H Nuclear Magnetic Resonance (¹H-NMR) spectroscopic method, a free extraction approach was developed to the assay of DOTAP in nanoliposomes containing Leishmania antigens. This method was carried out based on the relative ratio of signal integration of DOTAP [CH₂ (CH₂-CH = CH-CH₂)] in δ 2 ppm to a definite amount of an internal standard called dimethyl sulfone (DMSO₂). The q¹H-NMR method showed good precision (intra-day RSD = 1.8 % and inter-day RSD = 2.5 %), linearity (in the ranges of 1.3-7.8 mg. mL^-1 with correlation coefficients at 1), repeatability (RSD ≤ 2.39 %), and stability (RSD ≤ 2.32 %) for the quantification of the DOTAP without any extraction method. Considering all the experiments conducted in this study, NMR can be a feasible alternative to other traditional techniques for the simultaneous quantification of lipids in liposome formulations.

A Reliable HPLC-ELSD Method for Determination of Cholesterol, Phosphatidylcholine, Lysophosphatidylcholine Content and the Stability of a Liposomal Formulation

Background:

Liposomes continue to play an important role in drug delivery research due to their ability to improve transport and targeting of a wide range of active molecules. Analysis of liposomal components is a key point in the characterization and evaluation of formulation stability. The aim of this work was to develop and validate an HPLC-ELSD method for the characterization and quality control of liposomes.

Methods:

HPLC-ELSD method was validated by assessing selectivity, linearity, precision, accuracy, limit of detection and quantitation. The mobile phase consisted of a 0.1% (v/v) of trifluoroacetic acid (TFA) and methanol in gradient elution. Initial rate was 20:80 (0.1% TFA: methanol), with a ramp reaching 100% methanol. HPLC-MS/MS was used to confirm the presence of the fatty acid mixture in the analyzed lipids, as well as sub-products generated under pre-determined conditions in the stability study.

Results:

A HPLC-ELSD method has been developed to detect and measure cholesterol, phosphatidylcholine and lysophosphatidylcholine. High specificity, sensitivity and linearity within the predetermined range for all the compounds analyzed (R2>0.99) were obtained. Accuracy and precision results for all the compounds were within the acceptance limit of ≤5% and 90-110%, respectively. Mass spectrometry results showed complementary information about the phospholipid composition to evaluate the degree of degradation of liposomes over different storage conditions.

Conclusion:

The method was successfully applied as a quality control tool for the analysis of a wide range of lipids, present in liposomal formulations. HPLC-MS/MS was used to ensure complete elucidation of the lipid components and the detected lyso-forms.

Simultaneous Quantification of DPPG, DEPC and Cholesterol in Propofol Liposome by HPLC-ELSD Using Alkaline Hydrolysis

A high-performance liquid chromatography method with evaporative light-scattering detection (ELSD) was performed for simultaneous determination of dipalmitoyl phosphatidylglycerol (DPPG), dierucoyl phosphatidylcholine (DEPC) and cholesterol in propofol liposome by the pretreatment of alkaline hydrolysis (temperature, concentration of KOH anhydrous ethanol solution and reaction time were 90°C, 1 mol · L-1 and 10 min, respectively). The analysis was carried out on an Agilent TC-C18 column (4.6 mm × 250 mm, 5 μm) with isocratic elution of methanol and 0.1% acetic acid aqueous solution (95:5, v/v) at a flow rate of 1.0 mL · min-1. The column temperature was 30°C. The drift tube temperature of the ELSD system was set at 30°C, and the pressure of carrier gas was 350 KPa. The regression equation revealed a good linear relationship (r = 0.9990-0.9993) during the test ranges. The RSD of stability and repeatability (n = 6) was found to be less than 1.96 and 1.46%, respectively. The average recoveries ranged from 97.90 to 101.00%. The proposed method was validated and showed good precision, stability, repeatability and recovery, which indicated that the method could be readily utilized as a quality evaluation method for the determination of DPPG, DEPC and cholesterol in propofol liposome.

Determination of Cholesterol and its Derivatives in Nanoliposomes as Drug Delivery Conveyances by HPLC-UV: A Simple, Accurate and Cost-Effective Method Development and Validation Approach

Nanoliposomes are extensively used as ideal vehicles in drug delivery systems due to their unique biocompatibility and biodegradability properties. They can be used as sustained release and target selective conveyances to deliver the encapsulated drugs at specific cells or tissues by improving their efficacy along with reducing the side effects. As an analytical perspective, the determination of various lipid components in the final formulation is one of the practical issues while the agents are applied in an industrial-scale. Herein, the maximum ultra violet (UV) absorbances for the most of the lipids are within 200-210 nm that cause significant cut-off conflicts with the general solvents or additives of high-performance liquid chromatography (HPLC) during its method development procedure. In this study, a simple, accurate and cost-effective isocratic HPLC-UV method has been successfully developed for the simultaneous determination of α-(3-O-cholesteryloxy)-δ-(N-ethylmorpholine)-succineamide (MoChol), cholesteryl-hemisuccinate (Chems) and Cholesterol in nanoliposomes drug carriers containing an active pharmaceutical ingredient (anti-BCL-2 DNA oligonucleotide). The isocratic mobile phase consisted of ethanol/acetonitrile/water including trifluoroacetic acid (60/30/10 with 0.1% v/v, respectively) at a flow rate of 1.0 mL min-1 was run through a commercial reverse-phase C18 analytical column while UV detector was set at 202 nm. To confirm the applicability, a full validation of the proposed method was performed according to the International Council for Harmonization (ICH) guidelines.

Electrospray for generation of drug delivery and vaccine particles applied in vitro and in vivo

Also known as electrospray, electrohydrodynamic atomization has been used extensively in the last 15 years to develop polymer-based particles for drug delivery in cell and animal models. More recently, novel core-shell, multi-axial, and other electrospray particles have been developed from an array of polymers for a variety of biomedical applications. This review focuses on electrospray as a novel method of particle fabrication for drug delivery, specifically highlighting the applications of these particle systems in cell culture and animal models while also discussing polymers used for particle fabrication. Applications of electrospray particles to treat glioma, ovarian cancer, and breast cancer are reviewed. Additionally, delivery of antibiotics, gene therapy, and bacterial cells formulated in electrospray particles is discussed. Finally, vaccines as well as drug eluting particles for differentiation of stem cells and tissue engineering are highlighted. The article concludes with a discussion of where the future of electrospray technology can go to strengthen its foothold in the biomedical field.

Development and validation of a novel UPLC-ELSD method for the assessment of lipid composition of nanomedicine formulation

Lipid nanocarriers incorporating glycerides, polyethylene glycol (PEG)-stearates and phospholipids have attracted great attention for in vivo diagnostic, in vivo imaging, activated or non-activated targeted drug delivery. For quality control purposes, the development of appropriate methods for the quantification of their lipid components is needed. In the present study, we developed an analytical method for lipid quantification in formulated nanoparticles. PEG-stearates and glycerides were analyzed in a single run by RP-UPLC-ELSD using a two-step gradient elution program, while the analysis of phospholipids was accomplished by HILIC-UPLC-ELSD after isolation using an SPE silica column. Using both isolated compounds and commercial lipid standards, calibration curves were produced using second-order polynomials to attain the quantitative evaluation of each lipid excipient. Relative standard deviation of all analytes was between 0.9% and 5.3% for intra-day precision and recovery ranged from 83.5% to 112.2%. The presented method was successfully implemented to study the manufacturing process and stability of the formulated lipid excipients during long-term storage and accelerated conditions. The formulation lipid yield was determined and found equal to 82.5%.

Anti-inflammatory role of TPCA-1 encapsulated nanosomes in porcine chondrocytes against TNF-α stimulation

In this study, we evaluated the hypothesis that immunonanosomes carrying the drug [5-(p-Fluorophenyl)-2-ureido]thiophene-3-carboxamide (TPCA-1) will help in reducing nuclear factor-kappaB (NF-κB)-associated inflammation in porcine chondrocytes against tumor necrosis factor-alpha (TNF-α)-induced stress. The nanosomes were tagged with monoclonal anti-type II collagen (MabCII) antibody to specifically target the exposed type II collagen in cartilage matrix. TPCA-1 at a concentration of 10 µM significantly reduced expression of the matrix-degrading enzyme, Matrix metalloproteinase-13 (MMP-13) and blocked the p65 nuclear translocation. In comparison to the TPCA-1 solution alone, the TPCA-1 nanosomes were found to be more effective in reducing the cellular toxicity, oxidative stress and inflammation in chondrocytes treated with TNF-α. In addition, TPCA-1 nanosomes were more effective in reducing the gene expression of hypoxia-inducible factor-2alpha (HIF-2α) that in turn is associated with the regulation of MMP-13 gene. TPCA-1 nanosomes significantly reduced expression of both these genes. The data also showed that TPCA-1 did not attenuate the down-regulated gene expression levels of anabolic genes aggrecan (ACAN) and collagen type II alpha (COL2A1). In conclusion, this study showed that TPCA-1 nanosomes carrying a dose of 10 µM TPCA-1 can effectively increase the survival of cultured porcine chondrocytes against TNF-α-induced stress. The findings of this study could be used to develop nanosome-based drug delivery systems (DDSs) for animal model of OA. Moreover, the approach presented here can be further utilized in other studies for targeted delivery of the drug of interest at a cellular level.

Quantification of Lipids: Model, Reality, and Compromise

Lipids are key molecules in various biological processes, thus their quantification is a crucial point in a lot of studies and should be taken into account in lipidomics development. This family is complex and presents a very large diversity of structures, so analyzing and quantifying all this diversity is a real challenge. In this review, the different techniques to analyze lipids will be presented: from nuclear magnetic resonance (NMR) to mass spectrometry (with and without chromatography) including universal detectors. First of all, the state of the art of quantification, with the definitions of terms and protocol standardization, will be presented with quantitative lipidomics in mind, and then technical considerations and limitations of analytical chemistry's tools, such as NMR, mass spectrometry and universal detectors, will be discussed, particularly in terms of absolute quantification.

Engineering of small interfering RNA-loaded lipidoid-poly(DL-lactic-co-glycolic acid) hybrid nanoparticles for highly efficient and safe gene silencing: A quality by design-based approach

Safety and efficacy of therapeutics based on RNA interference, e.g., small interfering RNA (siRNA), are dependent on the optimal engineering of the delivery technology, which is used for intracellular delivery of siRNA to the cytosol of target cells. We investigated the hypothesis that commonly used and poorly tolerated cationic lipids might be replaced with more efficacious and safe lipidoids as the lipid component of siRNA-loaded lipid-polymer hybrid nanoparticles (LPNs) for achieving more efficient gene silencing at lower and safer doses. However, formulation design of such a complex formulation is highly challenging due to a strong interplay between several contributing factors. Hence, critical formulation variables, i.e. the lipidoid content and siRNA:lipidoid ratio, were initially identified, followed by a systematic quality-by-design approach to define the optimal operating space (OOS), eventually resulting in the identification of a robust, highly efficacious and safe formulation. A 17-run design of experiment with an I-optimal approach was performed to systematically assess the effect of selected variables on critical quality attributes (CQAs), i.e. physicochemical properties (hydrodynamic size, zeta potential, siRNA encapsulation/loading) and the biological performance (in vitro gene silencing and cell viability). Model fitting of the obtained data to construct predictive models revealed non-linear relationships for all CQAs, which can be readily overlooked in one-factor-at-a-time optimization approaches. The response surface methodology further enabled the identification of an OOS that met the desired quality target product profile. The optimized lipidoid-modified LPNs revealed more than 50-fold higher in vitro gene silencing at well-tolerated doses and approx. a twofold increase in siRNA loading as compared to reference LPNs modified with the commonly used cationic lipid dioleyltrimethylammonium propane (DOTAP). Thus, lipidoid-modified LPNs show highly promising prospects for efficient and safe intracellular delivery of siRNA.

Rapid Quantification and Validation of Lipid Concentrations within Liposomes

Quantification of the lipid content in liposomal adjuvants for subunit vaccine formulation is of extreme importance, since this concentration impacts both efficacy and stability. In this paper, we outline a high performance liquid chromatography-evaporative light scattering detector (HPLC-ELSD) method that allows for the rapid and simultaneous quantification of lipid concentrations within liposomal systems prepared by three liposomal manufacturing techniques (lipid film hydration, high shear mixing, and microfluidics). The ELSD system was used to quantify four lipids: 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), cholesterol, dimethyldioctadecylammonium (DDA) bromide, and d-(+)-trehalose 6,6′-dibehenate (TDB). The developed method offers rapidity, high sensitivity, direct linearity, and a good consistency on the responses (R² > 0.993 for the four lipids tested). The corresponding limit of detection (LOD) and limit of quantification (LOQ) were 0.11 and 0.36 mg/mL (DMPC), 0.02 and 0.80 mg/mL (cholesterol), 0.06 and 0.20 mg/mL (DDA), and 0.05 and 0.16 mg/mL (TDB), respectively. HPLC-ELSD was shown to be a rapid and effective method for the quantification of lipids within liposome formulations without the need for lipid extraction processes.

A versatile, quantitative analytical method for pharmaceutical relevant lipids in drug delivery systems

Over the past few years, liposomal formulations as drug carrier systems have markedly advanced in pharmaceutical research and development. Therefore, analytical methods to characterize liposome-based formulations are required. One particular issue in liposome analysis is the imbalance of lipid ratios within the vesicle formulations and the detectability of degradation products such as lysophospholipids and fatty acids caused by hydrolysis, especially in low molar ranges. Here, a highly sensitive and selective reversed-phase high-performance liquid chromatography (rp-HPLC) method is described by the combination of an organic solvent/trifluoroacetic acid (TFA) triggered gradient and the application of an evaporative light scattering detector (ELSD). Gain setting adjustments of the ELSD were applied to obtain an optimal detection profile of the analyzed substances. This optimization provides simultaneous separation and quantification of 16 components, including different phosphatidylcholines, phosphatidylglycerols and their degradation products, as well as cholesterol. Parameters such as limit of detection (LOD) and limit of quantification (LOQ) were determined for each of the components and had ranges from 0.25-1.00mg/mL (LOD) and 0.50-2.50μg/mL (LOQ), respectively. The intra-day precision for all analytes is less than 3% (RSD) and inter-day precision is about 8%. The applicability of the method was verified by analyzing two different liposome formulations consisting of DSPC:DPPC:DSPG:Chol (35:35:20:10) and DSPC:DPPC:DSPG (38:38:24). For degradation studies, both formulations were stored at 4°C and at ambient temperature. Additionally, forced degradation experiments were performed to determine hydrolysis mass balances. A total recovery of 96-102% for phospholipid compounds was found. Analytical data revealed that the sensitivity, selectivity, accuracy, and resolution are appropriate for the detection and quantification of phospholipids and their hydrolysis products. These results as well as additional preliminary analyses of other relevant components used in liposomal formulations indicate that the developed method is suitable for the development, characterization, and stability testing of liposomal based biopharmaceuticals.

Selecting analytical tools for characterization of polymersomes in aqueous solution

We present 17 techniques to analyze polymersomes, in terms of their size, bilayer properties, elastic properties or surface charge.

Simultaneous determination of polyethylene glycol-conjugated liposome components by using reversed-phase high-performance liquid chromatography with UV and evaporative light scattering detection

Liposomes incorporating polyethylene glycol (PEG)-conjugated lipids (PEGylated liposomes) have attracted attention as drug delivery carriers because they show good in vivo stability. The lipid component of PEGylated liposomal formulations needs to be quantified for quality control. In this study, a simple reversed-phase high-performance liquid chromatography (HPLC) method with an evaporative light-scattering detector (ELSD) was established for simultaneous determination of hydrogenated soy phosphatidylcholine, cholesterol, PEG-conjugated lipid, and hydrolysis products of phospholipid in PEGylated liposomal formulations. These lipids were separated using a C18 column with a gradient mobile phase consisting of ammonium acetate buffer and ammonium acetate in methanol at a flow rate of 1.0 ml/min. This method provided sufficient repeatability, linearity, and recovery rate for all lipids. However, the linearity and recovery rates of cholesterol achieved using a ultraviolet (UV) detector were better than those achieved using an ELSD. This validated method can be applied to assess the composition change during the preparation process of liposomes and to quantify lipid components and hydrolysis products contained in a commercially available liposomal formulation DOXIL®. Taken together, this reversed-phase HPLC-UV/ELSD method may be useful for the rapid or routine analysis of liposomal lipid components in process development and quality control.

Comparison of the depot effect and immunogenicity of liposomes based on dimethyldioctadecylammonium (DDA), 3β-[N-(N',N'-Dimethylaminoethane)carbomyl] cholesterol (DC-Chol), and 1,2-Dioleoyl-3-trimethylammonium propane (DOTAP): prolonged liposome retention mediates stronger Th1 responses

The immunostimulatory capacities of cationic liposomes are well-documented and are attributed both to inherent immunogenicity of the cationic lipid and more physical capacities such as the formation of antigen depots and antigen delivery. Very few studies have however been conducted comparing the immunostimulatory capacities of different cationic lipids. In the present study we therefore chose to investigate three of the most well-known cationic liposome-forming lipids as potential adjuvants for protein subunit vaccines. The ability of 3β-[N-(N',N'-dimethylaminoethane)carbomyl] cholesterol (DC-Chol), 1,2-dioleoyl-3-trimethylammonium propane (DOTAP), and dimethyldioctadecylammonium (DDA) liposomes incorporating immunomodulating trehalose dibehenate (TDB) to form an antigen depot at the site of injection (SOI) and to induce immunological recall responses against coadministered tuberculosis vaccine antigen Ag85B-ESAT-6 are reported. Furthermore, physical characterization of the liposomes is presented. Our results suggest that liposome composition plays an important role in vaccine retention at the SOI and the ability to enable the immune system to induce a vaccine specific recall response. While all three cationic liposomes facilitated increased antigen presentation by antigen presenting cells, the monocyte infiltration to the SOI and the production of IFN-γ upon antigen recall was markedly higher for DDA and DC-Chol based liposomes which exhibited a longer retention profile at the SOI. A long-term retention and slow release of liposome and vaccine antigen from the injection site hence appears to favor a stronger Th1 immune response.