Combined application of dispersive liquid–liquid microextraction based on the solidification of floating organic droplets and charged aerosol detection for the simple and sensitive quantification of macrolide antibiotics in human urine

Determination of metronidazole and clarithromycin in plasma samples using surfactant-modified amorphous carbon-based DSPE combined with DLLME followed by HPLC

This work offers preparation of surfactant-modified amorphous carbon and its application in dispersive solid phase extraction of metronidazole and clarithromycin from plasma samples. The extraction procedure was combined with dispersive liquid-liquid microextraction for further preconcentration of the analytes for sensitive determination of the analytes followed by high performance liquid chromatography-diode array detector. In this work, first, the sorbent was added to the sample and the mixture vortexed to adsorb the analytes. Then, the obtained supernatant after centrifuging is discarded and the loaded analytes onto the sorbent surface were eluted with a water-miscible organic solvent. In the following, to further enrichment of the analytes the microextraction step was done. For this purpose, the eluate is taken, mixed with a water-immiscible organic solvent, and injected into deionized water. After centrifuging, an aliquat of the sedimented phase is taken and injected into the analytical instrument for the quantitative analysis. Under the optimum extraction conditions, high extraction recoveries (79 and 89% for metronidazole and clarithromycin, respectively), low limits of detection (2.1 and 1.9 ng mL^-1 for metronidazole and clarithromycin, respectively) and quantification (7.0 and 6.3 ng mL^-1 for metronidazole and clarithromycin, respectively), good repeatability (relative standard deviations less than 4.3% for intra- and 6.3% inter-day precisions), and wide linear ranges (7.3-1000 and 6.3-1000 ng mL^-1 for metronidazole and clarithromycin, respectively) were obtained. At the end, the introduced method was applied on the plasma samples of the patients treated with metronidazole and clarithromycin successfully.

Dispersive solid phase extraction of metronidazole and clarithromycin from human plasma using a β-cyclodextrin grafted polyethylene polymer composite

In this work, for the first time, a polymeric composite based on β-cyclodextrin grafted with polyethylene has been prepared through ball milling and used as an efficient sorbent for dispersive solid phase extraction of metronidazole and clarithromycin from plasma samples. The prepared sorbent was characterized using Fourier transform infrared spectrophotometry, X-ray diffraction, and scanning electron microscopy. In the extraction process, after precipitating the proteins, the sorbent was added into the sample solution, and the mixture was vortexed to facilitate and speed up the sorption of the analytes onto the sorbent surface. After centrifuging, the sorbent particles were contacted with methanol to elute the analytes under the vortexing process. After this step, an aliquot of the eluate was taken and injected into high-performance liquid chromatography-diode array detector for quantitative analysis. Under the optimum extraction conditions, the extraction recoveries for metronidazole and clarithromycin were 76 and 83%, respectively. The limits of detection were 2.6 and 2.2 ng/ml for metronidazole and clarithromycin, respectively. The repeatability of the offered approach, expressed as relative standard deviation, was equal to or less than 4.7%. Finally, the method was successfully applied to plasma samples of the patients treated with metronidazole and clarithromycin.

Application of two glycosylated Lactobacillus surface layer proteins in coating cationic liposomes

The ability of isolated surface layer proteins (SLPs) to reassemble on suitable surfaces enables the application of SLPs in various fields of nanotechnology. In this work, SLPs from Lactobacillus buchneri BNCC 187,964 and L. kefir BNCC 190,565 were extracted and verified as glycosylated proteins. They were applied to coat on the surface of cationic liposomes. The absorption of the two SLPs on liposomes induced the zeta potential reduction and particle size increase. The two kinds of SLP-coated liposomes demonstrated better thermal, light and pH stability than the control liposomes. And the L. kefir SLP showed better protective effects than the L. buchneri SLP. Moreover, both of the SLPs could endow liposomes with the function of binding ferritin as observed by transmission electron microscope. Fourier transform infrared spectroscopy illustrated that the interaction between the two SLPs and liposomes was similar. The recrystallization of the two SLPs on the liposomes might drive the lipid into a higher order state and hydrogen bonds were formed between the two SLPs and the liposomes. All the findings demonstrated that L. kefir SLP and L. buchneri SLP had great potential to be explored as effective coating agents to improve the stability and function of cationic liposomes.Please check and confirm that the authors and their respective affiliations have been correctly identified and amend if necessary.Yes, all have been checked.

A short review of human exposure to antibiotics based on urinary biomonitoring

Antibiotics play a role in preventing and treating infectious diseases and also contribute to other health risks for humans. With the overuse of antibiotics, they are widely distributed in the environment. Long-term exposure to multiple antibiotics may occur in humans through medication and dietary intake. Therefore, it is critical to estimate daily intake and health risk of antibiotics based on urinary biomonitoring. This review compares the strengths and weaknesses of current analytical methods to determine antibiotics in urine samples, discusses the urinary concentration profiles and hazard quotients of individual antibiotics, and overviews correlations of antibiotic exposure with the risk of diseases. Liquid chromatography-tandem mass spectrometry is most applied to simultaneously determine multiple types of antibiotics at trace levels. Solid-phase extraction with a hydrophilic-lipophilic balance adsorbent is commonly used to extract antibiotics in urine samples. Fifteen major antibiotics with relatively higher detection frequencies and concentrations include sulfaclozine, trimethoprim, erythromycin, azithromycin, penicillin V, amoxicillin, oxytetracycline, chlortetracycline, tetracycline, doxycycline, ofloxacin, enrofloxacin, ciprofloxacin, norfloxacin, and florfenicol. Humans can be easily at microbiological effect-based risk induced by florfenicol, ciprofloxacin, azithromycin, and amoxicillin. Positive associations were observed between specific antibiotic exposure and obesity, allergic diseases, and mental disorders. Overall, the accessible, automated, and environmentally friendly methods are prospected for simultaneous determinations of antibiotics at trace level in urine. To estimate human exposure to antibiotics more accurately, knowledge gaps need to be filled up, including the transformation between parent and metabolic antibiotics, urinary excretion proportions of antibiotics at low-dose exposure and pharmacokinetic data of antibiotics in humans, and the repeated sampling over a long period in future research is needed. Longitudinal studies about antibiotic exposure and the risk of diseases in different developmental windows as well as in-depth research on the pathogenic mechanism of long-term, low-dose, and joint antibiotic exposure are warranted.

A review of pretreatment and analysis of macrolides in food (Update Since 2010)

Macrolides are versatile broad-spectrum antibiotics whose activity stems from the presence of a macrolide ring. They are widely used in veterinary medicine to prevent and treat disease. However, because of their improper use and the absence of effective regulation, these compounds pose a threat to human health and the environment. Consequently, simple, quick, economical, and effective techniques are required to analyze macrolides in animal-derived foods, biological samples, and environmental samples. This paper presents a comprehensive overview of the pretreatment and analytical methods used for macrolides in various sample matrices, focusing on the developments since 2010. Pretreatment methods mainly include liquid-liquid extraction, solid-phase extraction, matrix solid-phase dispersion, and microextraction methods. Detection and quantification methods mainly include liquid chromatography (coupled to mass spectrometry or other detectors), electrochemical methods, capillary electrophoresis, and immunoassays. Furthermore, a comparison between the pros and cons of these methods and prospects for future developments are also discussed.

Determination of Quinolone Antibiotic Residues in Human Serum and Urine Using High-Performance Liquid Chromatography/Tandem Mass Spectrometry

Quinolone antibiotic residues may pose potential threat to human health. A rapid and sensitive method was developed for the determination of quinolone residues in human serum and urine. After solid phase extraction (SPE) process, eight quinolone residues were analyzed by high-performance liquid chromatography/tandem mass spectrometry (HPLC-MS/MS) using ciprofloxacin-d8 as the internal standard. The relative standard deviation of intra-day and inter-day precision for the eight quinolones were less than 7.52% and the accuracies ranged from 95.8% to 103% in human serum, and from 94.1% to 104% in human urine. The extraction recoveries for the eight quinolones varied from 80.2% to 113% in human serum and 83.4% to 117% in human urine. The limit of detection for the eight quinolones was 0.50–1.00 ng/mL. Quinolone antibiotic residues in human serum and urine from 12 volunteers were successfully analyzed with the validated method. The SPE-HPLC-MS/MS method was useful for accurate determination of quinolone antibiotic residues in human body.

Present state and applications of single drop microextraction for the determination of harmful organic compounds and pollutants

Single drop microextraction (SDME) nowadays earns an increasing attention by scientists due to its simplicity, low cost and the need for only common laboratory equipment. This microextraction technique combines sample cleanup and pre-concentration of analytes in one step. Furthermore, a significant reduction in the amount of organic solvents needed comparing to standard LLE techniques places SDME into the position of environmental friendly extraction techniques. SDME is a straightforward technique in which a micro-drop of solvent is suspended from the tip of a conventional micro-syringe and then it is in a direct contact with a sample solution in which it is immiscible or it could be suspended in the headspace above the sample. The paper overviews developments of the state-of-the-art SDME techniques for the extraction of harmful organic compound and pollutants from environmental, food and biological matrices. Key extraction parameters essential for SDME performance were described and discussed.

Gene subtype analysis of Treponema pallidum for drug resistance to azithromycin

Azithromycin has been widely used for the treatment of Treponema pallidum. However, the drug resistance of T. pallidum for azithromycin is currently increasing. The aim of the present study was to analyze the association between gene subtypes of T. pallidum and drug resistance for azithromycin. The gene subtypes of T. pallidum were assayed by a polymerase chain reaction technique. Drug resistance of T. pallidum was analyzed using an antimicrobial susceptibility test. The results demonstrated that gene type tpr presented higher drug resistance compared with arp and tp0548 gene types of T. pallidum. Gene type tpr was identified as eight gene subtypes (14a/f, 14e/f, 12e/f, 12d/f, 6d/f, 11d/f, 14j/f and 8d/f) among 324 cases. It was identified that 23S rRNA A2058G mutation was observed in gene subtypes 14a/f, 14e/f and 12e/f. A2059G mutation occurred in the gene subtypes 8d/f, 12d/f, 6d/f, 11d/f and 14j/f. The proportions of azithromycin-resistant genotypes harboring either the A2058G or the A2059G mutation among the T. pallidum strains were 34.2 and 65.8%, respectively. The antimicrobial susceptibility test demonstrated that A2059G mutations exhibited a higher drug resistance for azithromycin compared with A2058G mutations. In conclusion, these results indicate that azithromycin resistance in T. pallidum is associated with gene subtype, which may contribute to the treatment of T. pallidum.

Application of hollow fiber liquid phase microextraction and dispersive liquid–liquid microextraction techniques in analytical toxicology

The recent developments in hollow fiber liquid phase microextraction and dispersive liquid –liquid microextraction are reviewed. Applications of these newly emerging developments in extraction and preconcentration of a vast category of compounds including heavy metals, pesticides, pharmaceuticals and abused drugs in complex matrices (environmental and biological matrices) are reviewed and discussed. The new developments in these techniques including the use of solvents lighter than water, ionic liquids and supramolecular solvents are also considered. Applications of these new solvents reduce the use of toxic solvents and eliminate the centrifugation step, which reduces the extraction time.

Ultrasound-assisted dispersive liquid-liquid microextraction based on the solidification of a floating organic droplet followed by gas chromatography for the determination of eight pyrethroid pesticides in tea samples

A novel ultrasound-assisted dispersive liquid-liquid microextraction based on solidification of floating organic droplet method (UA-DLLME-SFO) combined with gas chromatography (GC) was developed for the determination of eight pyrethroid pesticides in tea for the first time. After ultrasound and centrifugation, 1-dodecanol and ethanol was used as the extraction and dispersive solvent, respectively. A series of parameters, including extraction solvent and volume, dispersive solvent and volume, extraction time, pH, and ultrasonic time influencing the microextraction efficiency were systematically investigated. Under the optimal conditions, the enrichment factors (EFs) were from 292 to 883 for the eight analytes. The linear ranges for the analytes were from 5 to 100μg/kg. The method recoveries ranged from 92.1% to 99.6%, with the corresponding RSDs less than 6.0%. The developed method was considered to be simple, fast, and precise to satisfy the requirements of the residual analysis of pyrethroid pesticides.