Simultaneous analysis of antibiotics in biological samples by ultra high performance liquid chromatography-tandem mass spectrometry

Recent Trends in Therapeutic Drug Monitoring of Peptide Antibiotics

Antimicrobial peptides take a specific position in the field of antibiotics (ATBs), however, from a large number of available molecules only a few of them were approved and are used in clinics. These therapeutic modalities play a crucial role in the management of diseases caused by multidrug-resistant bacterial pathogens and represent the last-line therapy for bacterial infections. Therefore, there is a demand for a rationale use of such ATBs based on optimization of the dosing strategy to minimize the risk of resistance and ensure the sustainable efficacy of the drug in real clinical practice. Therapeutic drug monitoring, as a measurement of drug concentration in the body fluids or tissues, results in the optimization of the patient´s medication and therapy outcome. This strategy is beneficial and could result in tailored therapy for different types of infection and the prolongation of the use and efficacy of ATBs in hospitals. This review paper provides an actual overview of approved antimicrobial peptides used in clinical practice and covers current trends in their analysis by convenient and advanced methodologies used for their identification and/or quantitation in biological matrices for therapeutic drug monitoring purposes. Special emphasis is given to the methods with perspective clinical outcomes.

Spider chart, greenness and whiteness assessment of experimentally designed multivariate models for simultaneous determination of three drugs used as a combinatory antibiotic regimen in critical care units: Comparative study

In this study, five earth-friendly spectrophotometric methods using multivariate techniques were developed to analyze levofloxacin, linezolid, and meropenem, which are utilized in critical care units as combination therapies. These techniques were used to determine the mentioned medications in laboratory-prepared mixtures, pharmaceutical products and spiked human plasma that had not been separated before handling. These methods were named classical least squares (CLS), principal component regression (PCR), partial least squares (PLS), genetic algorithm partial least squares (GA-PLS), and artificial neural network (ANN). The methods used a five-level, three-factor experimental design to make different concentrations of the antibiotics mentioned (based on how much of them are found in the plasma of critical care patients and their linearity ranges). The approaches used for levofloxacin, linezolid, and meropenem were in the ranges of 3-15, 8-20, and 5-25 µg/mL, respectively. Several analytical tools were used to test the proposed methods' performance. These included the root mean square error of prediction, the root mean square error of cross-validation, percentage recoveries, standard deviations, and correlation coefficients. The outcome was highly satisfactory. The study found that the root mean square errors of prediction for levofloxacin were 0.090, 0.079, 0.065, 0.027, and 0.001 for the CLS, PCR, PLS, GA-PLS, and ANN models, respectively. The corresponding values for linezolid were 0.127, 0.122, 0.108, 0.05, and 0.114, respectively. For meropenem, the values were 0.230, 0.222, 0.179, 0.097, and 0.099 for the same models, respectively. These results indicate that the developed models were highly accurate and precise. This study compared the efficiency of artificial neural networks and classical chemometric models in enhancing spectral data selectivity for quickly identifying three antimicrobials. The results from these five models were subjected to statistical analysis and compared with each other and with the previously published ones. Finally, the whiteness of the methods was assessed by the recently published white analytical chemistry (WAC) RGB 12, and the greenness of the proposed methods was assessed using AGREE, GAPI, NEMI, Raynie and Driver, and eco-scale, which showed that the suggested approaches had the least negative environmental impact. Furthermore, to demonstrate solvent sustainability, a greenness index using a spider chart methodology was employed.

An eco-friendly and cost-effective HPTLC method for quantification of COVID-19 antiviral drug and co-administered medications in spiked human plasma

The coronavirus-2 has led to a global pandemic of COVID-19 with an outbreak of severe acute respiratory syndrome leading to worldwide quarantine measures and a rise in death rates. The objective of this study is to propose a green, sensitive, and selective densitometric method to simultaneously quantify remdesivir (REM) in the presence of the co-administered drug linezolid (LNZ) and rivaroxaban (RIV) in spiked human plasma. TLC silica gel aluminum plates 60 F254 were used as the stationary phase, and the mobile phase was composed of dichloromethane (DCM): acetone (8.5:1.5, v/v) with densitometric detection at 254 nm. Well-resolved peaks have been observed with retardation factors (Rf) of 0.23, 0.53, and 0.72 for REM, LNZ, and RIV, respectively. A validation study was conducted according to ICH Q2 (R1) Guidelines. The method was rectilinear over the concentration ranges of 0.2-5.5 μg/band, 0.2-4.5 μg/band and 0.1-3.0 μg/band for REM, LNZ and RIV, respectively. The sensitivities of REM, LIN, and RIV were outstanding, with quantitation limits of 128.8, 50.5, and 55.8 ng/band, respectively. The approach has shown outstanding recoveries ranging from 98.3 to 101.2% when applied to pharmaceutical formulations and spiked human plasma. The method's greenness was assessed using Analytical Eco-scale, GAPI, and AGREE metrics.

Liquid chromatography-tandem mass spectrometry methods for quantification of total and free antibiotic concentrations in serum and exudate from patients with post-sternotomy deep sternal wound infection receiving negative pressure wound therapy

BACKGROUND

Systemically administered antibiotics are thought to penetrate the wounds more effectively during negative pressure wound therapy (NPWT).To test this hypothesis total and free antibiotic concentrations were quantified in serum and wound exudate.

METHODS

UHPLC-MS/MS methods were developed and validated for the determination of ceftazidime, cefepime, cefotaxime, cefuroxime, cefazolin, meropenem, oxacillin, piperacillin with tazobactam, clindamycin, ciprofloxacin, sulfamethoxazole/trimethoprim (cotrimoxazole), gentamicin, vancomycin, and linezolid. The unbound antibiotic fraction was obtained by ultrafiltration using a Millipore Microcon-30kda Centrifugal Filter Unit. Analysis was performed on a 1.7-µm Acquity UPLC BEH C18 2.1 × 100-mm column with a gradient elution.

RESULTS

The validation was performed for serum, exudates and free fractions. For all matrices, requirements were met regarding linearity, precision, accuracy, limit of quantitation, and matrix effect. The coefficient of variation was in the range of 1.2-13.6%.and the recovery 87.6-115.6%, respectively. Among the 29 applications of antibiotics thus far, including vancomycin, clindamycin, ciprofloxacin, oxacillin, cefepime, cefotaxime, cotrimoxazole, and gentamicin, total and free antibiotic concentrations in serum and exudate were correlated.

CONCLUSION

This method can accurately quantify the total and free concentrations of 16 antibiotics. Comparison of concentration ratios between serum and exudates allows for monitoring individual antibiotics' penetration capacity in patients receiving NPWT.

Push forward LC-MS-based therapeutic drug monitoring and pharmacometabolomics for anti-tuberculosis precision dosing and comprehensive clinical management

The spread of tuberculosis (TB), especially multidrug-resistant TB and extensively drug-resistant TB, has strongly motivated the research and development of new anti-TB drugs. New strategies to facilitate drug combinations, including pharmacokinetics-guided dose optimization and toxicology studies of first- and second-line anti-TB drugs have also been introduced and recommended. Liquid chromatography-mass spectrometry (LC-MS) has arguably become the gold standard in the analysis of both endo- and exo-genous compounds. This technique has been applied successfully not only for therapeutic drug monitoring (TDM) but also for pharmacometabolomics analysis. TDM improves the effectiveness of treatment, reduces adverse drug reactions, and the likelihood of drug resistance development in TB patients by determining dosage regimens that produce concentrations within the therapeutic target window. Based on TDM, the dose would be optimized individually to achieve favorable outcomes. Pharmacometabolomics is essential in generating and validating hypotheses regarding the metabolism of anti-TB drugs, aiding in the discovery of potential biomarkers for TB diagnostics, treatment monitoring, and outcome evaluation. This article highlighted the current progresses in TDM of anti-TB drugs based on LC-MS bioassay in the last two decades. Besides, we discussed the advantages and disadvantages of this technique in practical use. The pressing need for non-invasive sampling approaches and stability studies of anti-TB drugs was highlighted. Lastly, we provided perspectives on the prospects of combining LC-MS-based TDM and pharmacometabolomics with other advanced strategies (pharmacometrics, drug and vaccine developments, machine learning/artificial intelligence, among others) to encapsulate in an all-inclusive approach to improve treatment outcomes of TB patients.

Young people exposure to antibiotics: Implication for health risk and the impact from eating habits of takeaway food

Exposure to antibiotics, mainly from animal food ingestion, may have adverse effects on human health. Takeaway food is the preferred choice for the dietary of most Chinese young people nowadays, but the relationship between takeaway eating and antibiotic exposure is not yet adequately understood. In the present study, 297 young people were recruited to collect urine samples and questionnaires with an emphasis on their takeaway eating habits. The internal exposure to 16 antibiotics and three metabolites was measured in urine samples by high-performance liquid chromatography-tandem mass spectrometry, as well as a DNA oxidative damage marker, 8-hydroxydeoxyguanosine (8-OHdG). At least one kind of antibiotic was found in over 90 % of urine samples, with total concentrations from 0.667 to 3.02 × 104 ng/mL. High exposure levels of antibiotics were more likely to be found in individuals with a larger body mass index. The concentrations of six antibiotics were significantly different among people with different overall weekly eating frequencies, usually an upward trend. The estimated daily intakes of antibiotics were on the levels of 0.001-1.0 μg/kg/day, mainly contributed by clarithromycin, ciprofloxacin and oxytetracycline, indicating a potential health risk based on the microbiological effect. A significantly positive correlation was found between DNA oxidative damage and exposure for four categories of antibiotics, conformed by both Spearman correlation and multiple linear regression analysis. The levels of 8-OHdG were 355 %, 239 %, 234 %, and 334 % higher with elevated levels of phenicols, macrolides, tetracyclines and sulfonamides from quartiles 2 to 4. Our results suggest that high-frequency consumption of takeaways may exacerbate oxidative stress trends through human exposure to antibiotics.

Validation of a quantitative liquid chromatography tandem mass spectrometry assay for linezolid in cerebrospinal fluid and its application to patients with HIV-associated TB-meningitis

Tuberculous meningitis treatment outcomes are poor and alternative regimens are under investigation. Reliable methods to measure drug concentrations in cerebrospinal fluid are required to evaluate distribution into the cerebrospinal fluid. A simple and quick method was developed and validated to analyse linezolid in human cerebrospinal fluid. Samples were prepared by protein precipitation followed by isocratic liquid chromatography and tandem mass spectrometry. The run time was 3.5 min. Accuracy and precision were assessed in three independent validation batches with a calibration range of 0.100-20.0 μg/mL. The method was used to analyse cerebrospinal fluid samples from patients with tuberculous meningitis enrolled in a clinical trial. Potentially infective patient samples could be decontaminated using Nanosep® nylon and Costar® nylon filter tubes under biosafety level 3 conditions before analysis. The filtration process did not significantly affect the quantification of linezolid. Linezolid concentration in cerebrospinal fluid obtained from tuberculous meningitis patients ranged from 0.197 μg/mL to 15.0 μg/mL. The ratio between average CSF and plasma linezolid concentrations varied with time, reaching a maximum of 0.9 at 6 h after dosing.

Microextraction of Tigecycline Using Deep Eutectic Solvents and Its Determination in Milk by LC-MS/MS Method

The occurrence of tigecycline (TGC), a new first glycylcycline antibiotic residues in food products harmfully influences potential human consumers health. Therefore, analysts are forced to develop new microextraction methods connected with modern extractants for effective isolation of this compound. For this purpose, deep eutectic solvents (DES) as the extraction media were used. Liquid-liquid microextraction (LLME) of tigecycline from milk samples with application of the hydrophobic deep eutectic solvents: decanoic acid:thymol (1:1), thymol:camphor (2:1), dodecanoic acid:menthol (2:1), and dodecanoic acid:dodecanol (1:1) was developed. The studied samples were subjected to a deproteinization process using trichloroacetic acid solution and acetonitrile. The optimal microextraction parameters, molar ratio of DES components, amount of extraction solvents, pH of milk sample, shaking, and centrifugation time, were chosen. Tigecycline in the obtained microextracts of deep eutectic solvents was analyzed using a liquid chromatographic technique connected with a tandem mass spectrometry (LC-MS/MS) system. The limits of detection and quantification values for TGC determination followed by DES-LLME-LC-MS/MS method were in the 1.8 × 10^-11 mol L^-1 (0.01 μg kg^-1) to 4.0 × 10^-9 mol L^-1 (2.28 μg kg^-1) and 5.5 × 10^-11 mol L^-1 (0.03 μg kg^-1) to 1.2 × 10^-8 mol L^-1 (6.84 μg kg^-1) ranges, respectively. The RSD values of precision were in the range 1.4-7.8% (intraday) and 5.4-11.7% (interday). The developed procedures were used for the determination of tigecycline in different bovine milk samples.

A method to determine two antibiotics prescribed to treat nosocomial infections in plasma and urine by micellar liquid chromatography

Combined prescription of the antimicrobial drugs linezolid and meropenem is a common strategy to treat multidrug-resistant nosocomial infections. We propose an innovative method to determine these two drugs in plasma and urine, based on micellar liquid chromatography. Both biological fluids were diluted in mobile phase, filtered and directly injected, without any extraction step. Using a C18 column and a mobile phase of 0.1 M sodium dodecyl sulfate - 10 % methanol, phosphate buffered at pH 3, running under isocratic mode, both antibiotics were eluted without overlapping in<15 min. Detection was by absorbance: 255 nm for linezolid and 310 nm for meropenem. The influence of sodium dodecyl sulfate and methanol concentration on retention factor was established for both drugs using an interpretative approach assisted by chemometrics. The procedure was successfully validated following the guidelines of 2018 Bioanalytical Method Validation Guidance for Industry in terms of: linearity (determination coefficients over 0.99990), calibration range (1 - 50 mg/L), instrumental and method sensitivity, trueness (bias of -10.8 to + 2.4%), precision (relative standard deviation of < 10.2%), dilution integrity, carry-over effect, robustness and stability. It should be emphasized that the method uses low volumes of toxic and volatile solvents and can be achieved in a short period. The procedure was found useful for routine analysis, as it was cost-affordable, more eco-friendly and safer than hydroorganic HPLC, easy-to-handle and highly sample-throughput. Finally, it was applied to incurred samples of patients taking this medication.

A short review of human exposure to antibiotics based on urinary biomonitoring

Antibiotics play a role in preventing and treating infectious diseases and also contribute to other health risks for humans. With the overuse of antibiotics, they are widely distributed in the environment. Long-term exposure to multiple antibiotics may occur in humans through medication and dietary intake. Therefore, it is critical to estimate daily intake and health risk of antibiotics based on urinary biomonitoring. This review compares the strengths and weaknesses of current analytical methods to determine antibiotics in urine samples, discusses the urinary concentration profiles and hazard quotients of individual antibiotics, and overviews correlations of antibiotic exposure with the risk of diseases. Liquid chromatography-tandem mass spectrometry is most applied to simultaneously determine multiple types of antibiotics at trace levels. Solid-phase extraction with a hydrophilic-lipophilic balance adsorbent is commonly used to extract antibiotics in urine samples. Fifteen major antibiotics with relatively higher detection frequencies and concentrations include sulfaclozine, trimethoprim, erythromycin, azithromycin, penicillin V, amoxicillin, oxytetracycline, chlortetracycline, tetracycline, doxycycline, ofloxacin, enrofloxacin, ciprofloxacin, norfloxacin, and florfenicol. Humans can be easily at microbiological effect-based risk induced by florfenicol, ciprofloxacin, azithromycin, and amoxicillin. Positive associations were observed between specific antibiotic exposure and obesity, allergic diseases, and mental disorders. Overall, the accessible, automated, and environmentally friendly methods are prospected for simultaneous determinations of antibiotics at trace level in urine. To estimate human exposure to antibiotics more accurately, knowledge gaps need to be filled up, including the transformation between parent and metabolic antibiotics, urinary excretion proportions of antibiotics at low-dose exposure and pharmacokinetic data of antibiotics in humans, and the repeated sampling over a long period in future research is needed. Longitudinal studies about antibiotic exposure and the risk of diseases in different developmental windows as well as in-depth research on the pathogenic mechanism of long-term, low-dose, and joint antibiotic exposure are warranted.

Evaluation of 4 quantification methods for monitoring 16 antibiotics and 1 beta-lactamase inhibitor in human serum by high-performance liquid chromatography with tandem mass spectrometry detection

Antibiotic (ATB) prescription in an intensive care unit (ICU) requires continuous monitoring of serum dosages due to the patient's pathophysiological condition. Dosing adjustment is necessary to achieve effective targeted concentrations. Since ICUs routinely use a large number of ATBs, global monitoring needs to be developed. In the present study, we developed a global analytical method for extracting, separating and quantifying the most widely used ATBs in ICUs: amoxicillin, piperacillin, cefazolin, cefepime, cefotaxime, ceftazidime, ceftolozane, ceftriaxone, ertapenem, meropenem, ciprofloxacin, moxifloxacin, levofloxacin, daptomycin, dalbavancin, linezolid and a beta-lactamase inhibitor: tazobactam. To guarantee the robustness of the quantification, we differentiated the 16 ATBs and the beta lactamase inhibitor into 4 pools (ATB1 to ATB4), taking into account prescription frequency in the ICU, the physicochemical properties and the calibration ranges of the ATBs selected. The whole ATB was then separated with two LC columns in reversed phase: Kinetex Polar-C18 100 Å and Polar-RP-80 synergy, in less than 6.5 min. Detection was carried out by electrospray in positive ion mode, by tandem mass spectrometry (LC-MS/MS. The four quantification methods were validated according to the European guidelines on bioanalytical method validation (EMEA guide), after determining the extraction yields, matrix effects, recovery, precision, accuracy, within-run precision and between-run precision. For all analyses, bias is < 15% and is comparable to the literature and LOQs vary from 0.05 mg.L^-1 for ciprofloxacin to 1.00 mg.L^-1 for ceftriaxone and dalbavancin. The stability time of cefepime and piperacillin is 3 hrs and for the other ATBs 6 hrs in serum at room temperature. For long-term stability, freezing at - 80 °C guarantees 3 months of stability for ceftriaxone and dalbavancin and more than 6 months for the other ATBs.

Monitoring of amoxicilline and ceftazidime in the microdialysate of diabetic foot and serum by capillary electrophoresis with contactless conductivity detection

Determination of the broad-spectrum antibiotics amoxicilline (AMX) and ceftazidime (CTZ) in blood serum and microdialysates of the subcutaneous tissue of the lower limbs is performed using CE with contactless conductivity detection (C⁴ D). Baseline separation of AMX is achieved in 0.5 M acetic acid as the background electrolyte and separation of CTZ in 3.2 M acetic acid with addition of 13% v/v methanol. The CE-C⁴ D determination is performed in a 25 µm capillary with suppression of the EOF using INST-coating on an effective length of 18 cm and the attained migration time is 4.2 min for AMX and 4.4 min for CTZ. The analysis was performed using 20 µl of serum and 15 µl of microdialysate, treated by the addition of acetonitrile in a ratio of 1/3 v/v and the sample is injected into the capillary using the large volume sample stacking technique. The LOQ attained in the microdialysate is 148 ng/ml for AMX and 339 ng/ml for CTZ, and in serum 143 ng/ml for AMX and 318 ng/ml for CTZ. The CE-C⁴ D method is employed for monitoring the passage of AMX and CTZ from the blood circulatory system into the subcutaneous tissue at the sites of diabetic ulceration in patients suffering from diabetic foot syndrome and also for measuring the pharmacokinetics following intravenous application of bolus antibiotic doses.

A novel sensitive analytical method for the simultaneous analysis of vancomycin and teicoplanin in human urine via single high-performance liquid chromatography coupled with photodiode array and mass spectrometry in series

Analysis of vancomycin and teicoplanin in biological fluids is vital since they are used in the treatment of hospital infections. For the determination of both glycopeptides in urine, a sensitive and accurate analytical method using high‐performance liquid chromatography coupled with photodiode array and mass spectrometry was developed and validated. This research work is the first attempt to develop a chromatographic method for the determination of two glycopeptides with structural similarities. Moreover, the used non‐invasive sampling method is an advantage of this research effort, especially when the blood sampling is difficult. Urine was treated with acetonitrile and 5% trichloroacetic acid, followed by solid‐phase extraction. The chromatographic separation was established at a C18 column (4.6 × 150 mm, 5 μm), using a gradient method and an electrospray ionization source in a positive mode. The linearity of the method was R²≥ 0.9900. The precision was estimated with a maximum coefficient of variation below 15%, while the accuracy ranged from 64 to 121%. The limit of detection and quantification of both glycopeptides ranged from 0.076 up to 0.33 mg/L and 0.33 up to 2.1 mg/L, respectively, showing the same sensitivity as the triple quadrupole mass spectrometry, which is the most frequently used method.

Methods for Determination of Meropenem Concentration in Biological Samples

Measuring the concentration of antibiotics in biological samples allow implementation of therapeutic monitoring of these drugs and contribute to the adjustment of the dosing regimen in patients. This increases the effectiveness of antimicrobial therapy, reduces the toxicity of these drugs and prevents the development of bacterial resistance. This review article summarizes current knowledge on methods for determining concentration of meropenem, an antibiotic drug from the group of carbapenems, in different biological samples. It provides a brief discussion of the chemical structure, physicochemical and pharmacokinetic properties of meropenem, different sample preparation techniques, use of apparatus and equipment, knowledge of the advantages and limitations of available methods, as well as directions in which new methods should be developed. This review should facilitate clinical laboratories to select and apply one of the established methods for measuring of meropenem, as well as to provide them with the necessary knowledge to develop new methods for quantification of meropenem in biological samples according to their needs.

Simultaneous Measurement of 11 Antibiotics for Use in the Intensive Care Unit by Ultra-High Performance Liquid Chromatography-Tandem Mass Spectrometry

BACKGROUND

Recent studies indicate that a high proportion of patients in the intensive care unit fail to attain adequate antibiotic levels. Thus, there is a need to monitor the antibiotic concentration to ensure effective treatment. In this article, the authors aimed to develop an ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method for the simultaneous quantification of antimicrobials to assess individualized therapeutic drug monitoring.

METHODS

A UHPLC-MS/MS method with 11 antibiotics (ciprofloxacin, moxifloxacin, benzylpenicillin, levofloxacin, linezolid, rifampicin, meropenem, cloxacillin, cefotaxime, clindamycin, and piperacillin) was developed. Chromatographic separation was performed using a Kinetex Biphenyl reversed-phase column, with gradient elution using 0.1% formic acid and methanol with 0.1% formic acid. Sample preparation was performed using methanol protein precipitation. The total run time was 5 minutes.

RESULTS

For all analytes, the interassay inaccuracies for calibrators were ≤5%. The interday inaccuracies for the quality controls (QCs) were ≤5% for all analytes. The interassay precision for calibration standards ranged between 1.42% and 6.11%. The interassay imprecision for QCs of all antibiotics and concentrations ranged between 3.60% and 16.1%. Interassay inaccuracy and imprecision for the QCs and calibration standards were ≤15% for all drugs, except benzylpenicillin.

CONCLUSIONS

A rapid UHPLC-MS/MS method was developed for the simultaneous quantification of 11 different antibiotics. Minimal sample preparation was required to ensure a rapid turnaround time. The method was applied to clinical samples collected from 4 intensive care units.

Development of an in-syringe gas-assisted density tunable solidification of floating organic droplet-based dispersive liquid phase microextraction method coupled with HPLC-MS/MS for monitoring amikacin in biological fluids

A new sample preparation method named in-syringe gas-assisted density tunable dispersive liquid phase microextraction based on solidification of floating organic droplet has been introduced. This method was coupled with high-performance liquid chromatography-tandem mass spectrometry and used for the extraction and quantification of amikacin in plasma and exhaled breath condensate (EBC) samples of the patients receiving amikacin. In the proposed approach, an inert gas is bubbled into a syringe barrel containing aqueous solution of the analyte and a mixture of low density extraction solvent and volatile density modifier. Consequently, the density modifier is evaporated and the analyte is migrated into the released extractant droplets. Basic parameters affecting efficiency of the developed method were optimized. Under optimum conditions, the method limits of detection were 0.06 and 0.29 ng/mL in EBC and plasma, respectively. The extraction recoveries were 90% and 87% in EBC and plasma, respectively. Also, the obtained relative standard deviations were below 9.5% and 9.8% for EBC and plasma, respectively. Considering these results, the developed method provides a quick and efficient way to determine amikacin in patients' biological fluids and can be used widely in drug monitoring and clinical studies.

Advanced treatment of effluent extended aeration process using biological aerated filter (BAF) with natural media: modification in media, design and backwashing process

Biological aerated filters (BAFs) have high filtration efficiency due to their tolerance of hydraulic and organic shocks are suitable for the treatment of complex and sanitary wastewater. In this study, for the first time, natural media of date kernel from Bam city was used as the BAF reactor media, with a meshing sand filter separated by a standard metal grid from the natural filter section used at the end of the reactor. This can be considered an innovation in the media and filtration. Aeration in the related reactor with 160 cm height was performed bilaterally as up-flow and continuously by nozzles throughout the reactor media. In this work, the actual effluent of the hospital wastewater treatment plant was employed as the inflow wastewater to the reactor, and its organic and inorganic parameters were measured before and after the treatment by the BAF reactor. The backwashing process was also studied in three ways: bottom backwashing (TB), top backwashing (BB), and top and bottom backwashing (TBBS), to determine the amount of water consumed and to achieve the desired result. According to the results obtained in this study, the removal efficiencies of inorganic and microbial contaminants, amoxicillin and azithromycin were obtained as follows: BOD₅: 98.48%, COD: 92.42%, \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$${\text{NO}}_{3}^{ - }$$\end{document}NO3-: 99.4%, P: 93.3%, Coliforms: 97%, Color: 42.8%, Turbidity: 95%, Sulphate: 30%, TSS: 98.9%, Amoxicillin: 20% and azithromycin: 13%. In the backwashing process, the amount of water consumed in these three TB, BB, and TBBS methods were obtained 300, 164, and 118 L, respectively, So, TBBS method was selected as the optimal method. Based on the results obtained in this study, it is concluded that the BAF process with natural date kernel has a high efficiency in removing organic and inorganic contaminants from hospital wastewater, also the concentration of most of the effluent parameters was less or in accordance with EPA standard.

Stability and Validation of a High-Throughput LC-MS/MS Method for the Quantification of Cefepime, Meropenem, and Piperacillin and Tazobactam in Serum

BACKGROUND

The class of antibiotics known as β-lactams are a commonly used due to their effectiveness and safety. Therapeutic drug monitoring has been proposed but requires an accurate assay along with well-characterized preanalytic stability, as β-lactams are known to be relatively unstable.

METHODS

A high-throughput LC-MS/MS assay validation and stability study was performed for cefepime, meropenem, and piperacillin and tazobactam in serum. Patient samples, standards, and QCs were crashed with acetonitrile containing internal standard. Following centrifugation, an aliquot of the supernatant was diluted with clinical laboratory reagent water and analyzed by LC-MS/MS.

RESULTS

The assay showed linearity between 0.5 and 60 µg/mL for each analyte. The intra- and interassay reproducibility at 3 different concentrations (approximately 2, 25, and 40 µg/mL) was <5% for each analyte. Accuracy studies for each analyte were compared using linear regression and demonstrated: slope = 1.0 ± 0.1; r2 ≥ 0.980; and y intercept 95% CI that included zero. Minimal ion suppression or enhancement was observed, and no significant carryover was observed up to 500 µg/mL of each analyte. Stability studies demonstrated significant loss in serum for each analyte at ambient and refrigerated temperatures (2-8 °C) and at -20 °C over days or weeks. In contrast, when stored at -80 °C, no significant loss was observed.

CONCLUSIONS

The LC-MS/MS assay showed acceptable performance characteristics for quantitation of β-lactams. With well-characterized stability, this assay can be used with residual specimens for pharmacokinetic modeling, which may lead to individualized dosing and improved patient care.

A new HPLC-MS/MS analytical method for quantification of tazobactam, piperacillin, and meropenem in human plasma

A simple and fast high-performance liquid chromatography with tandem mass spectrometry method for quantification of tazobactam, piperacillin, and meropenem in human plasma has been developed and validated. Simple sample preparation with a volume of 10 μL was done by protein precipitation with a mixture of methanol-acetonitrile-water (6:2:2, v/v/v). Chromatographic separation was achieved on a Luna column with a precolumn security guard by gradient elution using a mobile phase consisting of water with the addition of 0.1% formic acid (component A) and mixture methanol-acetonitrile (8:2, v/v) with the addition of 0.1% formic acid (component B). The run time was 2.7 min. The lower limits of detection and lower limits of quantification were for piperacillin 0.03 and 0.1 mg/L, for meropenem 0.04 and 0.2 mg/L and for tazobactam 0.16 and 0.5 mg/L. The validated method was used for therapeutic monitoring of tazobactam, piperacillin, and meropenem in samples of patients treated in the intensive care unit.

LC-MS/MS method for simultaneous quantification of dexamethasone and tobramycin in rabbit ocular biofluids

The complexity of Tobradex® ointment formulation (dexamethasone 0.1 wt% and tobramycin 0.3 wt%) and the high cost of pharmacokinetic (PK) studies in human aqueous humor may prevent generic drug companies from moving forward with a Tobradex®-equivalent product development. The in vitro drug release test would be an alternative approach for differentiating the generic formulations containing both dexamethasone (DEX) and tobramycin (TOB), and the results should be correlated with the in vivo ocular PK studies for further evaluation. To facilitate the in vivo ocular PK studies, a sensitive, rapid and specific liquid chromatography-tandem mass spectrometry (LC-MS/MS) method that can simultaneously quantify both DEX and TOB in rabbit ocular matrices including tear, aqueous humor and cornea was established and validated. The lower limit of quantification (LLOQ) was 1.5 ng/ml for DEX and 3 ng/ml for TOB with good precision and accuracy. Both intra- and inter-batch precisions were within ±15%, and the accuracy for all QCs was within the range of 85-115%. This new method was successfully applied for a pilot pharmacokinetic analysis of DEX and TOB in rabbit tears after topical administration of Tobradex® ointment.

Mass spectrometric identification and quantification of the antibiotic clavulanic acid in broiler chicken plasma and meat as a necessary analytical tool in finding ways to increase the effectiveness of currently used antibiotics in the treatment of broiler chickens

Clavulanic acid is a molecule with antimicrobial effect used in several livestock species treatment. Its inclusion in the treatment of infectious diseases of broilers requires determination of pharmacokinetic and pharmacodynamic parameters in order to determine the appropriate dosage for broilers and ensure safety of chicken products for human health. The present study describes the optimisation of analytical LC-MS/MS method for identification and quantification of clavulanic acid in broiler chicken plasma and meat. The limit of detection and the limit of quantification for the developed method were 3.09 μg·L⁻¹ and 10.21 μg·L⁻¹ for plasma and 2.57 μg·kg⁻¹ and 8.47 μg·kg⁻¹ for meat. The recoveries of the developed plasma and tissue extraction procedure were > 105.7% and > 95.6%, respectively. The achieved coefficient of variation of within-run precision ranged from 2.8 to 10.9% for plasma and from 6.5 to 8.5% for meat. The pharmacokinetic experiment was performed in 112 Ross broiler chickens assigned into time interval groups ranging from 10 min to 24 h in accredited animal facilities. Administered dose of clavulanic acid was 2.5 mg·kg⁻¹ according to the manufacturer’s recommendations. The pharmacokinetic parameters obtained from the experiment are as follows: C_max = 1.82 ± 0.91 mg·L⁻¹, T_max = 0.25 h, T_1/2 = 0.87 h, K_el = 0.80 ± 0.04 h⁻¹, AUC_0-∞ = 2.17 mg·h ·L⁻¹.

Development and validation of a simple and sensitive LC-MS/MS method for quantification of ampicillin and sulbactam in human plasma and its application to a clinical pharmacokinetic study

Ampicillin-sulbactam is a broad-spectrum combination antibiotic used for a variety of clinical applications, including as a prophylactic agent to reduce the risk of surgical site infection. The pharmacokinetics of ampicillin-sulbactam after redosing during prolonged surgeries remains incompletely understood. In anticipation of further studying the intra-operative pharmacokinetics of this drug, we have developed a novel liquid chromatography-tandem mass spectrometry (LC-MS/MS) method for the quantification of ampicillin and sulbactam. The plasma samples were prepared using a simple protein precipitation method. Gradient chromatographic elution was used to separate analytes, and MS/MS analysis was performed in negative ionization mode for both analytes via multiple reaction monitoring (MRM). All validation parameters were evaluated under a good laboratory practice (GLP) environment. For both ampicillin and sulbactam, the lower limit of quantitation (LLOQ) was established as 0.25 μg/mL. The calibration curve ranged from 0.25 to 200 μg/mL for ampicillin and 0.25-100 μg/mL for sulbactam. Inter- and intra-day precisions for both analytes were ≤11.5 % for quality controls and ≤17.4 % for LLOQ; accuracies ranged from -11.5 to 12.5% for 3 quality control levels and -18.1-18.7% for LLOQ. In addition to sensitivity, accuracy and precision, 13 other parameters were also validated for both analytes, and the results met the acceptance criteria. Our method was successfully applied to quantify ampicillin and sulbactam concentrations in patients undergoing surgery.

Personalized antibiotic therapy – a rapid high performance liquid chromatography–tandem mass spectrometry method for the quantitation of eight antibiotics and voriconazole for patients in the intensive care unit

Objectives

For a long time, the therapeutic drug monitoring of anti-infectives (ATDM) was recommended only to avoid the toxic side effects of overdosing. During the last decade, however, this attitude has undergone a significant change. Insufficient antibiotic therapy may promote the occurrence of drug resistance; therefore, the “one-dose-fits-all” principle can no longer be classified as up to date. Patients in intensive care units (ICU), in particular, can benefit from individualized antibiotic therapies.

Methods

Presented here is a rapid and sufficient LC-MS/MS based assay for the analysis of eight antibiotics (ampicillin, cefepime, cefotaxime, ceftazidime, cefuroxime, linezolid, meropenem, and piperacillin) applicated by continuous infusion and voriconazole. In addition a dose adjustment procedure for individualized antibiotic therapy has been established.

Results

The suggested dose adjustments following the initial dosing of 121 patient samples from ICUs, were evaluated over a period of three months. Only a minor percentage of the serum levels were found to be within the target range while overdosing was often observed for β-lactam antibiotics, and linezolid tended to be often underused. The results demonstrate an appreciable potential for β-lactam savings while enabling optimal therapy.

Conclusions

The presented monitoring method provides high specificity and is very robust against various interferences. A fast and straightforward method, the developed routine ensures rapid turnaround time. Its application has been well received by participating ICUs and has led to an expanding number of hospital wards participating in ATDM.

LC-MS/MS method for nine different antibiotics

BACKGROUND AND AIMS

TDM of antibiotics can bring benefits to patients and healthcare systems by providing better treatment and saving healthcare resources. We aimed to develop a multi-analyte method for several diverse antibiotics using LC-MS/MS.

MATERIALS AND METHODS

Sample preparation consisted of protein precipitation with methanol, dilution and online extraction using a Turboflow Cyclone column. Separation was performed on a Synergi 4 µm Max RP column and deuterated forms of three antibiotics were used as internal standards.

RESULTS

We present a LC-MS/MS method for the quantitative determination of nine antibiotics, including five cephalosporins, the carbapenem ertapenem, the fluoroquinolone ciprofloxacin as well as the combination drug trimethoprim-sulfamethoxazole from plasma. Additionally, unbound ertapenem and cefazolin were analyzed in plasma water after ultrafiltration using plasma calibrators. Results from routine TDM show the applicability of the method.

CONCLUSION

The presented method is precise and accurate and was introduced in a university hospital, permitting fast TDM of all nine analytes. It was also used in a clinical study for measuring cefazolin free and total concentrations.

Simultaneous determination of six antibiotics in human serum by high-performance liquid chromatography with UV detection

Antibiotics are widely used in intensive care patients to treat severe infections. To avoid bacterial resistance or toxic side effects, the determination of serum concentration of ABs is advisable. Therefore, in this study, we developed and validated a simple and fast high-performance liquid chromatography method with UV detection for the simultaneous determination of four β-lactam ABs (meropenem, imipenem, ceftazidime, and piperacillin) and two coadministered substances (cilastatin and tazobactam) in human serum. Sample preparation required a simple protein precipitation by methanol. The separation of the ABs occurred within a timeframe of 17 min. For this purpose, we used a Kinetex F5 column with a linear gradient of acetonitrile and phosphate buffer (pH 6.9). The UV detector recorded two separate chromatograms at 220 and 295 nm simultaneously. Validation has demonstrated that the method is linear, accurate, and precise within the clinically relevant range for each substance.

Simultaneous determination of 8 beta-lactams and linezolid by an ultra-performance liquid chromatography method with UV detection and cross-validation with a commercial immunoassay for the quantification of linezolid

Linezolid and beta-lactams are anti-infective drugs frequently used in intensive care unit patients. Critical illness could induce alterations of pharmacokinetic parameters due to changes in the distribution, the metabolism and the elimination process. Therapeutic drug monitoring (TDM) is therefore recommended to prevent mainly under-dosing of beta-lactams or hematological and neurological toxicities of linezolid. In Multi-or Extensively-Drugs Resistant-Tuberculosis Bacteria, the regimen could include linezolid with meropenem and amoxicillin/clavulanate justifying the development of a method allowing their simultaneous quantification. The aim of this work was to develop an in-house ultra-performance liquid chromatography method with UV detection (UHPLC-PDA) allowing the simultaneous determination of 8 beta-lactams (amoxicillin, aztreonam, cefepime, ceftazidime, ceftriaxone, cefuroxime, meropenem and piperacillin) and linezolid and to cross-validate the linezolid quantification with a new commercial immunoassay (ARK kit) tested on a Cobas analyzer. The main advantages of the immunoassay are a 24/24 h random access assay which is fully automated and results provided within 2 h. The interference due to potential co-administrated drugs was evaluated on both methods. The preanalytical factors (type of matrix, stability) for linezolid were also investigated. The influence of hemolysis, icteria or lipemia on the spectroscopic detection of the immunoassay was assessed. The analytical performances were evaluated using the accuracy profiles approach with acceptance limits fixed at ±30%. Seventy patient samples were measured using both methods. No cross-reaction with the tested anti-infective drugs as well as no influence of hemolysis, lipemia, icteria were observed. The linezolid concentration could be measured on heparinized plasma or serum without a significant difference and remained stable for at least 72h at 4°C.The UHPLC-PDA method performed well in the analytical range investigated (0.25-50 mg/L for meropenem, 0.75-50 mg/L for linezolid and 1-200 mg/L for other beta-lactams) with an intermediate precision and a relative bias below 7.6 and 7.7%, respectively. The analytical range of the immunoassay was narrower, from 0.85 to 18.5 mg/L. The precision and relative bias were lower than 8.1% and 4.2%, respectively. Results obtained on clinical samples showed an acceptable difference between methods with a mean bias of -1.8% [95% confidence interval: -5.2% - 1.6%]. To conclude, both methods showed acceptable performance to perform TDM of linezolid considering the therapeutic through target of 2-8 mg/L. The choice of the method should be made according to the degree of emergency of the response required and the field of application justifying or not the simultaneous quantification of beta-lactams and linezolid.

Copper nanoparticles for SERS-based determination of some cephalosporin antibiotics in spiked human urine

Copper nanoparticles (CuNPs) were prepared through a wet chemistry method to be used as substituents for noble-metal-based materials in the determination of cephalosporin antibiotics in urine using surface-enhanced Raman spectroscopy (SERS). The synthesis of the CuNPs was optimized to maximize the analytical signal, and microwave heating was used to increase the reaction rate and improve the homogeneity of the CuNPs. Ceftriaxone (CTR), cefazolin (CZL), and cefoperazone (CPR) were used as the analytes of interest. The determination tests were performed on artificially spiked samples of real human urine with concentrations corresponding to therapeutic drug monitoring (TDM) (50-500 μg mL^-1). Urine samples collected in the morning and during the day were used to account for deviations in the urine composition, and the universality of the proposed protocol was ensured by performing sample dilution as a pretreatment. The use of calibration plots in the form of Freundlich adsorption isotherms yielded linear calibration plots. All limits of detection were lower than the minimal concentrations required for TDM, equaling 7.5 (CTR), 8.8 (CZL), and 36 (CPR) μg mL^-1. Comparison of CuNPs with Ag and Au nanoparticles (AgNPs and AuNPs, respectively) confirmed that CuNPs offered a competitively high Raman enhancement efficiency (for excitation at 638 nm). Further, although the CuNPs demonstrated poorer temporal stability as compared with the AgNPs and AuNPs, the use of freshly prepared CuNPs resulted in satisfactory accuracy (recovery = 93-107%). Given the short analysis time (<20 min, including the time for the synthesis of the CuNPs and the SERS measurements using a portable Raman spectrometer), low sensitivity to the presence of the primary intrinsic urine components and satisfactory figures of merit of the proposed protocol for the determination of cephalosporin antibiotics in urine, it should be suitable for use in TDM.

Ceftriaxone pharmacokinetics by a sensitive and simple LC-MS/MS method: Development and application

Ceftriaxone is a third-generation cephalosporin, worldwide use as a first-line treatment for several infections, including life-threatening infections as meningitis or endocarditis. Nowadays, ceftriaxone use is changing, embracing high-dose schemes, new populations treated and requirement of dose individualization and optimization. These reasons warranted the development of new sensitive assays. This study aimed to develop and validate a fast and handy bioanalytical method for the quantification of ceftriaxone in human plasma covering a broad range of concentrations. The analysis was performed using high-performance liquid chromatography coupled to tandem mass spectrometry. Sample preparation was based on protein precipitation with acetonitrile followed by centrifugation. Chromatography separation was performed on Phenomenex Luna C18 column (5 μm, 150 × 2.0 mm) and a mobile phase consisting of 70 % of mobile phase A (10 mM of ammonium acetate and 1% formic acid in purified water) and 30 % mobile phase B (0.1 % formic acid in acetonitrile) at a flow rate of 500 μl/min on an isocratic program. Both the analyte and the internal standard were quantified using the positive electrospray ionization (ESI) mode within a single runtime of 5.00 min. The method was validated following the U.S. Food and Drug Administration guidelines over the concentration range of 3-1000 μg/mL. The within-run and between-run precision and accuracy were <15 %, and therefore met the standard regulatory acceptance criterion. In conclusion, a sensitive and robust LC-MS/MS method was developed for a fast quantitation of ceftriaxone concentrations in plasma samples with multiples applications in research and clinical therapeutic drug monitoring.

A Status Update on Pharmaceutical Analytical Methods of Aminoglycoside Antibiotic: Amikacin

Amikacin (AMK) is one of the commonly used aminoglycoside antibiotics, introduced for clinical use in patients suffering from bacterial infections especially life-threatening gram-negative infections. Due to lack of chromophore in the molecule, the detection of AMK during analysis is a challenge. Thus, pre and post-column derivatization techniques are generally used for AMK estimation. This review focuses on different analytical methods used for detection and quantification of AMK in pure or fixed dose combination pharmaceutical formulations and biological samples. Various reported methods described in the literature include high-performance liquid chromatography techniques, pulsed electrochemical detection techniques, Chemiluminescence techniques, Capillary electrophoresis and immunological methods. High-performance-liquid-chromatography based methods with UV/Vis spectrophotometric, fluorescence and mass spectrometric detection are the most prevailing methods employed for the analysis of AMK. This review could be of significant importance in the area of future AMK analytical method development studies.

Ultra-performance liquid chromatography-tandem mass spectrometric method for quantitation of the recently Food and Drug Administration approved combination of vaborbactam and meropenem in human plasma

A parenteral medical combination containing vaborbactam and meropenem is used mainly to treat complicated urinary tract infections. A novel ultra-performance liquid chromatography tandem mass spectrometric method was developed for the sensitive determination of both compounds in human plasma. Sample preparation was performed by precipitation technique. The chromatographic separation was accomplished using the Acquity C18-BEH column, 0.01 M ammonium formate: acetonitrile (47 : 53, v/v) as a mobile phase with a flow rate of 0.2 ml min-1. Analytes were monitored by applying multiple reaction monitoring. The bioanalytical validation criteria were conducted following the Food and Drug Administration recommendations. The method was linear within range 0.5 to 50 µg ml-1, for both drugs. The intra-day and inter-day precision, as coefficient variation (% CV) and the accuracy, as % bias did not exceed 15% for both drugs. The percentage recovery of targeted analytes was not less than 77%, calculated at three quality control levels. The proposed method showed a suitable lower level of quantification value of 0.50 µg ml-1 for both analytes, which is far lower than the expected C max, which permits the use of this method for pharmacokinetic studies. The proposed method proved to be useful for the evaluation of this combination in both human plasma and pharmaceutical formulation.

Validation and clinical application of a multiplex high performance liquid chromatography - tandem mass spectrometry assay for the monitoring of plasma concentrations of 12 antibiotics in patients with severe bacterial infections

OBJECTIVE

Unpredictable pharmacokinetics of antibiotics in patients with life-threatening bacterial infections is associated with drug under- or overdosing. Therapeutic drug monitoring (TDM) may guide dosing adjustment aimed at maximizing antibacterial efficacy and minimizing toxicity. Rapid and accurate analytical methods are key for real-time TDM. Our objective was to develop a robust high-performance liquid chromatography-tandem mass spectrometry method (HPLC-MS/MS) for multiplex quantification of plasma concentrations of 12 antibiotics: imipenem/cilastatin, meropenem, ertapenem, cefepime, ceftazidime, ceftriaxone, piperacillin/tazobactam, amoxicillin, flucloxacillin, rifampicin, daptomycin.

METHODS

A single extraction procedure consisting in methanol plasma protein precipitation and H₂O dilution was used for all analytes. After chromatographic separation on an Acquity UPLC HSS-T3 2.1 × 50 mm, 1.8 µm (Waters®) column, quantification was performed by electro-spray ionisation-triple quadrupole mass spectrometry with selected reaction monitoring detection. Antibiotics were divided in two pools of calibration according to the frequency of analyses requests in the hospital routine antibiotic TDM program. Stable isotopically-labelled analogues were used as internal standards. A single analytical run lasted less than 9 min.

RESULTS

The method was validated based on FDA recommendations, including assessment of extraction yield (96-113.8%), matrix effects, and analytical recovery (86.3-99.6%). The method was sensitive (lower limits of quantification 0.02-0.5 µg/mL), accurate (intra/inter-assay bias -11.3 to +12.7%) and precise (intra/inter-assay CVs 2.1-11.5%) over the clinically relevant plasma concentration ranges (upper limits of quantification 20-160 µg/mL). The application of the TDM assay was illustrated with clinical cases that highlight the impact on patients' management of an analytical assay providing information with short turn-around time on antibiotic plasma concentration.

CONCLUSION

This simple, robust high-throughput multiplex HPLC-MS/MS assay for simultaneous quantification of plasma concentrations of 12 daily used antibiotics is optimally suited for clinically efficient real-time TDM.

Determination of carbapenems in water samples by UHPLC-MS/MS

A rapid and reliable method for the detection of five carbapenems (biapenem, imipenem, doripenem, meropenem, and faropenem) in water was developed and validated. After acidification of water samples with acetic acid, carbapenems were isolated using a Bond Elut PPL cartridge. The target compounds were separated using ultra high performance liquid chromatography with a chromatographic run time of 5 min and detected on a triple quadrupole mass spectrometer operated in positive electrospray ionization and multiple reaction monitoring mode. Mean recoveries were in the range of 76.6-106.5%, with satisfactory intraday and interday relative standard deviations lower than 10.0 and 10.8%, respectively. The limits of detection and quantification were in the ranges of 0.05-0.2 µg/L and 0.1-0.5 µg/L, respectively, depending on the analyte. The proposed method was applied to the analysis of river samples and wastewater samples from swine farms, and no carbapenems were detected in the collected samples.

Spectral signal processing approaches for selective quantification of the recently FDA approved brand-new combination of Vaborbactam and Meropenem; for conformity assessment of bulk and batch release

Vaborbactam (VBR) and Meropenem (MRP) is a recently approved combination for treatment of complicated urinary tract infection (cUTI). Three different signal processing approaches utilizing UV spectral data has been applied for quality assessment of Vabromere® injection. First, the simplest signal processing method, dual wavelength (DW) was developed, where VBR and MRP were determined at (234.0 & 291.0 nm) and (219.5 & 245.5 nm), respectively. The second one utilized signal processing through derivatization, where, each drug was determined without any interference. This was achieved at 250.0 & 318.0 nm for VBR and MRP, respectively. The third approach is the recently developed algorithm, pure component contribution (PCCA), which efficiently extracts the pure spectrum of each drug and therefore determination is achieved at their λ_max with maximum sensitivity and lowest error. The applied methods were found to be linear in the concentration range of 5.00-100.00 μg/mL and 5.00-150.00 μg/mL, for VBR and MRP, respectively. Minimum solvent consumption and diminished preparation or extraction steps are achieved associated with accurate quantitation of VBR and MRP in bulk powders and injection. The developed methods were successfully compared to a reported HPLC method, where no significant difference was found regarding both accuracy and precision.

Electrochemical immunosensor based on carboxylated single-walled carbon nanotube-chitosan functional layer for the detection of cephalexin

In this study, a sensitive and selective electrochemical immunosensor for cephalexin (CEX) determination on a glassy carbon electrode (GCE) surface was modified by a carboxylated single-walled carbon nanotubes/chitosan (SWNTs-COOH/CS) composite. The SWNTs-COOH/CS composite was used to enhance sensor performance and to enlarge the electrochemical response of CEX. The cephalosporin-ovalbumin coupling (CEX-OVA) was synthesized using the reactive ester method. The free CEX in solution could be effectively measured based on the competitive immunoreaction between CEX-antibody and CEX. Under optimal conditions, the electrochemical immunosensor offered an excellent response for CEX. The linear range was 1-800 ng/ml, with a detection limit of 45.7 ng/ml (S/N = 3). This method was applied to determine CEX in six different samples and obtained the recovery range from 80.15% to 94.04%. These results indicated that the fabricated electrochemical immunosensor and sensing method are suitable for quantification of CEX in real samples. These have great potential for wider applications in environmental and agri-food products industries.

A 2D HPLC-MS/MS method for several antibiotics in blood plasma, plasma water, and diverse tissue samples

An analytical method using 2D high-performance liquid chromatography followed by tandem mass spectrometry for the quantification of the beta-lactam antibiotics amoxicillin, flucloxacillin, piperacillin, benzylpenicillin, the beta-lactamase inhibitors clavulanic acid, and tazobactam, as well as the macrolide antibiotic clindamycin, is presented. All analytes were measured in human plasma, while amoxicillin, clavulanic acid, flucloxacillin, and clindamycin were also analyzed in human tissue samples. Because of its high-protein binding, additionally, the free fraction of flucloxacillin was measured after ultrafiltration. As internal standards, deuterated forms of the beta-lactams were used. Sample preparation for all matrices was protein precipitation followed by online extraction on a TurboFlow MAX column, while sample separation was performed on an Accucore XL C18 column. Calibration curves were linear over 0.2-25 mg/kg for the tissue samples and 0.05-20 mg/l for the free fraction of flucloxacillin. In plasma, the calibration curves for amoxicillin and piperacillin were linear over 3.125-125 mg/l, for clavulanic acid and tazobactam over 1-40 mg/l, for benzylpenicillin 0.25-40 mg/l, and for flucloxacillin and clindamycin over 1.5-60 mg/l and 0.05-8 mg/l respectively. In plasma and plasma ultrafiltrate, inaccuracy and imprecision for any analyte were always less than 15%. In tissue, the accuracy and precision varied up to 16%, respectively, 20%, when various tissues were analyzed using a calibration in water. Graphical abstract.

Antibiotic body burden of elderly Chinese population and health risk assessment: A human biomonitoring-based study

Recently, the widespread use of antibiotic has raised concerns about the potential health risks associated with their microbiological effect. In the present study, we investigated 990 elderly individuals (age ≥ 60 years) from the Cohort of Elderly Health and Environment Controllable Factors in West Anhui, China. A total of 45 representative antibiotics and two antibiotic metabolites were monitored in urine samples through liquid chromatography electrospray tandem mass spectrometry. The results revealed that 34 antibiotics were detected in 93.0% of all urine samples and the detection frequencies of each antibiotic varied between 0.2% and 35.5%. The overall detection frequencies of seven human antibiotics (HAs), 10 veterinary antibiotics (VAs), three antibiotics preferred as HAs (PHAs), and 14 preferred as VAs (PVAs) in urines were 27.4%, 62.9%, 30.9% and 72.7%, respectively. Notably, the samples with concentrations of six PVAs (sulfamethoxazole, trimethoprim, oxytetracycline, danofloxacin, norfloxacin and lincomycin) above 5000 ng/mL accounted for 1.7% of all urine samples. Additionally, in 62.7% of urine samples, the total antibiotic concentration was in the range of the limits of detection to 20.0 ng/mL. Furthermore, the elderly individuals with the sum of estimated daily intakes of VAs and PVAs more than 1 μg/kg/day accounted for 15.2% of all participants, and a health risk related to change in gut microbiota under antibiotic stimulation was expected in 6.7% of the elderly individuals. Especially, ciprofloxacin was the foremost contributor to the health risk, and its hazard quotient value was more than one in 3.5% of all subjects. Taken together, the elderly Chinese people were extensively exposed to VAs, and some elderly individuals may have a health risk associated with dysbiosis of the gut microbiota.

Investigation of early antibiotic use in pediatric patients with acute respiratory infections by high-performance liquid chromatography

In this study, we developed and validated two reliable high-performance liquid chromatography (HPLC) methods for the qualitative detection of six oral β-lactams, which are commonly used in pediatric patients with acute respiratory infections (ARIs). Two distinct reverse-phase chromatographic separations of six β-lactams were obtained. Four β-lactams (cefadroxil, cephalexin, cefaclor and cefixime) in urine were separated using a gradient program with a mobile phase consisting of K₂ HPO₄ buffer (20 mm, pH 2.8) and acetonitrile on a LichroCART 250 × 4.6 mm, Purospher STAR C₁₈ end-capped (5 μm) column. Two remained β-lactams (amoxicillin and cefuroxime) were analyzed using a gradient elution with the mobile phase containing K₂ HPO₄ buffer (20 mm, pH 3.0) and acetonitrile on a LichroCart^® Purospher Star C₈ end-capped column (5 μm, 125 × 4.6 mm). Good linearity within the range of 0.3-30 μg/ml for cefadroxil, cephalexin, cefaclor and cefixime, and 0.2-20 μg/ml for amoxicillin and cefuroxime, was attained. The precisions were <14%. The accuracies ranged from 85.87 to 102.8%. The two validated methods were then applied to determine these six antibiotics in 553 urine samples of pediatric patients with ARIs. As a result, 32.2% were positive with one or more of six tested β-lactams. Cefixime was the most commonly detected agent, accounting for 9.8% of enrolled patients.

Simultaneous determination of eight β-lactam antibiotics in human plasma and cerebrospinal fluid by liquid chromatography coupled to tandem mass spectrometry

Therapeutic drug monitoring of β-lactam antibiotics is increasingly used for dose optimization in the individual patient to increase efficacy and reduce the risk of toxicity. The objective of this work is to develop and validate a fast and reliable method using liquid chromatography coupled to tandem mass spectrometric detection to quantify simultaneously amoxicillin, cloxacillin, cefazolin, cefotaxime, ceftazidime, cefepime, meropenem and piperacillin in plasma and cerebrospinal fluid (CSF). Sample clean-up included protein precipitation with acetonitrile followed by evaporation of the supernatant and reconstitution of the residue with mobile phase solvents. Eight deuterated β-lactam antibiotics were used as internal standards. Chromatographic separation was performed on a C18 column (50 mm x 2.1 mm) using a binary gradient elution of water and acetonitrile both containing 0.1% (v/v) formic acid. The total run time was 8 min. The method was then used to perform therapeutic drug monitoring on 2221 patient plasma samples. 32 CSF samples were also analyzed. This method, with its simple sample preparation provides sensitive, accurate and precise quantification of the plasma and cerebrospinal fluid concentration of β-lactam antibiotics and can be used for therapeutic drug monitoring.