Development, optimization and validation of a highly sensitive UPLC–ESI-MS/MS method for simultaneous quantification of amlodipine, benazeprile and benazeprilat in human plasma: Application to a bioequivalence study

State-of-the-art mathematically induced filtration approaches for smart spectrophotometric assessment of silodosin and solifenacin mixture in their new challenging formulation: Multi-tool greenness and whiteness evaluation

Benign prostatic hyperplasia is one of the most predominant health disorders in men with increasing incidence by age and usually accompanied with other bothersome symptoms. A new fixed dose combination, containing Silodosin and Solifenacin, has been recently launched for relieving such disorder associated with overactive bladder syndrome. In the current work, three smart, innovative and white spectrophotometric methods have been newly developed and optimized for simultaneous determination of the studied drugs in their binary mixture using water as an eco-friendly solvent. The adopted strategy relied on calculation of one or two factors as numerical constant or spectrum allowing mathematical filtration of desired analyte and full removal of any overlapped components in the mixture. The developed methods are categorized over two spectrophotometric platform windows. Window I deals with absorption spectra in its native forms (zero-order) including a newly developed method termed induced concentration subtraction (ICS) as well as induced dual wavelength (IDW) methods. Whereas window III is concerned with ratio spectra as in induced amplitude modulation (IAM) method. Compared to classical spectrophotometric methods, the proposed ones are superior in overcoming the inherited challenges in zero-order absorption spectrum of Solifenacin, particularly its very low absorptivity and lack of unique absorption maximum. Validity of the methods were thoroughly assured as per ICH guidelines with unified regression over 3.0-50.0 µg/mL in ICS method while IDW and IAM ones possessed linearity ranges of 3.0-50.0 µg/mL of Silodosin and 5.0-60.0 µg/mL of Solifenacin. The work was also extended to verify content uniformity of dosage units in accordance with USP recommendations. Greenness profile of the proposed methods was clearly assessed, in comparison to the reported analysis ones, via state-of-the-art software metrics, namely, green solvent selection tool (GSST), complementary green analytical procedure index (ComplexGAPI) and analytical greenness (AGREE). Finally, the proposed methods were in good adherence to the recently published postulates of white analytical chemistry.

A Novel Spectrofluorimetric Determination of Antazoline and Xylometazoline in their Ophthalmic Formulation; Green Approach and Evaluation

A green developed spectrofluorimetric method has been applied for Antazoline (ANT) and Xylometazoline (XLO) determination in both pharmaceutical formulation and pure form. The developed method is synchronous spectrofluorimetry coupled with the second derivative mathematical tool for the determination of antazoline and xylometazoline in their dosage form. The developed method depends on reacting the cited drugs with dansyl chloride, a suitable derivatizing agent, to generate highly fluorescent derivatives. The products formed were measured at emission wavelengths; 703.0 and 712.0 nm after being excited at wavelengths; 350.0 and 355.0 nm for antazoline and xylometazoline, respectively. Synchronous spectrofluorimetry coupled with second derivative mathematical tool was developed and optimized using fluorescence data manager software generating second derivative peak amplitudes at 556.5 nm for antazoline and 598.0 nm for xylometazoline. Linear responses have been represented over a wide range of concentration 0.5-12.0 µg/mL for antazoline and 0.1-10.0 µg/mL for xylometazoline, correspondingly. Method validation was successfully applied. Additionally, statistical comparison of developed method with official ones has been carried out where no significant difference was found. Evaluation of the method's greenness was proven using several assessment tools. Indeed, the method developed is found to be precise, sensitive, and discriminating to assess the cited drugs for regular analysis.

Supported liquid extraction combined with liquid chromatography tandem mass spectrometry for the quantitative analysis of a TLR7 agonist imiquimod LFX453 in plasma at low picograms per milliliter: Method validation and its application to a pharmacokinetic study in minipig

Sample preparation is essential for low-level compound determination. In the present work, supported liquid extraction (SLE) was used as sample preparation for the low-level determination of a new TLR7 agonist imiquimod compound, LFX453. Samples were extracted on ISOLUTE® SLE 96-well plates using tert-butyl-methyl ether followed by evaporation and dry residue reconstitution with 150 μl of a mixture of 0.1% formic acid in acetonitrile-water (50/50, v/v). Samples were eluted using a flow rate of 0.750 ml/min on a C18 column (50 × 2.1 mm, 2.7 μm) with a mobile phase consisting of 0.1% formic acid in water (A) and 0.1% formic acid in acetonitrile (B). Tandem mass spectrometry was used to analyze the samples in positive mode. The method run time was 6.5 min, and the low limit of quantification was 1.00 pg/ml with 0.100 ml of minipig plasma. Intra-run and inter-run precision and accuracy were within the acceptance criteria at four concentration levels over a concentration ranging from 1.00 to 200 pg/ml. There was no matrix effect and recovery, three freeze-thaw cycles and incurred samples reanalysis were validated. The method was successfully applied for measuring LFX453 in minipig plasma after application on minipig skin.

Exquisite integration of quality-by-design and green analytical approaches for simultaneous determination of xylometazoline and antazoline in eye drops and rabbit aqueous humor, application to stability study

This work implements a stability indicating HPLC method developed to simultaneously determine xylometazoline (XYLO) and antazoline (ANT) in their binary mixture, rabbit aqueous humor and cited drug's degradates by applying analytical quality-by-design (AQbD) combined with green analytical chemistry (GAC) experiment for the first time. This integration was designed to maximize efficiency and minimize environmental impacts, as well as energy and solvent consumption. Analytical quality-by-design was applied to achieve our aim starting with evaluation of quality risk and scouting analysis, tracked via five parameters chromatographic screening using Placket-Burman design namely: pH, temperature, organic solvent percentage, flow rate, and wavelength detection. Recognizing the critical method parameters was done followed by optimization employing central composite design and Derringer's desirability toward assess optimum conditions that attained best resolution with satisfactory peak symmetry with short run time. Optimal chromatographic separation was attained by means of an XBridge® C18 (4.6 × 250 mm, 5 µm) column through isocratic elution using a mobile phase consists of phosphate buffer (pH 3.0): ethanol (60:40, by volume) at a 1.6 mL/min flow rate and 230.0 nm UV detection. Linearity acquired over a concentration range of 1.0-100.0 µg/mL and 0.5-100.0 µg/mL for XYLO and ANT, respectively. Furthermore, imperiling cited drugs' stock solutions to stress various conditions and satisfactory peaks of degradation products were obtained indicating that cited drugs are vulnerable to oxidative degradation and basic hydrolysis. Degradates' structures were elucidated using mass spectrometry. Applying various assessment tools; namely: analytical greenness (AGREE), green analytical procedure index (GAPI), analytical eco-scale, and national environmental method index (NEMI), Greenness method's evaluation was applied and proved to be green. In fact, the developed method is established to be perceptive, accurate, and selective to assess cited drugs for routine analysis.

Development, Validation, and Two-Year Application of Rapid and Simple LC-MS/MS-Based Method for the Determination of K2MK-7 in Blood Samples

Biological properties of menaquinone-7, one of the vitamin K2 vitamers (K2MK-7), both those proven and those that remain to be investigated, arouse extensive interest that goes beyond the strictly scientific framework. The most important of them is the prevention of age-related diseases, considering that we live in the times identified as the era of aging societies and many people are exposed to the vitamin K2MK-7 deficiency. Therefore, an effective analytical protocol that can be adopted as a diagnostic and preventive analytics tool is needed. Herein, a simple sample preparation method followed by the liquid chromatography-tandem mass spectrometry-based method (LC-MS/MS), was used for the selective and sensitive determination of K2MK-7 in serum samples. Under the optimized conditions, using 500 µL of serum and the same amount of n-hexane, the reproducibility and the accuracy were obtained in the ranges of 89-97% and 86-110%, respectively, and the limit of detection value was 0.01 ng/mL. This method was used for the routine analysis. Statistical interpretation of the data from 518 samples obtained during 2 years of practice allowed for obtaining information on the content and distribution of K2MK-7 in the Polish population, broken down by the sex and age groups.

Development and validation of LC-MS/MS methods for the quantification of 101BHG-D01, a novel, long-acting and selective muscarinic receptor antagonist, and its main metabolite M6 in human plasma, urine and feces: Application to a clinical study in healthy Chinese subjects

101BHG-D01 is a novel, long-acting and selective muscarinic receptor antagonist for the treatment of chronic obstructive pulmonary disease (COPD) and rhinorrhea in rhinitis. To support its clinical study, several liquid chromatography tandem mass spectrometry (LC-MS/MS) methods for the quantification of 101BHG-D01 and its main metabolite M6 in human plasma, urine and feces were developed. The plasma samples were prepared by protein precipitation, and the urine and fecal homogenate samples were pretreated by direct dilution, respectively. The chromatographic separation was performed on an Agilent InfinityLab Poroshell 120 C18 column with 0.1% formic acid and 10.0 mM ammonium acetate buffer solution in water and methanol as the mobile phase. The MS/MS analysis was performed by using multiple reaction monitoring (MRM) under a positive ion electrospray ionization mode. The methods were validated with regards to selectivity, linearity, lower limit of quantitation (LLOQ), accuracy and precision, matrix effect, extraction recovery, dilution integrity, batch size, carryover and stability. The calibration ranges were as follows: 1.00-800 pg/mL for 101BHG-D01 and 1.00-20.0 pg/mL for M6 in plasma; 0.0500-20.0 ng/mL for 101BHG-D01 and M6 in urine; 0.400-400 ng/mL for 101BHG-D01 and 0.100-100 ng/mL for M6 in feces. There was no endogenous or cross interference observed at the retention time of the analytes and internal standard in various biological matrices. Across these matrices, for the lower limit of quantitation quality control (LLOQ QC) samples, the intra- and inter-batch coefficients of variation were within 15.7%. For other QC samples, the intra- and inter-batch coefficients of variation were within 8.9%. The intra- and inter-batch accuracy deviations for all QC samples were within the range of - 6.2-12.0%. No significant matrix effect was observed from the matrices. The extraction recoveries of these methods at different concentrations were consistent and reproducible. The analytes were stable in different matrices under various storage conditions. The other bioanalytical parameters were also fully validated and met the criteria given in the FDA guidance. These methods were successfully applied to a clinical study in healthy Chinese subjects after a single dose administration of 101BHG-D01 inhalation aerosol. After inhalation, 101BHG-D01 was absorbed into plasma rapidly with the time to reach the maximum drug concentration (T_max) of 5 min and eliminated slowly with a half-life time about 30 h. The cumulative urinary and fecal excretion rates revealed 101BHG-D01 was mainly excreted in feces, rather than urine. The pharmacokinetic results of the study drug laid a foundation for its further clinical development.

A novel method to estimate the absorption rate constant for two-compartment model fitted drugs without intravenous pharmacokinetic data

The in vivo performances of most drugs after extravascular administration are fitted well with the two-compartment pharmacokinetic (PK) model, but the estimation of absorption rate constant (k_a) for these drugs becomes difficult during unavailability of intravenous PK data. Herein, we developed a novel method, called the direct method, for estimating the k_a values of drugs without using intravenous PK data, by proposing a new PK parameter, namely, maximum apparent rate constant of disposition (k_max). The accuracy of the direct method in k_a estimation was determined using the setting parameters (k₁₂, k₂₁, and k₁₀ values at high, medium, and low levels, respectively) and clinical data. The results showed that the absolute relative error of k_a estimated using the direct method was significantly lower than that obtained using both the Loo-Riegelman method and the statistical moment method for the setting parameters. Human PK studies of telmisartan, candesartan cilexetil, and tenofovir disoproxil fumarate indicated that the k_a values of these drugs were accurately estimated using the direct method based on good correlations between the k_a values and other PK parameters that reflected the absorption properties of drugs in vivo (T_max, C_max, and C_max/AUC_0-t). This novel method can be applied in situations where intravenous PK data cannot be obtained and is expected to provide valuable support for PK evaluation and in vitro-in vivo correlation establishment.

Spectrophotometric platform windows' exploitation for the green determination of Alcaftadine in presence of its oxidative degradation product

This study presents the determination of Alcaftadine (ALF) in its oxidative degradation product presence by applying comprehensive study comparative of four different green stability indicating spectrophotometric approaches through successful exploitation of different spectrophotometric platform windows. Window I; based on absorption spectrum zero order data manipulation using the newly developed extended absorbance difference (EAD). Window II; based on derivative spectra by second order derivative (D²) data manipulation. Window III; based on ratio spectra applying constant multiplication (CM) and absorptivity centering via factorized ratio difference spectrum (ACT-FSR_ΔP) methods data manipulation. Finally, window IV; based on derivative of ratio spectrum by virtue of first derivative of ratio spectral (DD¹) method data manipulation. Calibration curves construction were over linearity range; 1.0-14.0 µg/mL for ALF. The proposed methods accuracy, precision, and linearity range were determined and validated as per ICH guidelines. Moreover, they were able to analyze ALF in raw form, dosage form and in existence of its oxidative degradation product. Statistical comparisons were done between the proposed methods and the reported one showing no significant difference concerning accuracy and precision. Furthermore, greenness profile assessment was accomplished by means of four metric tools; namely: analytical greenness (AGREE), green analytical procedure index (GAPI), analytical eco-scale, and national environmental method index (NEMI).

A validated LC-MS/MS method for determination of antiviral prodrug molnupiravir in human plasma and its application for a pharmacokinetic modeling study in healthy Egyptian volunteers

A fully validated, simple, rapid and reproducible liquid chromatography-tandem mass spectrometry method was developed to determine NHC (N-hydroxycytidine), the active metabolite of Molnupiravir (MOL) in human plasma; one of the limited treatment options for SARS-CoV-2 in plasma of healthy volunteers. The internal standard (IS) used was ribavirin. The extraction of analyte and IS from plasma was performed using acetonitrile as a solvent for protein precipitation. Agilent Zorbax Eclipse plus C₁₈, 4.6 × 150 mm, (5 µm) was used for chromatographic separation using a mixture of methanol0.2 % acetic acid (5:95, v/v) as a mobile phase that was pumped at a flow rate of 0.9 mL/min. Detection was performed on a triple quadrupole mass spectrometer operating in multiple reaction monitoring (MRM) employing positive ESI interface using API4500 triple quadrupole tandem mass spectrometer system, with the transitions set at m/z 260.10 → 128.10 and 245.10 → 113.20 for NHC and IS respectively. Method validation was performed in accordance with United States FDA bioanalytical guidance. The concentration range of 20.0-10000.0 ng/mL was used to establish linearity via weighted linear regression approach (1/x²). Moreover, the analyzed pharmacokinetic data from twelve Egyptian healthy volunteers were used to develop a population pharmacokinetic model for NHC. The developed model was used to perform simulations and evaluate the current MOL dosing recommendations through calculating the maximum concentration (C_max) "the safety metric" and area under the curve (AUC_0-12 h) "the efficacy metric" for 1000 virtual subjects. Geometric mean ratios (GMR) with their associated 90% confidence intervals (CI) compared to literature values were computed. Geometric means of simulation-based Cmax and AUC0-12 were 3827 ng/mL (GMR = 1.05; 90% CI = 0.96-1.15) and 9320 ng.h/mL (GMR = 1.04; 90% CI = 0.97-1.11), respectively indicating that current MOL dosage can achieve the therapeutic targets and dose adjustment may not be required for the Egyptian population. The developed model could be used in the future to refine MOL dosage once further therapeutic targets are identified.

An LC-MS/MS Method for Determination of Triple Drugs Combination of Valsartan, Amlodipine and Hydrochlorothiazide in Human Plasma for Bioequivalence Study

Background:

Current guidelines for the treatment of hypertension recommend combination therapy, which intends to control blood pressure and enhance cardiovascular protection.

Materials and Methods:

A sensitive, reliable and selective tandem mass spectrometry (LC-MS/MS) method has been developed for simultaneous quantification of amlodipine (AML), valsartan (VAL) and hydrochlorothiazide (HCTZ) in human plasma. The chromatographic system was equipped with ACE 5 C8 (50 X 2.1 mm) column and utilized a mobile phase composition of 0.5 mM Ammonium Chloride & 0.04% FA-Methanol (45:55% v/v). The method used three internal standards; AML-D4, HCTZ-D2 C13 and VAL-D3 with 10% intra- and inter-day precision, and 6% bias for all the analytes.

Results:

The assay was found to be linear with R-2 > 0.998, and the limits of quantification for AML, VAL and HCTZ were 0.2, 50.0 and 2.0 ng/mL, respectively. The analytes were found to be stable in plasma samples over short and long term storage.

:

The developed method is rapid with a run time of 3.5 min and cost-effective since the simple sample preparation method is adopted. This method was successfully applied for the bioequivalence study of AML, VAL, and HCTZ in human plasma after administration of the fixed-dose combination tablet of (10/160/25 mg). Pharmacokinetic parameters (Cmax and AUC0-72) for AML and (Cmax, AUC0-t, AUC0-∞) for VAL and HCTZ were used for bioequivalence assessment. These were determined by noncompartmental analysis of concentration data.

Conclusion:

The result showed 90% confidence intervals (obtained by ANOVA) which were within the predefined ranges. As a consequence, this method can be successfully applied for measuring and quantifying a large number of samples.

Ultra-high performance liquid chromatography-MS/MS (UHPLC-MS/MS) in practice: analysis of drugs and pharmaceutical formulations

Background

UHPLC-MS/MS is connected in various research facilities for the qualitative and quantitative investigation of a pharmaceutical substance, pharmaceutical items, and biological specimen.

Main body

The commence review article is an endeavor to offer pervasive awareness around assorted aspects and details about the UHPLC-MS/MS and related techniques with the aim on practice to an estimation of medicinal active agents in the last 10 years. The article also focused on isolation, separation, and characterization of present impurity in drug and biological samples.

Conclusion

Review article compiles a general overview of medicinally important drugs and their analysis with UHPLC-MS/MS. It gives fundamental thought regarding applications of UHPLC-MS/MS for the study on safety limit. The summary of developed UHPLC-MS/MS methods gives a contribution to the future trend and limitations in this area of research.

Application of an LC-MS/MS method for the analysis of amlodipine, valsartan and hydrochlorothiazide in polypill for a bioequivalence study

A sensitive and selective method has been proposed for the simultaneous determination of amlodipine (AML), valsartan (VAL) and hydrochlorothiazide (HCTZ) in human plasma by liquid chromatography–tandem mass spectrometry (LC–MS/MS). The analytes and their deuterated analogs were quantitatively extracted from 100 µL human plasma by solid phase extraction on Oasis HLB cartridges. The chromatographic separation of the analytes was achieved on a Chromolith RP_18e (100 mm × 4.6 mm) analytical column within 2.5 min. The resolution factor between AML and VAL, AML and HCTZ, and VAL and HCTZ was 2.9, 1.5 and 1.4, respectively, under isocratic conditions. The method was validated over a dynamic concentration range of 0.02–20.0 ng/mL for AML, 5.00–10,000 ng/mL for VAL and 0.20–200 ng/mL for HCTZ. Ion-suppression/enhancement effects were investigated by post-column infusion technique. The mean IS-normalized matrix factors for AML, VAL and HCTZ were 0.992, 0.994 and 0.998, respectively. The intra-batch and inter-batch precision (% CV) across quality control levels was ≤ 5.56% and the recovery was in the range of 93.4%–99.6% for all the analytes. The method was successfully applied to a bioequivalence study of 5 mg AML + 160 mg VAL + 12.5 mg HCTZ tablet formulation (test and reference) in 18 healthy Indian males under fasting. The mean log-transformed ratios of C_max, AUC_0–120h and AUC_0-inf and their 90% CIs were within 90.2%–102.1%. The assay reproducibility was demonstrated by reanalysis of 90 incurred samples.

Effects of orally administered antibiotics on the bioavailability of amlodipine: gut microbiota-mediated drug interaction

BACKGROUND

Amlodipine is a representative calcium channel blocker that is frequently prescribed for the treatment of hypertension. In this study, the possibility of drug-drug interactions between amlodipine and coadministered antibiotics (ampicillin) was investigated in rats; thus, changes in the metabolic activities of gut microflora and the consequent pharmacokinetic pattern of amlodipine following ampicillin treatment were characterized.

METHODS AND RESULTS

In human and rat fecalase incubation samples, amlodipine was metabolized to yield a major pyridine metabolite. The remaining amlodipine decreased and the formation of pyridine metabolite increased with incubation time, indicating the involvement of gut microbiota in the metabolism of amlodipine. Pharmacokinetic analyses showed that systemic exposure of amlodipine was significantly elevated in antibiotic-treated rats compared with controls.

CONCLUSION

These results showed that antibiotic intake might increase the bioavailability of amlodipine by suppressing gut microbial metabolic activities, which could be followed by changes in therapeutic potency. Therefore, coadministration of amlodipine with antibiotics requires caution and clinical monitoring.

Quantification of sofosbuvir and ledipasvir in human plasma by UPLC-MS/MS method: Application to fasting and fed bioequivalence studies

A rapid and sensitive LC-MS/MS method was developed, optimized and validated for quantification of sofosbuvir (SF) and ledipasvir (LD) in human plasma using eplerenone as an internal standard (IS). Analytes and IS were extracted from plasma by simple liquid-liquid extraction technique using methyl tertiary butyl ether. The prepared samples were chromatographed on Acquity UPLC BEH C18 column. Separation was done using a mobile phase formed of 0.1% formic acid and acetonitrile (50:50, v/v) in an isocratic mode at a flow rate of 0.4ml/min. The Xevo TQD LC-MS/MS was operated under the multiple-reaction monitoring mode using electrospray ionization. A full validation of the method was performed according to the FDA guidelines. Linearity was found to be in the range of 0.25-3500ng/ml for SF and 5-2000ng/ml for LD. The intra-day and inter-day precision and accuracy results were within the acceptable limits. A short run time of 2min allows analysis of more than 400 plasma samples per day. The developed method was successfully applied to both fasting and fed bioequivalence studies in healthy human volunteers.

Development and validation of sensitive and rapid UPLC-MS/MS method for quantitative determination of daclatasvir in human plasma: Application to a bioequivalence study

A rapid and sensitive UPLC-MS/MS method was developed and validated for determination of daclatasvir (DAC) in human plasma using sofosbuvir (SOF) as an internal standard (IS). The Xevo TQD LC-MS/MS was operated under the multiple-reaction monitoring mode using electrospray ionization. Precipitation with acetonitrile was used in sample preparation. The prepared samples were chromatographed on Acquity UPLC HSS C18 (50×2.1mm, 1.8μm) column by pumping 10mM ammonium formate (pH 3.5) and acetonitrile in an isocratic mode at a flow rate of 0.30ml/min. Method validation was performed as per the FDA guidelines and the standard curves were found to be linear in the range of 5-4000ng/ml for DAC. The intra-day and inter-day precision and accuracy results were within the acceptable limits. A very short run time of 1.2min made it possible to analyze more than 500 human plasma samples per day. The wider range of quantification of DAC allowed the applicability of the developed method for its determination in a bioequivalence study in human volunteers.

Novel and sensitive UPLC-MS/MS method for quantification of sofosbuvir in human plasma: application to a bioequivalence study

A novel and sensitive LC-MS/MS method was developed and validated for determination of sofosbuvir (SF) using eplerenone as an internal standard. The Xevo TQD LC-MS/MS was operated under the multiple-reaction monitoring mode using electrospray ionization. Extraction with tert-butyl methyl ether was used in sample preparation. The prepared samples were chromatographed on Acquity UPLC BEH C18 (50 × 2.1 mm, 1.7 μm) column by pumping 0.1% formic acid and acetonitrile in an isocratic mode at a flow rate of 0.35 mL/min. Method validation was performed as per the US Food and Drug Administration guidelines and the standard curves were found to be linear in the range of 0.25-3500 ng/mL for SF. The intra- and inter-day precision and accuracy results were within the acceptable limits. A very short run time of 1 min made it possible to analyze more than 500 human plasma samples per day. A very low quantification limit of SF allowed the applicability of the developed method for determination of SF in a bioequivalence study in human volunteers. Copyright © 2016 John Wiley & Sons, Ltd.

Development of a new benazepril hydrochloride chewable tablet and evaluation of its bioequivalence for treatment of heart failure in dogs

The aim of the study was to develop a new chewable benazepril hydrochloride(BH) tablet, investigate its physical properties, and evaluate its bioequivalence with the branded formulation (Fortekor). A corrective agent was included in the formula to improve its palatability and convenience for administration to dogs. The tablet remained stable in light, heat, and humidity tests, and its physical properties such as hardness, uniformity of content, and dissolution rate were highly consistent with the technical standards. After single and repeated administrations to eight beagles and single dose to 14 mongrel dogs (0.5 mg/kg p.o.), plasma BH and its active metabolite, benazeprilat (BZ), were detected. There was no significant difference in the major pharmacokinetic parameters (Cmax , Tmax, and AUC₀₋₂₄) between the two formulations. The 90% confidence intervals calculated for the ratios of area under the time-concentration curve (AUC₀₋₂₄) were 92.4-116.3% for BH and 89.9-102.3% for BZ, within the accepted range for bioequivalence of 80-125%. The results showed our new chewable tablet is bioequivalent to the commercial product and suitable for addition to the benazepril product family for the treatment of heart failure in dogs.

Simultaneous determination of telmisartan and amlodipine in dog plasma by LC-MS-MS

A simple, rapid and sensitive method was established for the simultaneous determination of telmisartan and amlodipine in dog plasma by a HPLC-MS-MS analysis. The plasma sample preparation was a simple deproteinization by the addition of three volumes of methanol/acetonitrile mixture followed by centrifugation. The analytes and internal standard diphenhydramine were separated on a Zorbax SB-C18 column with a mobile phase of acetonitrile : water (45 : 55, v/v) at a flow rate of 0.2 mL/min with an operating temperature of 25°C. Detection was carried out by electrospray ionization in positive-ion multiple reaction monitoring mode. The calibration plots in dog plasma were linear over the ranges of 0.5-2,000 ng/mL for telmisartan and 0.5-500 ng/mL for amlodipine. The lower limit of quantification was 0.5 ng/mL for two analytes. The intra- and interday precisions (RSD%) were within 9.0%. The average recoveries of analytes were >85.0%. The method was successfully applied to the pharmacokinetic study of the two compounds after oral administration of telmisartan-amlodipine combination preparation to dogs.

Development of a sensitive UPLC-ESI-MS/MS method for quantification of sofosbuvir and its metabolite, GS-331007, in human plasma: Application to a bioequivalence study

A rapid and simple LC-MS/MS method was developed and validated for the simultaneous estimation of sofosbuvir (SF) and its metabolite GS-331007 (GS) using famotidine as an internal standard (IS). The Xevo TQD LC-MS/MS was operated under the multiple-reaction monitoring mode using electrospray ionization. Extraction with ethyl acetate was used in sample preparation. The prepared samples were chromatographed on Acquity UPLC HSS C₁₈ (50 mm × 2.1 mm, 1.8 μm) column by pumping 0.1% formic acid and acetonitrile (50:50, v/v) in an isocratic mode at a flow rate of 0.3 ml/min. Method validation was performed as per the FDA guidelines and the standard curves were found to be linear in the range of 10-2500 ng/ml for both SF and its metabolite. The intra-day and inter-day precision and accuracy results were within the acceptable limits. A very short run time of 1.2 min made it possible to analyze more than 300 human plasma samples per day. The developed assay method was successfully applied to a bioequivalence study in human volunteers.