Simultaneous determination of domperidone and Itopride in pharmaceuticals and human plasma using RP-HPLC/UV detection: Method development, validation and application of the method in in-vivo evaluation of fast dispersible tablets

RP-HPLC-Based Bioanalytical Approach for Simultaneous Quantitation of Cinnarizine and Domperidone in Rat Plasma

An accurate, precise and sensitive reverse-phase high-performance liquid chromatography (RP-HPLC) bioanalytical approach was developed for the simultaneous estimation of cinnarizine (CIN) and domperidone (DOM) in rat plasma using irbesartan (IRB) as an internal standard (IS). The proposed RP-HPLC approach was validated as per the latest ICH M10 guidelines. The analytes (CIN and DOM) and IS were extracted from plasma samples using the protein precipitation strategy. Chromatographic separation is accomplished by a C18 SunfireTM (5 µm, 250 mm × 4.6 mm) analytical column, using an isocratic mobile phase consisting of acetonitrile-methanol in 30:70 proportions at a flow rate of 1 mL/min. The detection of all three constituents was recorded at a wavelength of 270 nm with a UV detector. DOM, CIN and IS were eluted at 3.2, 4.5 and 6.1 min, respectively, utilizing a total run time of 10 min. The lower limit of quantification (LLOQ) was 5 ng/mL for CIN and DOM in rat plasma. The proposed RP-HPLC approach was linear in the 5–200 ng/mL range for CIN and DOM. The recovery of the method was greater than 95%, and the relative uncertainty was less than 2%, indicating that the proposed bioanalytical approach was accurate and precise. The limit of detection was established as 1.1 ng/mL for CIN and 1.7 ng/mL for DOM. The created approach was found to be robust and passed all validation criteria; thus, the proposed RP-HPLC approach can be employed successfully for the simultaneous assessment of CIN and DOM in rat plasma.

Formulation of Chitosan-Coated Piperine NLCs: Optimization, In Vitro Characterization, and In Vivo Preclinical Assessment

In the present research work, surface-modified nanostructured lipid carriers (NLCs) with chitosan (CH) were prepared to improve the therapeutic efficacy of piperine (PP). NLCs were developed and optimized (CH-PP-NLCs-opt) by design expert software and the selected NLCs surface was coated with chitosan (0.2% w/v). CH-PP-NLCs-opt have shown a particle size of 149.34 ± 4.54 nm and entrapment efficiency of 80.65 ± 1.23%. The results of the solid-state characterization study exhibited that PP enclosed in lipids and present amorphous form. It might be due to the nanoparticle size of NLCs. The drug release study revealed PP-NLCs-opt and CH-PP-NLCs-opt exhibited significant (P < 0.05) difference in PP release (88.87 ± 5.23% and 76.34 ± 4.54%) as compared to pure PP (19.02 ± 2.87%). CH-PP-NLCs-opt exhibited strong bioadhesion than PP-NLCs-opt which has a positive influence the drug permeation and absorption. CH-PP-NLCs-opt showed higher permeation (1083.34 ± 34.15 μg/ cm2) than pure PP (106.65 ± 15.44 μg/cm²) and PP-NLCs-opt (732.45 ± 28.56 μg/ cm²). The significantly enhanced bioavailability of PP was observed from CH-PP-NLCs-opt (3.76- and 1.21-fold) than PP-dispersion and PP-NLCs-opt. The diabetes was induced in rats by a single intraperitoneal administration of streptozotocin (STZ, 40 mg/kg, citrate buffer pH 4.5), and results revealed that PP-NLCs-opt and CH-PP-NLCs-opt reduce the blood glucose level (28.26% and 36.52% respectively) as compared to PP-dispersion (10.87%). It also helps to maintain the altered biochemical parameters. In conclusion, CH-PP-NLC can be a novel oral nanocarrier for the management of diabetes.

Voltammetric determination of itopride using carbon paste electrode modified with Gd doped TiO2 nanotubes

In the present work TiO₂ nanotubes (TNT) have been synthesized by alkaline hydrothermal transformation. Then they have been doped with Gd element. Characterizations of doped and undoped TNT have been done with TEM and SEM. The chemical composition was analyzed by EDX, Raman and FTIR spectroscopy. The crystal structure was characterized by XRD. Carbon paste electrode has been fabricated and mixed with Gd doped and undoped TNT to form a nanocomposite working electrode. Comparison of bare carbon paste electrode and Gd doped and undoped TNT carbon paste electrode for 1.0 ×10^-3 M K₄ [Fe(CN)₆] voltammetric analysis; it was observed that Gd doped TNT modified electrode has advantage of high sensitivity. Gd doped TNT modified electrode has been used as working electrode for itopride assay in a pharmaceutical formulation. Cyclic voltammetry analysis showed high correlation coefficient of 0.9973 for itopride (0.04-0.2 mg/mL) with a limit of detection (LOD) and limit of quantitation values (LOQ) of 2.9 and 23.0 μg.mL^-1 respectively.

Box-Behnken Assisted Validation and Optimization of an RP-HPLC Method for Simultaneous Determination of Domperidone and Lansoprazole

A highly specific, accurate, and simple RP-HPLC technique was developed for the real-time quantification of domperidone (DOMP) and lansoprazole (LANS) in commercial formulations. Chromatographic studies were performed using a Luna C8(2), 5 μm, 100Å, column (250 × 4.6 mm, Phenomenex) with a mobile phase composed of acetonitrile/2 mM ammonium acetate (51:49 v/v), pH 6.7. The flow rate was 1 mL·min−1 with UV detection at 289 nm. Linearity was observed within the range of 4–36 µg·mL−1 for domperidone and 2–18 µg·mL−1 for lansoprazole. Method optimization was achieved using Box-Behnken design software, in which three key variables were examined, namely, the flow rate (A), the composition of the mobile phase (B), and the pH (C). The retention time (Y1 and Y3) and the peak area (Y2 and Y4) were taken as the response parameters. We observed that slight alterations in the mobile phase and the flow rate influenced the outcome, whereas the pH exerted no effect. Method validation featured various ICH parameters including linearity, limit of detection (LOD), accuracy, precision, ruggedness, robustness, stability, and system suitability. This method is potentially useful for the analysis of commercial formulations and laboratory preparations.

Development and validation of high-performance liquid chromatography method for the simultaneous monitoring of pantoprazole sodium sesquihydrate and domperidone maleate in plasma and its application to pharmacokinetic study

A sensitive, inexpensive high-performance liquid chromatography–ultraviolet detection (HPLC–UV) method has been developed and validated for the simultaneous monitoring of pantoprazole sodium sesquihydrate (PSS) and domperidone maleate (DM) in rabbit plasma on a C18 column with UV detection at 285 nm. Box–Behnken design was used with 3 independent variables, namely, flow rate (X1), mobile phase composition (X2), and phosphate buffer pH (X3), which were used to design mathematical models. Response surface design was applied to optimize the dependent variables, i.e., retention time (Y1 and Y2) and percentage recoveries (Y3 and Y4) of PSS and DM. The method was sensitive and reproducible over 1.562 to 25 μg/mL. The effect of the quadratic outcome of flow rate, mobile phase composition, and buffer pH on retention time (p ˂ 0.001) and percentage recoveries of PSS and DM (p = 0.0016) were significant. The regression values obtained from analytical curve of PSS and DM were 0.999 and 0.9994, respectively. The percentage recoveries of PSS and DM were ranged from 94.5 to 100.41% and 94.77 to 100.31%, respectively. The developed method was applied for studying the pharmacokinetics of PSS and DM. The Cmax of test and reference formulations were 48.06 ± 0.347 μg/mL and 46.31 ± 0.398 μg/mL for PSS, and 15.11 ± 1.608 μg/mL and 12.06 ± 1.234 μg/mL for DM, respectively.

Use of Patient Health Records to Quantify Drug-Related Pro-arrhythmic Risk

There is an increasing expectation that computational approaches may supplement existing human decision-making. Frontloading of models for cardiac safety prediction is no exception to this trend, and ongoing regulatory initiatives propose use of high-throughput in vitro data combined with computational models for calculating proarrhythmic risk. Evaluation of these models requires robust assessment of the outcomes. Using FDA Adverse Event Reporting System reports and electronic healthcare claims data from the Truven-MarketScan US claims database, we quantify the incidence rate of arrhythmia in patients and how this changes depending on patient characteristics. First, we propose that such datasets are a complementary resource for determining relative drug risk and assessing the performance of cardiac safety models for regulatory use. Second, the results suggest important determinants for appropriate stratification of patients and evaluation of additional drug risk in prescribing and clinical support algorithms and for precision health.

In vitro data and computational models can assist with calculating pro-arrhythmic risk

We use patient health records and FDA Adverse Event Reporting System reports

Use of such datasets helps assess relative drug risk and cardiac safety models

We quantify how patient characteristics can affect arrhythmia incidence

Voltammetric Method Development for Itopride Assay in a Pharmaceutical Formulation

Background:

Itopride used for the gastrointestinal symptoms caused by reduced gastrointestinal mobility. For the first time rapid, low cost and green voltammetric method has been applied to analyze itopride in pharmaceutical formulation.

Method:

Cyclic Voltammetry (CV), Linear Sweep Voltammetry (LSV), Square Wave Voltammetry (SWV) and Differential Pulse Voltammetry (DPV) methods have been applied in this study.

Results:

Na2SO4 (1M) supporting electrolyte exhibited sharper anodic peak current than other used supporting electrolytes; glassy carbon electrode (GC) working electrode shows better results than platinum electrode (Pt). SWV results show the lowest limit of detection and quantitation values of 2.3 and 18.1 μg.mL-1, respectively. SWV recovery is 100.56% and 100.46% for 50 μg.mL-1 and 100 μg.mL-1 of commercially available itopride tablets, respectively. Furthermore, SWV inter and intraday results precessions are better than other used methods with 0.96 and 0.56% RSD, respectively.

Conclusion:

The optimum method of applied methods in this study is SWV method. Voltammetry showed low LOD and LOQ values with high accuracy and precession in addition to comparable repeatability and reproducibility values.

In vitro and in vivo characterization of domperidone-loaded fast dissolving buccal films

The delivery of drugs via fast dissolving films is an effective alternative for drugs with low bioavailability when administered by other routes. This is the case of domperidone (DMP) an anti-emetic drug with low water solubility and vulnerable to extensive first-pass effect. To overcome these limitations, in this work, we designed and produced fast dissolving muco-adhesive buccal films of domperidone using varying amount polyvinylpyrrolidone (PVP K-90) using the solvent casting method. Films loaded with more than 10% of drug were not homogenous and opaque as indicated by white patches of drug in the film matrix. Formulation of DMP in the film form resulted in conversion of the drug from crystalline state to the semi-crystalline state as indicated by X-ray powder diffraction analysis. Moreover, about 40% of drug loaded within the films was released during the first five minutes compared to only about only 6.5% of pure drug in drug dissolution assays in vitro. In vivo pharmacokinetics analysis revealed that the DMP-loaded film had higher maximum plasma concentration (C_max) and shorter time to reach C_max (T_max) than a commercially available tablet formulation. In conclusion, the produced DMP buccal film formulation showed high absorption rate, rapid onset of action, and improved bioavailability compared with the conventional tablet. Our findings may support the development of novel dosage forms for the transmucosal delivery of DMP for convenient, rapid, and effective treatment of nausea and vomiting.

Bioanalytical methods for the detection of antidiabetic drugs: a review

Type 2 diabetes mellitus, a disease which prevalence has been progressively increasing worldwide, is characterized by chronic hyperglycemia resulting from the combination of inappropriate insulin secretion and/or resistance to insulin action. If left uncontrolled, diabetes is associated with complications such as dysfunction and failure of various organs, and even premature death. Along with lifestyle-modification strategies, several classes of oral antidiabetic agents can be employed for glycemic control. Thus, therapeutic drug monitoring of these drugs is essential to maintain appropriate treatment. This review discusses the most frequently employed analytical techniques and sample preparation systems to obtain a reliable and trustworthy method to quantify antidiabetic drugs in biological matrices. An adequate choice of internal standard, ideal chromatography conditions and most suitable analytical detector are reported.

Clinical drugs for reflux esophagitis

Reflux esophagitis (RE) is a common clinical disease with complex etiology and high incidence which is increasing year by year. Although conventional treatments can ease patients' symptoms, the long-term prognosis is unsatisfactory with many adverse reactions and recurrent symptoms. This article discusses the physiological functions, therapeutic effects and combined application of clinical drugs for reflux esophagitis, with an aim to provide guidance for the treatment of this disease.