SPME as a promising tool in translational medicine and drug discovery: From bench to bedside

A critical review of bioanalytical and clinical applications of solid phase microextraction

Studying the functions, mechanisms, and effects of drugs and other exogenous compounds on biological systems, together with investigations performed to understand biosystems better, comprises one of the most fascinating areas of research. Although classical sample preparation techniques are dominantly used to infer the relevant information from the investigated system, they fail to meet various imperative requirements, such as being environmentally friendly, applicable in-vivo, and compatible with online analysis. As a chameleon in the analytical toolbox, solid phase microextraction (SPME) is one of the best tools available for studying biological systems in unconventional ways. In this review, SPME is spotlighted, and its capability for bioanalytical applications, including drug analysis, untargeted and targeted metabolomics, in-vivo and clinical studies, is scrutinized based on studies reported in the past five years. In addition, novel extractive phases and instrumental coupling strategies developed to serve bioanalytical research are discussed to give the perspective for state-of-the-art and future developments. The literature assessment showed that SPME could act as a critical tool to investigate in-vivo biological systems and provide information about the elusive portion of the metabolome. Moreover, recently introduced miniaturized SPME probes further improved the low-invasive nature of the sampling and enabled sampling even from a single cell. The coupling of SPME directly to mass spectrometry significantly reduced the total analytical workflow and became one of the promising tools suitable for fast diagnostic purposes and drug analysis. The numerous applications and advancements reported in bioanalysis using SPME show that it will continue to be an indispensable technique in the future.

Solid-phase microextraction - a future technique in pharmacology and coating trends

Traditional sample preparation techniques based on liquid-liquid extraction (LLE) or solid-phase extraction (SPE) often suffer from a major error due to the matrix effects caused by significant co-extraction of matrix components. The implementation of a modern extraction technique such as solid-phase microextraction (SPME) was aimed at reducing analysis time and the use of organic solvents, as well as eliminating pre-analytical and analytical errors. Solid-phase microextraction (SPME) is an innovative technique for extracting low molecular weight compounds (less than 1500 Da) from highly complex matrices, including biological matrices. It has a wide range of applications in various types of analysis including pharmaceutical, clinical, metabolomics and proteomics. SPME has a number of advantages over other extraction techniques. Among the most important are low environmental impact, the ability to sample and preconcentrate analytes in one step, simple automation, and the ability to extract multiple analytes simultaneously. It is expected to become, in the future, another method for cell cycle research. Numerous available literature sources prove that solid-phase microextraction can be a future technique in many scientific fields, including pharmaceutical sciences. This paper provides a literature review of trends in SPME coatings and pharmacological applications.

Hierarchical covalent organic framework hollow nanofibers-bonded stainless steel fiber for efficient solid phase microextraction

The solid phase microextraction (SPME) technique has been widely applied in the detection of trace compounds in food, environment, and medicine due to its advantages of easy quantification, simple operation, and greenness. Herein, a templating strategy with SiO2 nanofibers (SiO2 NFs) is reported to synthesize hierarchical covalent organic framework hollow nanofibers (COF HNFs)-coated stainless steel fiber for SPME application with dramatically enhanced enrichment performance for trace analytes. The construction of hierarchical porosity inside the microextraction coatings can not only increase the specific surface area of COF extraction materials for obtaining more abundant adsorption sites but also greatly improve the accessibility of internal COF micropores. Moreover, the thicknesses of the microextraction COF coatings can be facilely tailored by adjusting the amount of SiO2 NFs pre-assembled on the SPME fibers. On the headspace solid phase microextraction (HS-SPME) of antimicrobial residues, the developed COF TpBD-Me2 HNFs-12 fibers achieve enrichment factors of 2026 and 1823 for thymol and carvacrol respectively, which are significantly higher than those obtained from the counterpart COF TpBD-Me2-bonded fiber (8.5-8.2 times) and commercial CAR/PDMS fiber (3.3-4.4 times). Furthermore, the developed method was demonstrated to have wide linearity (0.1-50 μg L-1), low limits of detection (0.010 μg L-1), good thermal stability and excellent reusability (>60 recycles), demonstrating great application potential in the extraction of trace organic pollutants. The strategy developed in this work is applicable to preparing a variety of topological COF (e.g., TpBD, TpPa-1) HNFs-bonded fibers.

Development of a GC/Q-ToF-MS Method Coupled with Headspace Solid-Phase Microextraction to Evaluate the In Vitro Metabolism of β-Caryophyllene

Sample preparation remains both a challenging and time-consuming process in the field of bioanalytical chemistry. Many traditional techniques often require multi-step processes, which can introduce additional errors to the analytical method. Given the complexity of many biological matrices, thorough analyte extraction presents a major challenge to researchers. In the present study, a headspace solid-phase microextraction (HS-SPME) coupled with a GC/Q-ToF-MS method, was developed to quantify in vitro metabolism of β-caryophyllene by both human liver microsome (HLM) and S9 liver fractions. Validation of the method was demonstrated both in terms of linearity (R2 = 0.9948) and sensitivity with a limit of detection of 3 ng/mL and a limit of quantitation of 10 ng/mL. In addition, the method also demonstrated both inter- and intra-day precision with the relative standard deviation (RSD) being less than 10% with four concentrations ranging from 50–500 ng/mL. Since this method requires no solvents and minimal sample preparation, it provides a rapid and economical alternative to traditional extraction techniques. The method also eliminates the need to remove salts or buffers, which are commonly present in biological matrices. Although this method was developed to quantify in vitro metabolism of one analyte, it could easily be adapted to detect or quantify numerous volatiles and/or semi-volatiles found in biological matrices.

Influence of different sample preparation strategies on hypothesis-driven shotgun proteomic analysis of human saliva

This research aimed to find an efficient and repeatable bottom-up proteolytic strategy to process the unstimulated human saliva. The focus is on monitoring immune system activation via the cytokine and interleukin signaling pathways. Carbohydrate metabolism is also being studied as a possible trigger of inflammation and joint damage in the context of the diagnostic procedure of temporomandibular joint disorder. The preparation of clean peptide mixtures for liquid chromatography–mass spectrometry analysis was performed considering different aspects of sample preparation: the filter-aided sample preparation (FASP) with different loadings of salivary proteins, the unfractionated saliva, amylase-depleted, and amylase-enriched salivary fractions. To optimize the efficiency of the FASP method, the protocols with the digestion in the presence of 80% acetonitrile and one-step digestion in the presence of 80% acetonitrile were used, omitting protein reduction and alkylation. The digestion procedures were repeated in the standard in-solution mode. Alternatively, the temperature of 24 and 37°C was examined during the trypsin digestion. DyNet analysis of the hierarchical networks of Gene Ontology terms corresponding to each sample preparation method for the bottom-up assay revealed the wide variability in protein properties. The method can easily be tailored to the specific samples and groups of proteins to be examined.

Investigation of Early Death-Induced Changes in Rat Brain by Solid Phase Microextraction via Untargeted High Resolution Mass Spectrometry: In Vivo versus Postmortem Comparative Study

Analysis of brain samples obtained postmortem remains a standard approach in neuroscience, despite often being suboptimal for inferring roles of small molecules in the pathophysiology of brain diseases. Sample collection and preservation further hinders conclusive interpretation of biomarker analysis in autopsy samples. We investigate purely death-induced changes affecting rat hippocampus in the first hour of postmortem interval (PMI) by means of untargeted liquid chromatography-mass spectrometry-based metabolomics. The unique possibility of sampling the same brain area of each animal both in vivo and postmortem was enabled by employing solid phase microextraction (SPME) probes. Four millimeter probes coated with mixed mode extraction phase were used to sample awake, freely roaming animals, with 2 more sampling events performed after death. Significant changes in brain neurochemistry were found to occur as soon as 30 min after death, further progressing with increasing PMI, evidenced by relative changes in levels of metabolites and lipids. These included species from several distinct groups, which can be classified as engaged in energy metabolism-related processes, signal transduction, neurotransmission, or inflammatory response. Additionally, we perform thorough analysis of interindividual variability in response to death, which provides insights into how this aspect can obscure conclusions drawn from an untargeted study at single metabolite and pathway level. The results suggest high demand for systematic studies examining the PMI time course with in vivo sampling as a starting point to eliminate artifacts in the form of neurochemical changes assumed to occur in vivo.

Novel SPME fibers based on a plastic support for determination of plasma protein binding of thiosemicarbazone metal chelators: a case example of DpC, an anti-cancer drug that entered clinical trials

Solid-phase microextraction (SPME) is an alternative method to dialysis and ultrafiltration for the determination of plasma protein binding (PPB) of drugs. It is particularly advantageous for complicated analytes where standard methods are not applicable. Di-2-pyridylketone 4-cyclohexyl-4-methyl-3-thiosemicarbazone (DpC) is a lead compound of novel thiosemicarbazone anti-cancer drugs, which entered clinical trials in 2016. However, this agent exhibited non-specific binding on filtration membranes and had intrinsic chelation activity, which precluded standard PPB methods. In this study, using a simple and fast procedure, we prepared novel SPME fibers for extraction of DpC based on a metal-free, silicon string support, covered with C18 sorbent. Reproducibility of the preparation process was demonstrated by the percent relative standard deviation (RSD) of ≤ 9.2% of the amount of DpC extracted from PBS by several independently prepared fibers. The SPME procedure was optimized by evaluating extraction and desorption time profiles. Suitability of the optimized protocol was verified by examining reproducibility, linearity, and recovery of DpC extracted from PBS or plasma. All samples extracted by SPME were analyzed using an optimized and validated UHPLC-MS/MS method. The developed procedure was applied to the in vitro determination of PPB of DpC at two clinically relevant concentrations (500 and 1000 ng/mL). These studies showed that DpC is highly bound to plasma proteins (PPB ≥ 88%) and this did not differ significantly between both concentrations tested. This investigation provides novel data in the applicability of SPME for the determination of PPB of chelators, as well as useful information for the clinical development of DpC. Graphical abstract.

Direct sampling mass spectrometry for clinical analysis

Direct sampling mass spectrometry (MS) has been advancing aggressively, showing immense potential in translating MS into the clinical field. Unlike traditional MS analysis involving extensive sample preparation and chromatographic separation, quick and simple procedures with minimal sample pretreatment or purification became available with direct sampling. An overview of the development in this field is provided, including some representative ambient ionization and fast extraction methods. Quantitative applications of these methods are emphasized and their efficacy are highlighted from a clinical aspect; non-quantitative applications in clinical analysis are also discussed. This review also discusses the integration of direct sampling MS with miniature mass spectrometers and its future outlook as an emerging clinical tool for point-of-care analysis.

Point-of-Care Tissue Analysis Using Miniature Mass Spectrometer

The combination of direct sampling ionization and miniature mass spectrometer presents a promising technical pathway of point-of-care analysis in clinical applications. In this work, a miniature mass spectrometry system was used for analysis of tissue samples. Direct tissue sampling coupled with extraction spray ionization was used with a home-built miniature mass spectrometer, Mini 12. Lipid species in tissue samples were well profiled in rat brain, kidney, and liver in a couple of minutes. By incorporating a photochemical (Paternò-Büchi) reaction, fast identification of lipid C═C location was realized. Relative quantitation of the lipid C═C isomer was performed by calculating the intensity ratio C═C diagnostic product ions, by which FA 18:1 (Δ9)/FA 18:1 (Δ11) was found to change significantly in mouse cancerous breast tissue samples. Accumulation of 2-hydroxylglutarate in human glioma samples, not in normal brains, can also be easily identified for rapid diagnosis.

Study on the interaction between active components from traditional Chinese medicine and plasma proteins

Traditional Chinese medicine (TCM), as a unique form of natural medicine, has been used in Chinese traditional therapeutic systems over two thousand years. Active components in Chinese herbal medicine are the material basis for the prevention and treatment of diseases. Research on drug-protein binding is one of the important contents in the study of early stage clinical pharmacokinetics of drugs. Plasma protein binding study has far-reaching influence on the pharmacokinetics and pharmacodynamics of drugs and helps to understand the basic rule of drug effects. It is important to study the binding characteristics of the active components in Chinese herbal medicine with plasma proteins for the medical science and modernization of TCM. This review summarizes the common analytical methods which are used to study the active herbal components-protein binding and gives the examples to illustrate their application. Rules and influence factors of the binding between different types of active herbal components and plasma proteins are summarized in the end. Finally, a suggestion on choosing the suitable technique for different types of active herbal components is provided, and the prospect of the drug-protein binding used in the area of TCM research is also discussed.

A novel polyaniline/polypyrrole/graphene oxide fiber for the determination of volatile organic compounds in headspace gas of lung cell lines

Exploration of volatile organic compounds (VOCs) generated by lung cell lines is a powerful and non-invasive tool for the detection of potential volatile biomarkers of lung cancer. In this study, a simple and sensitive solid phase microextraction-gas chromatography-mass spectrometry (SPME-GC-MS) method was developed for the determination of VOCs in the headspace gas of lung cell lines. For the purpose of preconcentration, a novel polyaniline/polypyrrole/graphene oxide (PANI/PPy/GO) coating was prepared on the surface of stainless steel fiber via in-situ electrochemical deposition for the first time. The characteristic properties of the coating were studied and the results revealed that the coating possessed large surface area, high extraction efficiency, excellent thermal and mechanical stability as well as long lifespan. Some parameters affecting the extraction efficiency such as synthesis conditions, extraction and desorption conditions were optimized. Under the optimal conditions, the method displayed relatively wide linear range (three or four orders of magnitude) with correlation coefficients above 0.9916. Low detection limits from 1.0 to 12ngL^-1 were obtained. Relative standard deviations ranged from 1.2% to 18.0% indicating good repeatability and reproducibility of the method. This method has been successfully applied to analyze VOCs in the headspace gas of lung adenocarcinoma epithelial cell line (A549) and human embryonic fibroblast cell line (MRC-5).