Rapid multiresidue analysis of authorized/banned cyclopolypeptide antibiotics in feed by liquid chromatography–tandem mass spectrometry based on dispersive solid-phase extraction

Applications of tandem mass spectrometry (MS/MS) in antimicrobial peptides field: Current state and new applications

Antimicrobial peptides (AMPs) constitute a group of small molecular peptides that exhibit a wide range of antimicrobial activity. These peptides are abundantly present in the innate immune system of various organisms. Given the rise of multidrug-resistant bacteria, microbiological studies have identified AMPs as potential natural antibiotics. In the context of antimicrobial resistance across various human pathogens, AMPs hold considerable promise for clinical applications. However, numerous challenges exist in the detection of AMPs, particularly by immunological and molecular biological methods, especially when studying of newly discovered AMPs in proteomics. This review outlines the current status of AMPs research and the strategies employed in their development, considering resent discoveries and methodologies. Subsequently, we focus on the advanced techniques of mass spectrometry for the quantification of AMPs in diverse samples, and analyzes their application, advantages, and limitations. Additionally, we propose suggestions for the future development of tandem mass spectrometry for the detection of AMPs.

Label-free electrochemical immunosensor based on staphylococcal protein a and AgNPs-rGO-Nf for sensitive detection of virginiamycin M1

Virginiamycin (VIR), a feed additive, is used to promote pig and poultry growth. However, it is hazardous to human health. This work described a label-free electrochemical immunosensor based on silver nanoparticles-reduced graphene oxide (AgNPs-rGO) nanocomposites and staphylococcal protein A (SPA) for the first time to directly detect the residual marker VIR M1. Good catalytic currents for oxygen reduction reaction were apparently obtained after the modification of nanocomposites on gold electrode. Nanocomposites were characterized using UV-Vis, X-ray diffraction (XRD) patterns, Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). SPA was targeted to immobilize VIR M1 monoclonal antibody (mAb) by binding to Fc region of antibody. The proposed immunosensor showed a wide linear range from 0.25 ng mL^-1 to 100 ng mL^-1, providing detection limit (LOD) of 0.18 ng mL^-1 of VIR M1. Recovery rates ranged from 92.27% to 98.84%, and relative standard deviation (RSD) was not above 6.6%, indicating the immunosensor could detect VIR M1 in actual samples with high accuracy. The sensor showed good selectivity, reproducibility and stability and could be considered as a potential tool for detection of VIR M1 in feed and animal derived food.

Synthesis and Characterization of Colistin-Functionalized Silica Materials for Rapid Capture of Bacteria in Water

In this study, a new colistin-functionalized silica gel material (SiO₂@NH₂@COOH@CST) was synthesized after carboxylation on the surface of amino-modified silica. The main factors affecting the adsorptive properties of the material, such as the types of linkers, the linking methods, the reaction buffers and the particle sizes of carriers, were systematically investigated. The SiO₂@NH₂@COOH@CST was characterized by means of electron microscopy, Fourier-transform infrared spectroscopy, zeta potential measurements, etc. We demonstrated that the sorbent showed good adsorption of Gram-negative bacteria. The adsorption efficiency of E. coli on SiO₂@NH₂@COOH@CST was 5.2 × 10¹¹ CFU/g, which was 3.5 times higher than that on SiO₂@NH₂@COOH, suggesting that electrostatic interactions between SiO₂@NH₂@COOH@CST and E. coli played a key role. The adsorption was quick, and was reached in 5 min. Both pseudo-first-order and pseudo-second-order kinetic models fit well with the dynamic adsorption process of SiO₂@NH₂@COOH@CST, indicating that physical adsorption and chemisorption might occur simultaneously during the adsorption process. SiO₂@NH₂@COOH@CST was successfully applied for the rapid capture of bacteria from water. The synthesized material could be used as a potential means of bacterial isolation and detection.

Pretreatment Methods for the Determination of Antibiotics Residues in Food Samples and Detected by Liquid Chromatography Coupled with Mass Spectrometry Detectors: A Review

With the increasing use of antibiotics worldwide, antibiotic monitoring has become a topic of concern. After metabolizing of antibiotics in animals, the metabolites enter the environment through excreta or ingested by the human body via food chain that may exacerbate the emergence of antibiotic resistance and then threaten human's life. This article summarized several analytical methods used for the determination of antibiotics in recent 10 years. Due to the complex matrices and low concentration level of antibiotics in the food samples, a reliable analysis method is required to maximize the recovery rate. Several techniques like solid phase extraction (SPE), dispersive liquid-liquid microextraction (DLLME) and QuEChERS have been frequently used in the pretreatment process for analytes extraction and concentration. After the pretreatment, ultra-high performance liquid chromatography combined with mass spectrometry has been a reliable method for quantitative analysis and is able to determine multiple antibiotics simultaneously. This review also gives an overview about analytical conditions for antibiotics residues in different food samples and their method validation parameters.

Surface molecularly imprinted solid-phase extraction for the determination of vancomycin and norvancomycin in milk by liquid chromatography coupled to tandem mass spectrometry

A simple and sensitive method based on surface molecularly imprinted solid-phase extraction (SMISPE) combined with liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed to determine the residues of vancomycin (VCM) and norvancomycin (NVCM) in milk samples. The imprinted polymer prepared with teicoplanin as a virtual template can specifically recognize VCM and NVCM. The samples were purified with SMISPE and analyzed by LC-MS/MS in positive ionization mode. The results showed that the VCM and NVCM had a good linear correlation in the range of 0.5 μg/kg to 50 μg/kg. The recoveries of target analytes were from 83.3% to 92.1%, and the limits of quantification were both 1.0 μg/kg. The matrix effects of VCM and NVCM were -11.0% and -3.43%, respectively. The proposed method can efficiently eliminate the interference from matrix compounds and reduce baseline noise, which is useful for the monitoring of the residues of VCM and NVCM in milk samples.

Development of a liquid chromatography-tandem mass spectrometry method to determine colistin, bacitracin and virginiamycin M1 at cross-contamination levels in animal feed

Cross-contamination of animal feed with antibiotics may occur during manufacturing in feed mills, because shared production lines can be used for medicated and non-medicated feed, but may also occur during transport, storage and at the farm level. This is a major issue in the current context where antimicrobial usage must be controlled in order to maintain their effectiveness. A LC-MS/MS method was developed for the determination of colistin, bacitracin A and virginiamycin M1 in feed for pigs, poultry and rabbits at concentrations similar to those encountered in cross-contamination. After investigating various issues related to colistin behaviour and matrix effects, we successfully validated this method according to the requirements of European regulations in terms of linearity, trueness, precision, limit of quantification and limit of decision. Trueness ranged 88.6-107.8% and precision ranged 12.6-21.2%. We then applied this method to the analysis of medicated pig feed to check the performance of the method on "real" samples of medicated feed. We subsequently analysed non-medicated pig, and rabbit feed samples, collected directly on farms, to check the rate of cross-contamination. No samples were contaminated by colistin, bacitracin, or virginiamycin.

Simultaneous determination of multiple polypeptide antibiotics residues in lake water by lyophilization combined with liquid chromatography-tandem mass spectrometry

It is significant to develop a method for the simultaneous determination of multiple polypeptide antibiotics residues in lake water because of the emergence of multidrug-resistant microorganisms in water. A sensitive, eco-friendly and simple method was developed for the determination of multiple polypeptide antibiotics, including vancomycin, teicoplanin, polymyxin B, colistin and bacitracin A in lake water using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Water samples were lyophilized to enrich them after adjusting the pH to 3. Then, 80% methanol in water containing 0.1% formic acid was used to reconstitute the residues for LC-MS/MS analysis. The results showed that target compounds were well separated and detected under the optimum instrumental conditions. The limits of detection and the limits of quantification of polypeptide antibiotics were in the range of 0.01 - 0.1 and 0.02 - 0.2 ng mL-1, respectively. The matrix-matched calibration curves of all compounds were linear in the calibration range of 1 - 200 ng mL-1. At three spiked levels of 0.2 (0.04), 0.4 (0.1) and 1.0 (0.2) ng mL-1 in lake water, the average recoveries of analytes were higher than 70%, except for teicoplanin, with relative standard deviations of less than 20%. Compared with other common sample pretreatment methods, the lyophilization process is simpler and more eco-friendly, achieving the simultaneous detection of multiple polypeptide antibiotics in lake water. The developed method is successfully applied to the routine monitoring of polypeptide antibiotics residues in lake water.

Understanding of Colistin Usage in Food Animals and Available Detection Techniques: A Review

Progress in the medical profession is determined by the achievements and effectiveness of new antibiotics in the treatment of microbial infections. However, the development of multiple-drug resistance in numerous bacteria, especially Gram-negative bacteria, has limited the treatment options. Due to this resistance, the resurgence of cyclic polypeptide drugs like colistin remains the only option. The drug, colistin, is a well-known growth inhibitor of Gram-negative bacteria like Acinetobacter baumanni, Enterobacter cloacae, Klebsiella pneumoniae, and Pseudomonas aeruginosa. Technological advancements have uncovered the role of the mcr-1(mobilized colistin resistance) gene, which is responsible for the development of resistance in Gram-negative bacteria, which make them distinct from other bacteria without this gene. Additionally, food animals have been determined to be the reservoir for colistin resistance microbes, from which they spread to other hosts. Due to the adverse effects of colistin, many developed countries have prohibited its usage in animal foods, but developing countries are still using colistin in animal food production, thereby imposing a major risk to the public health. Therefore, there is a need for implementation of sustainable measures in livestock farms to prevent microbial infection. This review highlights the negative effects (increased resistance) of colistin consumption and emphasizes the different approaches used for detecting colistin in animal-based foods as well as the challenges associated with its detection.

Evaluation of three ELISA kits for the screening of colistin residue in porcine and poultry muscle according to the European guideline for the validation of screening methods

Colistin is a polypeptide antibiotic mainly used in porcine and poultry to treat gastrointestinal infections. It has been included by the World Health Organisation (WHO) in the list of critically important human antibiotics of high priority for antimicrobial resistance since 2017. Therefore, it is necessary to develop specific and sensitive screening methods for this molecule. Screening for colistin with immunoassays is an interesting alternative to LC-MS/MS screening methods. The performance of three commercially available ELISA kits was evaluated in poultry and porcine muscles for the detection of colistin in regards to its European maximum residue limit (MRL) (150 µg/kg). The applicability of the three ELISA kits to the detection of colistin at or below the MRL in porcine and poultry muscles was demonstrated. The detection capabilities (CCβ) of two kits were or lower than or equal to the MRL (150 µg/kg). The lowest detection capability (30 µg/kg) was achieved with the third ELISA kit. The specificity of the three kits was very satisfactory (false positive rates 0%). The three kits are very specific for the detection of colistin (colistin A and B) and polymyxin B.

Analysis of peptide antibiotic residues in milk using liquid chromatography-high resolution mass spectrometry (LC-HRMS)

A liquid chromatography-high resolution mass spectrometry (LC-HRMS) method was developed and validated for the determination of residual peptide antibiotics (bacitracin A, colistin A and B, enramycin A and B, virginiamycin M1 and S1) in bovine milk. LC-HRMS accurate mass data provided the necessary selectivity and sensitivity to quantitate and identify these important antibiotics in milk at residue levels without extensive sample preparation. Milk samples were extracted using 0.3% formic acid in acetonitrile with 0.06% trifluoroacetic acid added to improve peptide recoveries. Sample clean-up was minimal with an aliquot of the extract evaporated and reconstituted in a formic acid/water-acetonitrile mixture and then filtered. LC separation was performed with 0.3% formic acid in the gradient to improve the peak shape and reproducibility of the peptide analytes. A Quadruple-Orbitrap HRMS instrument with full-scan MS1 data collection followed by all-ion-fragmentation was used to obtain the exact mass of the precursor and confirmatory product ions. One advantage of LC-HRMS is that a combination of multiple precursor ions, including different charge states or adducts, can be used for quantification. The method was validated at four concentration levels ranging from 12.5 to 200 ng/g in three types of bovine milk. For bacitracin A, colistins and enramycins, the average recoveries compared to solvent standards ranged between 70% and 120%. Average recoveries for virginiamycin residues in milk extracts were unacceptably high (up to 138%) using solvent standards, but recoveries using matrix-matched calibration were determined to be 90-115%. Matrix effects were found to be less than 25% for the other analytes when internal standard correction was used for the colistins. Intra-day relative standard deviations were generally below 15%. The method detection limits for the peptide antibiotic residues in milk (0.5 to 5.5 ng/g) were well below regulatory levels of concern.

Determination of Polypeptide Antibiotic Residues in Food of Animal Origin by Ultra-High-Performance Liquid Chromatography-Tandem Mass Spectrometry

A novel UHPLC-MS/MS method for the determination of polypeptide antibiotic residues in animal muscle, milk, and eggs was developed and validated. Bacitracin A, colistin A, colistin B, polymyxin B1, and polymyxin B2 were extracted from the samples with a mixture of acetonitrile/water/ammonia solution 25%, 80/10/10 (v/v/v), and put through further evaporation, reconstitution, and filtration steps. The chromatographic separation was performed on a C18 column in gradient elution mode. Mass spectral acquisitions were performed in selective multiple reaction monitoring mode by a triple quadrupole mass spectrometer. The method was validated according to the criteria of Commission Decision 2002/657/EC. The method quantifies polypeptides in a linear range from 10 to 1000 μg kg⁻¹, where the lowest concentration on the calibration curve refers to the limit of quantification (LOQ). The recoveries ranged from 70 to 99%, the repeatability was below 13%, and within-laboratory reproducibility was lower than 15%. The decision limit (CCα) and detection capability (CCβ) values were calculated, and ruggedness and stability studies were performed, to fulfill the criteria for confirmatory methods. Moreover, the developed method may also be used for screening purposes by its labor efficiency.

Probiotics in Animal Husbandry: Applicability and Associated Risk Factors

Probiotics have been emerging as a safe and viable alternative to antibiotics for increasing performance in livestock. Literature was collated via retrieved information from online databases, viz, PubMed, MEDLINE, ScienceDirect, Scopus, Web of Science and Google Scholar. Besides improved immunomodulation and nutrient digestibility, in-feed probiotics have shown drastic reductions in gastrointestinal tract-invading pathogens. However, every novel probiotic strain cannot be assumed to share historical safety with conventional strains. Any strain not belonging to the wild-type distributions of relevant antimicrobials, or found to be harbouring virulence determinants, should not be developed further. Modes of identification and the transmigration potential of the strains across the gastrointestinal barrier must be scrutinized. Other potential risk factors include the possibility of promoting deleterious metabolic effects, excessive immune stimulation and genetic stability of the strains over time. Adverse effects of probiotics could be strain specific, depending on the prevailing immunological and physiological condition of the host. The most crucial concern is the stability of the strain. Probiotics stand a good chance of replacing antibiotics in animal husbandry. The possibility of the probiotics used in animal feed cross-contaminating the human food chain cannot be downplayed. Thus, the established safety measures in probiotic development must be adhered to for a successful global campaign on food safety and security.