Development of a validated HPLC method for the separation and analysis of a Bromazepam, Medazepam and Midazolam mixture

A Comparative Study between Screen-Printed and Solid-Contact Electrodes for the Stability-Indicating Determination of Bromazepam

Stability-indicating methods are awesome tools to ensure the safety and efficacy of active pharmaceutical ingredients (APIs). An accurate comparative study involving the use of potentiometric sensors for the determination of bromazepam (BRZ) in the presence of its main product of degradation and impurity was performed by the fabrication of two membrane electrodes. A screen-printed electrode (SPE) and a solid-contact glassy carbon electrode (SCE) were fabricated and their performance optimized. The fabricated sensors showed a linear electrochemical response in the concentration range 1.0 × 10−6 M to 1.0 × 10−2 M. The electrodes exhibited Nernstian slopes of 59.70 mV/decade and 58.10 mV/decade for the BRZ-SPE and BRZ-SCE membrane electrodes, respectively. The electrochemical performance was greatly affected by the medium pH. They showed an almost ideal electrochemical performance between pH 3.0 and pH 6.0. The fabricated membranes were applied successfully for the quantification of BRZ in the presence of up to 90% of its degradation product. Moreover, a successful application of the fabricated electrodes was performed for the sensitive and selective quantification of BRZ in its tablet form without any pretreatment procedure.

Potentiometric Sensors for the Selective Determination of Benzodiazepine Drug Residues in Real Wastewater Effluents

The application of ion-selective electrodes (ISEs) in the detection and determination of environmental pollutants has become a very important mission in the last few years. Two selective and sensitive membrane electrodes were fabricated in the laboratory and intended to evaluate the electrochemical response of bromazepam (BRZ) using phosphotungstic acid (PTA) and sodium tetraphenylborate (TPB) as ion pairing agents. The linearity range of the fabricated electrodes was between 1 × 10−6 M to 1 × 10−3 M. Nernstian slopes of 54 mV/decade and 57 mV/decade were obtained for the BRZ-PTA and BRZ-TPB membrane electrodes, respectively. The performance of the fabricated membranes was optimum in the pH range of 3–6. Optimum electrochemical response was attained through the careful adjustment of all assay settings. The cited method was successfully applied for the selective determination of BRZ in either its pure form or real wastewater samples obtained from a pharmaceutical industrial plant. The main core of novelty in the suggested method lies in the application of the membranes for the sensitive, selective, and economic determination of BRZ in real wastewater effluents without the tedious sample pretreatment procedures. This can make the suggested method considered an eco-friendly method, as it minimizes the use of organic solvents and chemicals used in the pretreatment process.

Development and validation of a stability indicating RP-HPLC-DAD method for the determination of bromazepam

A reliable, selective and sensitive stability-indicating RP-HPLC assay was established for the quantitation of bromazepam (BMZ) and one of the degradant and stated potential impurities; 2-(2-amino-5-bromobenzoyl) pyridine (ABP). The assay was accomplished on a C18 column (250 mm × 4.6 mm i.d., 5 μm particle size), and utilizing methanol-water (70: 30, v/v) as the mobile phase, at a flow rate of 1.0 ml min-1. HPLC detection of elute was obtained by a photodiode array detector (DAD) which was set at 230 nm. ICH guidelines were adhered for validation of proposed method regarding specificity, sensitivity, precision, linearity, accuracy, system suitability and robustness. Calibration curves of BMZ and ABP were created in the range of 1-16 μg mL-1 with mean recovery percentage of 100.02 ± 1.245 and 99.74 ± 1.124, and detection limit of 0.20 μg mL-1 and 0.24 μg mL-1 respectively. BMZ stability was inspected under various ICH forced degradation conditions and it was found to be easily degraded in acidic and alkaline conditions. The results revealed the suitability of the described methodology for the quantitation of the impurity (ABP) in a BMZ pure sample. The determination of BMZ in pharmaceutical dosage forms was conducted with the described method and showed mean percentage recovery of 99.39 ± 1.401 and 98.72 ± 1.795 (n = 6), respectively. When comparing the described procedure to a reference HPLC method statistically, no significant differences between the two methods in regard to both accuracy and precision were found.

Stability indicating spectrophotometric methods for quantitative determination of bromazepam and its degradation product

Four simple, sensitive and selective stability indicating spectrophotometric methods are presented for quantitative determination of the benzodiazepine drug; bromazepam (BMZ) and one of its reported potential impurities and degradation product; 2-(2-amino-5-bromobenzoyl) pyridine (ABP) in methanol. Method A, is isoabsorptive point coupled with D⁰ method, where good linearity was obtained by measuring the absorbance of BMZ at 264 nm (A_iso) in the concentration range of 2-25 μg mL^-1, and the absorbance of ABP at its λ_max 396 nm in concentration range of 0.5-24 μg mL^-1. Method B, is ratio subtraction; the absorbance was measured at 233 nm for BMZ using 20 μg mL^-1 of ABP, while ABP was determined directly at its λ_max 396 nm using methanol as a solvent. Method C, was based on measuring the total peak amplitude of the first derivative of the ratio spectra (DD¹) of BMZ from 301 to 326 nm using 10 μg mL^-1 of ABP as a divisor and determination of ABP at peak amplitude of 293 nm using 5 μg mL^-1 of BMZ as a divisor. In method D, ratio difference method, good linearity was achieved for determination of BMZ and ABP by measuring the differences between the amplitudes of ratio spectra at 312 nm and 274 nm and differences between the amplitudes of ratio spectra at 274 nm and 312 nm, respectively. The stability of BMZ was investigated under different ICH recommended forced degradation conditions. The suggested methods were then successfully applied for determination of BMZ in its pharmaceutical formulations.

QuEChERS extraction of benzodiazepines in biological matrices

Two common analytical chemical problems often encountered when using chromatographic techniques in drug analysis are matrix interferences and ion suppression. Common sample preparation often involves the dilution of the sample prior to injection onto an instrument, especially for liquid chromatography–mass spectrometry (LC–MS) analyses. This practice frequently does not minimize or eliminate conditions that may cause ion-suppression and therefore, suffer more from reduced method robustness. In order to achieve higher quality results and minimize possible interferences, various sample preparation techniques may be considered. Through the use of QuEChERS (“catchers”), a novel sample preparation technique used for high aqueous content samples, benzodiazepines can be extracted from biological fluids, such as blood and urine. This approach has shown increased recoveries of target compounds when using quantification by both external and internal standard. This increase in the recoveries has been attributed to a matrix enhancement and was determined through the use of the method of standard addition. While improving the overall analytical method for gas chromatography–mass spectrometry (GC–MS) analysis, it is not clear if this approach represents an overall benefit for laboratories that have both GC–MS and high performance liquid chromatography tandem mass spectrometry (HPLC–MS/MS) capability. Demonstrating evidence of variable ionization (enhancement, ion source inertness, etc.), the method of quantification should be focused on in future studies.