Synthesis, characterization and evaluation of visible light active cadmium sulfide-graphitic carbon nitride nanocomposite: A prospective solar light harvesting photo-catalyst for the deactivation of waterborne pathogen

Photocatalytic deactivation of sulphate reducing bacteria using visible light active CuO/TiO2 nanocomposite photocatalysts synthesized by ultrasonic processing

Sulphate-reducing bacteria wreaks havoc to oil pipelines, as it is an active agent for scale formation in the oil production tubing, and plugging of reservoir rock around the oil wells, and this leads to the degradation of oil quality. In this work, we synthesized copper oxide/titanium dioxide nanocomposite photocatalysts with three different mass contents of copper oxide (10%, 20% and 30%) and used them as an effective photo-catalyst in the process of photo-catalytic deactivation of sulphate-reducing bacteria. The anchoring of copper oxide on titanium dioxide brought about the following positive attributes in copper oxide/titanium dioxide nanocomposite pertained to the photo-catalyst: (i) the material transformed to visible light active with the potential to harness the more efficient visible spectral region of the solar radiation, (ii) increased surface area on the photo-catalyst enhanced the number of active reaction sites in the material, and (iii) efficiently retarded the undesired photo-generated electron hole recombination to promote the photo-catalytic activity. Although, the photo-catalyst effective under both UV and visible light, the deactivation was found to be higher in visible radiation, particularly the nanocomposite with 20%- copper oxide on titanium dioxide showed the highest photocatalytic degradation with of Sulphate-reducing bacteria with a decay constant as high as 1.38 min ^-1 and the total depletion time as low as 8 min. It was confirmed that the bacterial deactivation was neither due to the bactericidal effect of the nanocomposite nor due to the light mediated deactivation.

A Review on Pulsed Laser Preparation of Nanocomposites in Liquids and Their Applications in Photocatalysis

The purpose of photocatalysis is to realize the conversion between solar energy and chemical energy, and it is essential to develop a high-performance photocatalyst under visible-light irradiation. The conventional methods for photocatalyst preparation are mainly wet chemical routes, and abundant yields can be obtained. However, the products are not neat and accompanied by chemical groups and impurities, which are not beneficial for the enhancement of photocatalytic performance. In recent years, as a powerful tool for nanomaterial fabrication, pulsed laser heating in a liquid medium has been utilized to prepare a variety of nanocomposites. Products with synergistic effects and high crystallinity can be rapidly prepared under pulsed laser selective heating, which is beneficial for obtaining more effective photocatalytic performance. In this review, the typical characteristics of pulsed laser heating in liquids and their prepared nanocomposites for photocatalytic applications are summarized. This review not only highlights the innovative works of pulsed-laser-prepared nanocomposites in liquids for photocatalysis but also briefly introduces the specific challenges and prospects of this field.

Semiconducting graphitic carbon nitride integrated membranes for sustainable production of clean water: A review

Semiconducting membranes integrated with nanomaterials have placed themselves in new emerging researches tremendously for seawater desalination, oil-water separation, disinfection, removal of inorganic as well as organic pollutants. Howbeit, only nanoparticles unified membranes show quite a lot lags in their performance, although some of these particles associated with the demerits of high cost. In contrast, graphitic carbon nitride incorporated membranes offered improved aforementioned properties corresponding to absolute essential qualities such as cost-effective, environmentally friendly, easy-to-operate, green manufacturing, anti-fouling, and low energy consumption. Moreover, their high mechanical strength, high stability against harsh environment and long-term utilization without flux reduction are strong plus. Even though there are some undeniable downsides of these membranes in real world applications as bulk synthesis, consistent dispersion of graphitic carbon nitride, low photocatalytic efficiency etc. Accordingly, in the present article, these frailties of the membranes having graphitic carbon nitride as a filler and their respective synthesis procedures and properties are discussed. A comprehensive analysis over the application of semiconducting graphitic carbon nitride incorporated membranes with and without special surface modification; and exploration of the future challenges and difficulties associated to these membranes are also reviewed. Consequently, the current article provides brief overview about graphitic carbon nitride integrated composite membranes as well as their applications, and it finished up with new thoughts of further improvements/modifications to overcome their shortcomings in actual environmental conditions.

Graphitic Carbon Nitride as a New Sustainable Photocatalyst for Textile Functionalization

As a promising organic semiconducting material, polymeric graphitic carbon nitride (g-C₃N₄) has attracted much attention due to its excellent optical and photoelectrochemical properties, thermal stability, chemical inertness, nontoxicity, abundance, and low cost. Its advantageous visible light-induced photocatalytic activity has already been beneficially used in the fields of environmental remediation, biological applications, healthcare, energy conversion and storage, and fuel production. Despite the recognized potential of g-C₃N₄, there is still a knowledge gap in the application of g-C₃N₄ in the field of textiles, with no published reviews on the g-C₃N₄-functionalization of textile materials. Therefore, this review article aims to provide a critical overview of recent advances in the surface and bulk modification of textile fibres by g-C₃N₄ and its composites to tailor photocatalytic self-cleaning, antibacterial, and flame retardant properties as well as to create a textile catalytic platform for water disinfection, the removal of various organic pollutants from water, and selective organic transformations. This paper highlights the possibilities of producing g-C₃N₄-functionalized textile substrates and suggests some future prospects for this research area.

Pulsed Laser in Liquids Made Nanomaterials for Catalysis

Catalysis is essential to modern life and has a huge economic impact. The development of new catalysts critically depends on synthetic methods that enable the preparation of tailored nanomaterials. Pulsed laser in liquids synthesis can produce uniform, multicomponent, nonequilibrium nanomaterials with independently and precisely controlled properties, such as size, composition, morphology, defect density, and atomistic structure within the nanoparticle and at its surface. We cover the fundamentals, unique advantages, challenges, and experimental solutions of this powerful technique and review the state-of-the-art of laser-made electrocatalysts for water oxidation, oxygen reduction, hydrogen evolution, nitrogen reduction, carbon dioxide reduction, and organic oxidations, followed by laser-made nanomaterials for light-driven catalytic processes and heterogeneous catalysis of thermochemical processes. We also highlight laser-synthesized nanomaterials for which proposed catalytic applications exist. This review provides a practical guide to how the catalysis community can capitalize on pulsed laser in liquids synthesis to advance catalyst development, by leveraging the synergies of two fields of intensive research.

Novel TiO2 Nanoparticles/Polysulfone Composite Hollow Microspheres for Photocatalytic Degradation

Nanosized titanium oxide (TiO₂) material is a promising photocatalyst for the degradation of organic pollutants, whereas the difficulty of its recycling hinders its practical application. Herein, we reported the preparation of a novel titanium oxide/polysulfone (TiNPs/PSF) composite hollow microspheres by the combination of Pickering emulsification and the solvent evaporation technique and their application for the photodegradation of methyl blue (MB). P25 TiO₂ nanoparticles dispersed on the surface of PSF microspheres. The porosity, density and photoactivity of the TiNPs/PSF composite microsphere are influenced by the TiO₂ loading amount. The composite microsphere showed good methyl blue (MB) removal ability. Compared with TiO₂ P25, and PSF, a much higher MB adsorption speed was observed for TiNPs/PSF microspheres benefited from their porous structure and the electrostatic attractions between the MB+ and the negatively charged PSF materials, and showed good degradation efficiency. For TiNPs/PSF composite microsphere with density close to 1, a 100% MB removal (10 mg L^-1) within 120 min at a catalyst loading of 2.5 g L^-1 can be obtained under both stirring and static condition, due to well dispersing of TiO₂ particles on the microsphere surface and its stable suspending in water. For the non-suspended TiNPs/PSF composite microsphere with density bigger than 1, the 100% MB removal can be only obtained under stirring condition. The removal efficiency of MB for the composite microspheres retained 96.5%, even after 20 cycles. Moreover, this composite microsphere also showed high MB removal ability at acidic condition. The high catalysis efficiency, excellent reusability and good stability make this kind of TiNPs/PSF composite microsphere a promising photocatalyst for the water organic pollution treatment.

Evaluation of bioactivities of zinc oxide, cadmium sulfide and cadmium sulfide loaded zinc oxide nanostructured materials prepared by nanosecond pulsed laser

The present study reports the preparation of cadmium sulfide (CdS) loaded zinc oxide (ZnO) nanostructured semiconductor material and its anti-bioactivity studies against cancerous and fungus cells. For composite preparation, two different mass ratios of CdS (10 and 20%) were loaded on ZnO (10%CdS/ZnO, 20%CdS/ZnO) using a 532 nm pulsed laser ablation in water media. The structural and morphological analyses confirmed the successful loading of nanoscaled CdS on the surface of ZnO particles, ZnO particles were largely spherical with average size ~50 nm, while CdS about 12 nm in size. The elemental and electron diffraction analyses reveal that the prepared composite, CdS/ZnO contained both CdS and ZnO, thus reaffirming the production of CdS loaded ZnO. The microscopic examination and MTT assay showed the significant impact of ZnO, CdS, and CdS loaded ZnO on human colorectal carcinoma cells (HCT-116 cells). Our results show that the prepared ZnO had better anticancer activities than individual CdS, and CdS loaded ZnO against cancerous cells. For antifungal efficacy, as-prepared nanomaterials were investigated against Candida albicans by examining minimum inhibitory/fungicidal concentration (MIC/MFC) and morphogenesis. The lowest MIC (0.5 mg/mL), and MFC values (1 mg/mL) were found for 10 and 20%CdS/ZnO. Furthermore, the morphological analyses reveal the severe damage of the cell membrane upon exposure of Candida strains to nanomaterials. The present study suggests that ZnO, CdS, and CdS loaded ZnO nanostructured materials possess potential anti-cancer and anti-fungal activities.