Water soluble 1,8-naphthalimide fluorescent pH probes and their application to bioimagings

Self-Associated 1,8-Naphthalimide as a Selective Fluorescent Chemosensor for Detection of High pH in Aqueous Solutions and Their Hg2+ Contamination

A novel diamino triazine based 1,8-naphthalimide (NI-DAT) has been designed and synthesized. Its photophysical properties have been investigated in different solvents and its sensory capability evaluated. The fluorescence emission of NI-DAT is significantly impacted by the solvent polarity due to its inherent intramolecular charge transfer character. Moreover, the fluorescence emission quenched at higher pH as a result of photo-induced electron transfer (PET) from triazine moiety to 1,8-naphthalimide after cleaving hydrogen bonds in the self-associated dimers. Furthermore, the new chemosensor exhibited a good selectivity and sensitivity towards Hg²⁺ among all the used various cations and anions in the aqueous solution of ethanol (5:1, v/v, pH = 7.2, Tampon buffer). NI-DAT emission at 540 nm was quenched remarkably only by Hg²⁺, even in the presence of other cations or anions as interfering analytes. Job's plot revealed a 2:1 stoichiometric ratio for NI-DAT/Hg²⁺ complex, respectively.

A Novel Fluorescent Probe for Determination of pH and Viscosity Based on a Highly Water-Soluble 1,8-Naphthalimide Rotor

A novel highly water-soluble 1,8-naphthalimide with pH and viscosity-sensing fluorescence was synthesized and investigated. The synthesized compound was designed as a molecular device in which a molecular rotor and molecular “off-on” switcher were integrated. In order to obtain a TICT driven molecular motion at C-4 position of the 1,8-naphthalimide fluorophore, a 4-methylpiperazinyl fragment was introduced. The molecular motion was confirmed after photophysical investigation in solvents with different viscosity; furthermore, the fluorescence-sensing properties of the examined compound were investigated in 100% aqueous medium and it was found that it could be used as an efficient fluorescent probe for pH. Due to the non-emissive deexcitation nature of the TICT fluorophore, the novel system showed low yellow–green emission, which represented “power-on”/“rotor-on” state. The protonation of the methylpiperazine amine destabilized the TICT process, which was accompanied by fluorescence enhancement indicating a “power-on”/“rotor-off” state of the system. The results obtained clearly illustrated the great potential of the synthesized compound to serve as pH- and viscosity-sensing material in aqueous solution.

A Highly Water-Soluble and Solid State Emissive 1,8-Naphthalimide as a Fluorescent PET Probe for Determination of pHs, Acid/Base Vapors, and Water Content in Organic Solvents

A new highly water-soluble 1,8-naphthalimide fluorophore designed on the “fluorophore-spacer-receptor1-receptor2” model has been synthesized. Due to the unusually high solubility in water, the novel compound proved to be a selective PET-based probe for the determination of pHs in aqueous solutions and rapid detection of water content in organic solvents. Based on the pH dependence of the probe and its high water solubility, the INH logic gate was achieved using NaOH and water as chemical inputs, where NaOH is the disabler and the water is an enabler. In addition, the probe showed effective fluorescence “off-on” reversibility on glass support after exposure to acid and base vapors, which defines it as a promising platform for rapid detection of acid/base vapors in the solid-state, thus extending the molecular sensing concept from solution to the solid support.

A fluorescent pH probe for evaluating the freshness of chicken breast meat

A fluorescent probe, Nap-MOR, based on the naphthalimide fluorophore, was designed and developed for pH measurement in aqueous solutions. Nap-MOR had a close linear relationship between fluorescence intensity and pH, in the range 4.5-8, which covers the full range of pH found in normal fresh, defective and spoiled meat. pH measurement with Nap-MOR was free from interference by a wide range of ions and biochemicals found in meat and the results were not significantly different in comparison with a pH meter. Therefore, Nap-MOR is a robust and convenient way to evaluate the freshness of chicken breast meat by measuring its pH.

Research Progress of Small Molecule Fluorescent Probes for Detecting Hypochlorite

Hypochlorous acid (HOCl) generates from the reaction between hydrogen peroxide and chloride ions via myeloperoxidase (MPO)-mediated in vivo. As very important reactive oxygen species (ROS), hypochlorous acid (HOCl)/hypochlorite (OCl⁻) play a crucial role in a variety of physiological and pathological processes. However, excessive or misplaced production of HOCl/OCl⁻ can cause variety of tissue damage and human diseases. Therefore, rapid, sensitive, and selective detection of OCl⁻ is very important. In recent years, the fluorescent probe method for detecting hypochlorous acid has been developed rapidly due to its simple operation, low toxicity, high sensitivity, and high selectivity. In this review, the progress of recently discovered fluorescent probes for the detection of hypochlorous acid was summarized with the aim to provide useful information for further design of better fluorescent probes.

Evaluation of the acidic strengths on electronic ground and excited states of proton transfer dye using Excitation-Emission fluorescence matrix (EEM) and Multivariate Curve Resolution with Alternating Least Squares (MCR-ALS)

Multivariate Curve Resolution with Alternating Least Squares (MCR-ALS) was for the first time successfully used to evaluate an intricate photophysical behavior, where deprotonation on the electronic ground state (S₀), intra and intermolecular proton transfer processes (ESPT and ESIPT) on the electronic excited state (S₁) can simultaneously be presented. In this sense, the organic dye 2-(2'-hydroxyphenyl)benzothiazole (HBT) was used as a proof-of-concept model, where MCR-ALS showed to be a powerful tool for discriminate chemical reactions that occur concomitantly on different potential energy surfaces, which include photochemical reactions. As a result, the chemometric method showed to be a straightforward approach for the determination of the acidic strengths of those equilibria were estimated as 8.61 and 1.11 to hydroxyl deprotonation on electronic ground and excited states, respectively.

Colorimetric Chemosensor and Turn on Fluorescence Probe for pH Monitoring Based on Xanthene Dye Derivatives and its Bioimaging of Living Escherichia coli Bacteria

A new turn on fluorescence probe based on 3',6'-dihydroxy-6-methyl-2-((pyridin-2-ylmethylene)amino)-4-(p-tolyl)spiro[benzo[f]isoindole-1,9'-xanthen]-3(2H)-one (BFFPH) derived from benzo[f]fluorescein was prepared. Full characterization of the prepared probe using spectroscopic analysis was described such as IR, NMR and MS spectra. The sensitivity of BFFPH for monitoring of pH change in alkaline medium was studied. BFFPH exhibited a high sensitivity to alkaline pH by two pKa values at 8.82 and 10.66 in UV/vis spectroscopy titration. The pH monitoring was studied in broad range of pH values (2.5-12.2) at two pKa values at 8.72 and 10.73 by recording the effect of pH on the fluorescence intensity of BFFPH. The acid-base reversibility character of the probe was investigated as well as the effect of the pH change on the fluorescence quantum yield. The application of the prepared BFFPH probe for detection of living Escherichia coli (E. coli) bacteria using confocal fluorescence microscope was investigated.

A selective fluorescence probe for copper(II) ion in aqueous solution based on a 1,8-naphthalimide Schiff base derivative

In order to realize real-time monitoring of Cu2+, a new fluorescent probe HL, a Schiff base derivative of N-n-butyl-4-[2]-1,8-naphthalimide, has been designed and synthesized. In methanol-HEPES [2-(4-(2-hydroxyethyl)-1-piperazinyl)-ethanesulfonic acid] solution (1:1, v/v, pH = 7.4) HL showed excellent selectivity towards Cu2+ over other common coexisting metal ions. The fluorescence intensity for HL showed a good linearity with the concentration of Cu2+ ions in the range of 0.5–5.0 μm. Based on combined fluorescence titration, Job’s plot analysis, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry results, Cu2+ forms a 1:2 complex with L. The fluorescence intensity of HL exhibits significant quenching after binding with Cu2+, owing to the strong, intrinsic paramagnetic behavior of Cu2+. Ultimately, in order to test the performance of the synthesized probe, HL was preliminarily applied to the determination of Cu2+ in the Yellow River and in tap water with satisfying results.

Photophysics of perylene monoimide-labelled organocatalysts

A fluorophore-tagged organocatalyst undergoes electron transfer in polar solvents allowing to sense the presence of its free quinuclidine catalytic site.

A two-photon fluorescent probe for basal formaldehyde imaging in zebrafish and visualization of mitochondrial damage induced by FA stress

A two-photon fluorescence probe Mito-FA-FP can monitor mitochondrial morphology change and image endogenous FA in vivo.

1,1′-Bi(2-naphthol-4,5-dicarboximide)s: blue emissive axially chiral scaffolds with aggregation-enhanced emission properties

Novel electron-deficient 1,1′-binaphthol derivatives bearing two dicarboximide groups at the peri-positions show intense blue luminescence and aggregation-enhanced emission characteristics.

A reaction-based luminescent switch-on sensor for the detection of OH- ions in simulated wastewater

A series of luminescent iridium(iii) complexes were synthesized and evaluated for their ability to interact with hydroxide ions in semi-aqueous media at ambient temperature. Upon the addition of OH^-, a nucleophilic aromatic substitution reaction takes place at the bromine groups of the N^N ligand of complex 1, resulting in the generation of a yellow-green luminescence. Complex 1 showed a 35-fold enhanced emission at pH 14 when compared to neutral pH, and the detection limit for OH^- ions was 4.96 μM. Complex 1 exhibited high sensitivity and selectivity, long-lived luminescence and impressive stability. Additionally, we have demonstrated the practical application of complex 1 to detect OH^- ions in simulated wastewater.

Synthesis, fluorescence-sensing and molecular logic of two water-soluble 1,8-naphthalimides

Two novel highly water-soluble fluorescence sensing 1,8-naphthalimides are synthesized and investigated. The novel compounds are designed on the "fluorophore-receptor₁-spacer-receptor₂" model as a molecular fluorescence probe for determination of cations and anions in 100% aqueous media. The novel probes comprising N-imide and N-phenylpiperazine or morpholine substituents are capable to operate simultaneously via ICT and PET signaling mechanism as a function of pH and to recognize selectively Cu²⁺ and Hg²⁺ over the other representative metal ions. Due to the remarkable fluorescence changes in the presence of protons, hydroxyl anions, Hg²⁺ and Cu²⁺, INH and doubly disabled INH logic gates are executed and the systems are able to act as a single output combinatorial logic circuit with four chemical inputs.

Fluorescent probes and bioimaging: alkali metals, alkaline earth metals and pH

All living species and life forms have an absolute requirement for bio-functional metals and acid-base equilibrium chemistry owing to the critical roles they play in biological processes. Hence, a great need exists for efficient methods to detect and monitor biometals and acids. In the last few years, great attention has been paid to the development of organic molecule based fluorescent chemosensors. The availability of new synthetic fluorescent probes has made fluorescence microscopy an indispensable tool for tracing biologically important molecules and in the area of clinical diagnostics. This review highlights the recent advances that have been made in the design and bioimaging applications of fluorescent probes for alkali metals and alkaline earth metal cations, including lithium, sodium and potassium, magnesium and calcium, and for pH determination within biological systems.

Novel nanosized water soluble fluorescent micelles with embedded perylene diimide fluorophores for potential biomedical applications: cell permeability, localization and cytotoxicity

Novel biocompatible water-soluble fluorescent micelles with embedded perylene diimides (PDI) for intracellular applications have been prepared by self assembling of amphiphilic poly(vinyl alcohol)-b-poly(acrylonitrile) (PVA-b-PAN) copolymers in the presence of synthesized fluorophores. Amphiphilic PVA-b-PAN copolymers were obtained by selective hydrolysis of well-defined poly(vinyl acetate)-b-poly(acrylonitrile) (PVAc-b-PAN) copolymer. The preparation of the novel fluorescence micelles consisting of PVA hydrophilic shell and PAN hydrophobic core with incorporated PDI fluorophores has been confirmed by DLS and TEM analysis. The cytotoxicity of the water-soluble fluorophores and their internalization into living cells depending on the micellar concentration have been tested. It was shown that they could successfully enter in living cells without destroying their morphology. The results obtained indicate that the novel water-soluble fluorescent micelles with embedded PDI fluorophores would be suitable for potential intracellular biomedical applications.

A novel fluorescent pH probe with valuable pKabased on a twisted intramolecular charge transfer mechanism, and its applications in cell imaging

A novel TICT-mechanism based pH probe with valuable pK_aof 5.32 has been developed. It is a promising visualizing agent for lysosomes in intracellular application.

A highly selective fluorescent sensor for Fe3+ based on covalently immobilized derivative of naphthalimide

In this paper, the fabrication and analytical characteristics of fluorescence-based ferric ion-sensing glass slides were described. To fabricate the sensor, a naphthalimide derivative (compound 1) with a terminal double bond was synthesized and copolymerized with 2-hydroxyethyl methacrylate (HEMA) on the activated surface of glass slides by UV irradiation. Upon the addition of Fe(3+) in 0.05 mol/L Tris/HCl (pH 6.02) at 25 °C, the fluorescence intensity of the resulting optical sensor decrease, which has been utilized as the basis for the selective detection of Fe(3+). The sensor can be applied to the quantification of Fe(3+) with a linear range covering form 1.0×10(-5) to 1.0×10(-3) M and a detection limit of 4.5×10(-6) M. The experiment results show that the response behavior of the sensor to Fe(3+) is pH-independent in medium condition (pH 5.00-8.00) and exhibits high selectivity for Fe(3+) over a large number of cations such as alkali, alkaline earth and transitional metal ions. Moreover, satisfactory reproducibility, reversibility and a rapid response were realized. The sensing membrane was found to have a lifetime at least 2 months. The accuracy and the precision of the method were evaluated by the analysis of the standard reference material, iron in water (1.0 mol/L HNO3). The developed sensor is applied for the determination of iron in pharmaceutical preparation samples with satisfactory results.