Thioxanthone-ethyl anthracene

Recent Advances in Monocomponent Visible Light Photoinitiating Systems Based on Sulfonium Salts

During the last decades, multicomponent photoinitiating systems have been the focus of intense research efforts, especially for the design of visible light photoinitiating systems. Although highly reactive three-component and even four-component photoinitiating systems have been designed, the complexity to elaborate such mixtures has incited researchers to design monocomponent Type II photoinitiators. Using this approach, the photosensitizer and the radical/cation generator can be combined within a unique molecule, greatly simplifying the elaboration of the photocurable resins. In this field, sulfonium salts are remarkable photoinitiators but these structures lack absorption in the visible range. Over the years, various structural modifications have been carried out in order to redshift their absorptions in the visible region. In this work, an overview of the different sulfonium salts activable under visible light and reported to date is proposed.

High-Performance Photoinitiating Systems for LED-Induced Photopolymerization

Currently, increasing attention has been focused on light-emitting diodes (LEDs)-induced photopolymerization. The common LEDs (e.g., LED at 365 nm and LED at 405 nm) possess narrow emission bands. Due to their light absorption properties, most commercial photoinitiators are sensitive to UV light and cannot be optimally activated under visible LED irradiation. Although many photoinitiators have been designed for LED-induced free radical polymerization and cationic polymerization, there is still the issue of the mating between photoinitiators and LEDs. Therefore, the development of novel photoinitiators, which could be applied under LED irradiation, is significant. Many photoinitiating systems have been reported in the past decade. In this review, some recently developed photoinitiators used in LED-induced photopolymerization, mainly in the past 5 years, are summarized and categorized as Type Ⅰ photoinitiators, Type Ⅱ photoinitiators, and dye-based photoinitiating systems. In addition, their light absorption properties and photoinitiation efficiencies are discussed.

The interaction of light-activatable 2-thioxanthone thioacetic acid with ct-DNA and its cytotoxic activity: Novel theranostic agent

In this study, a thioxanthone derivative, 2-Thioxanthone Thioacetic Acid (TXSCH₂COOH) was used to analyze the type of binding to calf thymus DNA in a physiological buffer (Tris-HCl buffer solution, pH:7.0). Several spectroscopic techniques were employed including UV-Vis absorption and fluorescence emission spectroscopy and viscosity measurements were also used to clarify the binding mode of TXSCH₂COOH to ct-DNA. The intrinsic binding constant Kb of TXSCH₂COOH-ct-DNA was found as 2.5 × 10³ M^-1 from the absorption studies. Increasing of fluorescence emission intensity was found approximately 74.4% by adding ct-DNA to the TXSCH₂COOH solution. Fluorescence microscopy was employed to display imaging of the TXSCH₂COOH-ct-DNA solution. Increasing of the iodide quenching effect was observed when TXSCH₂COOH was added to the double stranded DNA and the calculated quenching constants of TXSCH₂COOH and TXSCH₂COOH-ct-DNA were found to be 1.89 × 10³ M^-1 and 1.19 × 10⁴ M^-1, respectively. Additionally, the iodide quenching experiment was conducted with single stranded DNA which led to a high Ksv value. All the experimental results including the viscosity values of ct-DNA with TXSCH₂COOH demonstrated that the binding of TXSCH₂COOH to ct-DNA was most likely groove binding. Furthermore, TXSCH₂COOH was found to be an A-T rich minor groove binder. This was confirmed by the displacement assays with Hoechst 33258 compared to Ethidium Bromide. The in vitro cytotoxic activity measurements were performed by MTT assay on HT29 cell line for 72 h. TXSCH₂COOH exhibited notable cytotoxic activities compared to the standard chemotherapy drugs, fluorouracil (5-FU), cisplatin in tumorigenic HT29 cell line. The 50% growth-inhibitory concentration (IC₅₀) for TXSCH₂COOH was 19,8 μg/mL while 5-FU and cisplatin were 28.9 μg/mL, 20 μg/mL, respectively. The increase in cytotoxic effect when TXSCH₂COOH is activated by light indicates the potential of being theranostic cancer drug candidate.

In silico rational design by molecular modeling of new ketones as photoinitiators in three-component photoinitiating systems: application in 3D printing

New photoinitiators for 3D printing were in silico developed by molecular modeling.

Photophysical and electrochemical properties of newly synthesized thioxathone–viologen binary derivatives and their photo-/electrochromic displays in ionic liquids and polymer gels

Photo- and electrochromic devices based on thioxathone–viologen derivatives were constructed in ionic liquid and gels, which displayed a good transmittance and reversible colour change behaviour under visible light radiation or a bias of −2.4 V.

Studies of the binding mode of TXNHCH2COOH with calf thymus DNA by spectroscopic methods

In this study, a thioxanthone derivative named 2-(9-oxo-9H-thioxanthen-2ylamino) acetic acid (TX-NHCH2COOH) was used to investigate small molecule and DNA binding interactions. Absorption and fluorescence emission spectroscopy were used and melting studies were used to explain the binding mode of TXNHCH2COOH-DNA. Intrinsic binding constant Kb TXNHCH2COOH was found 6×10(5)M(-1)from UV-Vis absorption spectroscopy. Fluorescence emmision intensity increased by adding ct-DNA to the TXNHCH2COOH and KI quenching experiments resulted with low Ksv value. Additionally, 3.7°C increase for Tm was observed. The observed quenching of EB and ct-DNA complex and increase viscosity values of ct-DNA by addition of TXNHCH2COOH was determined. All those results indicate that TXNHCH2COOH can intercalate into DNA base pairs. Fluorescence microscopy helped to display imaging of the TXNHCH2COOH-DNA solution.

Amino and nitro substituted 2-amino-1H-benzo[de]isoquinoline-1,3(2H)-diones: as versatile photoinitiators of polymerization from violet-blue LED absorption to a panchromatic behavior

The well-designed 2-amino-1H-benzo[de]isoquinoline-1,3-(2H)-dione derivatives exhibit an excellent photopolymerization ability upon LEDs.

Shining a light on an adaptable photoinitiator: advances in photopolymerizations initiated by thioxanthones

This review focuses on the advancements and progress in photoinitiated polymerization techniques mediated by thioxanthone (TX) and its derivatives.

Photochemistry and radical chemistry under low intensity visible light sources: application to photopolymerization reactions

The search for radical initiators able to work under soft conditions is a great challenge, driven by the fact that the use of safe and cheap light sources is very attractive. In the present paper, a review of some recently reported photoinitiating systems for polymerization under soft conditions is provided. Different approaches based on multi-component systems (e.g., photoredox catalysis) or light harvesting photoinitiators are described and discussed. The chemical mechanisms associated with the production of free radicals usable as initiating species or mediators of cations are reported.

Metal and metal-free photocatalysts: mechanistic approach and application as photoinitiators of photopolymerization

In the present paper, the photoredox catalysis is presented as a unique approach in the field of photoinitiators of polymerization. The principal photocatalysts already reported as well as the typical oxidation and reduction agents used in both reductive or oxidative cycles are gathered. The chemical mechanisms associated with various systems are also given. As compared to classical iridium-based photocatalysts which are mainly active upon blue light irradiation, a new photocatalyst Ir(piq)2(tmd) (also known as bis(1-phenylisoquinolinato-N,C (2'))iridium(2,2,6,6-tetramethyl-3,5-heptanedionate) is also proposed as an example of green light photocatalyst (toward the long wavelength irradiation). The chemical mechanisms associated with Ir(piq)2(tmd) are investigated by ESR spin-trapping, laser flash photolysis, steady state photolysis, cyclic voltammetry and luminescence experiments.

Visible light initiating systems for photopolymerization: status, development and challenges

A review of recent advances in visible light initiating systems using free radical, cationic and hybrid photoinitiators is presented.

One-component thioxanthone acetic acid derivative photoinitiator for free radical polymerization

Acetic acid-based thioxanthone (TXCH2 COOH) was synthesized and characterized and used as a photoinitiator for free radical photopolymerization of methyl methacrylate (MMA) in the absence and presence of a tertiary amine (MDEA) in different solvents. Different absorption properties were observed depending on the solvent. Fluorescence and phosphorescence experiments were also carried out successfully. The fluorescence quantum yield was found to be 0.09 and the phosphorescence lifetime was calculated as 138 ms at 77 K. The photoinitiator undergoes efficient intersystem crossing into the triplet state and the lowest triplet state possesses π-π* configuration. Laser flash photolysis experiments show that transient absorption of TXCH2 COOH is similar to the parent thioxanthone and the triplet lifetime was calculated as 2.3 μs at 630 nm.