A dichloro-substituted salicylimine as a bright yellow emissive probe for Al3+

A quinoline derived Schiff base as highly selective 'turn-on' probe for fluorogenic recognition of Al3+ ion

A quinoline-derived Schiff base QnSb has been synthesized for fluorescent and colorimetric recognition of Al3+ ions in a semi-aqueous medium. The compound QnSb has been characterized by elemental analysis, FT-IR, 1H/13C NMR, UV-Vis and fluorescence spectral techniques. The crystal structure of the QnSb was confirmed by single crystal X-ray diffraction (SC-XRD) analysis. Notably, almost non-fluorescent QnSb served as a 'turn on' responsive probe for Al3+ by inducing a remarkable fluorescence enhancement at 422 nm when excited at 310 nm. The probe QnSb exhibited high selectivity for Al3+ in CH3CN/H2O (4:1, v/v) solution over several competing metal ions (e.g., Mg2+, Pb2+, Zn2+, Cd2+, Co2+, Cu2+, Ca2+, Ni2+, Fe3+/2+, Cr3+, Mn2+, Sn2+, and Hg2+). The limit of detection (LoD) was computed as low as 15.8 nM which is significantly lower than the permissible limit set by WHO for Al3+ ions in drinking water. A 1:1 binding stoichiometry of complex QnSb-Al3+ was established with the help of Job's plot, ESI-MS, NMR and DFT analyses. Based on its remarkable sensing ability, the probe QnSb was utilized to establish molecular logic gates, and the fluorescence detection of Al3+ could clearly be demonstrated on the filter paper test strips.

A Simple Schiff Base as Fluorescent Probe for Detection of Al3+ in Aqueous Media and its Application in Cells Imaging

A novel fluorescence probe for the detection of Al³⁺ was developed based on methionine protected gold nanoclusters (Met-AuNCs). A fluorescent Schiff base (an aldimine) is formed between the aldehyde group of salicylaldehyde (SA) and the amino groups of Met on the AuNCs, and developed for selective detection of Al³⁺ in aqueous solution. Al³⁺ can strongly bind with the Schiff base ligands, accompanied by the blue-shift and an obvious fluorescence emission enhancement at 455 nm. The limits of detection (LODs) of the probe are 2 pmol L^-1 for Al³⁺. Moreover, the probe can successfully be used in fluorescence imaging of Al³⁺ in living cells (SHSY5Y cells), suggesting that the simple fluorescent probe has great potential use in biological imaging.

A novel AIE fluorescent probe for the monitoring of aluminum ions in living cells and zebrafish

A novel fluorescent probe BTD with aggregation induced emission (AIE) characteristics for the monitoring of Al³⁺ was developed. This fluorescent probe could be used to detect Al³⁺ in aqueous solution under mild conditions, along with high sensitivity and high selectivity. The detection limit of the probe BTD for Al³⁺ is as low as 3.25 nM, which is below the WHO recommendation concentration (7.41 μM) for drinking water. Furthermore, this probe was successfully applied to the sensing of Al³⁺ in living cells and zebrafish.

Exploiting the unique specialty of hydrazone functionality: Synthesis of a highly sensitive UV-Vis active solvatochromic probe

The unique physico-chemical attributes of the hydrazone functionality have been extensively studied for a diverse range of chemical, biological and analytical applications. The synthesis of a highly sensitive hydrazone based UV-Vis active solvatochromic probe that exhibits excellent sensitivity toward sensing of solvent polarity, microstructural changes and onset of micellization in aqueous systems was carried out. Specifically, synthesis of 2,4-dinitrophenyl-2-(2-nitrobenzylidene)hydrazone (DNPNBH), through an easy to carry, atom economical, one-pot single step approach via use of low-cost precursors viz. ortho-nitrobenzaldehyde and 2,4-dinitrophenyl hydrazine is presented. The UV-Vis absorption features of the synthesized hydrazone exhibit excellent sensitivity toward the polarity of its immediate microenvironment. The microenvironment polarity sensing potential of DNPNBH is demonstrated for some single solvent systems and DMF-Water mixture as a model binary solvent system and the results are supported by quantum mechanical calculations. Use of the DNPNBH as a probe (at concentrations many orders lower than required for conventional probes) to precisely reflect the onset of micellization and estimation of critical micelle concentration (CMC) of amphiphilic molecules (5.25 mM for SDS, 1.53 mM for CTAB and 0.055 mM for Brij56) in aqueous solutions is also demonstrated. The results clearly qualify the synthesized hydrazone as a highly sensitive UV-Vis probe that can be employed for reliable sensing of solvent polarity, composition dependence of physicochemical attributes in mixed solvent systems and the estimation of CMC of surfactant systems via spectrophotometry.

A novel dual-function probe for recognition of Zn2+ and Al3+ and its application in real samples

A dual-function probe NAHH based on naphthalene was synthesized and characterized. Based on the combination effects derived from the inhabitation of photo-induced electron transfer (PET) and CN isomerization, probe NAHH achieved in the recognition of Zn2+ and Al3+ both through obvious fluorescence enhancement and color changes detected by naked eye, respectively. Probe NAHH showed high sensitivity with the limit of detection as low as 3.02 × 10-7 M for Zn2+ and 7.55 × 10-8 M for Al3+, indicated the capability of probe NAHH in trace detection for Zn2+ and Al3+. The binding ratio of NAHH with Zn2+ and Al3+ were all 1:1 determined by Job plot, and the corresponding association constant was calculated as 8.48 × 104 M-1 and 4.45 × 105 M-1, respectively. The mechanism was further confirmed by FT-IR, 1H NMR titration and ESI-MS analysis. Furthermore, probe NAHH was successfully applied in logic gate construction and the detection of Zn2+ and Al3+ in Songhua River and test stripe. Fluorescence imaging experiments confirmed that NAHH could be used to monitor Zn2+ in plant root.

AIE active salicylaldehyde-based hydrazone: A novel single-molecule multianalyte (Al3+ or Cu2+) sensor in different solvents

A simple asymmetric hydrazone 1 based on salicylaldehyde was designed and prepared, and exhibited an evident aggregation-induced emission (AIE) at a long wavelength of 570 nm in aqueous medium. Probe 1 can selectively sense Al³⁺ in CH₃OH solution through the chelation-enhanced fluorescence mechanism and also recognize Cu²⁺ via fluorescence quenching in H₂O solution through the Cu²⁺-induced assembly of aggregates. In addition, the probe can be applied for detecting Cu²⁺ in biological samples.

Novel thiophene-based colorimetric and fluorescent turn-on sensor for highly sensitive and selective simultaneous detection of Al3+ and Zn2+ in water and food samples and its application in bioimaging

A novel bifunctional thiophene-based Schiff base TS as a colorimetric and fluorescent turn-on sensor for rapid and simultaneous detection of Al³⁺ and Zn²⁺ ions with high selectivity and sensitivity has been developed. The sensor shows remarkable fluorescence enhancement response for Al³⁺ and Zn²⁺ over a broad pH range with good anti-interference capability, which accompanied with an obvious color change easily detected by naked eyes. Sensor TS can detect as low as 3.7 × 10^-9 M for Al³⁺ and 3.0 × 10^-8 M for Zn²⁺, whereas respective association constants are 1.16 × 10⁴ M^-1 and 2.08 × 10⁴ M^-1. With the help of fluorescence titration and Job's plot, the stoichiometric ratio of TS with Al³⁺/Zn²⁺ was determined to be 1:1. The sensing mechanism of sensor TS with Al³⁺/Zn²⁺ based on the chelation-enhanced fluorescence (CHEF) was analyzed in detail through ¹H NMR titration, FTIR, HRMS and DFT studies. Moreover, sensor TS has been applied to the detection of Al³⁺ and Zn²⁺ in real environmental water and food samples as well as the filter paper-based test strips. Furthermore, sensor TS has good cell-permeability and can be used to selectively sense intracellular Al³⁺ and Zn²⁺ by bioimaging.

A simple hydrazone as a multianalyte (Cu2+, Al3+, Zn2+) sensor at different pH values and the resultant Al3+ complex as a sensor for F−

A new colorimetric and fluorescence molecular chemosensor based on triazole hydrazone can be used as a multi-probe for selective detection of Al³⁺, Zn²⁺, and Cu²⁺ by monitoring changes in the absorption and fluorescence spectral patterns. Results show that Al³⁺ and Zn²⁺ ions can induce remarkable fluorescence enhancement at pH 6.0 and pH 10.0, respectively, while the addition of Cu²⁺ ions leads to a significant UV-visible absorption enhancement in the visible range at pH 6.0. In addition, the resultant Al³⁺ complex could act as an ‘on–off’ fluorescence sensor for F⁻. The fluorescence sensor was also used to monitor intracellular Al³⁺, Zn²⁺, and F⁻ in Hela cells.

A fluorescent probe for Al³⁺ and Zn²⁺ was synthesised, and the resultant Al³⁺-complex was used for the detection of F⁻.