A novel diarylethene-based fluorescent switch with a carboxamidoquinoline unit for sensing of Zn(II) ion

Recent Advances in Photoswitchable Fluorescent and Colorimetric Probes

In recent years, significant advancements have been made in the research of photoswitchable probes. These probes undergo reversible structural and electronic changes upon light exposure, thus exhibiting vast potential in molecular detection, biological imaging, material science, and information storage. Through precisely engineered molecular structures, the photoswitchable probes can toggle between "on" and "off" states at specific wavelengths, enabling highly sensitive and selective detection of targeted analytes. This review systematically presents photoswitchable fluorescent and colorimetric probes built on various molecular photoswitches, primarily focusing on the types involving photoswitching in their detection and/or signal response processes. It begins with an analysis of various molecular photoswitches, including their photophysical properties, photoisomerization and photochromic mechanisms, and fundamental design concepts for constructing photoswitchable probes. The article then elaborates on the applications of these probes in detecting diverse targets, including cations, anions, small molecules, and biomacromolecules. Finally, it offers perspectives on the current state and future development of photoswitchable probes. This review aims to provide a clear introduction for researchers in the field and guidance for the design and application of new, efficient fluorescent and colorimetric probes.

Interfacial Self-Assembly of Organized Ultrathin Films of Tripodal Metal-Terpyridyl Coordination Polymers as Luminophores and Heterogeneous Catalysts for Photocatalytic CO2 Reduction

Metal-directed interfacial self-assembly of well-defined coordination polymer (CP) ultrathin films can control the metal complex arrangement and distribution at the molecular level, providing a convenient route for the design and fabrication of novel opto-electrical devices and heterogeneous catalysts. Here, we report the assembly of two series of CP multilayers with the transition-metal ions of Fe²⁺, Co²⁺, Zn²⁺ and Tb³⁺ as connectors and tripodal terpyridyl ligands of 4,4',4″-(1,3,5-triazine-2,4,6-triyl)tris(1-(4-([2,2':6',2″-terpyridin]-4'-yl)benzyl)pyridin-1-ium) (TerPyTa) and 4,4',4″-(benzene-1,3,5-triyl)tris(1-(4-([2,2':6',2″-terpyridin]-4'-yl)benzyl)pyridin-1-ium) (TerPyBen) as linkers at the air-water interface. The as-prepared Langmuir-Blodgett (LB) films display strong luminescence, with the emission wavelength and relative intensity dependent on both the metal ions and linkers; among them, the Zn-TerPyTa and Zn-TerPyBen CPs give off the strongest luminescent emission centered at about 370 nm with an emission lifetime of approximately 0.2-0.3 ns. The Tb-TerPyTa CPs can give off emission at approximately 490, 546, 586, and 622 nm, attributed to the ⁵D₄ to ⁷F_3-6 electron transitions of typical Tb³⁺ ions. Finally, these CP LB films can act as efficient heterogeneous photocatalysts for the CO₂ reduction to selectively produce CO. The catalytic efficiency can be optimized by adjusting the experimental conditions (light sensitizer, electron donor, and water content) and CP composition (metal ion and ligand) with an excellent yield of up to 248.1 mmol g^-1. In particular, it is revealed that, under the same conditions, the catalytic efficiency of the Fe-TerPyTa CP LB film is nearly 2 to 3 orders of magnitude higher than that of the other metalated complexes investigated in the homogeneous system. UV-vis spectroscopy and cyclic voltammetry studies demonstrated that the dual active sites of Fe-terpyridine and TerPyTa units contribute to the enhanced catalytic activity. This work provides an effective method to introduce the earth-abundant metal complexes into CP films to construct efficient noble-metal-free photocatalysts for the CO₂ reduction.

A facile gelator based on phenylalanine derivative is capable of forming fluorescent Zn-metallohydrogel, detecting Zn2+ in aqueous solutions and imaging Zn2+ in living cells

Supramolecular hydrogels are attracting soft materials with potential applications. In this study, we synthesized a facile gelator (named 2-QF) based on phenylalanine derivative with a Quinoline group. 2-QF can assemble to form hydrogels at room temperature in different colors under low pH values. Moreover, 2-QF was triggered to form a yellow metallohydrogel (2-QF-Zn) at high pH by the coordination between 2-QF and Zn²⁺. 2-QF-Zn metallohydrogel showed excellent multi-stimuli responsiveness, especially the reversible "on-off" luminescence switching, as induced by base/acid. In addition, at a low concentration, 2-QF can selectively and visibly identify Zn²⁺ through fluorescence enhancement, and can detect Zn²⁺ at physiological pH as a chemosensor. Remarkably, 2-QF and 2-QF-Zn exhibited an excellent biocompatibility without cell cytotoxicity, and 2-QF is able to penetrate live HeLa cells and image intracellular Zn²⁺ by a turn-on fluorescent response, which makes it a potential candidate for biomedical applications.

The Role of 8-Amidoquinoline Derivatives as Fluorescent Probes for Zinc Ion Determination

Mass-spectrometry-based and X-ray fluorescence-based techniques have allowed the study of the distribution of Zn2+ ions at extracellular and intracellular levels over the past few years. However, there are some issues during purification steps, sample preparation, suitability for quantification, and the instruments' availability. Therefore, work on fluorescent sensors based on 8-aminoquinoline as tools to detect Zn2+ ions in environmental and biological applications has been popular. Introducing various carboxamide groups into an 8-aminoquinoline molecule to create 8-amidoquinoline derivatives to improve water solubility and cell membrane permeability is also a recent trend. This review aims to present a general overview of the fluorophore 8-aminoquinoline and its derivatives as Zn2+ receptors for zinc sensor probes. Various fluorescent chemosensor designs based on 8-amidoquinoline and their effectiveness and potential as a recognition probe for zinc analysis were discussed. Based on this review, it can be concluded that derivatives of 8-amidoquinoline have vast potential as functional receptors for zinc ions primarily because of their fast reactivity, good selectivity, and bio-compatibility, especially for biological applications. To better understand the Zn2+ ion fluorophores' function, diversity of the coordination complex and geometries need further studies. This review provides information in elucidating, designing, and exploring new 8-amidoquinoline derivatives for future studies for the improvement of chemosensors that are selective and sensitive to Zn2+.

A highly selective multi-responsive fluorescence sensor for Zn2+ based on a diarylethene with a 4,6-dimethylpyrimidine unit

A novel turn-on mode fluorescent diarylethene containing a 4,6-dimethylpyrimidine unit was developed to fluorescently sense Zn²⁺. Its multiple-responsive properties induced by Zn²⁺/EDTA and ultraviolet/visible light have been systematically studied. The fluorescence sensor could efficiently detect Zn²⁺ with a 10 times enhancement of emission intensity and fluorescence color change (dark-green). In addition, the sensor showed clear discrimination from Cd²⁺. The limit of detection of the sensor was measured to be 8.48 × 10⁻⁸ mol L⁻¹ for Zn²⁺. Finally, a molecular logic circuit was fabricated with the emission at 528 nm as the output signal and light and chemical stimuli as input signals.

A novel multi-responsive fluorescence sensor based on a diarylethene derivative with a 4,6-dimethylpyrimidine unit was developed for Zn²⁺ detection.

A turn-on fluorescence sensor for the highly selective detection of Al3+ based on diarylethene and its application on test strips

A novel fluorescent sensor, 1O, based on photochromic diarylethene with a 2-hydroxybenzhydrazide unit was designed and synthesized and can be used to recognize Al³⁺ in methanol (2.0 × 10⁻⁵ mol L⁻¹).

A highly sensitive fluorescent sensor for Zn2+ based on diarylethene with an imidazole unit

A new sensitive sensor for Zn²⁺ based on diarylethene with an imidazole unit has been synthesized. Its photochromic and fluorescent behaviors have been systematically investigated by the stimulation of UV/vis lights and Zn²⁺ ion in THF solution. It displayed a dual-mode with a "turn on" fluorescence and color response to Zn²⁺. With the addition of Zn²⁺, the emission intensity enhanced 26-fold, accompanied by the fluorescent color changed from dark red to bright yellow. The 1:1 stoichiometry between the sensor and Zn²⁺ was verified by Job's plot and MS. The LOD for Zn²⁺ was determined to be 6.12 × 10^-9 mol L^-1. Furthermore, a logic circuit was designed by using the fluorescence at 578 nm as output and the combinational stimuli of UV/vis and Zn²⁺/EDTA as inputs.

Improved Access to 1,8-Diformyl-carbazoles Leads to Metal-Free Carbazole-Based [2 + 2] Schiff Base Macrocycles with Strong Turn-On Fluorescence Sensing of Zinc(II) Ions

Development of a new and high yielding synthetic route to 1,8-diformyl-carbazoles 3 (3a 3,6-di- tert-butyl substituted; 3b 3,6-unsubstituted) is reported. Use of a Heck coupling reaction, followed by ozonolysis, has greatly facilitated the preparation of these interesting head units in useful quantities. An initial foray into the new generations of Schiff base macrocycles that ready access to these head units (3) opens up, has led to the direct (i.e., metal-free) synthesis of two [2 + 2] macrocycles from 3a or 3b with 1,2-diaminoethane, H₂L^tBu (4a) and H₂L^H (4b), respectively, obtained as yellow powders in high yields (87-88%). The dizinc complex [Zn₂L^H(OAc)₂] (5b) was isolated as a bright yellow solid in 83% yield, by 1:2:2 reaction of H₂L^H with zinc(II) acetate and triethylamine. Aldehydes 3a and 3b, macrocycle H₂L^H, and complex [Zn₂L^H(OAc)₂] (5b) have been structurally characterized. The carbazole NH makes bifurcated hydrogen bonds with the pair of flanking 1,8-diformyl-moieties in 3, or 1,8-diimine-moieties in H₂L^H, leading to a flat, all- cis conformation. The stepped conformation of the metal-free macrocycle H₂L^H is retained in [Zn₂L^H(OAc)₂], despite deprotonation and binding of two zinc(II) centers within the two tridentate pockets. The N₃O₂ coordination of the zinc ions is completed by one μ_1,1- and one μ_1,3- bridging acetate anion. Excitation of nanomolar [Zn₂L^H(OAc)₂] in DMF at 335 nm results in clearly visible blue fluorescence (λ_max = 460 nm). Further studies on the H₂L^H macrocycle revealed turn-on fluorescence, with selectivity (over Ca²⁺, Mg²⁺ and a range of 3d dications) and nanomolar sensitivity for zinc(II) ions, highlighting one of the many potential applications for these new carbazole-based Schiff base macrocycles.