Direct solvothermal synthesis of zinc oxide nanoparticle decorated graphene oxide nanocomposite for efficient photodegradation of azo-dyes

Innovative enhancement of electron tunneling synergy in carbon-doped Ta2O5CuO photocatalyst with nematic liquid crystal for safe drinking water

This study focuses on enhancing the photocatalytic properties of carbon-doped Ta2O5CuO (C-Ta2O5CuO) nanocomposites for drinking water purification. The nanocomposites were fabricated by depositing C-Ta2O5CuO onto Nematic Liquid Crystal Polaroid (NLCP) obtained from a discarded laptop monitor, employing the sputter deposition method. The X-ray diffraction (XRD) and High-resolution transmission electron microscopy (HRTEM) determined the nanocomposite thin films' crystallinity and structural properties. The EDX and XPS analyses confirmed the elemental composition and reality of the Cu-incorporated Ta2O5 nanocomposites, respectively. The combination of electron tunneling enhancement provided by the NLCP and graphitic carbon led to exceptional photocatalytic performance. This was particularly evident in the efficient degradation of P-Rosaniline Hydrochloride (PRH) dye in an aqueous medium. C-Ta2O5CuO catalytic activities were estimated at various dye concentrations, repeatability, reusability with time, and kinetics. Coating's stability and long-term activity in photocatalysis reactions were also tested. Additionally, Cu present in the C-Ta2O5CuO and ˙OH radicals exhibited remarkable bactericidal activity. They displayed significant antibacterial efficacy against both gram-positive Escherichia coli (E. coli) and gram-negative Staphylococcus aureus (S. aureus) bacteria. These findings have significant implications for the development of advanced materials with potent photocatalytic and antibacterial properties, holding promise for improving drinking water quality and addressing environmental and health challenges.

A comprehensive review on the boosted effects of anion vacancy in the heterogeneous photocatalytic degradation, part I: Focus on sulfur, nitrogen, carbon, and halogen vacancies

The greenest environmental remediation way is the photocatalytic degradation of organic pollutants. However, limited photocatalytic applications are due to poor sunlight absorption and photogenerated charge carriers' recombination. These limitations can be overcome by introducing anion vacancy (AV) (O, S, N, C, and Halogen) defects in semiconductors that enhance light harvesting, facilitate charge separation, modulate electronic structure, and produce reactive radicals. In continuing part A of this review, in this part, we summarized the recent AVs' research, including S, N, C, and halogen vacancies on the boosted photocatalytic features of semiconductor materials, like metal oxides/sulfides, oxyhalides, and nitrides in detail. Also, we outline the recently developed AV designs for the photocatalytic degradation of organic pollutants. The AV creating and analysis methods and the recent photocatalytic applications and mechanisms of AV-mediated photocatalysts are reviewed. AV engineering photocatalysts' challenges and development prospects are illustrated to get a promising research direction.

A facile two-step hydrothermal preparation of 2D/2D heterostructure of Bi2WO6/WS2 for the efficient photodegradation of methylene blue under sunlight

A facile two-step hydrothermal method was successfully used to prepare a photocatalyst Bi2WO6/WS2 heterojunction for methyl blue (MB) photodegradation. Fabricated photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray analysis (EDX), and X-ray photoelectron spectroscopy (XPS). Band gap measurements were carried out by diffuse reflectance spectroscopy (DRS). Results indicated that the prepared heterostructure photocatalyst has increased visible light absorption. Photocatalytic performance was evaluated under sunlight irradiation for methylene blue (MB) degradation as a model dye. Variations in pH (4-10), amount of catalyst (0.025-0.1 g/L), and initial MB concentrations (5-20 ppm) were carried out, whereas all prepared catalysts were used to conduct the tests with a visible spectrophotometer. Degradation activity improved with the pH increase; the optimum pH was approximately 8. Catalyst concentration is directly related to degradation efficiency and reached 93.56% with 0.075 g of the catalyst. Among tested catalysts, 0.01 Bi2WO6/WS2 has exhibited the highest activity and a degradation efficiency of 99.0% in 40 min (min) for MB. MB photodegradation follows pseudo-first-order kinetics, and obtained values of kapp were 0.0482 min-1, 0.0337 min-1, 0.0205 min-1, and 0.0087 min-1 for initial concentrations of 5 ppm, 10 ppm, 15 ppm, and 20 ppm, respectively. The catalyst was reused for six cycles with a negligible decrease in the degradation activity. Heterostructure 0.01 Bi2WO6/WS2 has exhibited a photocurrent density of 16 μA cm-2, significantly higher than 2.0 and 4.5 μA cm-2 for the pristine WS2 and Bi2WO6, respectively. The findings from these investigations may serve as a crucial stepping stone towards the remediation of polluted water facilitated by implementing such highly efficient photocatalysts.

Defect mediated visible light induced photocatalytic activity of Co3O4 nanoparticle decorated MoS2 nanoflower: A combined experimental and theoretical study

In this work, Co₃O₄ nanoparticle-decorated MoS₂ (MoS₂@Co₃O₄) hetero-nanoflowers were synthesized by a facile hydrothermal method, and the effect of Co₃O₄ on the morphological, structural, optical, electronic, and photocatalytic properties of MoS₂ was analyzed. The surface morphology of MoS₂ and MoS₂@Co₃O₄ was studied via field emission electron microscopy (FE-SEM) and transmission electron microscopy (TEM), which revealed a strong interaction between the MoS₂ nanoflower and the nanoparticles. The X-ray diffraction pattern showed a decrease in the crystallite sizes from 7.35 nm to 6.26 nm due to the incorporation of Co₃O₄. The UV-Vis spectroscopy of the analysis revealed that the indirect band gap of MoS₂ was reduced from 1.89 eV to 1.65 eV with the incorporation of Co₃O₄ nanoparticles. Density functional theory (DFT) calculations were used to investigate the electronic properties of MoS₂ and MoS₂@Co₃O₄ hetero-nanoflowers, which also showed a reduction in the electronic band gap for the Co₃O₄ nanoparticles that were injected. The presence of defect states was also observed in the electronic property of MoS₂@Co₃O₄. The photocatalytic activity of the prepared composite and nanoflower is studied using an aqueous solution of methylene blue (MB), and the efficiencies are found to be 27.96% for MoS₂ and 78.89% for MoS₂@Co₃O₄. The improved photocatalytic efficiency of MoS₂@Co₃O₄ hetero-nanoflower can be attributed to narrowing the band gap together with the creation of defect states by the injection of nanoparticles that slows down electron-hole recombination rate by trapping charge carrier. The degradation analysis of the composite provides a new route for the purification of polluted water.

A critical review on application of organic, inorganic and hybrid nanophotocatalytic assemblies for photocatalysis of methyl orange dye in aqueous medium

Methyl orange (MO) is a highly carcinogenic and harmful contaminant, which has been extensively reported for its detrimental impact on human and aquatic life. The photodegradation of MO into less toxic products has gained much attention over the past few decades. Herein we have reviewed the recent advancement in designing of nanomaterials (NMs) stabilized on different fabricating assemblies and their application in photocatalysis of MO dye. These photocatalytic systems possess various advantages and disadvantages. Graphene-based supported materials on different NMs are highly reported photocatalysts for photocatalysis of MO dye. Recent advancement, parameters affecting photocatalytic studies, kinetics and photocatalytic mechanism of MO have been thoroughly explained in this review. Future outcomes are also provided for extending the development of scientific research in this field.

Synergistic effect of sorption and photocatalysis on the degree of dye removal in single and multicomponent systems on ZnO-SnO2

The paper presents the photodegradation process of one-, two- and three-component dye mixtures by ZnO-SnO₂ nanoparticles. After 60 min of running the processes, the dye removal efficiencies of 76.44, 72.69, 62.43, 77.00 and 92.46% for MB, RB, TB, MO and YQ degradation, respectively, were obtained. For binary and ternary systems, dye removal efficiencies for all cases exceeded 70%. When the binary and ternary dye mixtures were tested, the photodegradation efficiencies of ZnO-SnO₂ were similar to those of the single mixtures, indicating that this material could be used in industrial applications in the future. The focus of the study was to investigate the effect of sorption on photodegradation efficiency and the presence of both cationic and anionic dyes on their degradation efficiency under UV light. The significance of the effect of sorption on the degradation efficiency allowing the interaction of the catalyst with the dyes removed was confirmed. The main factor influencing sorption and consequently photocatalysis was the nature of the dye. It was confirmed that the positively charged ZnO-SnO₂ surface effectively sorbs the dyes and causes their degradation.

In situ construction of ZnFe2O4 nanospheres on CoO nanosheets for durable photodegradation of organics: kinetics and mechanistic insights

The development of a low-cost, efficient and sustainable technology is considered to be of paramount for the efficient degradation of toxic pollutants.

Investigation on visible light-driven antimicrobial and mechanistic activity of GO/TiO2(V–N) nanocomposite against wound pathogens

GO/TiO2(V–N) is fabricated as a visible light driven efficient antimicrobial material. In the presence of light, GO/TiO2(V–N) was employed as a photocatalytic active material against wound pathogens.

Eliminating pesticide quinalphos from surface waters using synthesized GO-ZnO nanoflowers: Characterization, degradation pathways and kinetic study

The presence of highly toxic and persistent pesticides in water bodies causes serious problems to human beings as well as aquatic life. Quinalphos is one such widely used organophosphorus pesticide in agricultural fields. Herein, for degradation and mineralization of quinalphos, ZnO nanoflowers and their hybrid nanocomposite with graphene oxide have been synthesized. FESEM analysis confirmed the formation of ZnO nanoflowers over nanosheets of graphene oxide having a thickness of 20 ± 10 nm. GO-ZnO composite exhibited remarkable photocatalytic activity in comparison to pure ZnO. 98 % degradation of quinalphos was achieved using GO-ZnO nano-catalyst at 6 pH within 45 min of irradiations, whereas it was 80 % for bare ZnO nanoflowers. Higher degradation with hybrid nanocomposite was attributed to improved surface area (36 m² g^-1), a substantial reduction in bandgap energy from 3.10 to 2.90 eV and enhanced charge separation (e^-/h⁺ pairs) after the addition of GO. Reaction kinetics study followed pseudo-first-order behaviour. Further, mineralization to the extent of 90 % in 90 min was confirmed by TOC analysis. Based on identified intermediates, using LCMS analysis, degradation pathways were proposed. The plausible pathways confirmed the presence of smaller and safer reaction intermediates supported by excitation of e^- from nanocomposite followed by oxidation of quinalphos with huge free radicals. Overall, this study is significant in terms of using photocatalysis as a tertiary treatment of quinalphos pesticide wastewater at pH 6 in a short duration.

Synthesis and characterization of ternary chitosan-TiO2-ZnO over graphene for photocatalytic degradation of tetracycline from pharmaceutical wastewater

Various nanocomposites of TiO₂-ZnO, TiO₂-ZnO/CS, and TiO₂-ZnO/CS-Gr with different molar ratios were synthesized by sol-gel and ultrasound-assisted methods and utilized under UV irradiation to enhance the photocatalytic degradation of tetracycline. Characterization of prepared materials were carried out by XRD, FT-IR, FE-SEM, EDX and BET techniques. The TiO₂-ZnO with the 1:1 molar ratio supported with 1:2 weight ratio CS-Gr (T1‒Z1/CS1‒Gr2 sample) appeared as the most effective material at the optimized operational conditions including the tetracycline concentration of 20 mg/L, pH = 4, catalyst dosage of 0.5 g/L, and 3 h of irradiation time. As expected, the graphene had a significant effect in improving degradation results. The detailed performances of the T1‒Z1/CS1‒Gr2 were compared with ternary nanocomposites from EDX and BET results as well as from the degradation viewpoint. This novel photocatalyst can be effective in actual pharmaceutical wastewater treatment considering the applied operational parameters.

Characterization and performance evaluation of synthesized ZnO nanoflowers, nanorods, and their hybrid nanocomposites with graphene oxide for degradation of Orange G

Nanoflowers and nanorods of ZnO were synthesized via hydrothermal route. These morphologies of zinc oxide (ZnO) were then decorated over graphene oxide (GO) to yield hybrid nanocomposites, namely, GO-ZnO_nR and GO-ZnO_nF. The decoration of ZnO nanorods and nanoflowers on GO layers was confirmed through FESEM images. The synthesized nanocomposites were subjected to degrade the Orange G under identical conditions. The band gap energies determined using diffused reflectance spectra were 2.87, 2.89 eV for GO-ZnO_nR, and GO-ZnO_nF, whereas, for both ZnO_nR and ZnO_nF, it was 3.14 eV. For 50 min of UV irradiations (at 6 pH), 100% degradation was achieved corresponding to GO-ZnO_nR (44.1 m² g^-1) followed by 90.1%, 70.2%, and 68.3% with GO-ZnO_nF (35.9 m² g^-1), ZnO_nR (20 m² g^-1), and ZnO_nF (15.1 m² g^-1), respectively. Significant boost in the degradation of Orange G, with GO-ZnO_nR, was attributed to its reduced band gap, higher surface area, and enhanced charge separation. Kinetic study confirms the pseudo-first-order reaction rate. Mineralization efficiency of 91% in 120 min indicated the efficient reduction of Orange G and its intermediates. Further, reactive species trapping experiments revealed that photo-induced ^•OH are dominant radicals for the degradation followed by ^•O₂^- and h⁺. Liquid chromatography mass spectra data has been used to predict the plausible reaction pathways. Reusability studies indicated that GO-ZnO_nR can be used for four successive degradation cycles, without any significant activity loss.

Synthesis, Characterization, and Photocatalytic Activities of Graphene Oxide/metal Oxides Nanocomposites: A Review

Sustainable water processing techniques have been extensively investigated and are capable of improving water quality. Among the techniques, photocatalytic technology has shown great potential in recent years as a low cost, environmentally friendly and sustainable technology. However, the major challenge in the industrial development of photocatalyst technology is to develop an ideal photocatalyst which must have high photocatalytic activity, a large specific surface area, harvest sunlight and shows recyclability. Keeping these views, the present review highlighted the synthesis approaches of graphene/metal oxide nanocomposite, characterization techniques and their prominent applications in photocatalysis. Various parameters such as photocatalyst loading, structure of photocatalyst, temperature, pH, effect of oxidizing species and wavelength of light were addressed which could affect the rate of degradation. Moreover, the formation of intermediates during photo-oxidation of organic pollutants using these photocatalysts is also discussed. The analysis concluded with a synopsis of the importance of graphene-based materials in pollutant removal. Finally, a brief overview of the problems and future approaches in the field is also presented.

Nanostructured TiO2 Sensitized with MoS2 Nanoflowers for Enhanced Photodegradation Efficiency toward Methyl Orange

Nanostructured titanium dioxide (TiO₂) has a potential platform for the removal of organic contaminants, but it has some limitations. To overcome these limitations, we devised a promising strategy in the present work, the heterostructures of TiO₂ sensitized by molybdenum disulfide (MoS₂) nanoflowers synthesized by the mechanochemical route and utilized as an efficient photocatalyst for methyl orange (MO) degradation. The surface of TiO₂ sensitized by MoS₂ was comprehensively characterized by X-ray diffraction (XRD), Raman spectroscopy, Fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), energy dispersive spectroscopy (EDS), UV-vis diffuse reflectance spectroscopy (UV-vis DRS), photoluminescence spectroscopy (PL), Brunauer-Emmett-Teller (BET) surface area, and thermogravimetric analysis (TGA). From XRD results, the optimized MoS₂-TiO₂ (5.0 wt %) nanocomposite showcases the lowest crystallite size of 14.79 nm than pristine TiO₂ (20 nm). The FT-IR and XPS analyses of the MoS₂-TiO₂ nanocomposite exhibit the strong interaction between MoS₂ and TiO₂. The photocatalytic results show that sensitization of TiO₂ by MoS₂ drastically enhanced the photocatalytic activity of pristine TiO₂. According to the obtained results, the optimal amount of MoS₂ loading was assumed to be 5.0 wt %, which exhibited a 21% increment of MO photodegradation efficiency compared to pristine TiO₂ under UV-vis light. The outline of the overall study describes the superior photocatalytic performance of 5.0 wt % MoS₂-TiO₂ nanocomposite which is ascribed to the delayed recombination by efficient charge transfer, high surface area, and elevated surface oxygen vacancies. The context of the obtained results designates that the sensitization of TiO₂ with MoS₂ is a very efficient nanomaterial for photocatalytic applications.

Molecularly imprinted polymer-based photocatalyst for highly selective degradation of methylene blue

ZnO quantum dots were synthesized by chemical precipitation, CuFe₂O₄ nanoparticles were prepared by in situ synthesis of cellulose, and then ZnO/CuFe₂O₄ (ZCF) composites were fabricated. A photocatalyst (ZCF@MB-MIP) with specific molecule recognition and photocatalytic degradation characteristics was then produced by a surface imprinting method using methylene blue (MB) as the template molecule. The structure of ZCF@MB-MIP was characterized by Fourier transform infrared spectroscopy, transmission electron microscopy and X-ray diffraction. The photocatalytic efficiency of ZCF@MB-MIP and its specific recognition performance in MB degradation was analyzed. The adsorption kinetics of MB by ZCF@MB-MIP conformed to the quasi-secondary adsorption kinetics model. ZCF@MB-MIP displayed effective photocatalytic degradation of MB under natural light. The degradation rate reached 95.8%, which was much higher than those of ZCF, CuFe₂O₄ nanoparticles, and a non-imprinted reference sample under the same conditions. This work is a useful reference for the construction of photocatalysts that show highly selective recognition of dye molecules.

Graphene Oxide Concentration Effect on the Optoelectronic Properties of ZnO/GO Nanocomposites

In this work, the effects of graphene oxide (GO) concentrations (1.5 wt.%, 2.5 wt.%, and 5 wt.%) on the structural, morphological, optical, and luminescence properties of zinc oxide nanorods (ZnO NRs)/GO nanocomposites, synthesized by a facile hydrothermal process, were investigated. X-ray diffraction (XRD) patterns of NRs revealed the hexagonal wurtzite structure for all composites with an average coherence length of about 40–60 nm. A scanning electron microscopy (SEM) study confirmed the presence of transparent and wrinkled, dense GO nanosheets among flower-like ZnO nanorods, depending on the GO amounts used in preparation. Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible (UV–Vis) absorption spectroscopy, and photoluminescence (PL) measurements revealed the impact of GO concentration on the optical and luminescence properties of ZnO NRs/GO nanocomposites. The energy band gap of the ZnO nanorods was independent of GO concentration. Photoluminescence spectra of nanocomposites showed a significant decrease in the intensities in the visible light range and red shifted suggesting a charge transfer process. The nanocomposites’ chromaticity coordinates for CIE 1931 color space were estimated to be (0.33, 0.34), close to pure white ones. The obtained results highlight the possibility of using these nanocomposites to achieve good performance and suitability for optoelectronic applications.

Designing Dual-Effect Nanohybrids for Removing Heavy Metals and Different Kinds of Anions from the Natural Water

In the present study, well-designed nanohybrids are used to act as effective dual-function adsorbents for removing both anions and heavy metals from natural water, at the same time. In this trend, Zn-Al LDHs and graphene oxide are applied to build up building blocks to produce a series of nanohybrids. These nanohybrids were characterized by X-ray diffraction, thermal analyses, Fourier transform infrared spectroscopy, Raman spectroscopy, and scanning and transmission electron microscopy. These techniques confirmed that the prepared nanohybrids contained nanolayered structures with three-dimensional porous systems. These porous systems were identified by the nitrogen adsorption-desorption isotherms and water purification experiments. The obtained results indicated that these nanohybrids included suitable structures to act as dual function materials. The first function was achieved by removing more than 80% of both cadmium and lead from the natural water. The second function was accomplished by eliminating of 100% of hydrogen phosphate and bromide anions alongside with 80%-91% of sulfate, chloride, and fluoride anions. To conclude, these well-designed nanohybrids convert two-dimensional nanolayered structures to three-dimensional porous networks to work as dual-function materials for removing of heavy metals and different kinds of anions naturally found in the fresh tap water sample with no parameters optimization.

Advances and Challenges in Developing Efficient Graphene Oxide-Based ZnO Photocatalysts for Dye Photo-Oxidation

The efficient remediation of organic dyes from wastewater is increasingly valuable in water treatment technology, largely owing to the tons of hazardous chemicals currently and constantly released into rivers and seas from various industries, including the paper, pharmaceutical, textile, and dye production industries. Using solar energy as an inexhaustible source, photocatalysis ranks among the most promising wastewater treatment techniques for eliminating persistent organic pollutants and new emerging contaminants. In that context, developing efficient photocatalysts using sunlight irradiation and effectively integrating them into reactors, however, pose major challenges in the technologically relevant application of photocatalysts. As a potential solution, graphene oxide (GO)-based zinc oxide (ZnO) nanocomposites may be used together with different components (i.e., ZnO and GO-based materials) to overcome the drawbacks of ZnO photocatalysts. Indeed, mounting evidence suggests that using GO-based ZnO nanocomposites can promote light absorption, charge separation, charge transportation, and photo-oxidation of dyes. Despite such advances, viable, low-cost GO-based ZnO nanocomposite photocatalysts with sufficient efficiency, stability, and photostability remain to be developed, especially ones that can be integrated into photocatalytic reactors. This article offers a concise overview of state-of-the-art GO-based ZnO nanocomposites and the principal challenges in developing them.

Designing Dual-Function Nanostructures for Water Purification in Sunlight

The current study aims at combining two building blocks together into well-designed nanostructures to act as dual-function materials; active photocatalysts in sunlight and effective adsorbents for increasing the efficiency of water purification. By these nanostructures, we could avoid the drawbacks of the existing technologies for water purification and remove the industrial pollutants by a dual process; adsorption and photocatalytic degradation. In this trend, Zn-Al layered double hydroxides (LDHs) are combined with graphene oxide to produce a series of nanolayered structures. These nanolayered structures are effective for converting Zn-Al LDHs to be photo-active in sunlight through decreasing its band gap energy from 5.5 eV to 2.5 eV. In addition, these nanolayered structures caused complete decolorization and mineralization of green dyes in sunlight through accelerating the reaction rate of the photocatalytic degradation of dyes seven times higher than that of the pure Zn-Al LDHs. In the same time, they improved the adsorption process of green dyes through creating new micro- and meso-porous structures and high surface area for Zn-Al LDHs. Finally, the well-designed nanostructures between Zn-Al LDHs and graphene oxide led to converting non-photoactive materials to be active in the visible light in addition to a complete and fast removal for organic pollutants.

Improved charge separation through H2O2 assisted copper tungstate for enhanced photocatalytic efficiency for the degradation of organic dyes under simulated sun light

In the recent years, copper tungstate (CuWO₄) has been widely researched for its photocatalytic properties as it responds in the visible light range to augment the utilization of solar energy. In the present report, CuWO₄ was synthesized through a facile and cost-effective solvothermal method, followed by annealing process at 700^∘C. The structural, morphological, compositional and optical property of the synthesized powders were examined by X-ray diffraction, scanning electron microscope, UV-visible, Raman and photoluminescence studies. The photocatalytic activity of the nanostructured CuWO₄ was evaluated by the degradation of methylene blue (MB) and methyl orange (MO) in aqueous solution under one sun light irradiation. The degradation efficiency of MB was found to be about 70% while that of MO was only 57% at 240 min in the same irradiation time. Surprisingly, the degradation process was accelerated by the addition of electron capturing agent H₂O₂ and thus MB dye was completely degraded within the time interval of 30 min while MO degraded in 75 min. These results prove that CuWO₄ nanoparticles possess significant photocatalytic activity towards MO and MB dyes, thus indicating the feasibility of using CuWO₄ for the active treatment of organic contaminants in the industrial effluents.

Facile synthesis of a novel nitrogen-doped carbon dot adorned zinc oxide composite for photodegradation of methylene blue

Nitrogen-doped carbon dot decorated zinc oxide nanoparticles were successfully fabricated by an economical wet-impregnation method and used as a photocatalyst for the degradation of aqueous methylene blue dye under UV-light at room temperature.

Room-temperature photodetectors and VOC sensors based on graphene oxide-ZnO nano-heterojunctions

The rapid development of smart wearable electronics is driving the engineering of novel miniaturized sensing materials that can rapidly respond to very small changes in the concentration of biomarkers at room temperature. Carbon-based nanomaterials offer numerous attractive properties such as low resistivity, good mechanical robustness and integration potential, but lack a strong detection and transduction mechanism for the measurement of chemical molecules or photons. Here, we present a three-dimensional nanostructured architecture comprising optimally integrated graphene oxide (GO)-ZnO heterojunctions for the room temperature sensing of volatile biomarkers. We show that this layout also provides excellent response to UV light showcasing its applicability as a visible-blind photodetector. Notably, the optimal integration of well-dispersed GO nanodomains in a 3D ZnO network significantly enhances the room-temperature chemical sensitivity and light responsivity, while higher GO contents drastically worsen the material performance. This is attributed to the different roles of GO at low and high contents. Small amounts of GO lead to the formation of electron depleted nano-heterojunctions with excellent electron-hole separation efficiency. In contrast, large amounts of GO form a percolating electrical network that inhibits the light and chemical-sensing properties of the ZnO nanoparticles. Our optimal GO-ZnO demonstrates 33 A W^-1 responsivity to UV light as well as the room temperature detection of volatile organic compounds down to 100 ppb. We believe that these findings provide guidelines for the future engineering of hybrid carbon-metal oxide devices for applications extending from optoelectronics to chemical sensing and electrocatalysis.

PdO/ZnO@mSiO2 Hybrid Nanocatalyst for Reduction of Nitroarenes

Development of a novel approach for synthesizing nanostructured catalysts and achieving further improvements in catalytic activity, effectiveness, and efficiency remains a major challenge. In this report, we describe the preparation of a nanostructured PdO/ZnO@mSiO2 hybrid nanocatalyst featuring well-dispersed PdO nanoparticles within hollow ZnO@mSiO2. The as-prepared PdO/ZnO@mSiO2 hybrid nanocatalyst exhibited good morphological features, derived from the controlled stepwise synthesis from Pd/PS@ZIF-8@mSiO2 (PS = polystyrene). The morphology, size, oxidation state, crystallinity, and thermal stability of the prepared PdO/ZnO@mSiO2 hybrid nanocatalyst were confirmed by a series of physicochemical techniques. The PdO/ZnO@mSiO2 hybrid nanocatalyst showed very high catalytic efficiency in the reduction of 4-nitrophenol and various nitroarenes under eco-friendly conditions. Therefore, the PdO/ZnO@mSiO2 hybrid nanocatalyst is a promising alternative catalyst for applications in environmental remediation.

Hydrothermal conversion of Magnolia liliiflora into nitrogen-doped carbon dots as an effective turn-off fluorescence sensing, multi-colour cell imaging and fluorescent ink

The present work illustrates the potential uses of nitrogen-doped multi-fluorescent carbon dots (N-CDs) for Fe³⁺ sensing, cellular multi-colour imaging, and fluorescent ink. N-CDs were synthesized using Magnolia liliiflora flower by the simple hydrothermal method. The resulted N-CDs was found to be nearly spherical in shape with the size of about 4 ± 1 nm and showed competitive quantum yield around 11%. The synthesized N-CDs with uniform size distribution and high content of nitrogen and oxygen-bearing functional groups exhibit excellent dispersibility in aqueous media. The N-CDs were able to detect a high concentration of Fe³⁺ ions (1-1000 μM) with a limit of detection is about 1.2 μM by forming N-CDs-Fe³⁺ complex due to the functional groups such as nitrogen, carbonyl and carboxyl on the surface of N-CDs. Thus they could be used to remove pollutants from industrial wastewater. The electronic charge on the surface of the N-CDs and N-CDs-Fe³⁺ complex (zeta potential) is around -36 and 18 mV, respectively. In addition, these N-CDs show excitation-dependent fluorescence that was utilized for multi-colour in vitro cellular imaging in rat liver cells (Clone 9 hepatocytes). The N-CDs are rapidly uptake in the cell cytoplasm and showed high cytocompatibility on cellular morphology. Moreover, as the N-CDs possess strong fluorescence and anti-coagulation they could be utilized in fluorescent ink pens.

Visible-light active tin selenide nanostructures: synthesis, characterization and photocatalytic activity

Photocatalytic activity and proposed reaction mechanism of degradation of Methylene Blue dye by SnSe nanostructures.