A probe into the effect of fixing the titanium dioxide by a conductive polymer and ceramic on the photocatalytic activity for degradation of organic pollutants

Efficient Degradation of Recalcitrant Pharmaceuticals in Greywater Using Treatment of MBR and Immobilized TiO2 Porous Layers

Traditional wastewater treatment often fails to remove pharmaceuticals, necessitating advanced solutions, such as TiO2 photocatalysis, for post-treatment. However, conventionally applied powder TiO2 can be cumbersome to separate from treated water. To solve this issue, this study immobilized three TiO2 photocatalysts (Anatase 16, Anatase 5, and P25) into porous layers and evaluated their efficacy for the degradation of three pharmaceuticals (naproxen, NPX; sulfamethoxazole, SMX; metformin, MTF) in standard solutions and greywater pretreated in a membrane bioreactor (MBR). In standard solutions, photocatalysis tests revealed a high degradation efficacy (NPX 100%, SMX 76-95%, MTF 57-75%) and challenged the belief that OH• is the predominant reactive oxygen species (ROS). The primary ROS were 1O2 for NPX and OH• for SMX and MTF. The raw greywater (NPX, SMX, MTF - 0.5 mg·L-1) treatment in MBR removed only 17-22% of the pharmaceuticals, highlighting the need for post-treatment. Using this pretreated greywater, P25 layers excelled for NPX (78 ± 5%) and SMX (73 ± 4%) but were less effective for MTF (40 ± 16%) compared to Anatase 16 (60 ± 10%). Moreover, the effluent toxicity (Aliivibrio fischeri) was reduced, and the degradation products were identified. Overall, TiO2 layers are a high-potential method for removing pharmaceuticals from MBR-treated greywater.

Preparation and Photovoltaic Performance of a Composite TiO2 Nanotube Array/Polyaniline UV Photodetector

TiO2 has great potential for application in UV photodetectors due to its excellent photoelectric response. In this work, composite nanomaterials of TiO2 nanotube arrays (TiO2 NTAs) and polyaniline (PANI) were successfully prepared on titanium sheets using an anodic oxidation electrochemical method. The results showed that the TiO2 NTA/PANI composite materials had excellent UV photosensitivity and responsiveness and good stability and reproducibility. This was mainly attributed to the p-n heterostructure formed inside the TiO2 NTA/PANI composites that hindered the recombination of photogenerated electron-hole pairs and improved their utilization of UV light. This work provides a theoretical basis for the application of metal oxides in UV photodetectors, which is important for the development of UV photodetectors.

Photocatalytic performance of PANI modified TiO2: Degradation of refractory organic matter

Surface modification of TiO2 with polyaniline (PANI) conducting polymer has been used to achieve visible light photoresponse, thereby increasing solar photocatalytic activity. In this study, photocatalytic performances of PANI-TiO2 composites with different mole ratios were synthesized by the in situ chemical oxidation polymerization method and tested for the degradation of a model refractory organic matter (RfOM), namely humic acid in an aqueous medium under simulated solar irradiation in a comparative manner. Adsorptive interactions under dark conditions and interactions under irradiation were investigated as contributing factors to photocatalysis. Degradation of RfOM was monitored in terms of UV-vis parameters (Color436, UV365, UV280, and UV254) and fluorescence spectroscopic parameters as well as the mineralization extent by dissolved organic carbon contents. The presence of PANI exerted an enhancement in photocatalytic degradation efficiency compared to pristine TiO2. The synergistic effect was more pronounced in lower PANI ratios whereas higher PANI ratios reflected a retardation effect. Degradation kinetics were assessed by pseudo-first-order kinetic model. For all UV-vis parameters analyzed, highest and lowest rate constants (k) were attained in the presence of PT-14 (2.093 × 10-2 to 2.750 × 10-2 min-1) and PT-81 (5.47 × 10-3 to 8.52 × 10-3 min-1), respectively. Variations in selected absorbance quotients, i.e., A254/A436, A280/A436, and A253/A203, were distinctive and compared with respect to irradiation time and photocatalyst type. Upon use of PT-14, a steady decreasing profile with respect to irradiation time was attained for A253/A203 quotient as 0.76-0.61, followed by a rapid decrease to 0.19 in 120 min. The incorporation effect of PANI into TiO2 composite could be visualized in A280/A365 and A254/A365 quotients exhibiting an almost constant and parallel trend. As a general trend, decrease in the major fluorophoric intensity FIsyn,470 with photocatalysis was observed under extended irradiation conditions; however, an abrupt decline was remarkable in the presence of PT-14 and PT-18. Fluorescence intensity decrease correlated well with spectroscopic evaluation of rate constants. A thorough evaluation of spectroscopic parameters of UV-vis and fluorescence can provide significant information for practical applications in control of RfOM in water treatment.

Efficient non-metal based conducting polymers for photocatalytic hydrogen production: comparative study between polyaniline, polypyrrole and PEDOT

Incorporation of conducting polymers (CPs) with TiO2 is considered a promising pathway toward the fabrication of highly efficient non-metal based photocatalysts. Herein, we report the fabrication of TiO2@polyaniline, TiO2@polypyrrole, and TiO2@poly(3,4-ethylenedioxythiophene) photocatalyst heterostructures via the facile wet incipient impregnation method. The mass ratios of CPs in the composites were optimized. The structure, morphology, optical and surface texture of the samples were characterized by XRD, TEM, TGA, DRS, and N2-physisorption techniques. The TiO2@2PEDOT, TiO2@2PPy, and TiO2@5PAn composites were found to exhibit the highest H2 evolution rate (HER) of 1.37, 2.09, and 3.1 mmol h-1 g-1, respectively. Compared to bare TiO2, the HER was significantly enhanced by 16, 24, and 36-fold, respectively. Photoelectrochemical measurements (CV, CA and EIS) were conducted, to evaluate the photoelectric properties of the synthesized composites and assist in understanding the photocatalytic mechanism. The deposition method plays a key-role in forming the photocatalyst/CP interface. This simple impregnation route was found to provide an excellent interface for charge transfer between composite components compared to chemisorption and in situ polymerization methods. This study sheds light on the promising effect of CP incorporation with semiconductor photocatalysts, as a cheap and efficient matrix, on photocatalytic performance.

Development of photocatalytic paint based on TiO2 and photopolymer resin for the degradation of organic pollutants in water

While the use of TiO2 nanoparticles in the form of slurry/suspension requires energy-intensive separation processes, its immobilization in solid support may open new opportunities in the area of sustainable water treatment technologies. In this study, a novel method for the development of photocatalytic paint based on TiO₂ nanoparticles and acrylate-based photopolymer resin is reported. The paint (TiO₂@polymer) was applied on substrates such as plastic petri dish and glass jar, which was polymerized/solidified by ultraviolet light irradiation. The painted petri dish and glass jar were used for the photocatalytic degradation of model organic pollutants viz. methyl orange (MO), methylene blue (MB), and indole in deionized water, simulated fresh drinking water, and tap water matrices. The photocatalytic degradation studies were performed under sunlight and UV-B light were used for. The sunlight-assisted photocatalytic degradation of MO and MB was found to be faster and more efficient than the UV-B light-assisted ones. Under UV-B light irradiation, it took 120 min to degrade about 80% of 6 ppm MB solution, whereas under sunlight irradiation it took 60 min to degrade about 90% of the same MB solution. The photocatalytic paint generated hydroxyl radical (·OH) under the UV-B and sunlight irradiation, which was studied by the terephthalic acid fluorescence tests. Further, the potential release of TiO₂ during the exposure to UV irradiation was studied by single particle ICP-MS analysis.

A One-Step Approach to the Synthesis of High Aspect Ratio Titania Nanoflakes

High aspect ratio TiO2 nanoflakes are synthesized by a one-step modified surface hydrolysis method. Surface morphology and physical dimensions are characterized using scanning electron microscopy, laser diffraction analysis, and transmission electron microscopy. Microsized flakes having a thickness ≈40 nm are successfully synthesized by spreading an oil phase consisting of titanium tetraisopropoxide and a low surface tension hydrocarbon on the surface of water. Pure anatase phase crystalline titania nanoflakes are obtained by calcining at 400 °C without changing the shape and thickness of flakes. Relatively higher specific surface area (2-6 times) and less crystal defects enhance photocatalytic activities of nanoflakes due to more surface reaction sites and the suppression of fast recombination. By performing dye degradation under ultraviolet illumination, titania nanoflakes exhibit the higher photocatalytic efficiency over the commercial photocatalyst, Degussa P25. As far as it is known, this method is the most efficient and cost effective process for making low-dimensional nanomaterials in a continuous manner. These titania flakes can be easily separated from the treated water by simply sedimentation or filtration and therefore is very suitable for water purification application.