Charge transfer induced unexpected red-shift absorption of Zn and Cu porous coordination polymers based on electron-withdrawing ligand

Yelamaggad C. Affordable Two-Dimensional Layered Cd(II) Coordination Polymer: High-Performance Pseudocapacitor Electrode Behavior

In recent years, pseudocapacitive materials have been investigated rigorously as they provide a unique pathway for realizing high-energy and high-power densities. However, innovative approaches involving rational design and synthesis of new materials are still vital to address concerns such as degradation, low conductivity, low cycling performance, high resistance, production cost, etc. Working in this direction, we report the cost-effective synthesis, characterization, and excellent pseudocapacitive behavior of a Cd(II)-based coordination polymer (COP) abbreviated as Cd(DAB). It has been realized in quantitative yield through a facile one-pot reaction occurring among the N4-ligand, 3,3'-diaminobenzidine (DAB), and Cd(II) ions, derived from Cd(OAc)2·2H2O, at room temperature. The proposed structure of the COP was ascertained by subjecting it to various standard spectroscopic and electron microscopic studies; these techniques reveal the self-assembly of indefinitely long coordination strands into a two-dimensional (2D) layered structure. The electrochemical performance of Cd(DAB) was evaluated as an electrode material for supercapacitors. Owing to its high conductivity, it portrayed remarkable energy storage (pseudocapacitor) behavior; it exhibited a high specific capacitance of 1341.6 F g-1 and a long cycle life with 81% retention over 10,000 cycles at 20 A g-1. Additionally, an asymmetrical supercapacitor device was fabricated, which exhibited a specific capacitance of 428.5 F g-1 at a current density of 1 A g-1.

Boosting the Performance of Diketopyrrolopyrrole-Triphenylamine-Based Organic Solar Cells via π-Linker Engineering

The design and development of novel and efficient donor-π-acceptor (D-π-A) type conjugated systems has attracted substantial interest in the field of organic electronics owing to their intriguing properties. In this paper, we have designed seven new and efficient D-π-A type conjugated systems (M1-M7) by a variety of π-linkers with triphenylamine (TPA) as the electron donor and diphenyldiketopyrrolopyrrole (DPP) as the electron acceptor using density functional theory (DFT) formalism for organic solar cells (OSCs). The π-linker has been substituted between the donor and acceptor for efficient electron transfer. Here, our primary focus is on narrowing the highest occupied molecular orbital-lowest unoccupied molecular orbital gaps, electronic transition, charge transfer rate, reorganization energies, and the theoretical power conversion efficiencies (PCEs). Our study reveals that the designed compounds exhibit excellent charge transfer rates. The absorption properties of the compounds have been examined using the time-dependent density functional theory (TD-DFT) method. The TD-DFT study shows that compound M2 possesses the highest absorption maxima with a maximum bathochromic shift. For a better understanding of the electron transport process of our designed compounds, we have designed donor/acceptor (D/A) blends, and each of the developed blends (FREA/M1-M7) can encourage charge carrier separation. According to the photovoltaic performance of the D/A blends, compound FREA-M2, which has a theoretical PCE of 16.53%, is the most appealing choice for use in OSCs. We expect that by thoroughly examining the relationship between structure, characteristics, and performance, this work will serve as a roadmap for future research and development of TPA-DPP-based photovoltaic materials.

A Pyridine Diketopyrrolopyrrole-Grafted Graphene Oxide Nanocomposite for the Sensitive Detection of Chloramphenicol by a Direct Electrochemical Method

A novel direct electrochemical sensor, based on a pyridine diketopyrrolopyrrole/graphene oxide nanocomposite-modified glass carbon electrode (PDPP/GO/GCE), was developed herein for chloramphenicol (CAP) detection. In this research, PDPP was grafted onto GO by C-N bonds and π-π conjugation, which were synergistically confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The morphology study shows that PDPP was uniformly dispersed on the GO in the form of particles. The constructed PDPP/GO/GCE showed the strongest response signal to CAP in the evaluation of electrocatalytic activity by cyclic voltammetry compared to that of GO-modified and unmodified GCE, revealing that the introduction of PDPP can effectively improve the electrocatalytic activity of sensors. Moreover, PDPP/GO/GCE had a noticeable current signal when the concentration of CAP was as low as 0.001 uM and had a wide line range (0.01-780 uM) with a low limit of detection (1.64 nM). The sensor properties of the as-obtained PDPP/GO/GCE involved anti-interference, reproducibility, and stability, which were also evaluated and revealed satisfactory results.

Sensitive detection of 4-nitrophenol based on pyridine diketopyrrolopyrrole-functionalized graphene oxide direct electrochemical sensor

For highly sensitive detection of 4-nitrophenol (4-NP) in the environment, a novel pyridine diketopyrrolopyrrole-functionalized graphene oxide (PDPP-GO) composite was constructed for the first time by an improved Hummers' method. Herein, PDPP was completely dissolved in sulfuric acid (6 mol L^-1) and reacted with GO, promoting PDPP evenly adhering to the GO surface. Moreover, the specific surface area increased from 15.51 to 22.033 m² g^-1. Infrared spectroscopy and X-ray photoelectron spectroscopy simultaneously demonstrated that PDPP was bound to GO by the strong intermolecular hydrogen bonding and π-π stacking conjugation. During the cyclic voltammetry test, the PDPP-GO coated glassy carbon electrode (PDPP-GO/GCE) direct electrochemical sensor gave expression to the best electrocatalytic activity for 4-nitrophenol detection than GO/GCE and bare GCE. Under optimization conditions, the as-prepared PDPP-GO/GCE sensor brought out remarkable sensitivities of 18.54 (0.5-50 μM) and 6.61 μA μM^-1 cm^-2 (50-163 μM) in the linear detection of 4-NP. Besides, a low detection limit of 0.10 μM, reliable long-term stability, excellent selectivity, and reproducibility were obtained. In the real sample test, the PDPP-GO/GCE demonstrated sensitive and reliable determination.

Unpaired Electron-Induced Wide-Range Light Absorption within Zn (or Cu) MOFs Containing Electron-Withdrawing Ligands: A Theoretical and Experimental Study

In photocatalysis, it is of general interest to understand and design wide-range light-absorbing inorganic/organic hybrid materials with an excellent photo-induced intramolecular charge-transfer (ICT) effect. To verify the role of unpaired electrons in enhancing ICT within electron-withdrawing ligand-based metal-organic frameworks (MOFs), the molecular structure, density of states (DOS), and electronic structure of strong electron-deficient pyridine-diketopyrrolopyrrole (P-DPP)-based Zn (or Cu) MOFs were calculated in Gaussian package to validate the unpaired electron ICT. The electron spin resonance technique has detected the unpaired electrons for the coordination systems containing Zn-O or Cu-O clusters and P-DPP ligand on photoexcitation. The estimated band gaps from the DOS calculation for P-DPP-Cu and P-DPP-Zn are 1.4 and 2.4 eV, respectively, showing a good agreement with the experimental UV-vis optical spectra. The partial DOS, dipole moment, and frontier orbital analysis prove that the ICT should happen from Zn-O or Cu-O clusters to P-DPP ligands. This research may contribute to a comprehensive understanding of electron-withdrawing ligand-induced ICT within MOFs and shed light on the design of light-absorbing MOFs with excellent ICT or conductivity.

Pyridine-Diketopyrrolopyrrole-Based Novel Metal-Free Visible-Light Organophotoredox Catalyst for Atom-Transfer Radical Polymerization

In the field of electronics, organocatalysts are in high demand for use in the synthesis of clean polymers using solar radiation rather than potentially contaminating metals. Combining theoretical design, simulation, and experiments, this work presents a novel, pyridine-diketopyrrolopyrrole (P-DPP)-based metal-free visible-light organophotoredox catalyst (P-DPP). It is effective in the photocontrolled organocatalytic atom-transfer radical polymerization (O-ATRP) of methyl methacrylate (MMA) and styrene. The use of this catalyst and white light-emitting diode (LED) irradiation produces polymers with a cross-linked feature. In O-ATRP, the P-DPP catalyst has an oxidative quenching catalytic mechanism with an excited-state reductive potential of -1.8 V, fluorescence lifetime of 7.5 ns, and radical-cation oxidative potential of 0.45 V. Through molecular simulation, we found that the adjacent pyridine group is key to reducing the alkyl halide initiator and generating radicals, while the diketopyrrolopyrrole core stabilizes the triplet state of the catalyst through intramolecular charge transfer. The findings related to this novel photoredox catalyst will aid in the search for much more effective organophotoredox catalysts for use in controlled radical polymerization. They will also be of value in the fields of polymer chemistry and physics and in various applications.