BiOCl/Fe2O3 heterojunction nanoplates with enhanced visible-light-driven photocatalytic performance for degrading organic pollutants and reducing Cr(VI)

A facile synthesis of K3PMo12O40/WO3 crystals for effective sonocatalytic performance

Proper treatment of hazardous contaminants in the air, land, and water is crucial to environmental remediation. Sonocatalysis, by using ultrasound and suitable catalysts, has shown its potential in organic pollutant removal. In this work, K₃PMo₁₂O₄₀/WO₃ sonocatalysts were fabricated via a facile solution method at room temperature. Techniques such as powder X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy, and X-ray photoelectron spectroscopy were used to characterize the structure and morphology of the products. By using the K₃PMo₁₂O₄₀/WO₃ sonocatalyst, an ultrasound-assisted advanced oxidation process has been developed for the catalytic degradation of methyl orange and acid red 88. Almost all dyes were degraded within 120 min of ultrasound baths, proving that the K₃PMo₁₂O₄₀/WO₃ sonocatalyst has the advantage of speeding up the decomposition of contaminants. The impacts of key parameters, including catalyst dosage, dye concentration, dye pH, and ultrasonic power were evaluated to understand and reach optimized conditions in sonocatalysis. The remarkable performance of K₃PMo₁₂O₄₀/WO₃ in the sonocatalytic degradation of pollutants provides a new strategy for the application of K₃PMo₁₂O₄₀ in sonocatalysis.

Ultrathin High-Quality SnTe Nanoplates for Fabricating Flexible Near-Infrared Photodetectors

This work demonstrates a controlled van der Waals growth of two-dimensional SnTe nanoplates on mica substrates and their applications in flexible near-infrared photodetectors. The growth of nonlayered rock-salt structured SnTe crystals into two-dimensional SnTe nanoplate structures is mainly caused by the two-dimensional nature of the mica surface, which also results in the ultrathin nanoplates obtained (3.6 nm, equivalent to 6 monolayers). Furthermore, it is found that the shape of the SnTe nanoplates can be well engineered by changing their growth temperature due to the competition between the surface energy of the {100} crystallographic plane and that of the {111} plane. As a result of the favorable physical properties of topological crystalline insulators such as metallic surface (high electron mobility) and narrow bandgap, near-infrared photodetectors based on single SnTe nanoplate with the thickness of 3.6 nm present excellent device performance with a responsivity of 698 mA/W, a specific detectivity of 3.89 × 10⁸ jones, and an external quantum efficiency of 88.5% under the illumination of a 980 nm laser at room temperature (300 K) without applying a gate voltage (V_g). Upon increasing the gate voltage from -30 to 30 V, the detector responsivity increases from 2.96 to 723 mA/W and the detector detectivity increases from 2.4 × 10⁶ to 5.3 × 10⁸ jones. Furthermore, upon increasing the thickness of SnTe nanoplate from 3.6 to 35 nm, the detector responsivity increases from 0.698 to 1.468 A/W. The device performance measured after bending for 300 times as well as after bending with different radii presents no obvious degradation, which exhibits the excellent flexibility of the SnTe nanoplate detectors. These results not only contribute to a deep understanding of the mechanisms of the van der Waals growth of nonlayered materials into two-dimensional structure but also demonstrate the immense potential of SnTe nanoplates to be used in flexible near-infrared detectors.

BiOCl/WS2 hybrid nanosheet (2D/2D) heterojunctions for visible-light-driven photocatalytic degradation of organic/inorganic water pollutants

This report presents the superior visible-light-driven photocatalytic response of novel 2D/2D BiOCl/WS₂ (BW _X ) hybrid nanosheet heterojunctions prepared by a simple solution based sonochemical technique. These BW _X hybrid nanosheets are composed of 2D transition metal dichalcogenide material WS₂ and BiOCl nanosheets. The comparative study of photocatalytic activity of BiOCl and BiOCl/WS₂ hybrid nanosheets is carried out via photodegradation of Malachite Green (MG) and photoreduction of heavy metal ion Cr(vi) under visible light irradiation. The quantum efficiency of the samples is estimated in terms of the incident photon to electron conversion efficiency (IPCE) measurements. Nearly 98.4% of the MG degradation was achieved over BiOCl/WS₂ (2%) photocatalyst in 45 min of irradiation. BiOCl/WS₂ (2%) hybrid nanosheet catalyst showed the highest external quantum efficiency (EQE) in both the UV and visible regimes. This accomplishment demonstrated the promise of commercial application of the 2D/2D BiOCl/WS₂ (2%) hybrid nanosheet photocatalyst.