Electrochemical deposition synthesis of ZnO-NA/Cu2O-NPs type-II hierarchical heterojunction for enhanced photoelectrochemical degradation of methyl orange (MO)

Highly Efficient Photocatalytic Degradation of Organic Pollutants Using a Polyvinylidene Fluoride/Polyvinylpyrrolidone-Cuprous Oxide Composite Membrane

Enhancing the efficiency of photocatalysts in the removal of organic pollutants is of vital importance in wastewater treatment. In this work, a set of composite membranes that can be used for efficient removal of the organic dyes, such as methyl orange (MO), methylene blue (MB), and Congo red (CR), were prepared through coblending/electrospinning techniques using polyvinylidene fluoride (PVDF) as the substrate, polyvinylpyrrolidone (PVP) as the dispersing agent and wettability regulator, and cuprous oxide (Cu2O) as the photocatalyst. The results showed that Cu2O particles were well encapsulated in the electrospun PVDF/PVP fibers, and the composite membranes exhibited apparently enhanced hydrophilicity. Furthermore, compared with the pure Cu2O particles, the composite membranes not only showed a higher photocatalytic degradation ratio for MO (93.6%) but also showed a much higher degradation rate (62.4 mg/(mg·h)) in comparison with the other reported Cu2O-based composite photocatalytic materials in the literature. In addition, the membrane sample also had excellent recycling stability, and the retention rate of its removal ability maintained 92.1% after 5 times of recycling. Furthermore, the composite membranes also showed high removal ability toward MB and CR, with photocatalytic degradation ratios of 81.4 and 76.1%, respectively. This work indicates that the prepared PVDF/PVP-Cu2O composite membranes possess promising application prospects in wastewater treatment.

Study of TiO2/Ti4O7 photo-anodes inserted in an activated carbon packed bed cathode: Towards the development of 3D-type photo-electro-Fenton reactors for water treatment

In this work, commercially available Polymethyl-meta-acrylate (PMMA) spectroscopy cells were modified on the external walls with films of TiO₂, Ti₄O₇ or TiO₂/Ti₄O₇ mixtures. Film characterization was carried out using SEM and UV–vis spectroscopy. The results of photocatalytic (PC), electro-oxidation (EO), and photoelectrochemical (PEC) experiments on the decolorization of a methyl orange (MO) model dye solution showed that while anatase provides better photocatalytic properties and the partially reduced Ti₄O₇ larger electronic conductivity, the TiO₂/Ti₄O₇ composite film behaves as a semiconductor substrate that combines the advantages of both materials (for PEC experiments for instance, decolorization values for the model dye solution using TiO₂, Ti₄O₇ and a TiO₂/Ti₄O₇ mixed film, corresponded to 35%, 46% and 53%, respectively). In order to test this film as an effective photoanode material in a 3-D type reactor for water treatment processes, a TiO₂/Ti₄O₇ modified PMMA spectroscopy cell was inserted in an activated carbon (AC) bed so that the semiconductor material could be illuminated using an external UV source positioned inside the PMMA cell. The connected AC particles that were previously saturated with MO dye were used as cathode sites for the oxygen reduction reaction so that the photoelectrochemical reactions that take place in the anode could be complemented with coupled electro-Fenton processes in the cathode. As expected, the combination resulted in an effective decolorization of the dye solution that results from a complex combination of processes. The experimental decolorization data was successfully fitted to a pseudo-first order kinetic model so that a deeper understanding of the contribution of each process in the reactor could be obtained.