Facile synthesis of Ag3PO4/g-C3N4 composites in various solvent systems with tuned morphologies and their efficient photocatalytic activity for multi-dye degradation

Facile Synthesis of Oxygen-Doped g-C3N4 Mesoporous Nanosheets for Significant Enhancement of Photocatalytic Hydrogen Evolution Performance

In this work, oxygen-doped g-C3N4 mesoporous nanosheets (O-CNS) were synthesized via a facile recrystallization method with the assistance of H2O2. The crystal phase, chemical composition, morphological structure, optical property, electronic structure and electrochemical property of the prepared O-CNS samples were well investigated. The morphological observation combined with the nitrogen adsorption-desorption results demonstrated that the prepared O-CNS samples possessed nanosheet-like morphology with a porous structure. Doping O into g-C3N4 resulted in the augmentation of the specific surface area, which could provide more active sites for photocatalytic reactions. Simultaneously, the visible light absorption capacity of O-CNS samples was boosted owing to the regulation of O doping. The built energy level induced by the O doping could accelerate the migration rate of photoinduced carriers, and the porous structure was most likely to speed up the release of hydrogen during the photocatalytic hydrogen process. Resultantly, the photocatalytic hydrogen production rate of the optimized oxygen-doped g-C3N4 nanosheets reached up to 2012.9 μmol·h-1·g-1, which was 13.4 times higher than that of bulk g-C3N4. Thus, the significantly improved photocatalytic behavior was imputed to the synergistic effect of the porous structure, the increase in active sites, and the enhancement of visible light absorption and charge separation efficiency. Our research highlights that the synergistic effect caused by element doping will make a great contribution to the remarkable improvement in photocatalytic activity, providing a new inspiration for the construction of novel catalysts.

Sunlight promoted self-fenton photodegradation and pathway of doxycycline: Interactive effects of nanomaterial on bean plant and its genotoxicity against Allium cepa

Photocatalytic induction of electron/hole recombination, surface property and light response ability effectively enhance the photocatalytic activity of nanomaterial. In this work, the effective charge carrier separating Sn/Mn-ZnFe₂O₄-CdFe₂O₄-Ag₃PO₄ Quantum dots (M/SZFO-CFO-AP QDs) was fabricated for photocatalytic degradation of doxycycline (doxy) antibiotic. The result showed enhanced photocatalytic activity of doxy and the degradation efficiency of doxy was about 98.8% in short span of time. The calculated WH plot and urbach energy of prepared photocatalyst exhibited evidence for the prevalence of point defects and its contribution to efficient charge separation and transferability. The total organic carbon (TOC) removal was found to be 98.9%, which depicts the complete mineralization of doxy. The synergetic charge transfer of n-p-n heterojunction enables the effective removal of doxy under visible light irradiation. Further, the genotoxicity study was determined by interacting the SZFO-CFO-AP QDs with Allium Cepa. The results depict that SZFO-CFO-AP QDs show lower toxicity level and there were no trace of defective mitotic phases and micro nuclei. Further, the progression and development of bean plant was determined after treating with prepared nanomaterials and the result showed the enhanced growth in SZFO-CFO-AP QDs treated bean plant compared to the counterparts. Therefore, the prepared SZFO-CFO-AP QDs was can be used as an environmental friendly photocatalyst for effective treatment of antibiotic present in the water bodies.

The Construction of Phosphorus-Doped g-C3N4/Rh-Doped SrTiO3 with Type-II Band Alignment for Efficient Photocatalytic Hydrogen Evolution

It is of great importance to promote charge separation in photocatalysts for enhanced photocatalytic activity under visible light irradiation. In this work, a type-II heterostructured photocatalyst was constructed by compositing phosphorus-doped g-C₃N₄ (P-CN) and Rh-doped SrTiO₃ (Rh-STO) via a thermal calcination treatment. A series of characterizations were conducted to investigate the structure of heterostructured P-CN/Rh-STO. It was found that Rh-STO interacted with in situ generated P atoms from the decomposition of P-CN during the calcination process, thus leading to the formation of heterojunction of P-CN/Rh-STO. Compared with the single component, i.e., P-CN or Rh-STO, the obtained P-CN/Rh-STO showed superior photocatalytic activity to that of both P-CN and Rh-STO due to the effective charge separation across the heterojunction between P-CN and Rh-STO.

Recent advances and perspectives of g-C3N4-based materials for photocatalytic dyes degradation

Photocatalytic degradation technology is regarded as a promising technology for dye-contained wastewater treatment due to its superior efficiency and recycling. The key to the implementation of photocatalytic degradation technology is the selection of sunlight-active photocatalyst. Graphitic carbon nitride (g-C₃N₄) photocatalyst has been put into a lot of research in the field of organic pollutant degradation because of its low cost, suitable electronic structure and high chemical stability. In this perspective review, we comprehensively discuss the recent advance of photocatalytic dyes degradation over g-C₃N₄-based materials. The properties, structure and preparation methods of g-C₃N₄ are briefly introduced. Furthermore, the progress in improving the degradation efficiency of g-C₃N₄-based photocatalyst is highlighted in the article. The possible pathways and different active species for dyes decomposition are also summarized. We expect this review can provide instructive application of g-C₃N₄-based catalysts for environmental remediation.

Sub-level engineering strategy of nitrogen-induced Bi2O3/g-C3N4: a versatile photocatalyst for oxidation and reduction

Herein, the α-Bi₂O₃ nanocrystal decorated by nitrogen dopant and its heterojunction nanocomposite with g-C₃N₄ (N_0.1/Bi₂O₃/g-C₃N₄) is successfully fabricated for the first time, for photo-oxidation of RhB and photo-reduction of Cr(VI) to Cr(III). The resulting N_0.1/Bi₂O₃/g-C₃N₄ (3%) nanocomposite showed an optimal Cr(VI) photo-reduction and RhB photo-oxidation rates under visible-light irradiation, being 3-4 times higher than that of pure α-Bi₂O₃. The results from XPS confirmed the substitution of nitrogen with various oxidation states from N³⁺ to N^x+ (x < 5), due to the existence of different nitrogen oxides including N-O, O-N=O, and NO₃^- in the crystal structure. We investigated the reaction mechanism using catalytic tests, impedance spectroscopy, EPR technique, and density functional calculations. The DFT calculations presented the appearance of a new mid-gap hybrid of p states, comprised of N 2p, O 2p, and Bi 6P states, which enhance light absorption capacity and narrow band gap. The theoretical results were in excellent agreement with experimental UV-Vis data. The N_0.1/Bi₂O₃/g-C₃N₄ nanocomposite exhibited acceptable practical application value and recycling ability for removal of the contaminants. Such improved photocatalytic activity is originated from the modified band positions, new electron evolution pathway, introducing defects in α-Bi₂O₃ by insertion of N atoms into the Bi sites, and the enhanced charge carrier mobility between N_0.1/Bi₂O₃ and g-C₃N₄. The strategy to form nitrogen-doped bismuth-based nanocomposites may open a new opportunity to design atomic-level electronic defects by feasible methods to obtain a versatile photocatalyst material with simultaneous photo-reduction and photo-oxidation ability for removal of Cr(VI) and organic dyes from water.

Recent progress in g-C3N4, TiO2 and ZnO based photocatalysts for dye degradation: Strategies to improve photocatalytic activity

Water contamination by dyes is a matter of concern for human health and the environment. Various methods (membrane separation, coagulation and adsorption) have been explored to remove/degrade dyes. However, now the exploitation of semiconductor assisted materials using renewable solar energy has emerged as a potential candidate to resolve the issue. Although, single component photocatalysts (ZnO, TiO₂, ZrO₂) were experimented, due to their low efficiency and stability due to the high recombination rate electron-hole pair and inefficient visible light absorption, composites of semiconductor materials are being used. Semiconductor heterojunction systems are developed by coupling two or more semiconductor components. The synergistic effect of their properties, such as adsorption and improved charge carrier migration, is observed to increase overall stability. This review covers recent progress in advanced nanocomposite materials based on g-C₃N₄, TiO₂ and ZnO used as photocatalysts with details of enhancing the photocatalytic properties by heterojunctions, crystallinity and doping. The conclusion at the end displays a summary, research gaps and future outlook. A holistic analysis of recent progress to demonstrate the efficient heterojunctions for photodegradation with optimal conditions, this review will be helpful for the development of efficient heterostructured systems for photodegradation. This review covers references from the year 2017-2020.

Preparation of CuSe-PDA/g-C3N4 and its visible-light photocatalytic performance to dye degradation

CuSe as an excellent photocatalytic semiconductor material has wildly used in the field of photocatalysis. In this paper, CuSe-PDA/g-C₃N₄ was designed and synthesized, and the photocatalytic performance of CuSe was further enhanced by the addition of polydopamine (PDA) and graphite phase carbon nitride (g-C₃N₄). The as-prepared CuSe-PDA/g-C₃N₄ was characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR), and elemental mapping. The specific surface area and porous characteristics of the material were also studied by N₂ adsorption-desorption isotherm, which the specific surface area were 186.6 m²/g and pore size were of 3.1 nm by BET data analysis. The photocatalytic conditions for the degradation of methylene blue (MB) by CuSe-PDA/g-C₃N₄ were optimized in the experiment. The results showed that the photocatalytic performance of CuSe-PDA/g-C₃N₄ under visible-light illumination were better than CuSe and PDA owing to the narrow band gap energy and delayed electron-hole recombination. Under the optimized conditions, the removal rate reach to 99% of 50 mg/L MB within 60 min irradiation time. Moreover, the MB removal rate was over 90% through six repeated experiments, which proved that the CuSe-PDA/g-C₃N₄ composite nanomaterials have good stability and reusability.

Fabricating acid-sensitive controlled PAA@Ag/AgCl/CN photocatalyst with reversible photocatalytic activity transformation

Achieving the intelligent controllability of the photocatalyst to the surrounding environment is a very meaningful work. Here, the polyacrylic acid (PAA) modified Ag/AgCl-40/CN composite was constructed to achieve an intelligent response of pH value. PAA exhibits hydrophilic properties at high pH value, increasing the adsorption capacity to tetracycline (TC) molecules. The morphology of PAA from contracted state to diastolic state, releasing the Ag/AgCl-40/CN catalyst. In addition, PAA modified Ag/AgCl-40/CN can prevent the loss of AgCl. The g-C₃N₄ nanosheets (CN) as a carrier enhance the dispersibility of the AgCl particles. The LSPR effects of Ag nanoparticles produce more electrons acting on photocatalytic degradation. On the results of experiment, the degradation of TC by PAA@Ag/AgCl-40/CN shows an excellent degradation activity when the high pH value. Photoluminescence spectroscopy and photocurrent demonstrate that carrier separation efficiency of PAA@Ag/AgCl-40/CN is higher than CN and Ag/AgCl-40/CN. The detection of the main active substances •O₂^- and h⁺, revealing a reasonable mechanism for the PAA@Ag/AgCl-40/CN hybrid system. This work provides a procedure to obtain smart materials that can switch photocatalytic processes.

Superior decontamination of toxic organic pollutants under solar light by reduced graphene oxide incorporated tetrapods-like Ag3PO4/MnFe2O4 hierarchical composites

To fabricate an efficient, eco-friendly and stable photocatalyst, the current work describes a demonstration of simple synthesis approach of Ag₃PO₄/MnFe₂O₄(x wt%)/reduced graphene oxide composites. Ag₃PO₄/MnFe₂O₄ (5 wt%) revealed superior activity for decontamination of dye pollutant. Further, rGO was incorporated with Ag₃PO₄/MnFe₂O₄ (5 wt%) to investigate its effect on their overall properties. The resultant composites were characterized by various analytical techniques to confirm their structural and physical-chemical features. FESEM analysis showed that morphology of Ag₃PO₄ varied significantly from orthorhombic dodecahedrons to tripods and tetrapods with the combinations MnFe₂O₄ (5 wt%), and MnFe₂O₄ (5 wt%)+rGO respectively. The photocatalytic decontamination of toxic organic dyes tested against Rhodamine B(RhB) and 4-Nitrophenol. The outstanding performance for decontamination of RhB was observed for Ag₃PO₄/MnFe₂O₄(5 wt%)/rGO (~99% in 5 min) with the rate of k = 7.28 × 10^-1 min^-1. The enhanced activity of Ag₃PO₄/MnFe₂O₄(5 wt%)/rGO composites credited to co-catalytic effects of MnFe₂O₄ and physiochemical properties of rGO which leads to making intimate contact with Ag₃PO₄ to form heterojunction and rGO served as a medium for charge transfer to prevent their recombination. The incorporation of rGO in Ag₃PO₄/MnFe₂O₄ (5 wt%) composite leads to a considerable increase in the photocatalytic activity by offering improved surface area and properties, high electron stability and mobility. Based on experiment results, the photocatalytic enhancement mechanism for organic pollutants degradation was discussed. The recyclability of Ag₃PO₄/MnFe₂O₄(5 wt%)/rGO hierarchical composite was evaluated by replicated photocatalytic reaction trials. Overall, the morphological transformation of Ag₃PO₄/MnFe₂O₄(5 wt%)/rGO composites played a dynamic role in determining their photocatalytic activity towards the organic industrial dye pollutants.

Magnetic BiFeO3 decorated UiO-66 as a p–n heterojunction photocatalyst for simultaneous degradation of a binary mixture of anionic and cationic dyes

Magnetic UiO-66/BiFeO₃ composite for simultaneous photodegradation of a binary mixture of anionic and cationic dyes.

Facile synthesis of Fe2O3 nanoparticles from Egyptian insecticide cans for efficient photocatalytic degradation of methylene blue and crystal violet dyes

In this study, Fe₂O₃ (hematite) nanoparticles with different crystallite sizes (40-59 nm) were synthesized from Egyptian insecticide cans using the combustion method. The organic fuels were urea, glycine, L-alanine, and L-valine. Fe₂O₃ nanoparticles were characterized utilizing different devices such as BET, PL, FT-IR, XRD, HR-TEM, FE-SEM, UV-Vis, and DTG. Crystal violet (CV) and methylene blue (MB) dyes were efficiently removed from aqueous solution by photocatalytic degradation under UV irradiation in the presence of Fe₂O₃ and H₂O₂. The % degradation of 50 mL crystal violet or methylene blue dye (20 mg/L) using 0.1 g Fe₂O₃ in the presence of H₂O₂ was 100% after 30 or 40 min, respectively. Also, the degradation processes are fitted well with the first order model. Besides, the photocatalytic activity of Fe₂O₃ unaltered even after it was reused three times. Hence, the synthesized Fe₂O₃ nanoparticles can be considered a promising and efficient photocatalyst for the degradation of crystal violet and methylene blue dyes.

Efficient decontamination of toxic phenol pollutant using LaCO3OH nanowires decorated Ag3PO4 hierarchical composites mediated by metallic Ag

With the aim to develop an eco-friendly, efficient and stable photocatalyst, the present work reports the synthesis of Ag₃PO₄/LaCO₃OH (AP/LC) heterojunction photocatalysts. Different weight ratios of AP/(x wt% LC) were tested to find the best composition for superior photocatalytic activity for dye pollutant degradation. AP/LC (20 wt%) revealed a superior photocatalytic activity. Hence it was selected for further analyses. Furthermore, we investigated the influence of distilled water: tetrahydrofuran (DW:TF) solvent system on the morphology as well as photocatalytic activities of AP/LC (20%) heterojunction. FESEM analysis shows that the morphology of AP/LC heterojunctions varied significantly with TF:DW ratio. Sphere-shaped like nanoparticles of LC transformed into nanowires to make intimate contact with AP polyhedras. The increase of TF with respect to DW results increase in the width of wire-like dimension of LC causes loose intimate contact within AP/LC heterojunction. The photocatalytic performance of AP/LC heterojunctions were tested against degradation of toxic phenol contaminant, and the outstanding photocatalytic activity was noticed for the AP/LC-2 photocatalyst (~99% degradation in 120 min) with a rate constant, k of 1.281 × 10^-2 min^-1. The improved photocatalytic performance can be attributed to the uniform decoration of LC nanowires on the AP microstructure which leads to intimate interface within the heterojunction and effective charge separation. The recyclability of the AP/LC-2 photocatalysts was evaluated via replicated photocatalytic reaction trials.