Methylammonium iodo bismuthate perovskite (CH3NH3)3Bi2I9 as new effective visible light-responsive photocatalyst for degradation of environment pollutants

Efficient Homojunction/Heterojunction Photocatalyst via Integrating CsPbBr3 Quantum Dot Homojunction with TiO2 for Degradation of Organic Dyes

A novel TiO2-CsPbBr3(Q) photocatalyst is proposed and rationally constructed, where CsPbBr3 perovskite quantum dots (QDs) of various sizes inside mesopore TiO2 (M-TiO2) are integrated. These perovskite QDs, generated in situ within M-TiO2, establish a type-II homojunction. Interestingly, a Z-scheme heterojunction is simultaneously formed at the interface between CsPbBr3 and TiO2. Due to the coexistence of the type-II homojunction and the Z-scheme heterojunction, photogenerated electrons are effectively transferred from TiO2 to CsPbBr3, thereby suppressing carrier recombination and thus enhancing the degradation of rhodamine B (RhB). Compared with pure CsPbBr3 and TiO2, TiO2-CsPbBr3(Q) shows significantly enhanced photocatalytic performance for RhB degradation. The degradation efficiency of RhB in the presence of the TiO2-CsPbBr3(Q) attains 97.7% in 5 min under light illumination, representing the highest efficiency observed among photocatalysts based on TiO2. This study will facilitate the development of superior semiconductor catalysts for photocatalytic applications.

Syntheses, structures, photoelectric properties and photocatalysis of iodobismuthate hybrids with lanthanide complex cations

New iodobismuthate hybrids with lanthanide complex counter cations, [Ln(DMF)₈][Bi₂I₉] (Ln = La (1), Eu (2)) and [Tb(DMF)₈]₂[Bi₂I₉]₂ (3) (DMF = N,N-dimethylformamide), were prepared using solvated Ln(III) complexes formed in situ as structure-directing agents. The dimeric [Bi₂I₉]^3- anion moieties of compounds 1-3 are aggregated by two slightly twisted BiI₆ octahedra through face-sharing mode. The different crystal structures of 1-3 are due to the different I⋯I and C-H⋯I hydrogen bond interactions. Compounds 1-3 have narrow semiconducting band gaps at 2.23, 1.91 and 1.94 eV, respectively. Under Xe light irradiation, they exhibit steady photocurrent densities that are 1.81, 2.10 and 2.18 times higher than that of pure BiI₃, respectively. Compounds 2 and 3 exhibited higher catalytic activities than 1 in the photodegradation of organic dyes CV and RhB, which are attributed to the stronger photocurrent response derived from the redox cycles of Eu³⁺/Eu²⁺ and Tb⁴⁺/Tb³⁺.

Recent developments in lead-free bismuth-based halide perovskite nanomaterials for heterogeneous photocatalysis under visible light

Halide perovskite materials, especially lead-based perovskites, have been widely used for optoelectronic and catalytic applications. However, the high toxicity of the lead element is a major concern that directs the research work toward lead-free halide perovskites, which could utilize bismuth as a promising candidate. Until now, the replacement of lead by bismuth in perovskites has been well studied by designing bismuth-based halide perovskite (BHP) nanomaterials with versatile physical-chemical properties, which are emerging in various application fields, especially heterogeneous photocatalysis. In this mini-review, we present a brief overview of recent progress in BHP nanomaterials for photocatalysis under visible light. The synthesis and physical-chemical properties of BHP nanomaterials have been comprehensively summarized, including zero-dimensional, two-dimensional nanostructures and hetero-architectures. Later, we introduce the photocatalytic applications of these novel BHP nanomaterials with visible-light response, improved charge separation/transport and unique catalytic sites. Due to advanced nano-morphologies, a well-designed electronic structure and an engineered surface chemical micro-environment, BHP nanomaterials demonstrate enhanced photocatalytic performance for hydrogen generation, CO₂ reduction, organic synthesis and pollutant removal. Finally, the challenges and future research directions of BHP nanomaterials for photocatalysis are discussed.

Mechanochemical Synthesis of Lead-Free Perovskite-Like MA3 Bi2 I9 for Photo-Catalytic Hydrogen Production

In this study, a highly air stable and eco-friendly methyl ammonium bismuth iodide (MA₃ Bi₂ I₉ ) perovskite-like material has been prepared. After physiochemical characterizations, the synthesized MA₃ Bi₂ I₉ was utilized as photo-catalyst towards hydrogen production. It is important to design and synthesize lead (Pb)-free perovskite-like material (MA₃ Bi₂ I₉ ) for photo-catalytic hydrogen-production applications. The synthesized MA₃ Bi₂ I₉ exhibits excellent photo-catalytic hydrogen generation with a production rate of 11.43 μmolg^-1  h^-1 . In the presence of a platinum co-catalyst, the hydrogen production rate further increases to 172.44 μmolg^-1  h^-1 . The MA₃ Bi₂ I₉ photo-catalyst also demonstrates excellent cyclic stability.

Synthesis and Characterization of Fe Doped Aurivillius-Phase PbBi2Nb2O9 Perovskite and Their Photocatalytic Activity on the Degradation of Methylene Blue

A simple solid-state reaction was applied to synthesize Fe-doped perovskite-type PBFNO catalysts, and methylene blue decomposition studies were performed in the form of visible light according to the changes in the Fe doping content (0.4 to 1.9 mol ratio compared with Bi mol) and the amount of catalyst used (0.05 to 0.2 g used). As the Fe doping content increases, the absorbance and bang gap energy of the PBFNOs sample rapidly increase and decrease, respectively, because the Fe dopant in the PBNO lattice acts as an intermediate band between the valence and conduction bands of the PBNO and reduces the band gap energy. As a result, it showed a performance degradation of approximately 42% compared to the maximum performance. In addition, the presence of Fe dopants in the PBNO lattice greatly reduces the intensity of the photoluminescent lines. This is because the Fe dopant can play an important role in light-induced electron transfer and as a hole trap, reducing the recombination rate. Additionally, when too much photocatalyst was used (>0.1 g used), the Fe dopant played an important role as a light-induced electron transfer and hole trap, reducing the recombination rate and lowering the overall photocatalytic activity by 51%. In particular, 0.1 g of PBNO-0.2-F showed continuous catalytic activity, even when the photocatalytic reaction proceeded for 180 min. Therefore, this study demonstrates that the Fe-doped aurivillius-phase PBFNO photocatalyst is very promising for the dye manufacturing industry.

Research progresses on the application of perovskite in adsorption and photocatalytic removal of water pollutants

The problem of global water pollution and scarcity of water resources is becoming increasingly serious. Multifunctional perovskites can well drive adsorption and photocatalytic reactions to remove water pollutants. There are many advantages of perovskites, such as abundant oxygen vacancies, easily tunable structural morphology, stable crystal state, highly active metal sites, and a wide photo response range. However, there are few reviews on the simultaneous application of perovskite to adsorption and photocatalytic removal of water pollutants. Thus, this paper discusses the preparation methods of perovskite, the factors affecting the adsorption of water environmental pollutants by perovskite, and the factors affecting perovskite photocatalytic water pollutants. The particle size, specific surface area, oxygen vacancies, electron-hole trapping agents, potentials of the valence band, and conduction band in perovskites are significant influencing factors for adsorption and photocatalysis. Strategies for improving the performance of perovskites in the fields of adsorption and photocatalysis are discussed. The adsorption behaviors and catalytic mechanisms are also investigated, including adsorption kinetics and thermodynamics, electrostatic interaction, ion exchange, chemical bonding, and photocatalytic mechanism. It summarizes the removal of water pollutants by using perovskites. It provides the design of perovskites as high-efficiency adsorbents and catalysts for developing new technologies.

Halides and oxyhalides-based photocatalysts for abatement of organic water contaminants - An overview

Recently, halides (silver halides, AgX; perosvkite halides, ABX₃) and oxyhalides (bismuth oxyhalides, BiOX) based nanomaterials are noticeable photocatalysts in the degradation of organic water pollutants. Therefore, we review the recent reports to explore improvement strategies adopted in AgX, ABX₃ and BiOX (X = Cl, Br and I)-based photocatalysts in water pollution remediation. Herein, the photocatalytic degradation performances of each type of these photocatalysts were discussed. Strategies such as tailoring the morphology, crystallographic facet exposure, surface area, band structure, and creation of surface defects to improve photocatalytic activities of pure halides and BiOCl photocatalysts are emphasized. Other strategies like metal ion and/or non-metal doping and construction of composites, adopted in these photocatalysts were also reviewed. Furthermore, the way of production of active radicals by these photocatalysts under ultraviolet/visible light source is highlighted. The deciding factors such as structure of pollutant, light sources and other parameters on the photocatalytic performances of these materials were also explored. Based on this literature survey, the need of further research on AgX, ABX₃ and BiOX-based photocatalysts were suggested. This review might be beneficial for researchers who are working in halides and oxyhalides-based photocatalysis for water treatment.

Two-Step Synthesis of Bismuth-Based Hybrid Halide Perovskite Thin-Films

Lead halide perovskites have been revolutionary in the last decade in many optoelectronic sectors. Their bismuth-based counterparts have been considered a good alternative thanks to their composition of earth-abundant elements, good chemical stability, and low toxicity. Moreover, their electronic structure is in a quasi-zero-dimensional (0D) configuration, and they have recently been explored for use beyond optoelectronics. A significant limitation in applying thin-film technology is represented by the difficulty of synthesizing compact layers with easily scalable methods. Here, the engineering of a two-step synthesis in an air of methylammonium bismuth iodide compact thin films is reported. The critical steps of the process have been highlighted so that the procedure can be adapted to different substrates and application areas.

Sunlight-Driven AO7 Degradation with Perovskites (La,Ba)(Fe,Ti)O3 as Heterogeneous Photocatalysts

Perovskites of the (La,Ba)(Fe,Ti)O3 family were prepared, characterized, and utilized as heterogeneous photocatalysts, activated by natural sunlight, for environmental remediation of Acid Orange 7 (AO7) aqueous solutions. Catalysts were prepared by the ceramic (CM) and the complex polymerization (CP) methods and characterized by XRD, SEM, EDS, and band gap energy. It was found that catalytic properties depend on the synthesis method and annealing conditions. In the photocatalytic assays with sunlight, different AO7 initial concentrations and perovskite amounts were tested. During photocatalytic assays, AO7 and degradation products concentrations were followed by HPLC. Only photocatalysis with BaFeO3-CM and BaTiO3-CP presented AO7 removals higher than that observed for photolysis. However, photolysis leads to the formation of almost exclusively amino-naphthol and sulfanilic acid, whereas some of the perovskites utilized form less-toxic compounds as degradation products, such as carboxylic acids (CA). Partial substitution of Ba by La in BaTiO3-CM does not produce any change in the photocatalytic properties, but the replacement of Ti by Fe in the La0.1Ba0.9TiO3 leads to reduced AO7 removal rate, but with the formation of CAs. The best AO7 removal (92%) was obtained with BaFeO3-CM (750 mg L-1), after 4 h of photocatalytic degradation with solar radiation.

Recent Progress in Engineering Metal Halide Perovskites for Efficient Visible-Light-Driven Photocatalysis

Artificial photosynthesis has attracted increasing attention due to recent environmental and energy concerns. Metal halide perovskites (MHPs) demonstrating excellent optoelectronic properties have currently emerged as novel and efficient photocatalytic materials. Herein, the structural features of MHPs that are responsible for the photoinduced charge separation and charge migration properties are briefly introduced, and then important and necessary photophysical and photochemical aspects of MHPs related to photoredox catalysis are summarized. Subsequently, the applications of MHPs for solar energy harvesting and photocatalytic conversion, including H₂ evolution, CO₂ reduction, degradation of organic pollutants, and photoredox organic synthesis, are extensively demonstrated, with a focus on strategies for improving the performance (e.g., selectivity, activity, stability, recyclability, and environmental compatibility) of these MHP-based photocatalytic systems. To conclude, existing challenges and prospects on the future development of MHP-based materials towards photoredox catalysis applications are detailed.

Photosensitive Hybrid Nanostructured Materials: The Big Challenges for Sunlight Capture

Solar radiation is becoming increasingly appreciated because of its influence on living matter and the feasibility of its application for a variety of purposes. It is an available and everlasting natural source of energy, rapidly gaining ground as a supplement and alternative to the nonrenewable energy feedstock. Actually, an increasing interest is involved in the development of efficient materials as the core of photocatalytic and photothermal processes, allowing solar energy harvesting and conversion for many technological applications, including hydrogen production, CO2 reduction, pollutants degradation, as well as organic syntheses. Particularly, photosensitive nanostructured hybrid materials synthesized coupling inorganic semiconductors with organic compounds, and polymers or carbon-based materials are attracting ever-growing research attention since their peculiar properties overcome several limitations of photocatalytic semiconductors through different approaches, including dye or charge transfer complex sensitization and heterostructures formation. The aim of this review was to describe the most promising recent advances in the field of hybrid nanostructured materials for sunlight capture and solar energy exploitation by photocatalytic processes. Beside diverse materials based on metal oxide semiconductors, emerging photoactive systems, such as metal-organic frameworks (MOFs) and hybrid perovskites, were discussed. Finally, future research opportunities and challenges associated with the design and development of highly efficient and cost-effective photosensitive nanomaterials for technological claims were outlined.