LaNi Fe1-O3 (0 ≤ x ≤1) as photothermal catalysts for hydrocarbon fuels production from CO2 and H2O

Preparation and Application of a Novel S-Scheme Nanoheterojunction Photocatalyst (LaNi0.6Fe0.4O3/g-C3N4)

Rapid recombination of photogenerated electrons and holes affects the performance of a semiconductor device and limits the efficiency of photocatalytic water splitting for hydrogen production. The use of an S-scheme nanoscale heterojunction catalyst for the separation of photogenerated charge carriers is a feasible approach to achieve high-efficiency photocatalytic hydrogen evolution. Therefore, we synthesized a three-dimensional S-scheme nanoscale heterojunction catalyst (LaNi0.6Fe0.4O3/g-C3N4) and investigated its activity in photocatalytic water splitting. An analysis of the band structure (XPS, UPS, and Mott-Schottky) indicated effective interfacial charge transfer in an S-scheme nanoscale heterojunction composed of two n-type semiconductors. X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR) spectroscopy confirmed that the light-induced charge transfer followed the S-scheme mechanism. Based on the capture test (EPR) of •OH free radicals, it can be seen that the enhanced activity is attributed to the S-scheme carrier migration mechanism in heterojunction, which promotes the rapid adsorption of H+ by the abundant amino sites in g-C3N4, thus effectively generating H2. The 2D/2D LaNi0.6Fe0.4O3/g-C3N4 heterojunction has a good interface and produces a built-in electric field, improving the separation of e- and h+ while increasing the oxygen vacancy. The synergistic effect of the heterostructure and oxygen vacancy makes the photocatalyst significantly better than LaNi0.6Fe0.4O3 and g-C3N4 in visible light. The hydrogen evolution rate of the composite catalyst (LaNi0.6Fe0.4O3/g-C3N4-70 wt %) was 34.50 mmol·h-1·g-1, which was 40.6 times and 9.2 times higher than that of the catalysts (LaNiO3 and g-C3N4), respectively. After 25 h of cyclic testing, the catalyst (LaNi0.6Fe0.4O3/g-C3N4-70 wt %) composite material still exhibited excellent hydrogen evolution performance and photostability. It was confirmed that the synergistic effect between abundant active sites, enriched oxygen vacancies, and 2D/2D heterojunctions improved the photoinduced carrier separation and the light absorption efficiency of visible light. This study opens up new possibilities for the logical design of efficient photodecomposition using 2D/2D heterojunctions combined with oxygen vacancies.

Fabrication of Heterostructural FeNi3-Loaded Perovskite Catalysts by Rapid Plasma for Highly Efficient Photothermal Reverse Water Gas Shift Reaction

Metal-semiconductor heterostructured catalysts have attracted great attention because of their unique interfacial characteristics and superior catalytic performance. Exsolution of nanoparticles is one of the effective and simple ways for in-situ growth of metal nanoparticles embedded in oxide surfaces and their favorable dispersion and stability. However, both high-temperature and a reducing atmosphere are required simultaneously in conventional exsolution, which is time-consuming and costly, and particles often agglomerate during the process. In this work, Ca0.9Ti0.8Ni0.1Fe0.1O3-δ (CTNF) is exposed to dielectric blocking discharge (DBD) plasma at room temperature to fabricate alloying FeNi3 nanoparticles from CTNF perovskite. FeNi3-CTNF has outstanding catalytic activity for photothermal reverse water gas shift reaction (RWGS). At 350 °C under full-spectrum irradiation, the carbon monoxide (CO) yield of FeNi3-CTNF (10.78 mmol g-1 h-1) is 11 times that of pure CaTiO3(CTO), and the CO selectivity is 98.9%. This superior catalytic activity is attributed to the narrow band gap, photogenerated electron migration to alloy particles, and abundant surface oxygen vacancies. The carbene pathway reaction is also investigated through in-situ Raman spectroscopy. The present work presents a straightforward method for the exsolution of nanoalloys in metal-semiconductor heterostructures for photothermal CO2 reduction.

A motif for B/O-site modulation in LaFeO3 towards boosted oxygen evolution

Here, a series of transition metal (Ni) doped iron-based perovskite oxides LaFe1-xNixO3-δ (x = 0, 0.25, 0.5, 0.75, 1) were prepared, and then the perovskite oxide with the optimized nickel-iron ratio was doped with non-metallic elements (N). Experimental and theoretical investigations reveal that the co-doping breaks the traditional linear constraint relationship (GOOH - GOH = 3.2 eV) and the theoretical overvoltage is reduced from 0.64 V (LaFeO3-δ) to 0.44 V (LaFe0.5Ni0.5O3-δ/N). Specifically, Ni-doping can accelerate electron transfer and improve the conductivity. Moreover, N-doping can reduce the adsorption energy of *OH/*O and enhance the adsorption energy of *OOH. We demonstrated that the optimized cation and anion co-doped LaFe0.5Ni0.5O3-δ/N perovskite oxide exhibits an excellent OER performance, with a low overpotential of 270.6 mV at 10 mA cm-2 and a small Tafel slope of 65 mV dec-1 in 1 M KOH solution, markedly exceeding that of the parent perovskite oxide LaFeO3-δ (300.9 mV) and commercial IrO2 (289.1 mV). It also delivers decent durability with no significant degradation after a 35 h stability test. This work reveals the internal mechanism of perovskite oxide by doping cation and anion for water oxidation, which broadens the idea for the rational design of new perovskite-based sustainable energy catalysts.

Transient Absorption Spectrum Analysis for Photothermal Catalysis Perovskite Materials

To gain insight into photocatalytic behavior, transient absorption spectroscopy (TAS) was used to study LaCoxMn1−xO3, LaMnxNi1−xO3 and LaNixCo1−xO3 (x = 0, 0.2, 0.4, 0.6, 0.8 and 1.0) on a microsecond time scale. The results show that the electron lifetime is key to determining the photocatalytic reduction of CO2. This is the first time that the photogenerated electron lifetime in perovskite has been proposed to express the performance of the photocatalytic reduction of CO2 with H2O into CH4. In all cases, the decay curve can be well explained by two consecutive first-order kinetics, indicating that the electron exists within two major populations: one with a short lifetime and the other one with a long lifetime. The long-lived electrons are the rate-limiting species for the photocatalytic reaction and are related to the activity of the photocatalytic reduction of CO2 with H2O to produce CH4. For different photocatalysts, we find that the longer the electron decay lifetime is, the stronger the electron de-trapping ability is, and the electrons perform more activity. In this paper, TAS can not only detect the micro-dynamics process of carriers, but it is also demonstrated to be an easy and effective method for screening the most active catalyst in various catalysts for the photocatalytic reduction of CO2 with H2O accurately and quickly.

Efficient Visible-Light-Driven Tetracycline Degradation and Cr(VI) Reduction over a LaNi1-xFexO3 (0 ≤ x ≤ 1)/g-C3N4 Type-II Heterojunction Photocatalyst

The development of efficient, stable, and visible-light-responsive photocatalysts is crucial to address the pollution of water bodies by toxic heavy metal ions and organic antibiotics. Herein, a series of LaNi_1-xFe_xO₃/g-C₃N₄ heterojunction photocatalysts are prepared by a simple wet chemical method. Moreover, LaNi_0.8Fe_0.2O₃/g-C₃N₄ composites are characterized by various methods, including structure, morphology, optical, and electrochemical methods and tetracycline degradation and photocatalytic reduction of Cr(VI) under visible light irradiation. Then, the photocatalytic performance of as-prepared LaNi_0.8Fe_0.2O₃/g-C₃N₄ composites is evaluated. Compared with pure LaNi_0.8Fe_0.2O₃ and g-C₃N₄, the LaNi_0.8Fe_0.2O₃/g-C₃N₄ composite photocatalysts exhibit excellent photocatalytic performance due to synergy of doping and constructing heterojunctions. The results show that the doping of Fe ions can increase the concentration of oxygen vacancies, which is ultimately beneficial to the formation of electron traps. Moreover, the type-II heterojunction formed between LaNi_0.8Fe_0.2O₃ and g-C₃N₄ effectively strengthens the separation and transfer of photoinduced carriers, thereby promoting photocatalytic activity. Furthermore, the photocatalytic activity of the LaNi_0.8Fe_0.2O₃/g-C₃N₄ photocatalyst remains almost unchanged after three cycles, indicating long-term stability. Ultimately, the photocatalytic mechanism of the LaNi_0.8Fe_0.2O₃/g-C₃N₄ composites is proposed.

Solar-light-driven LaFe x Ni1- x O3 perovskite oxides for photocatalytic Fenton-like reaction to degrade organic pollutants

LaFe _x Ni_{1- x} O₃ perovskite oxides were prepared by the sol-gel method under various conditions, including different pH values (pH 0 and pH 7) and different calcination temperatures (500-800 °C) as well as different Fe/Ni ratios (1/9, 3/7, 5/5, 7/3, 9/1). The samples were examined by XRD, DRS, BET, and SEM to reveal their crystallinity, light-absorption ability, specific surface area, and surface features, respectively. The photocatalytic Fenton reaction was conducted using various LaFe _x Ni_{1- x} O₃ perovskite oxides to decompose the methylene blue molecules. Accordingly, the synthesis condition of pH 0, calcination temperature at 700 °C, and Fe/Ni ratio = 7/3 could form LaFe_0.7Ni_0.3O₃ perovskite oxides as highly efficient photocatalysts. Moreover, various conditions during the photocatalytic degradation were verified, such as pH value, catalyst dosage, and the additional amount of H₂O₂. LaFe_0.7Ni_0.3O₃ perovskite oxides could operate efficiently under pH 3.5, catalyst dosage of 50 mg/150 mL, and H₂O₂ concentration of 133 ppm to decompose the MB dye in the 1st order kinetic rate constant of 0.0506 s^-1.

Direct Conversion of CO2 into Hydrocarbon Solar Fuels by a Synergistic Photothermal Catalysis

Photothermal coupling catalysis technology has been widely studied in recent years and may be a promising method for CO2 reduction. Photothermal coupling catalysis can improve chemical reaction rates and realize the controllability of reaction pathways and products, even in a relatively moderate reaction condition. It has inestimable value in the current energy and global environmental crisis. This review describes the application of photothermal catalysis in CO2 reduction from different aspects. Firstly, the definition and advantages of photothermal catalysis are briefly described. Then, different photothermal catalytic reductions of CO2 products and catalysts are introduced. Finally, several strategies to improve the activity of photothermal catalytic reduction of CO2 are described and we present our views on the future development and challenges of photothermal coupling. Ultimately, the purpose of this review is to bring more researchers’ attention to this promising technology and promote this technology in solar fuels and chemicals production, to realize the value of the technology and provide a better path for its development.

Cation and Anion Co-doped Perovskite Nanofibers for Highly Efficient Electrocatalytic Oxygen Evolution

Perovskite oxides have been recognized as one of the most attractive oxygen evolution reaction (OER) catalysts because of their low cost, earth abundance, and robust nature. Herein, one-dimensional porous LaFe_1-xNi_xO₃ (LFNO) perovskite oxide nanofibers (LFNO NFs) are fabricated with a feasible electrospinning route and its further post-calcination treatment. By tailoring the atomic percent of Fe and Ni in the perovskite oxide, we determined that LaFe_0.25Ni_0.75O₃ (LFNO-III) NFs afford the best OER activity among all the prepared perovskite oxides. Especially remarkable is that the further selenide-doped LaFe_0.25Ni_0.75O₃ (LFNOSe-III) NFs exhibit outstanding OER activity with a low overpotential of 287 mV at 10 mA cm^-2 and a small Tafel slope of 87 mV dec^-1 in 1 M KOH solution, markedly exceeding that of the parent perovskite oxide and the commercial RuO₂. It also delivers decent durability with no significant degradation after 22 h of stability test. In the meanwhile, density functional theory calculations are also conducted to justify the optimized adsorption features of *OH, *O, and *OOH intermediates and unveil that the electrocatalytic active sites are the Ni atoms adjacent to Fe in the Ni- and Se codoped perovskite. This work provides an effective method for the development of highly efficient perovskite oxide catalysts.