Boosted visible-light photocatalytic performance of TiO2-x decorated by BiOI and AgBr nanoparticles

Recent progress in defect-engineered metal oxides for photocatalytic environmental remediation

Rapid industrial advancement over the last few decades has led to an alarming increase in pollution levels in the ecosystem. Among the primary pollutants, harmful organic dyes and pharmaceutical drugs are directly released by industries into the water bodies which serves as a major cause of environmental deterioration. This warns of a severe need to find some sustainable strategies to overcome these increasing levels of water pollution and eliminate the pollutants before being exposed to the environment. Photocatalysis is a well-established strategy in the field of pollutant degradation and various metal oxides have been proven to exhibit excellent physicochemical properties which makes them a potential candidate for environmental remediation. Further, with the aim of rapid industrialization of photocatalytic pollutant degradation technology, constant efforts have been made to increase the photocatalytic activity of various metal oxides. One such strategy is the introduction of defects into the lattice of the parent catalyst through doping or vacancy which plays a major role in enhancing the catalytic activity and achieving excellent degradation rates. This review provides a comprehensive analysis of defects and their role in altering the photocatalytic activity of the material. Various defect-rich metal oxides like binary oxides, perovskite oxides, and spinel oxides have been summarized for their application in pollutant degradation. Finally, a summary of existing research, followed by the existing challenges along with the potential countermeasures has been provided to pave a path for the future studies and industrialization of this promising field.

Spent Coffee Grounds Derived Carbon Loading C, N Doped TiO2 for Photocatalytic Degradation of Organic Dyes

Titanium dioxide (TiO₂) is an ideal photocatalyst candidate due to its high activity, low toxicity and cost, and high chemical stability. However, its practical application in photocatalysis is seriously hindered by the wide band gap energy of TiO₂ and the prone recombination of electron-hole pairs. In this study, C, N doped TiO₂ were supported on spent coffee grounds-derived carbon (ACG) via in situ formation, which was denoted as C, N-TiO₂@ACG. The obtained C, N-TiO₂@ACG exhibits increased light absorption efficiency with the band gap energy decreasing from 3.31 eV of TiO₂ to 2.34 eV, a higher specific surface area of 145.8 m²/g, and reduced recombination rates attributed to the synergistic effect of a spent coffee grounds-derived carbon substrate and C, N doping. Consequently, the optimal 1:1 C, N-TiO₂@ACG delivers considerable photocatalytic activity with degradation efficiencies for methylene blue (MB) reaching 96.9% within 45 min, as well as a high reaction rate of 0.06348 min^-1, approximately 4.66 times that of TiO₂ (0.01361 min^-1). Furthermore, it also demonstrated greatly enhanced photocatalytic efficiency towards methyl orange (MO) in the presence of MB compared with a single MO solution. This work provides a feasible and universal strategy of synchronous introducing nonmetal doping and biomass-derived carbon substrates to promote the photocatalytic performance of TiO₂ for the degradation of organic dyes.

Synthesis and Visible Light Catalytic Performance of BiOI/Carbon Nanofibers Heterojunction

Semiconductor materials as photocatalysts hold great prospects for renewable energy substitutes and environmental protection. Nanostructured BiOX (X=Cl, Br, I) with favorable features of a unique layered crystal structure and suitable band gaps has been demonstrated to be a promising photocatalytic material. In this paper, a two-step synthesis route combining an electrospinning technique and SILAR reaction has been accepted as a straightforward protocol for the exploitation of BiOI/carbon nanofibers’ (CNFs) hierarchical heterostructures. As expected, the BiOI/CNFs presented a much higher degradation rate of methyl orange than that of the pure BiOI under visible light. The degradation rate of methyl orange reaches 85% within 210 min. The enhanced photocatalytic activity could be attributed to the fact that conductive CNFs as substrate could effectively improve the separation and transformation of photogenerated charges. Moreover, the fabricated BiOI/CNFs after five cycles could be easily recycled without a decrease in photocatalytic activity due to their ultra-long one-dimensional nano-structural property.

Improvement of Photocatalytic Performance by Building Multiple Heterojunction Structures of Anatase-Rutile/BiOI Composite Fibers

In this study, multiple heterojunction structures of anatase-rutile/Bismuth oxyiodide (BiOI) composite fibers are designed by the combined method of electrospinning and hydrothermal techniques. The influence of different Ti/Bi atomic ratios ([Ti/Bi]) on the nanostructures and photocatalytic properties are investigated. It is found that the morphology of BiOI covered on the TiO₂ fiber surface changed with [Ti/Bi] from nanosheets to submicron spheres structures. Additionally, the crystallization of the composite fibers including the phases of anatase, rutile, and BiOI is identified, theses phases are in close contact with each other, and the interfacial effects are helpful to form the multiple heterojunctions which lead to blue shifts on the chemical state of Ti. The absorption of visible light has been improved by compositing BiOI on TiO₂, while the band gap values of the composite fibers are significantly reduced, which can enhance the generation and separation of electrons and holes. For the case of [Ti/Bi] = 1.57, the photodegradation rate of anatase-rutile/BiOI composite fibers is about 12 times that of pure TiO₂. For the photocatalytic mechanism, the synergistic s-type heterojunctions increase the content of active oxides which have a positive effect on the degradation rate.

Enhanced photocatalytic performance of visible-light-driven CuOx/TiO2-x for degradation of gaseous formaldehyde: Roles of oxygen vacancies and nano copper oxides

Photocatalysis is an effective method for the removal of formaldehyde (HCHO), and high-efficiency visible-light-driven photocatalysts were urgently required. Herein, oxygen vacancies (OVs) and nano copper oxides (CuO_x) synergistically modified TiO₂ (CuO_x/TiO_2-x) photocatalysts were synthesized by one-step hydrothermal followed by impregnation method. The photocatalytic decomposition of HCHO reached 100% at initial concentration of 180 ppm under relative humidity (RH) = 60% by 0.1g CuO_x/TiO_2-x in 150 min visible light irradiation. Characterization results explored the complementary effect of OVs and CuO_x systematically. The OVs increased the separation efficiency of photogenerated charge carriers and act as adsorption/active sites in HCHO photocatalytic oxidation. The moisture and O₂ were adsorbed and actived by OVs to generate reactive oxygen species (ROS). After doped CuO_x on the surface of TiO_2-x, the photoexcited electrons in Cu₂O could transfer to the conduction band (CB) of TiO_2-x and the photoexcited electrons of TiO_2-x could be captured by Cu nanoparticles. Therefore, more ROS were generated due to the synergistic effect of OVs and CuO_x. The In-situ Fourier transform infrared (in-situ FTIR) measurements show the hydroxyl radical (•OH) was the dominant radical in HCHO photocatalytic oxidation, while •O₂^- could also upgrade the photodegradation efficiency of HCHO. Furthermore, the stability tests showed the degradation efficiency of HCHO still reached 90% after five recycles, indicating that CuO_x/TiO_2-x nanocomposites displayed a stable and high photoactivity in volatile organic compounds (VOCs) decomposition.

A novel 0D/2D WS2/BiOBr heterostructure with rich oxygen vacancies for enhanced broad-spectrum photocatalytic performance

In this study, a novel 0D/2D WS₂/BiOBr heterostructured photocatalyst with rich oxygen vacancies was fabricated by a hydrothermal method. The WS₂ QDs/BiOBr-10 heterostructures exhibited a maximum removal rate of 92% towards ciprofloxacin (CIP) within 100 min under visible-light irradiation, which was 2.63- and 2.02- folds higher activity than that of pristine BiOBr and WS₂ QDs/BiOBr-10 with poor oxygen vacancies, respectively. In addition, the removal efficiencies of this photocatalyst towards various pollutants were 99% (Lanasol Red 5B), 95% (Rhodamine B), 85% (metronidazole), 96% (tetracycline) and 41% (Bisphenol A), respectively. Besides, the simultaneous photocatalytic degradation showed the competitive interactions between these organic contaminants for the active species, decreasing the removal efficiency for CIP. However, the simultaneous photocatalytic oxidation of CIP and reduction of Cr(VI) improved the utilization efficiency of photo-induced electrons and holes, resulting in high removal efficiencies for both CIP and Cr(VI). Three-dimensional excitation-emission matrix fluorescence spectra (3D EEMs) were used to investigate the degradation of CIP molecules. The synergistic effect of heterostructure and oxygen vacancies greatly assisted in the removal of organic pollutants, attributing to the enhanced visible-light harvesting and effective separation of photo-induced electron-hole pairs. Furthermore, trapping experiments and ESR results demonstrated that the CIP removal was dominated by the direct oxidation of holes (h⁺), whereas the hydroxyl radicals (OH) and superoxide radicals (O₂^-) acted as auxiliary active species. This study provides a new way to rationally design and construct active 0D/2D pattern heterojunction photocatalysts for environmental remediation.

Graphene-based plasmonic nanocomposites for highly enhanced solar-driven photocatalytic activities

High-efficiency photocatalysts are crucial for the removal of organic pollutants and environmental sustainability. In the present work, we report on a new low-temperature hydrothermal chemical method, assisted by ultrasonication, to synthesize disruptive plasmonic ZnO/graphene/Ag/AgI nanocomposites for solar-driven photocatalysis. The plasmonic nanocomposites were investigated by a wide range of characterization techniques, confirming successful formation of photocatalysts with excellent degradation efficiency. Using Congo red as a model dye molecule, our experimental results demonstrated a photocatalytic reactivity exceeding 90% efficiency after one hour simulated solar irradiation. The significantly enhanced degradation efficiency is attributed to improved electronic properties of the nanocomposites by hybridization of the graphene and to the addition of Ag/AgI which generates a strong surface plasmon resonance effect in the metallic silver further improving the photocatalytic activity and stability under solar irradiation. Scavenger experiments suggest that superoxide and hydroxyl radicals are responsible for the photodegradation of Congo red. Our findings are important for the fundamental understanding of the photocatalytic mechanism of ZnO/graphene/Ag/AgI nanocomposites and can lead to further development of novel efficient photocatalyst materials.

High-efficiency of plasmonic ZnO/graphene/Ag/AgI nanocomposites for solar-driven photocatalysis activities.