Three-dimensional flower heterojunction g-C3N4/Ag/ZnO composed of ultrathin nanosheets with enhanced photocatalytic performance

Synergistic effect of ZnO/Ag2O@g-C3N4 based nanocomposites embedded in carrageenan matrix for dye degradation in water

This research achieved success by synthesizing innovative nanocomposite composed of zinc oxide (ZnO), graphitic carbon nitride (g-C3N4) and silver oxide (Ag2O) nanomaterials incorporated into a carrageenan matrix, thus creating an environmentally friendly and stable support structure. The synthesis process involved hydrothermal and chemical precipitation methods to create photocatalytic g-C3N4, ZnO, and Ag2O nanocomposites. The success is evident through the characterization results, which unveiled distinctive peaks corresponding to Zn-O (590-404 cm-1) and Ag-O (2072 cm-1) stretching in the Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analyses, conclusively confirming the successful synthesis of g-C3N4, ZnO, Ag2O, and their respective nanocomposites. Further validation through a scanning electron microscope coupled with an energy dispersive spectrometer (SEM-EDX) and elemental mapping affirmed the presence of Zn, O, Ag, C, and N. Additionally, transmission electron microscope (TEM) imaging unveiled the nanosheet morphology of g-C3N4, the nanorod structure of ZnO, and the spherical form of Ag2O nanomaterials. ZnO and Ag2O nanomaterials demonstrated a consistent 10-20 nm size range. To underscore their ability to harness visible light, the nanomaterials were excited at 380 nm, emitting visible light emission within the 400-450 nm range. The synthesized nanocomposites showcased outstanding adsorption and photocatalytic properties, achieving efficiency ranging from 80 % to 98 %, attributed to the synergistic interactions between the various components. These findings culminate in a confirmation of the research's success, validating the exceptional potential of these nanocomposites for various applications.

Preparation of heterojunction C3N4/WO3 photocatalyst for degradation of microplastics in water

In this study, a WO₃/g-C₃N₄ composite photocatalyst was synthesized via a hydrothermal method and characterized for its potential application in photocatalytic H2 generation from PET degradation. XRD analysis revealed that the hexagonal WO₃ crystal structure was achieved after 10 h of hydrothermal time, with particles of suitable size for uniform loading on the g-C₃N₄ surface. SEM images showed the successful loading of WO₃ nanorods onto the g-C3N4 surface, significantly increasing the specific surface area. FTIR and UV-vis diffuse reflectance spectroscopy confirmed the formation of a Z-type heterojunction between WO₃ and g-C₃N₄. Photoluminescence measurements indicated a reduced rate of electron-hole pair recombination in the composite. The 30% WO₃/g-C₃N₄ composite demonstrated a high H₂ evolution rate of 14.21 mM and excellent stability in PET solution under visible light irradiation. 1H NMR and EPR spectroscopy analyses revealed the degradation of PET into small molecular compounds and the generation of active radicals, including ·O₂^-, during the reaction. Overall, the WO₃/g-C₃N₄ composite exhibited promising potential for photocatalytic H₂ production and PET degradation.

Engineering interface structures for heterojunction photocatalysts

Solar photocatalysis is the most ideal solution to global energy concerns and environmental deterioration nowadays. The heterojunction combination has become one of the most successful and effective strategies to design and manufacture composite photocatalysts. Heterojunction structures are widely documented to markedly improve the photocatalytic behavior of materials by enhancing the separation and transfer of photogenerated charges, widening the light absorption range, and broadening redox potentials, which are attributed to the presence of both build-in electric fields at the interface of two different materials and the complementarity between different electron structures. So far, a large number of heterojunction photocatalytic materials have been reported and applied for water splitting, reduction of carbon dioxide and nitrogen, environmental cleaning, etc. This review outlines the recent accomplishments in the design and modification of interface structures in heterojunction photocatalysts, aiming to provide some useful perspectives for future research in this field.

Development of Z-scheme bimetallic tungstate-supported nitrogen deficient g-C3N4 heterojunction for the treatment of refractory pharmaceutical pollutants

The binary BMT/ND-GCN-based heterostructure photocatalyst for pharmaceutical industry wastewater treatment.

Recent Advances in g-C3 N4 -Based Photocatalysts for Pollutant Degradation and Bacterial Disinfection: Design Strategies, Mechanisms, and Applications

Emerging photocatalytic technology promises to provide an effective solution to the global energy crisis and environmental pollution. Graphite carbon nitride (g-C₃ N₄ ) has gained extensive attention in the scientific community due to its excellent physical and chemical properties, attractive electronic band structure, and low cost. In this paper, research progress in design strategies for g-C₃ N₄ -based photocatalysts in the past five years is reviewed from the perspectives of nanostructure construction, element doping, and heterostructure construction. To clarify the relationship between application requirements and structural design, variations in the morphology, electronic energy band structure, light absorption capacity, as well as interfacial charge transfer caused by various modification strategies are discussed in detail. The recent applications of g-C₃ N₄ -based photocatalysts for pollutant degradation and bacterial disinfection are reviewed, as well as the antimicrobial activity and degradation mechanisms. Finally, current challenges and future development directions for the practical application of g-C₃ N₄ -based photocatalysts are tentatively discussed.

Visible-Light-Driven Photocatalytic Inactivation of Bacteria, Bacteriophages, and Their Mixtures Using ZnO-Coated HDPE Beads as Floating Photocatalyst

Semiconductor materials used as photocatalysts are considered among the most effective ways to treat biologically polluted water. Certainly, efficiency depends on the selection of photocatalyst and its substrate, as well as the possibility of its application in a broader spectrum of light. In this study, a reactive magnetron sputtering technique was applied for the immobilisation of ZnO photocatalyst on the surface of HDPE beads, which were selected as the buoyant substrates for enhanced photocatalytic performance and easier recovery from the treated water. Moreover, the study compared the effect on the inactivation of the microorganism between ZnO-coated HDPE beads without Ni and with Ni underlayer. Crystal structure, surface morphology, and chemical bonds of as-deposited ZnO films were investigated by X-ray diffraction, scanning electron microscopy, and X-ray photoelectron spectroscopy, respectively. Visible-light-induced photocatalytic treatment was performed on the Gram-negative and Gram-positive bacteria and bacteriophages PRD1, T4, and their mixture. Higher bacteria inactivation efficiency was obtained using the ZnO photocatalyst with Ni underlayer for the treatment of S. Typhimurium and M. Luteus mixtures. As for infectivity of bacteriophages, T4 alone and in the mixture with PRD1 were more affected by the produced photocatalyst, compared with PRD1.

A Comprehensive Review of Graphitic Carbon Nitride (g-C3N4)-Metal Oxide-Based Nanocomposites: Potential for Photocatalysis and Sensing

g-C3N4 has drawn lots of attention due to its photocatalytic activity, low-cost and facile synthesis, and interesting layered structure. However, to improve some of the properties of g-C3N4, such as photochemical stability, electrical band structure, and to decrease charge recombination rate, and towards effective light-harvesting, g-C3N4-metal oxide-based heterojunctions have been introduced. In this review, we initially discussed the preparation, modification, and physical properties of the g-C3N4 and then, we discussed the combination of g-C3N4 with various metal oxides such as TiO2, ZnO, FeO, Fe2O3, Fe3O4, WO3, SnO, SnO2, etc. We summarized some of their characteristic properties of these heterojunctions, their optical features, photocatalytic performance, and electrical band edge positions. This review covers recent advances, including applications in water splitting, CO2 reduction, and photodegradation of organic pollutants, sensors, bacterial disinfection, and supercapacitors. We show that metal oxides can improve the efficiency of the bare g-C3N4 to make the composites suitable for a wide range of applications. Finally, this review provides some perspectives, limitations, and challenges in investigation of g-C3N4-metal-oxide-based heterojunctions.

Impact of piezoelectric effect on the heterogeneous visible photocatalysis of g-C3N4/Ag/ZnO tricomponent

In recent years, the piezophotocatalytic mechanism had been intensively recognized as a potential and promising route to sewage treatment. Here we report the piezoelectric effect improved heterogeneous photocatalysis of g-C₃N₄/Ag/ZnO (g-CN/A/Z) tricomponent in rhodomine B (RhB) degradation. Initially, the nanomaterials were characterized for their physico-chemical and optoelectronic properties using analytical techniques such as x-ray diffraction (XRD), scanning & transmission electron microscopes (SEM & TEM), UV-vis spectrophotometer and photoluminescence spectroscopy (PL). In addition, the photoelectrochemical activity of determining the photocurrent density and electrochemical impendence response were also been conducted. The catalytic properties of the tricomponent, g-CN/A/Z was studied with the degradation of RhB with visible photons irradiation and ultrasonication. In piezophotocatalysis, degradation up to 89% of RhB was achieved with 1.26 folds synergetic effect on par to the photocatalysis and piezocatalysis.

Fabrication and characterization of ternary sepiolite/g-C3N4/Pd composites for improvement of photocatalytic degradation of ciprofloxacin under visible light irradiation

The development of high-quality photocatalytic materials for the degradation of organic pollutants under visible light irradiation is a vital field of research. In the present study, a composite of natural sepiolite clay and synthetic graphitic carbon nitride (CN) mixed with dispersed palladium nanoparticles was developed for the efficient photocatalytic degradation of ciprofloxacin (CIP) under visible light irradiation. The sepiolite, CN, and composite materials were characterized by several techniques. The sepiolite/CN composite (SC30%) displayed superior activity than pristine sepiolite and CN, resulted from the generation of new electron trap states in the interfacial contract between sepiolite and CN to suppress the charge recombination of CN. Furthermore, the well-dispersed of 1 wt% Pd-nanoparticles in the SC30% composite collectively enhanced CIP degradation by avoiding the recombination of photogenerated electrons and holes. Additionally, the electron trap states on the surface of all samples were studied using novel reversed double-beam photoacoustic spectroscopy to understand electron transfer in the composites related to the photocatalytic degradation mechanism of CIP. The developed sepiolite/CN/Pd(0) composite can act as a potential catalyst for the degradation of organic pollutants in wastewater under visible light irradiation.