Synergistic photocatalytic-adsorption removal effect of NiFe2O4-Zn-Al mixed metal oxide composite under visible-light irradiation

Gelatin-based carbon quantum dot-molecularly imprinted polymer: Safe photoluminescent core-shell nano-carrier for the pH-responsive anticancer drug delivery

This study aims to synthesize a core-shell gelatin-based carbon quantum dot-molecularly imprinted polymer (MIP@g-CQD) via the precipitation free-radical polymerization process using methotrexate (MTX) as a model anticancer template. To investigate the efficiency of the prepared photoluminescent MIP@g-CQD as a pH-responsive nano-carrier, MTX was loaded into MIP@g-CQD by soaking in a drug solution and the release behavior of the loaded drug was evaluated in the necessary pH values (7.4, 5). The successful synthesis of materials was characterized using PL, TEM, FE-SEM, DLS, and FT-IR analyses. Interestingly, the created cavities in the core-shell nano-carriers can interact with the MTX molecules effectively, leading to an increase in the loading capacity. According to the obtained results from Langmuir adsorption isotherms, the imprinting factor was calculated (IF = 4.91). Also, the binding kinetics of MTX revealed the creation of particular recognition sites in the core-shell polymeric network. The MTX-loaded MIP@g-CQD displayed a low rate and limited release at the simulated physiological environment (pH 7.4, 37 °C), but it is increased at tumor tissue (pH 5, 41 °C) conditions, which can lead to long-term and sustained release of MTX in the desired target. This property of MIP@g-CQD could avoid the release of MTX in normal physiological conditions, decreasing the possible side effects of MTX drug. Owing to the existence of amide functional groups in the nano-carrier structure and its negatively charged nature, the MTT assay displayed desirable cytotoxicity against the breast cancer cell line (MCF-7) for the MTX-loaded nano-carrier. According to the obtained results, the prepared safe photoluminescent MIP@g-CQD with appropriate pH-responsivity has a high ability to be applied as an anticancer and bio-detection agent.

Preparation of mixed matrix self-cleaning membrane incorporated by Z-scheme heterostructure via robust engineering in terms of dimension for decreasing cake fouling in a cross-flow reactor

Reducing irreversible fouling in polymer membranes by integrating photocatalytic and membrane processes as the self-cleaning photocatalytic membrane is a promising candidate for improving membrane filtration performance. In this study, mixed matrix photocatalytic membranes were prepared from the combination of different morphologies ZnO-g-C3N4 heterostructure in the polymer matrix by the phase-separation method. To investigate the self-cleaning and performance properties of mixed matrix photocatalytic membranes prepared from different morphologies heterostructures, the photocatalytic membrane reactor with a visible-light source was applied. Nanoflower/nanosheet (NF/NS) ZnO-g-C3N4 photocatalytic membrane showed good self-cleaning performance owing to the high photocatalytic performance of NF/NS ZnO-g-C3N4 heterostructure by the reduction of irreversible membrane fouling, thus improving the antifouling and filtration performance of the membrane. Also, the morphology and the uniform distribution of the NF/NS ZnO-g-C3N4 heterostructure in the membrane matrix caused good hydrophilic properties, high porosity, and a more symmetrical structure in the (NF/NS) ZnO-g-C3N4 photocatalytic membrane (F4). For the F4 membrane, the permeability and rejection values increased from 40.35 L m-2 h-1 and 90.9% in the dark environment to 84.37 L m-2 h-1 and 97.4% under visible-light for dye pollutants. Accordingly, F4 had the best filtration and self-cleaning performance, which can be used as a promising visible-light photocatalytic membrane in wastewater treatment processes.

Superhydrophobic and Photocatalytic Synergistic Self-Cleaning Coating Constructed by Hierarchically Structured Flower-like Hollow SiO2@TiO2 Spheres with Oxygen Vacancies

The self-cleaning coating has both superhydrophobic physical and photocatalytic chemical self-cleaning properties, which has attracted the wide attention of researchers in recent years. First, the flower-like hollow SiO2@TiO2 spheres with oxygen vacancies (rFHSTs) were prepared by the liquid-phase reduction method, in which several different functional components were integrated. Meanwhile, the influence mechanisms of the physical structure and chemical composition on the photocatalytic properties are discussed in detail. The results proved that rFHSTs exhibited the enhanced photoresponse range and photocatalytic degradation performance in visible light because of the synergistic effect of the microstructure (internal cavity, 3D flower-like nanosheet), SiO2/TiO2 heterojunction structure, and oxygen vacancies. After that, superhydrophobic modified rFHSTs were used as fillers to fabricate PVA/PFDTS-rFHSTs composite coatings with both physical and chemical self-cleaning properties. The self-cleaning performances and principles of the composite coating were examined and explored. The results showed that the low surface energy of the hydrophobic chain segment, the inherent particle effect, and the photocatalytic activity of rFHSTs were responsible for the superhydrophobic and photocatalytic effects, finally endowing the composite coating with self-cleaning performance. In short, this study is profound for the development and application of self-cleaning coatings with both physical and chemical performances.

MoS2-modified MIL-53(Fe) for synergistic adsorption-photocatalytic degradation of tetracycline

In this paper, MoS₂@MIL-53(Fe) (noted as MSMF) metal-organic backbone adsorption photocatalysts were successfully prepared by a solvothermal method. For the degradation performance of MSMF catalysts on tetracycline pollutants, the effects of MoS₂ doping ratio, reaction mode, and contaminant concentration on the degradation performance were investigated. And the materials were characterized by XRD, XPS, SEM, BET, PL, and ESR to investigate the reaction mechanism. The results showed that the optimal synthesis mass ratio of MoS₂:MIL-53 (Fe) prepared by holding at 150 °C for 10 h was 0.20:1 (20%MSMF). In the adsorption-photocatalytic synergy experiment, 87.62% of tetracycline (30 mg/L) could be removed with 0.20 g/L of 20%MSMF after 40 min of UV irradiation, while the removal of tetracycline by MoS₂ and MIL-53 (Fe) was only 35.99% and 65.40%. The characterization showed that the specific surface area and total pore volume of 20%MSMF were 1.12 and 3.12 times higher than those of MIL-53 (Fe), respectively. And the separation and transfer efficiency of electron-hole pairs were improved for 20%MSMF compared to the constituent components. These results suggest that the doping of MoS₂ enhances the adsorption and photocatalytic ability of MIL-53 (Fe) that can be used for the efficient treatment of tetracycline.