Fabrication and structural of gold/cerium nanoparticles on tin disulfide nanostructures and decorated on hyperbranched polyethyleneimine for photocatalysis, reduction, hydrogen production and antifungal activities

Synthesis and Photocatalytic Application of Magnetic CoFe2O4/Conjugated Poly(vinyl chloride) Derivative Nanocomposite

CoFe2O4 has potential for application as a magnetically recoverable visible-light photocatalyst, but its photocatalytic activity is encumbered by the high recombination probability of its photogenerated holes (h+) and electrons (e-). This work was undertaken to boost the photocatalysis of CoFe2O4 through coupling with conjugated poly(vinyl chloride) derivative (CPVC). An easily implementable solvothermal-liquid solid mixing-evaporation of the solvent-pyrolysis method was exploited to synthesize CoFe2O4/CPVC nanocomposites. The photocatalytic capabilities of the products were assessed through photocatalyzing the reduction of Cr(VI) under visible-light (λ > 420 nm). The results demonstrate that the optimal CoFe2O4/CPVC nanocomposite (CoFe2O4/CPVC-2) has markedly heightened photocatalytic activity (3.6 times that of CoFe2O4) and competent reusability and is magnetically recoverable. Furthermore, CoFe2O4/CPVC-2 also shows superior performance toward photocatalytic treatment of the diluted Cr(VI)-containing passivation solution of copper alloys. It is deduced based on the photoelectricity measurement results that the increased photocatalysis of CoFe2O4/CPVC-2 is chiefly attributed to its p-n heterojunction structure, which greatly elevates the h+-e- separation and transfer efficiency. When waste PVC plastic films (replacing the new pure PVC powder) were utilized for the synthesis, the obtained CoFe2O4/CPVC nanocomposite exhibited even better photocatalytic activity (4 times that of CoFe2O4). This work not only has made a new magnetically recoverable, efficient visible-light photocatalyst for decontamination of Cr(VI) in water but also is inspirational for recycling PVC plastic waste to produce high-valued visible-light photocatalysts.

Synthesis of CuO, ZnO nanoparticles, and CuO-ZnO nanocomposite for enhanced photocatalytic degradation of Rhodamine B: a comparative study

Water pollution, arising from the presence of toxic dyes and chemicals, is a global challenge, urging the need for eco-friendly solutions in water decontamination. This study focused on the synthesis of copper oxide nanoparticles (CuO NPs), zinc oxide nanoparticles (ZnO NPs), and a bimetallic CuO-ZnO nanocomposite (CZ NC) through an environmentally friendly method employing Tragia involucrata L. leaf extract. Comprehensive analysis of structural and optical properties involved using various analytical techniques such as XRD, FT-IR, XPS, UV-DRS, PL, FE-SEM, EDAX, TEM, SAED, zeta potential, TGA, and BET. In comparison to pristine CuO and ZnO NPs, the CZ-NC demonstrated notably enhanced photocatalytic activity in the degradation of Rhodamine B dye (RhB). The optimum conditions for RhB degradation were found to be a pH of 9 and a catalyst dosage of 1 mg/mL for a concentration of 10 ppm. Under these conditions, CuO NPs, ZnO NPs, and CZ-NC demonstrated high efficiencies of 78%, 83%, and 96.1% respectively over 105 min. Through LC-HRMS, the identification of degradation products offered valuable insights into the pathway of photocatalytic degradation. Furthermore, toxicity analysis of intermediates, conducted through ECOSAR software, indicated the formation of non-toxic by-products (ChV/LC50/EC50 > 100) after the completion of the reaction. Furthermore, the recycled catalysts exhibited sustained stability for up to 4 cycles, with only a minor decrease in activity of up to 6.8%. This confirms their catalytic efficacy in purifying polluted water. This research significantly contributes to the progress of environmentally friendly nanocomposites, enhancing their efficacy in the realm of environmental remediation.

Central composite design and mechanism of antibiotic ciprofloxacin photodegradation under visible light by green hydrothermal synthesized cobalt-doped zinc oxide nanoparticles

In this research, different Co2+ doped ZnO nanoparticles (NPs) were hydrothermally synthesized by an environmentally friendly, sustainable technique using the extract of P. capillacea for the first time. Co-ZnO was characterized and confirmed by FTIR, XPS, XRD, BET, EDX, SEM, TEM, DRS UV-Vis spectroscopy, and TGA analyses. Dislocation density, micro strains, lattice parameters and volume of the unit cell were measured using XRD results. XRD suggests that the average size of these NPs was between 44.49 and 65.69 nm with a hexagonal wurtzite structure. Tauc plot displayed that the optical energy bandgap of ZnO NPs (3.18) slowly declines with Co doping (2.96 eV). Near complete removal of the ciprofloxacin (CIPF) antibiotic was attained using Green 5% of Hy-Co-ZnO in the existence of visible LED light which exhibited maximum degradation efficiency (99%) within 120 min for 30 ppm CIPF initial concentration. The photodegradation mechanism of CIPF using Green Hy-Co-ZnO NPs followed the Pseudo-first-order kinetics. The Green Hy-Co-ZnO NPs improved photocatalytic performance toward CIPF for 3 cycles. The experiments were designed using the RSM (CCD) method for selected parameters such as catalyst dosage, antibiotic dosage, shaking speed, and pH. The maximal CIPF degradation efficiency (96.4%) was achieved under optimum conditions of 39.45 ppm CIPF dosage, 60.56 mg catalyst dosage, 177.33 rpm shaking speed and pH 7.57.

A review on synergistic coexisting pollutants for efficient photocatalytic reaction in wastewater remediation

With the tremendous development of the economy and industry, the pollution of water is becoming more serious due to the excessive chemical wastes that need to remove thru reduction or oxidation reactions. Simultaneous removal of dual pollutants via photocatalytic redox reaction has been tremendously explored in the last five years due to effective decontamination of pollutants compared to a single pollutants system. In a photocatalysis mechanism, the holes in the valence band can remarkably promote the oxidation of a pollutant. At the same time, photoexcited electrons are also consumed for the reduction reaction. The synergistic between the reduction and oxidation inhibits the recombination of electron-hole pairs extending their lifetime. In this review, the binary pollutants that selectively removed via photocatalysis reduction or oxidation are classified according to heavy metal-organic pollutant (HM/OP), heavy metal-heavy metal (HM/HM) and organic-organic pollutants (OP/OP). The intrinsic between the pollutants was explained in three different mechanisms including inhibition of electron-hole recombination, ligand to metal charge transfer and electrostatic attraction. Several strategies for the enhancement of this treatment method which are designation of catalysts, pH of mixed pollutants and addition of additive were discussed. This review offers a recent perspective on the development of photocatalysis system for industrial applications.

Ag doped Sn3O4 nanostructure and immobilized on hyperbranched polypyrrole for visible light sensitized photocatalytic, antibacterial agent and microbial detection process

Ag doped Sn₃O₄ Nanostructure and immobilized on hyperbranched polypyrrole is investigated in this project. The product was synthesized by the hydrothermal synthesis method. The surface and structural characteristics of the product was studied by different instrumental analysis. The fabricated nanocomposites was utilized as a nano photocatalyst in the removal of methylene blue dye. The crystallography results depicts the triclinic phase of Sn₃O₄ with the crystallite size 36.3 nm. The band gap of the Ag-Sn₃O₄/hyperbranched polypyrrole was found 1.50 eV from kubelka-munk measurements. The specific surface area was increased in the presence of the hyperbranched polypyrrole as compared to Ag-Sn₃O₄ samples. The photo-catalytic activity of composites was found 100.0% degradation of CR in 30 min under visible light irradiation. The catalytic kinetic was followed from the first kinetic model. Moreover, the Ag/Sn₃O₄/hyperbranched polypyrrole was applied as a bactericidal agent against Streptococcus pneumoniae, and Pseudomonas aeruginosa bacteria. Determination of Streptococcus pyogenes as a pathogenic bacteria was investigated by using aptamer/Ag/Sn₃O₄/hyperbranched polypyrrole in peroxidase activity. The detection limit of S. pyogenes was 71.0 CFU/mL by using the nano-aptamer.

SPR based gold nano-probe as optical sensor for cysteine detection via plasmonic enhancement in the presence of Cr3

A selective and sensitive detection of L-cysteine (Cys) is an important tool for various biological studies. Here, Au nanoparticles (NPs) were prepared by chemical reduction technique. The probe was developed to detect and quantify Cys in the presence of Cr³⁺ ions which acts as a cross linker. The citrate capped Au NPs probe was analyzed by UV-visible spectrophotometry, TEM, EDAX, FTIR, DLS, XPS and zetasize. The zeta potential and effective size of Au NPs were -41.22 mV and 12 nm, respectively. The Cys interaction with Au NPs showed drastic colour variation from red to purple and colourless with rapid response time of 1 min. The limit of detection (LOD) of Au NPs probe was as low as 0.012 nM. The TEM image of Au NPs after Cys interaction verified the aggregation that resulted in colour change. The XPS core level scans of Au 4f showed 0.3 eV red shift when Cyswas interacted. The Au NPs sensor is highly selective for Cys with excellent reproducibility. Acidic pH slightly favored Cys detection. Further, the probe was applied to estimate Cys quantity from milk, urine, blood and environmental augmented samples in the presence of other amino acids . The study suggests that the proposed Au NPs could detect Cys with high accuracy from various biological samples.

A novel SPR based Fe@Ag core-shell nanosphere entrapped on starch matrix an optical probe for sensing of mercury(II) ion: A nanomolar detection, wide pH range and real water sample application

Recent trends in nanotechnology paved a way for the development of detection systems for heavy metals, toxins and environmental pollutants. The present study focused on Hg²⁺ detection by a core shell Fe@Ag-starch nanosphere phenylalanine conjugate. The characterization of core shell Fe@Ag-starch nanosphere was performed by using TEM, zetasizer, particlesize analyzer, UV-visible absorption spectrophotometer, EDAX, FTIR and TGA. The NPs showed λmax at 408 nm. The effective diameter of synthesized nanosphere was 37 ± 2 nm and it possessed the surfaces charge of -36.12 ± 2.5 mV. The Fe@Ag-starch-phenylalanine conjugate reacted with Hg²⁺, the yellow colour of the nanosphere phenylalanine conjugate became colourless. The real water sample was collected and the amount of Hg²⁺ was calculated by using the prepared nanosphere. The detection of Hg²⁺ at different conditions including various saline concentrations, temperature and pH were also studied and the detection was found to be effective at 40 °C, pH 5 and 0.1% of saline concentration. The LOD of Hg²⁺ ions by Fe@Ag-starch nanosphere were calculated to be 1.84 nM. The influence of other metal ions present in the analyte did not show any interference on Hg²⁺ detection. In addition, the photocatalytic and antibacterial activities of Fe@Ag-starch nanosphere were also studied. The study confirmed that the core shell nanosphere can also be used for environmental cleanup and disinfection.