Electrostatic adsorption of ultra-small silver nanoclusters on titanium dioxide modified mesoporous MCM-41as a high-performance photocatalyst for wastewater treatment

Role of transition metals in coinage metal nanoclusters for the remediation of toxic dyes in aqueous systems

A difficult issue in chemistry and materials science is to create metal compounds with well-defined components. Metal nanoclusters, particularly those of coinage groups (Cu, Ag, and Au), have received considerable research interest in recent years owing to the availability of atomic-level precision via joint experimental and theoretical methods, thus revealing the mechanisms in diverse nano-catalysts and functional materials. The textile sector significantly contributes to wastewater containing pollutants such as dyes and chemical substances. Textile and fabric manufacturing account for about 7 × 105 tons of wastewater annually. Approximately one thousand tons of dyes used in textile processing and finishing has been recorded as being discharged into natural streams and water bodies. Owing to the widespread environmental concerns, research has been conducted to develop absorbents that are capable of removing contaminants and heavy metals from water bodies using low-cost technology. Considering this idea, we reviewed coinage metal nanoclusters for azo and cationic dye degradation. Fluorometric and colorimetric techniques are used for dye degradation using coinage metal nanoclusters. Few reports are available on dye degradation using silver nanoclusters; and some of them are discussed in detailed herein to demonstrate the synergistic effect of gold and silver in dye degradation. Mostly, the Rhodamine B dye is degraded using coinage metals. Silver nanoclusters take less time for degradation than gold and copper nanoclusters. Mostly, H2O2 is used for degradation in gold nanoclusters. Still, all coinage metal nanoclusters have been used for the degradation due to suitable HOMO-LUMO gap, and the adsorption of a dye onto the surface of the catalyst results in the exchange of electrons and holes, which leads to the oxidation and reduction of the adsorbed dye molecule. Compared to other coinage metal nanoclusters, Ag/g-C3N4 nanoclusters displayed an excellent degradation rate constant with the dye Rhodamine B (0.0332 min-1). The behavior of doping transition metals in coinage metal nanoclusters is also reviewed herein. In addition, we discuss the mechanistic grounds for degradation, the fate of metal nanoclusters, anti-bacterial activity of nanoclusters, toxicity of dyes, and sensing of dyes.

Acetate Ions Facilitated Immobilization of Highly Dispersed Transition Metal Oxide Nanoclusters in Mesoporous Silica

The immobilization of tiny active species within inert mesoporous silica imparts a range of functions, enhancing their applicability. A significant obstacle is the spontaneous migration and aggregation of these species within the mesopores, which threaten their uniform distribution. To address this, we propose a postmodification method that involves grafting transition metal oxide nanoclusters into silica mesopores via interfacial condensation, catalyzed by acetate ions. Specifically, CuO nanoclusters, in the form of oligomeric [O1-x-Cu2-(OH) 2x]n2+, have a strong interaction with the silica framework. This interaction inhibits their growth and prevents mesopore blockage. Theoretical calculation results reveal that the acetate ion promotes proton transfer among various hydroxy species, lowering the free energy and thereby facilitating the formation of Cu-O-Si bonds. This technique has also been successfully applied to the encapsulation of four other types of transition metal oxide nanoclusters. Our encapsulation strategy effectively addresses the challenge of dispersing transition metal oxides in mesoporous silica, offering a straightforward and widely applicable method for enhancing the functionality of mesoporous materials.

Covalently anchoring silver nanoclusters Ag44 on modified UiO-66-NH2 with Bi2S3 nanorods and MoS2 nanoparticles for exceptional solar wastewater treatment activity

For the first time, covalently anchoring size selected silver nanoclusters [Ag44(MNBA)30] on the Bi2S3@UiO-66-NH2 and MoS2@UiO-66-NH2 heterojunctions were constructed as novel photocatalysts for photodegradation of methylene blue (MB) dye. The anchoring of Ag44 on MoS2@UiO-66-NH2 and Bi2S3@UiO-66-NH2 heterojunctions extended the light absorption of UiO-66-NH2 to the visible region and improved the transfer and separation of photogenerated charge carriers through the heterojunctions with a unique band gap structure. The UV-Vis-NIR diffuse reflectance spectroscopic analysis confirmed that the optical absorption properties of the UiO-66-NH2 were shifted from the UV region at 379 nm to the visible region at ~ 705 nm after its doping with Bi2S3 nanorods and Ag44 nanoclusters (Bi2S3@UiO-66-NH-S-Ag44). The prepared Bi2S3@UiO-66-NH-S-Ag44 and MoS2@UiO-66-NH-S-Ag44 photocatalysts exhibited exceptional photocatalytic activity for visible light degradation of MB dye. The photocatalysts exhibited complete decolorization of the MB solution (50 ppm) within 90 and 120 min stirring under visible light irradiation, respectively. The supper photocatalytic performance and recycling efficiency of the prepared photocatalysts attributed to the covalent anchoring of the ultra-small silver clusters (Ag44) on the heterojunctions surface. The X-ray photoelectron spectroscopic analysis confirmed the charge of the silver clusters is zero. The disappearance of the N-H bending vibration peak of primary amines in the FTIR analysis of Bi2S3@UiO-66-NH-S-Ag44 confirmed the covalent anchoring of the protected silver nanoclusters on the UiO-66-NH2 surface via the condensation reaction. The Bi2S3@UiO-66-NH-S-Ag44 catalyst exhibited excellent recyclability efficiency more than five cycles without significant loss in activity, indicating their good potential for industrial applications. The texture properties, crystallinity, phase composition, particle size, and structural morphology of the prepared photocatalysts were investigated using adsorption-desorption N2 isotherms, X-ray diffraction (XRD), HR-TEM, and FE-SEM, respectively.

In-situ preparation of sulfonated carbonaceous copper oxide-zirconia nanocomposite as a novel and recyclable solid acid catalyst for reduction of 4-nitrophenol

The missing-linker defects of UiO-66 were exploited to covalently anchor Cu nanoclusters (Cu/UiO-66). The molecular interactions between the metals and oxides as copper-zirconia interfaces in Cu/UiO-66 are essential for heterogeneous catalysis, leading to remarkable synergistic impacts on activity and selectivity. Homogeneously distributed carbonaceous mixed metal oxides (CuO/ZrO₂@C) nanocomposite was prepared via carbonization of the Cu/UiO-66 at 600 °C for 3 h in air. To enhance the acidity properties of the CuO/ZrO₂@C nanocomposite, a small amount of sulfuric acid was added and heated at 150 °C under an N₂ atmosphere (CuO/ZrO₂-SO₃H@C). The synthesised Cu/UiO-66 and CuO/ZrO₂-SO₃H@C catalysts were used as novel catalysts in the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). The Cu/UiO-66 and CuO/ZrO₂-SO₃H@C catalysts displayed complete conversion of the 4-NP solution during (4 and 2 min) stirring at room temperature, respectively. These two catalysts exhibited a high reduction rate of 8.61 × 10^-3 s^-1, and 18.3 × 10^-3 s^-1, respectively. The X-ray photoelectron spectroscopic (XPS) analysis showed the charge of copper atoms in the Cu/UiO-66 catalyst was Cu⁰/Cu^II and in the CuO/ZrO₂-SO₃H@C catalyst was Cu^I/Cu^II with nearly the same ratio (65/35). The particle size and the elemental composition of the CuO/ZrO₂-SO₃H@C catalyst were analysed by using high resolution transmission electron microscopy (HR-TEM), and energy-dispersive X-ray spectroscopy (EDS), and elemental mapping, respectively. The key point beyond the high catalytic activity and selectivity of the CuO/ZrO₂-SO₃H@C catalyst is both the carbon-metal oxides heterojunction structure that leads to good dispersion of the CuO and ZrO₂ over the carbon sheets, and the high acidity properties that come from the combination between the Brønsted acid sites from sulfuric acid and Lewis acid sites from the UiO-66. The catalysts exhibited good recyclability efficiency without significant loss in activity, indicating their good potential for industrial applications.

Removing methylene blue from water: A study of sorption effectiveness onto nanoparticles-doped activated carbon

In this present study, silver (Ag) and titanium dioxide (TiO₂) nanoparticles were successfully deposited on coconut shell-derived activated carbon (CSAC), to synthesize a novel nanocomposite (CSAC@AgNPs@TiO₂NPs) for the adsorption of Methylene Blue (MB) dye from aqueous solution. The fabricated CSAC@AgNPs@TiO₂NPs nanocomposite was analyzed by Scanning Electron Microscope (SEM), X-ray Diffraction (XRD), Fourier-Transform Infrared Spectroscopy (FTIR), Transmission Electron Microscope (TEM) equipped with Energy Dispersive X-ray spectroscopy (EDS) detector, X-ray Photoelectron Spectroscope (XPS), and Brunauer-Emmett-Teller (BET). The successful deposition of AgNPs and TiO₂NPs on CSAC surface was revealed by the TEM/EDX, SEM, and XPS analysis. The mesopore structure of CSAC@AgNPs@TiO₂NPs has a BET surface area of 301 m²/g. The batch adsorption studies were conducted and the influence of different parameters, i.e., adsorbent dose, adsorption time, initial dye concentration, pH and temperature were investigated. The nonlinear isotherm and kinetic modelling demonstrated that adsorption data were best fitted by Sips isotherm and pseudo-second-order models, respectively. The maximum adsorption capacity of MB onto CSAC@AgNPs@TiO₂NPs by the Sips model was 184 mg/g. Thermodynamic results revealed that the adsorption was endothermic, spontaneous and physical in nature. CSAC@AgNPs@TiO₂NPs revealed that MB absorption by CSAC@AgNPs@TiO₂NPs was spontaneous and endothermic. The uptake capacity of MB was influenced significantly by the presence of competing ions including, NO₃^-, HCO_3, Ca²⁺, and Na⁺. Repeated tests indicated that the CSAC@AgNPs@TiO₂NPs can be regenerated and reused six times before being discarded. The primary separation mechanism between MB dye and CSAC@AgNPs@TiO₂NPs was the electrostatic interaction. Thus, CSAC@AgNPs@TiO₂NPs was an outstanding material, which displayed good applicability in real water with ≥ 97% removal of MB dye.

A highly selective fluorescent sensor for chlortetracycline based on histidine-templated copper nanoclusters

In this study, histidine-protected copper nanoclusters (Cu NCs@His) were established by using a one-pot method, which histidine and ascorbic acid were applied as the template and reducing agent, respectively. The as-developed Cu NCs@His endued green emission wavelength at 494 nm with the excitation of 378 nm. The Cu NCs@His exhibited green fluorescence under UV light (365 nm). Using Cu NCs@His as a pattern nanosensor, the fluorescent "turn off" mechanism was fabricated for the determination of chlortetracycline in the light of the linear decrease of fluorescence intensities around 494 nm. The chlortetracycline conducted as a quencher, leading to reveal an excellent linear relationship between ln(F₀/F) of Cu NCs@His and chlortetracycline concentrations with the range of 0.5-200 μM, and the detection limit was 0.876 μM. The fluorescence quenching of Cu NCs@His revealed excellent selectivity for chlortetracycline over other potential interfering substances in the human body. This strategy was exhibited to be a convenient sensing platform for the detection of chlortetracycline in real medical samples, which could unfold a brand new and direct system for the sensing of chlortetracycline in real samples.