The upsurge of photocatalysts in antibiotic micropollutants treatment: Materials design, recovery, toxicity and bioanalysis

Surface coordination induced a quasi p-n junction for efficient visible light driven degradation of tetracycline over hydroxyapatite

The removal of antibiotics from aquatic solutions remains a global environmental challenge. In this work, the photocatalytic removal of a typical antibiotic-tetracycline (TC) using hydroxyapatite (HAp) as a catalyst was investigated. It was impressive that TC could be efficiently degraded by HAp under visible light irradiation, even though both HAp and TC exhibited poor harvesting in visible light region. The experimental and theoretical explorations were undertaken to thoroughly investigate the underlying mechanism of visible light degradation of TC over HAp. The results indicated that the formed TC-HAp complexes via surface coordination played an important role as photosensitizers for the visible light response. Together with the formation of a quasi p-n junction via band alignment, the photogenerated electrons in the highest unoccupied molecular orbital (HOMO) of TC-HAp were excited to the lowest unoccupied molecular orbital (LUMO) and subsequently migrated to the conduction band of HAp to achieve the efficient charge separation. Superoxide radicals and holes were found to be the major active species for TC degradation. The toxicity evaluation showed that TC could be transferred to the lower toxic intermediates, and deep oxidation with prolonged reaction time was necessary to eliminate the toxicity of TC. This work demonstrates the surface coordination with subsequent quasi p-n junction mechanism of TC degradation over HAp under visible light, which will stimulate us to explore new efficient photocatalytic systems for the degradation of various contaminants.

Light-driven photocatalysis as an effective tool for degradation of antibiotics

Antibiotic contamination has become a severe issue and a dangerous concern to the environment because of large release of antibiotic effluent into terrestrial and aquatic ecosystems. To try and solve these issues, a plethora of research on antibiotic withdrawal has been carried out. Recently photocatalysis has received tremendous attention due to its ability to remove antibiotics from aqueous solutions in a cost-effective and environmentally friendly manner with few drawbacks compared to traditional photocatalysts. Considerable attention has been focused on developing advanced visible light-driven photocatalysts in order to address these problems. This review provides an overview of recent developments in the field of photocatalytic degradation of antibiotics, including the doping of metals and non-metals into ultraviolet light-driven photocatalysts, the formation of new semiconductor photocatalysts, the advancement of heterojunction photocatalysts, and the building of surface plasmon resonance-enhanced photocatalytic systems.

Novel Z-scheme MgFe2O4/Bi2WO6 heterojunction for efficient photocatalytic degradation of tetracycline hydrochloride: Mechanistic insight, degradation pathways and density functional theory calculations

In this study, a new Z-scheme MgFe2O4/Bi2WO6 heterojunction was successfully prepared by hydrothermal and wet ball milling process. The results of the study showed that after 90 min of visible light exposure, the photocatalytic degradation of tetracycline hydrochloride (TCH) by 25%-MgFe2O4/Bi2WO6 heterojunction was as high as 95.82%, and the highest photocatalytic rate (0.0281 min-1) was 4.61 and 3.43 times higher than that of pure Bi2WO6 (0.0061 min-1) and MgFe2O4 (0.0082 min-1), respectively. Furthermore, spin-polarized density functional theory (DFT) calculations were performed to provide additional evidence of the presence of a Z-scheme charge transfer mechanism between MgFe2O4 and Bi2WO6. We investigated the effects of initial TCH concentration, pH, coexisting ions and different water sources on the efficiency of photocatalytic degradation of TCH in composite samples. The recovery experiments demonstrated that the MgFe2O4/Bi2WO6 composites had good stability and repeatability. A series of experimental results showed that 25%-MgFe2O4/Bi2WO6 had a larger specific surface area, better ultraviolet and visible absorbance, superior charge transfer and higher efficiency of photogenerated electron-hole pair separation. This paper provides new ideas for the design and preparation of new Z-scheme heterojunctions and has great prospects for practical applications in the field of wastewater treatment.

Influence by varying organic matter content and forms in suspended particulate matter: impacts on the adsorption of tetracycline and norfloxacin

Antibiotics are commonly detected in natural waters. The organic matter (OM) in suspended particulate matter (SPM) has a critical impact on the adsorption of antibiotics in water. We investigated the contribution of OM content and form to the adsorption of tetracycline (TC) and norfloxacin (NOR) in the SPM of Taihu Lake. To change the content and form of OM in SPM, the samples were subjected to pyrolysis at 505 ˚C and oxidization with H2O2, respectively. Combustion almost completely removed OM, while oxidation removed most of the OM and transformed the remaining OM. Regardless of whether the OM changed or not, the adsorption of NOR and TC by SPM was more in line with the pseudo-second-order kinetic model instead of pseudo-first-order. The fitting of the intraparticle diffusion model showed that the removal of OM had a certain degree of change in the adsorption process. The isothermal adsorption of TC in all samples was more in line with the Temkin model. The isothermal adsorption of NOR in the oxidized sample conformed to the Temkin model, while it conformed to the Langmuir model in the original sample and the sample removed OM via combustion. The adsorption capacity of SPM with almost complete removal of OM significantly decreased, while conversely, the adsorption capacity of SPM after oxidation increased. This indicates that both the content and form of OM affect the adsorption of antibiotics by SPM, and the form of OM has a greater impact. The contribution of OM to NOR adsorption was greater than that of TC. In conclusion, the results verify the importance of OM in adsorbing antibiotics onto SPM, which may provide basic data for antibiotic migration in surface water.

Biofunctionalized CdS Quantum Dots: A Case Study on Nanomaterial Toxicity in the Photocatalytic Wastewater Treatment Process

The toxic nature of inorganic nanostructured materials as photocatalysts is often not accounted for in traditional wastewater treatment reactions. Particularly, some inorganic nanomaterials employed as photocatalysts may release secondary pollutants in the form of ionic species that leach out due to photocorrosion. In this context, this work is a proof-of-concept study for exploring the environmental toxicity effect of extremely small-sized nanoparticles (<10 nm) like quantum dots (QDs) that are employed as photocatalysts, and in this study, cadmium sulfide (CdS) QDs are chosen. Typically, CdS is an excellent semiconductor with suitable bandgap and band-edge positions that is attractive for applications in solar cells, photocatalysis, and bioimaging. However, the leaching of toxic cadmium (Cd2+) metal ions due to the poor photocorrosion stability of CdS is a matter of serious concern. Therefore, in this report, a cost-effective strategy is devised for biofunctionalizing the active surface of CdS QDs by employing tea leaf extract, which is expected to hinder photocorrosion and prevent the leaching of toxic Cd2+ ions. The coating of tea leaf moieties (chlorophyll and polyphenol) over the CdS QDs (referred to hereafter as G-CdS QDs) was confirmed through structural, morphological, and chemical analysis. Moreover, the enhanced visible-light absorption and emission intensity of G-CdS QDs in comparison to that of C-CdS QDs synthesized through a conventional chemical synthesis approach confirmed the presence of chlorophyll/polyphenol coating. Interestingly, the polyphenol/chlorophyll molecules formed a heterojunction with CdS QDs and enabled the G-CdS QDs to exhibit enhanced photocatalytic activity in the degradation of methylene blue dye molecules over C-CdS QDs while effectively preventing photocorrosion as confirmed from cyclic photodegradation studies. Furthermore, detailed toxicity studies were conducted by exposing zebrafish embryos to the as-synthesized CdS QDs for 72 h. Surprisingly, the survival rate of the zebrafish embryos exposed to G-CdS QDs was equal to that of the control, indicating a significant reduction in the leaching of Cd2+ ions from G-CdS QDs in comparison to C-CdS QDs. The chemical environment of C-CdS and G-CdS before and after the photocatalysis reaction was examined by X-ray photoelectron spectroscopy. These experimental findings prove that biocompatibility and toxicity could be controlled by simply adding tea leaf extract during the synthesis of nanostructured materials, and revisiting green synthesis techniques can be beneficial. Furthermore, repurposing the discarded tea leaves may not only facilitate the control of toxicity of inorganic nanostructured materials but can also help in enhancing global environmental sustainability.

Zeolite Y-supported carbon-doped TiO2 nanocomposites: Efficient solar photocatalysts for the purification of medicinal wastewater

The existence of antibiotics in aquatic streams destroys water quality and thereby poses serious ecological hitches. Photocatalysis involving nanosemiconductors is an environmentally benign technique for the mineralization of antibiotics. Herein, we prepared a new visible light-sensitive photocatalyst, zeolite Y-supported carbon-doped TiO₂ nanocomposite (zeolite Y-c-TiO₂), for the elimination of cefazolin antibiotic in wastewater systems. The structural and optical properties of the synthesized nanocomposites were investigated by Fourier transform infrared spectroscopy (FT-IR), powder X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Brunauer-Emmett-Teller surface area analysis (BET) as well as diffuse reflectance spectroscopy (UV-DRS) and photoluminescence spectroscopy (PL). The UV-Vis absorbance spectrum of zeolite Y-c-TiO₂ exhibited a red shift towards longer wavelength with an increase in visible light absorption as compared to pure TiO₂ nanoparticles and zeolite Y-supported TiO₂ nanocomposites (zeolite Y-TiO₂). Accordingly, the photocatalytic action of the zeolite Y-c-TiO₂ for the degradation of methylene blue was evaluated under solar simulator, and it turned out to be highly efficient (100%) mineralization as compared to TiO₂-nanoparticles (42%) and zeolite Y-TiO₂ (62%) after 70 min irradiation for a 50mg L^-1 methylene blue solution. Radical scavenging experiments revealed the involvement of hydroxyl radicals, superoxide radicals, and photogenerated holes in the degradation process. Consequently, zeolite Y-c-TiO₂ was applied for the photocatalytic degradation of the cefazolin antibiotic in water, and complete degradation of cefazolin (50 mg L^-1) was observed within 6 h of solar light irradiation on zeolite Y-c-TiO₂. The degradation pathway of cefazolin was proposed by considering various intermediates detected via LC-MS analysis. The study points to the significant potential of zeolite Y-c-TiO₂ photocatalyst for the purification of medicinal wastewater under sunlight.

Facile Synthesis of Gram-Scale Mesoporous Ag/TiO2 Photocatalysts for Pharmaceutical Water Pollutant Removal and Green Hydrogen Generation

This work demonstrates a two-step gram-scale synthesis of presynthesized silver (Ag) nanoparticles impregnated with mesoporous TiO₂ and evaluates their feasibility for wastewater treatment and hydrogen gas generation under natural sunlight. Paracetamol was chosen as the model pharmaceutical pollutant for evaluating photocatalytic performance. A systematic material analysis (morphology, chemical environment, optical bandgap energy) of the Ag/TiO₂ photocatalyst powder was carried out, and the influence of material properties on the performance is discussed in detail. The experimental results showed that the decoration of anatase TiO₂ nanoparticles (size between 80 and 100 nm) with 5 nm Ag nanoparticles (1 wt %) induced visible-light absorption and enhanced charge carrier separation. As a result, 0.01 g/L Ag/TiO₂ effectively removed 99% of 0.01 g/L paracetamol in 120 min and exhibited 60% higher photocatalytic removal than pristine TiO₂. Alongside paracetamol degradation, Ag/TiO₂ led to the generation of 1729 μmol H₂ g^-1 h^-1. This proof-of-concept approach for tandem pollutant degradation and hydrogen generation was further evaluated with rare earth metal (lanthanum)- and nonmetal (nitrogen)-doped TiO₂, which also showed a positive response. Using a combination of ab initio calculations and our new theory model, we revealed that the enhanced photocatalytic performance of Ag/TiO₂ was due to the surface Fermi-level change of TiO₂ and lowered surface reaction energy barrier for water pollutant oxidation. This work opens new opportunities for exploiting tandem photocatalytic routes beyond water splitting and understanding the simultaneous reactions in metal-doped metal oxide photocatalyst systems under natural sunlight.

Construction of S-scheme 1D/2D rod-like g-C3N4/V2O5 heterostructure with enhanced sonophotocatalytic degradation for Tetracycline antibiotics

Pharmaceutically active compounds are an emerging water contaminant that resists conventional wastewater treatments. Herein, the sonophotocatalytic degradation of Tetracycline (TC) antibiotics as a model contaminant was carried out over a rod-like g-C₃N₄/V₂O₅ (RCN-VO) nanocomposite. RCN-VO nanocomposite was synthesized via ultrasound-assisted thermal polycondensation method. The results showed that the RCN-VO nanocomposite could completely remove the TC in water within 60 min under simultaneous irradiation of visible light and ultrasound. Moreover, the sonophotocatalytic TC degradation (a synergy index of ∼1.5) was superior to the sum of individual sonocatalytic and photocatalytic degradation using RCN-VO nanocomposite. Besides, the enhanced sonophotocatalytic activity of RCN-VO can be attributed to the 1D/2D nanostructure and the S-scheme heterojunction formation between RCN and VO where the electrons migrated from RCN to VO across the RCN-VO interface. Under irradiation, the built-in electric field, band edge bending and Coulomb interaction can synergistically facilitate the unavailing electron-hole pair recombination. Thereby, the cumulative electron in RCN and holes in VO can actively take part in the redox reaction which generates free radicals and attack the TC molecules. This study provides insight into a novel S-Scheme heterojunction photocatalyst for the removal of various refractory contaminants via sonophotocatalytic degradation.