Urine microbial fuel cells in a semi-controlled environment for onsite urine pre-treatment and electricity production

Review of linear and circular approaches to on-site domestic wastewater treatment: Analysis of research achievements, trends and distance to target

This comprehensive review critically assesses traditional and emerging technologies for domestic wastewater treatment and reuse, focusing on the transition from conventional centralised systems to innovative decentralised approaches. Through an extensive literature search on domestic wastewater systems serving a population equivalent of less than or equal to 10, the study juxtaposes linear and circular methods and highlights their impact on urban water management and the environment. The papers reviewed were classified into five categories: Environmental studies, economic studies, social studies, technological studies, and reviews and policy papers. The analysis was carried out separately for linear and circular approaches within each category. In addition, the maturity of the technology (lab/pilot or full-scale application) was taken into account in the analysis. The research landscape is shown to be evolving towards circular methods that promise sustainability through resource recovery, despite the dominance of linear perspectives. The lack of clear progress in decentralised technologies, the scarcity of circularity assessments and the challenges of urban integration are highlighted. Operational reliability, regulatory compliance and policy support are identified as key barriers to the adoption of decentralised systems. While conventional pollutants and their environmental impacts are well addressed for linear systems, the study of emerging pollutants is in its infancy. Conclusions on the impact of these hazardous pollutants are tentative and cautious. Social and economic studies are mainly based on virtual scenarios, which are useful research tools for achieving sustainability goals. The conceptual frameworks for assessing the social dimension need further refinement to be effective. The paper argues for a balanced integration of centralisation and decentralisation, proposing a dual strategy that emphasizes the development of interoperable technologies. It calls for further research, policy development and widespread implementation to promote decentralised solutions in urban water management and pave the way for sustainable urban ecosystems.

Assessment of microbial population in integrated CW-MFC system and investigation of organics and fecal coliform removal pathway

The current study is focused on understanding the operational mechanism of an integrated constructed wetland-microbial fuel cell (CW-MFC) reactor emphasizing fecal coliform (FC) removal. Few studies are available in the literature investigating the inherent mechanisms of pathogen inactivation in a CW-MFC system. Raw domestic wastewater was treated in three vertical reactors, one planted constructed wetland (R1), one planted CW-MFC (R2), and one unplanted CW-MFC (R3). Spatial analysis of treated effluents showed a considerable amount of organics and fecal coliform removal at the vicinity of the anode in R2. Assessment of the microbial population inside all the reactors revealed that EABs (Firmicutes, Bacteroidetes, and Actinobacteria) were more abundant in R2 compared to R1 and R3. During the activity study, biomass obtained from R2 showed a maximum substrate utilization rate of 1.27 mg COD mgVSS-1 d-1. Kinetic batch studies were carried out for FC removal in all the reactors, and the maximum first order FC removal rate was obtained at the anode of R2 as 2.13 d-1 when operated in closed circuit mode. This value was much higher than the natural die-off rate of FCs in raw wastewater which was 1.16 d-1. Simultaneous bioelectricity monitoring inferred that voltage generation can be correlated to faster FC inactivation, which was probably due to EABs outcompeting other exogenous microbes in a preferable anaerobic environment with the presence of an anode. Reactor R2 was found to be functioning as a symbiotic bio-electrochemical mesocosm.

Development, performance evaluation, and kinetic studies of microbial fuel cell based auto dripping bioelectrochemical reactor (AutoDriBER) for urine treatment

A bioelectrochemical reactor is an assembly, which facilitates energy generation and resource recovery using electrochemically active microorganisms. To maximise energy production from wastewater in this bioreactor system special design is required. Therefore, in the present study, continuous flow auto dripping bioelectrochemical reactors (AutoDriBERs) were developed as a single and multi-electrode assembly for urine treatment. Further, their performance was assessed by connecting reactors in series and parallel arrangements. AutoDriBER configured in series connection showed the highest 93.64 ± 1.57% chemical oxygen demand removal rate with the 1.38 ± 0.64 V voltage and 2.54 W m-3 polarisation power density. The optimum flow rate for maximum voltage production was tested with various models i.e. the linear, exponential, Sweibull-1, and Sweibull-2 models to confirm voltage prediction and its validity. The Linear and exponential models were found best fitted for voltage production with R2 value of 0.999. These findings infer a novel approach toward optimisation of the complex, inexpensive and self-sufficient design for electricity generation from energy-rich urine wastewater in rural areas.

Microbial applications for sustainable space exploration beyond low Earth orbit

With the construction of the International Space Station, humans have been continuously living and working in space for 22 years. Microbial studies in space and other extreme environments on Earth have shown the ability for bacteria and fungi to adapt and change compared to "normal" conditions. Some of these changes, like biofilm formation, can impact astronaut health and spacecraft integrity in a negative way, while others, such as a propensity for plastic degradation, can promote self-sufficiency and sustainability in space. With the next era of space exploration upon us, which will see crewed missions to the Moon and Mars in the next 10 years, incorporating microbiology research into planning, decision-making, and mission design will be paramount to ensuring success of these long-duration missions. These can include astronaut microbiome studies to protect against infections, immune system dysfunction and bone deterioration, or biological in situ resource utilization (bISRU) studies that incorporate microbes to act as radiation shields, create electricity and establish robust plant habitats for fresh food and recycling of waste. In this review, information will be presented on the beneficial use of microbes in bioregenerative life support systems, their applicability to bISRU, and their capability to be genetically engineered for biotechnological space applications. In addition, we discuss the negative effect microbes and microbial communities may have on long-duration space travel and provide mitigation strategies to reduce their impact. Utilizing the benefits of microbes, while understanding their limitations, will help us explore deeper into space and develop sustainable human habitats on the Moon, Mars and beyond.

Halobacterium salinarum NRC-1 Sustains Voltage Production in a Dual-Chambered Closed Microbial Fuel Cell

Sustained bioenergy production from organisms that thrive in high salinity, low oxygen, and low nutrition levels is useful in monitoring hypersaline polluted environments. Microbial fuel cell (MFC) studies utilizing single species halophiles under salt concentrations higher than 1 M and as a closed microbial system are limited. The current study aimed to establish baseline voltage, current, and power density from a dual-chambered MFC utilizing the halophile Halobacterium salinarum NRC-1. MFC performance was determined with two different electrode sizes (5 cm² and 10 cm²), under oscillating and nonoscillating conditions, as well as in a stacked series. A closed dual-chamber MFC system of 100 mL capacity was devised with Halobacterium media (4.3 M salt concentration) as both anolyte and catholyte, with H. salinarum NRC-1 being the anodic organism. The MFC measured electrical output over 7, 14, 28, and 42 days. MFC output increased with 5 cm² sized electrodes under nonoscillating (p < 0.0001) relative to oscillating conditions. However, under oscillating conditions, doubling the electrode size increased MFC output significantly (p = 0.01). The stacked series MFC, with an electrode size of 10 cm², produced the highest power density (1.2672 mW/m²) over 14 days under oscillation. Our results highlight the potentiality of H. salinarum as a viable anodic organism to produce sustained voltage in a closed-MFC system.

Ceramic-microbial fuel cell (C-MFC) for waste water treatment: A mini review

Microbial fuel cell (MFC) is a bio-electrochemical system that utilizes the activity of electrogenic bacteria to generate electricity. When wastewater is used as feed in MFC, its organic constituents are hydrolyzed and oxidized by the bacteria. Hence, this technology is a source of clean electricity while simultaneously treating wastewater. Over the years much research has been done to improve its efficiency as well as to reduce the cost of implementation and functioning. However, scalability and commercialization of this technology still faces several challenges. This mini review discusses the use of ceramics in MFCs using wastewater feed as a method of overcoming the current technological challenges. Ceramics can be used as separators, chassis or electrode, conferring facile chemical and structural stability. The material is low-cost, environment-friendly and easily available. Studies reporting stacked configurations have been mentioned, and those that have reported field studies and technology oriented practical applications. Critical analysis of the scalability of the use of ceramics for the dual purpose of electricity generation as well as wastewater treatment has been done in this review. Future research directives towards potential sustainable commercialization have also been mentioned. C-MFC is a promising technology and the primary aim of this review is to help enhance the knowledge base for the optimization of use of ceramics in MFC to achieve large-scale clean electricity generation and sewage treatment.

Recycling urine for bioelectrochemical hydrogen production using a MoS2 nano carbon coated electrode in a microbial electrolysis cell

In this study, a novel molybdenum disulfide (MoS₂) nano-carbon (NC) coated cathode was developed for hydrogen production in a microbial electrolysis cell (MEC), while treating simulated urine with 2-6 times dilution (conductivity <20 mS cm^-1). MoS₂ nanoparticles were electrodeposited on the NC coated cathodes at -100, -150 and -200 μA cm^-2 and their performances were evaluated in the MEC. The chronopotentiometry (CP) tests showed the improved catalytic activity of MoS₂-NC cathodes with much lower cathode overpotential than non-MoS₂ coated electrodes. The MoS₂-NC200 cathode, electrodeposited at -200 μA cm^-2, showed the maximum hydrogen production rate of 0.152 ± 0.002 m³ H₂ m^-2 d^-1 at 0.9V of E_ap, which is comparable to the previously reported Pt electrodes. It was found that high solution conductivity over 20 mS cm^-1 (>600 mg L^-1 NH₃-N) can adversely affect the biofilm architecture and the bacterial activity at the anode of the MEC. Exoelectrogenic bacteria for this system at the anode were identified as Tissierella (Clostridia) and Bacteroidetes taxa. Maximum ammonia-nitrogen (NH₃-N) and phosphorus (PO₄ ^3--P) removal were 68.7 and 98.6%, respectively. This study showed that the newly fabricated MoS₂-NC cathode can be a cost-effective alternative to the Pt cathode for renewable bioelectrochemical hydrogen production from urine.

Bioelectricity generation from human urine and simultaneous nutrient recovery: Role of Microbial Fuel Cells

Urine is a 'valuable waste' that can be exploited to generate bioelectricity and recover key nutrients for producing NPK-rich biofertilizers. In recent times, improved and innovative waste management technologies have emerged to manage the rapidly increasing environmental pollution and to accomplish the goal of sustainable development. Microbial fuel cells (MFCs) have attracted the attention of environmentalists worldwide to treat human urine and produce power through bioelectrochemical reactions in presence of electroactive bacteria growing on the anode. The bacteria break down the complex organic matter present in urine into simpler compounds and release the electrons which flow through an external circuit generating current at the cathode. Many other useful products are harvested at the end of the process. So, in this review, an attempt has been made to synthesize the information on MFCs fuelled with urine to generate bioelectricity and recover value-added resources (nutrients), and their modifications to enhance productivity. Moreover, configuration and mode of system operation, and factors enhancing the performance of MFCs have been also presented.

Microbial fuel cell performance for aromatic hydrocarbon bioremediation and common effluent treatment plant wastewater treatment with bioelectricity generation through series-parallel connection

Microbial fuel cell (MFC) is an emerging technology which has been immensely investigated for wastewater treatment along with electricity generation. In the present study, the treatment efficiency of MFC was investigated for hydrocarbon containing wastewater by optimizing various parameters of MFC. Mediator-less MFC (1·2 l) was constructed, and its performance was compared with mediated MFC with Escherichia coli as a biocatalyst. MFC with electrode having biofilm proved to be better compared with MFC inoculated with suspended cells. Analysis of increasing surface area of electrode by increasing their numbers indicated increase in COD reduction from 55 to 75%. Catholyte volume was optimized to be 750 ml. Sodium benzoate (0·721 g l^-1 ) and actual common effluent treatment plant (CETP) wastewater as anolyte produced 0·8 and 0·6 V voltage and 89 and 50% COD reduction, respectively, when a novel consortium of four bacterial strains were used. Twenty MFC systems with the developed consortium when electrically connected in series-parallel connection were able to generate 2·3 V and 0·5 mA current. This is the first report demonstrating the application of CETP wastewater in the MFC system, which shows potential of the system towards degradation of complex organic components present in industrial wastewater.

Potential Pitfalls in Wastewater Phosphorus Analysis and How to Avoid Them

Due to the increasing adoption of nutrient discharge regulations, many research groups are stepping into new territory with phosphorus (P) measurements. Accurate reporting of P concentrations in effluent from novel wastewater treatment technologies is critical for protecting both environmental and human health. Analysis of P in wastewater is prone to pitfalls because of the (1) variety of chemical forms of P in wastewater (orthophosphate, condensed P, and organic P), (2) availability of different chemical assays for measuring different P forms, and (3) different conventions in the units for reporting P. Here, we present a case study highlighting how these pitfalls affect analysis and interpretation of P measurements. We show that, when used appropriately, commercially-available kits are indeed accurate tools for evaluating reactive P and total P concentrations. For both standard solutions and real wastewater, we systematically remove steps from the total P protocol to show how protocol deviations affect the results. While standard solutions are important for validating analytical methods, commercially-available wastewater standard solutions only contain P as orthophosphate (reactive P). We therefore demonstrate options for making a mixed-P standard solution containing acid-hydrolyzable and/or organic P compounds that can be used to validate both reactive P and total P assays.

One-pot degradation of urine wastewater by combining simultaneous halophilic nitrification and aerobic denitrification in air-exposed biocathode microbial fuel cells (AEB-MFCs)

Urine wastewater is used as fuel in microbial fuel cells to generate power for several applications. However, the knowledge on the removal efficiencies of pollutants and bacterial composition of electrode biofilm is still lacking. In this study, two air-exposed biocathode microbial fuel cells (AEB-MFCs) were constructed and some nitrogen-removing consortium were inoculated to fabricate multifunctional AEBs for urine treatment and energy recovery. Results demonstrated that urine wastewater can be degraded through one-pot degradation without positive aeration. The removal efficiencies of NH₄⁺-N, total nitrogen and chemical oxygen demand reached 86.8% ± 1.5%, 62.7% ± 2.3%, and 52.7% ± 1.6% respectively. Cyclic voltammetry illustrated several catalytic activities related to C/N metabolism occurred in both biofilms and varied with the operation continuing in a single stable cycle. In addition, the community structure analysis revealed that many active microorganisms, including nitrogen-removing bacteria, heterotrophs, and electrochemically active bacteria were enriched in both electrodes, especially many halophilic nitrifiers/denitrifiers occupied in AEBs and directed the system toward the integrated pathways of halophilic nitrogen removal and energy recovery. This study presented a novel method for the energy conversion and effective degradation of urine, which can serve as a promising technology for urine wastewater treatment.

Laboratory Demonstration and Preliminary Techno-Economic Analysis of an Onsite Wastewater Treatment System

Providing safe and reliable sanitation services to the billions of people currently lacking them will require a multiplicity of approaches. Improving onsite wastewater treatment to standards enabling water reuse would reduce the need to transport waste and fresh water over long distances. Here, we describe a compact, automated system designed to treat the liquid fraction of blackwater for onsite water reuse that combines cross-flow ultrafiltration, activated carbon, and electrochemical oxidation. In laboratory testing, the system consistently produces effluent with 6 ≤ pH ≤ 9, total suspended solids (TSS) < 30 mg L-1, and chemical oxygen demand (COD) < 150 mg L-1. These effluent parameters were achieved across a wide range of values for influent TSS (61-820 mg L-1) and COD (384-1505 mg L-1), demonstrating a robust system for treating wastewater of varying strengths. A preliminary techno-economic analysis (TEA) was conducted to elucidate primary cost drivers and prioritize research and development pathways toward commercial feasibility. The ultrafiltration system is the primary cost driver, contributing to >50% of both the energy and maintenance costs. Several scenario parameters showed an outsized impact on costs relative to technology parameters. Specific technological improvements for future prototype development are discussed.

Impact of Inoculum Type on the Microbial Community and Power Performance of Urine-Fed Microbial Fuel Cells

Bacteria are the driving force of the microbial fuel cell (MFC) technology, which benefits from their natural ability to degrade organic matter and generate electricity. The development of an efficient anodic biofilm has a significant impact on the power performance of this technology so it is essential to understand the effects of the inoculum nature on the anodic bacterial diversity and establish its relationship with the power performance of the system. Thus, this work aims at analysing the impact of 3 different types of inoculum: (i) stored urine, (ii) sludge and (iii) effluent from a working MFC, on the microbial community of the anodic biofilm and therefore on the power performance of urine-fed ceramic MFCs. The results showed that MFCs inoculated with sludge outperformed the rest and reached a maximum power output of 40.38 mW·m^-2_anode (1.21 mW). The power performance of these systems increased over time whereas the power output by MFCs inoculated either with stored urine or effluent decreased after day 30. These results are directly related to the establishment and adaptation of the microbial community on the anode during the assay. Results showed the direct relationship between the bacterial community composition, originating from the different inocula, and power generation within the MFCs.

Technologies for the recovery of nutrients, water and energy from human urine: A review

The global demand for a constant supply of fertilizer is increasing with the booming of the population. Nowadays more focus is given to the recovery and reuse of the nutrients rather than synthesis of the fertilizer from chemicals. Human urine is the best available resource for the primary macronutrients (Nitrogen, Phosphorus and Potassium) for the fertilizer as it contains 10-12 g/L nitrogen, 0.1-0.5 g/L phosphorous and 1.0-2.0 g/L potassium. For the recovery of these nutrients from human urine, various technologies are available which requires source separation and treatment. . In this review, a wide range of the technologies for the treatment of source-separated human urine are covered and discussed in detail. This review has categorized the technologies based on the recovery of nutrients, energy, and water from human urine. Among the various technologies available, Bio-electrochemical technologies are environmental friendly and recovers energy along with the nutrients. Forward Osmosis is the best available technology for the water recovery and for concentrating the nutrients in urine, without or minimal consumption of energy. However, experimental work in this technology is at its prior stage. A single technology is still not sufficient to recover nutrients, water and energy. Therefore, integration of two or more technologies seems essential.

Urine dilution with a synthetic wastewater (Syntho) boosts the electricity production in a bio-electrochemical system powered by un-pretreated human urine

Human urine can be turned into electricity in bio-electrochemical systems. The acclimation of electro-active bacteria to culture media with increasing urine concentrations has led to raising the obtained current densities, which typically followed a Monod-like evolution profile as a function of urine concentration. However, the acclimation protocol has been so far evaluated using pretreated urine samples (fermented or precipitated), not raw (un-pretreated) urine. We demonstrate that, when un-pretreated urine is used, the microbial adaptation to increasingly concentrated urine leads to a current density profile that does not reach a saturation-like phase, but follows a Han/Levenspiel-type trend (bell-shaped). By diluting un-pretreated urine with a synthetic domestic wastewater (Syntho) up to concentrations matching those of the maximum in the Han/Levenspiel-like current profile (15-20% v/v) it is possible to avoid the drop in the electro-active response, generating anodic current densities as high as 3.6 ± 0.2 A.m^-2 (per actual surface area), 35-fold higher than those reached in pure un-pretreated urine.

Development of efficient electroactive biofilm in urine-fed microbial fuel cell cascades for bioelectricity generation

The Microbial fuel cell (MFC) technology harnesses the potential of some naturally occurring bacteria for electricity generation. Digested sludge is commonly used as the inoculum to initiate the process. There are, however, health hazards and practical issues associated with the use of digested sludge depending on its origin as well as the location for system deployment. This work reports the development of an efficient electroactive bacterial community within ceramic-based MFCs fed with human urine in the absence of sludge inoculum. The results show the development of a uniform bacterial community with power output levels equal to or higher than those generated from MFCs inoculated with sludge. In this case, the power generation begins within 2 days of the experimental set-up, compared to about 5 days in some sludge-inoculated MFCs, thus significantly reducing the start-up time. The metagenomics analysis of the successfully formed electroactive biofilm (EAB) shows significant shifts between the microbial ecology of the feeding material (fresh urine) and the developed anodic biofilm. A total of 21 bacteria genera were detected in the urine feedstock whilst up to 35 different genera were recorded in the developed biofilm. Members of Pseudomonas (18%) and Anaerolineaceae (17%) dominate the bacterial community of the fresh urine feed while members of Burkholderiaceae (up to 50%) and Tissierella (up to 29%) dominate the anodic EAB. These results highlight a significant shift in the bacterial community of the feedstock towards a selection and adaptation required for the various electrochemical reactions essential for survival through power generation.

Removal of Hepatitis B virus surface HBsAg and core HBcAg antigens using microbial fuel cells producing electricity from human urine

Microbial electrochemical technology is emerging as an alternative way of treating waste and converting this directly to electricity. Intensive research on these systems is ongoing but it currently lacks the evaluation of possible environmental transmission of enteric viruses originating from the waste stream. In this study, for the first time we investigated this aspect by assessing the removal efficiency of hepatitis B core and surface antigens in cascades of continuous flow microbial fuel cells. The log-reduction (LR) of surface antigen (HBsAg) reached a maximum value of 1.86 ± 0.20 (98.6% reduction), which was similar to the open circuit control and degraded regardless of the recorded current. Core antigen (HBcAg) was much more resistant to treatment and the maximal LR was equal to 0.229 ± 0.028 (41.0% reduction). The highest LR rate observed for HBsAg was 4.66 ± 0.19 h⁻¹ and for HBcAg 0.10 ± 0.01 h⁻¹. Regression analysis revealed correlation between hydraulic retention time, power and redox potential on inactivation efficiency, also indicating electroactive behaviour of biofilm in open circuit control through the snorkel-effect. The results indicate that microbial electrochemical technologies may be successfully applied to reduce the risk of environmental transmission of hepatitis B virus but also open up the possibility of testing other viruses for wider implementation.