A novel polystyrene-poly(hydroxamic acid) interpenetrating polymer network and its adsorption towards rare earth ions

ZIF-8 Used for the Selective Recovery of Heavy Rare Earth Elements from Mining Wastewater

In this study, a sample of 2-methylimidazole zinc salt (ZIF-8) demonstrated high selectivity for the recovery of heavy rare earth elements (REEs) from real rare earth mining wastewater. Results show that the distribution coefficient values of Y3+ (4.02 × 104 mL·g-1), Gd3+ (7.8 × 104 mL·g-1), and Dy3+ (6.8 × 104 mL·g-1) are orders of magnitude higher than those of K+ (359.51 mL·g-1), Mn2+ (266.67 mL·g-1), Ca2+ (396.42 mL·g-1), and Mg2+ (239.48 mL·g-1). Moreover, the desorption efficiency of heavy REEs exceeded 40%. Advanced characterizations and density functional theory (DFT) calculations were utilized to elucidate that the heavy REEs were more likely to bind to the nitrogen atoms of imidazole groups on ZIF-8 compared to non-REEs. Furthermore, the adsorption and desorption of heavy REEs primarily depend on the chemical interaction confirmed by adsorption kinetics, isotherm model, and thermodynamic analysis, which involves the dissociation of water and the formation of REE-O bonds. Finally, the ZIF-8 exhibits a remarkable recovery efficiency of over 40% for heavy REEs in column tests conducted over 7h. The findings reported here provide new insights into the selective recovery of heavy REEs from real mining wastewater.

Carboxymethyl Cellulose/Polyacrylamide/Fe3O4 Magnetic Ion Imprinting Biosorbent for Removal and Recovery of La3

To use resources rationally, the recovery and recycling of rare earth (RE) from industrial sewage have attracted a lot of attention. Herein, a polymer adsorbent CMC/PAM/Fe3O4 (CPF) was synthesized from renewable carboxymethyl cellulose (CMC), polyacrylamide (PAM), and Fe3O4 by the template of La3+ using ion imprinting technology. The CPF was characterized with X-ray diffraction (XRD), IR, X-ray photoelectron spectroscopy (XPS), and scanning electron microscope (SEM), and results show that PAM and CMC can crosslink with each other and form copolymers with Fe3O4 particles dispersing in it. The adsorption properties for the template ions La3+ were fully studied. It is found that CPF exhibited good adsorption performance with an adsorption capacity of 34.6 mg·g-1. Cycling experiments show that CPF still has high efficiency even after 5 cycles. Meanwhile, the desorption rate can reach more than 98%. The low wastage and high adsorption/desorption efficiency would enable CPF to be a good candidate adsorbent for removal/recovery of La3+ from industrial sewage.

Rare Earth Elements Uptake by Synthetic Polymeric and Cellulose-Based Materials: A Review

Contemporary industrial processes and the application of new technologies have increased the demand for rare earth elements (REEs). REEs are critical components for many applications related to semiconductors, luminescent molecules, catalysts, batteries, and so forth. REEs refer to a group of 17 elements that have similar chemical properties. REE mining has increased considerably in the last decade and is starting an REE supply crisis. Recently, the viability of secondary REE sources, such as mining wastewaters and acid mine drainage (AMD), has been considered. A strategy to recover REEs from secondary water-related sources is through the usage of adsorbents and ion exchange materials in preconcentration steps due to their presence in low concentrations. In the search for more sustainable processes, the evaluation of synthetic polymers and natural source materials, such as cellulose-based materials, for REE capture from secondary sources should be considered. In this review, the chemistry, sources, extraction, uses, and environmental impact of REEs are briefly described to finally focus on the study of different adsorption/ion exchange materials and their performance in capturing REEs from water sources, moving from commercially available ion exchange resins to cellulose-based materials.

Adsorption Properties for La(III), Ce(III), and Y(III) with Poly(6-acryloylamino-hexyl hydroxamic acid) Resin

Using polyacrylic resin followed by the substitution reaction with 6-aminohexyl hydroxamic acid, poly(6-acryloylamino-hexyl hydroxamic acid) resin (PAMHA) was successfully synthesized. PAMHA, a spherical resin with the particle size of 0.4 mm, is a novel polyamide hydroxamic acid chelating resin containing acylamino and hydroxamic acid functional groups. A series of influences (pH, contact time, temperature, and the initial concentrations of rare earth ions) were investigated to determine the adsorption properties. The adsorption capacity for La(III), Ce(III), and Y(III) ions were 1.030, 0.962, and 1.450 mmol·g-1, respectively. Thermodynamic and kinetic studies were also carried out to show that the uptake of rare earth ions onto PAMHA fitted well the pseudo-second-order model and Langmuir isotherm, and the adsorption process was spontaneous endothermic. In addition, desorption of rare earth ions was achieved by using 2 mol·L-1 HNO3 and desorption efficiencies for La(III), Ce(III), and Y(III) ions were 98.4, 99.1, and 98.8%, respectively. Properties of PAMHA resin were characterized by scanning electron microscope (SEM), Fourier transform infrared spectrometry (FTIR), and X-ray photoelectron spectrometer (XPS). The results showed that there was coordination between the rare earth ions with PAMHA and rare metal ions were chemically adsorbed on the surface of the PAMHA.