Down- and up-conversion processes in Nd3+/Yb3+ co-doped sodium calcium silicate glasses with concomitant Yb2+ assessment

Photoluminescence Confocal Mapping of a Novel Nd3+/Yb3+: Zn2SiO4 Composite thin film on Si (100) Substrate Utilizing a 980 nm Pumping Source

A fixed Nd3+ and varied Yb3+ ion concentration were incorporated in a Zinc-Silicate (SZNYX) composite solution using ex-situ sol-gel solution to fabricate a novel thin film (TF) on Si (100)-substrate. The upconversion luminescence (UCL) spectra of the thin films were measured under 980 nm laser excitation, with the most optimized result for Yb3+ ion concentration of 1.5 mol%. Additionally, a 2-D photoluminescence (PL) confocal mapping of the SZNY15-TF material confirmed uniform PL distribution throughout the space under the same excitation wavelength. Structural characterization via XRD revealed the tetragonal Zn2SiO4 nano-crystalline nature of the film at three distinct annealing temperatures. Morphological characterization using the Field-emission scanning electron Microscope (FESEM) coupled with energy dispersion spectrometer (EDS) affirmed the nanoflower structure and the purity of doping purity in the samples, respectively. These findings collectively confirm the promising UCL properties of the SZNYX-TF samples, suggesting potential applications in photonic.

Er 3 + , Nd 3 + , Tm 3 + : Up-conversion in Lead Borophosphate Glasses for Visible Emission

To investigate the role of PbO as a former or a modifier and effect of its compositional variation on the physical, structural and optical properties, lithium lead borophosphate glasses were synthesized by melt quenching technique. For the physical properties of the prepared glasses, density was measured using the Archimedes principle, which showed an increasing trend from 3.13 to 4.51 with increasing concentrations of lead oxide. Additionally, other physical parameters were calculated based on the measured density values. The structural analysis were performed through X-ray diffraction and Fourier transform infrared spectroscopy. Lack of sharp and characteristic peaks in the XRD spectra confirmed the non crystalline nature of the prepared glasses. Structural units due to PbO,P 2 O 5 andB 2 O 3 were identified from the FTIR spectra. Ultraviolet-visible absorption spectroscopy was performed for optical properties and increase in the indirect band gap from 4.80 eV to 4.90 eV was observed. One glass sample was chosen for doping of erbium, neodymium, thulium and ytterbium, for study of their up-conversion properties. The UV-Vis-NIR absorption spectra of erbium, neodymium, and thulium samples were recorded, and wavelength of 980 nm was chosen for excitation. Ytterbium, acting as a sensitizer, facilitated the conversion of the excitation infrared light into visible light. Upon excitation at 980 nm, the erbium-doped sample emitted light at 520 nm, 547 nm, and 665 nm, utilizing excited state up-conversion (ESA) and energy transfer up-conversion (ETU) mechanisms. Similarly, the neodymium-doped sample emitted at 542 nm, 602 nm, and 660 nm, while the thulium-doped sample emitted at 488 nm, 521 nm, and 649 nm. The results of up-conversion indicate that rare earth-doped lithium lead borophosphate glasses are excellent hosts for up-conversion processes.

Luminescence properties and energy transfer of Nd3+- Er3+/ Nd3+-Pr3+ co-doped LFP glasses system

The motivation for this research is that the emission spectra using directly pumped laser diodes have not yet been found. We want to explore the luminescence properties of a co-doped laser material utilizing a diode laser as an optical pump. The research method used standard melt-quench and was stimulated by a laser diode (808 and 980 nm). The double doped of Nd3+- Er3+/Nd3+-Pr3+ ions with glasses system of lithium-fluorophosphate (LFP) had a strong band emission at 1056 nm, which transitioned at 4F3/2 → 4I11/2 and showed a drop in intensity from co-doping with Er3+ and Pr3+ ions. The fluorescence width at half maximum (FWHM) of the glasses is calculated to identify whether the sample may be used as a laser application. The FWHM values are found to be 22-28 nm. Decay time values were shown to decrease with increasing concentrations of Er3+ and Pr3+ ions and were used for energy transfer calculations. The Quantum Yields (QYs), efficiency in the transfer of energy and the possibility transfer energy were measured and calculated that confirm the possibility of energy transfer from Nd3+ to Er3+ and Pr3+ ions. Since, the emission spectrum at 1535 nm was found, this is a good reason for it to be used as an optical device.