MASDET-A fast and user-friendly multiplatform software for mass determination by dark-field electron microscopy

Revealing the assembly of filamentous proteins with scanning transmission electron microscopy

Filamentous proteins are responsible for the superior mechanical strength of our cells and tissues. The remarkable mechanical properties of protein filaments are tied to their complex molecular packing structure. However, since these filaments have widths of several to tens of nanometers, it has remained challenging to quantitatively probe their molecular mass density and three-dimensional packing order. Scanning transmission electron microscopy (STEM) is a powerful tool to perform simultaneous mass and morphology measurements on filamentous proteins at high resolution, but its applicability has been greatly limited by the lack of automated image processing methods. Here, we demonstrate a semi-automated tracking algorithm that is capable of analyzing the molecular packing density of intra- and extracellular protein filaments over a broad mass range from STEM images. We prove the wide applicability of the technique by analyzing the mass densities of two cytoskeletal proteins (actin and microtubules) and of the main protein in the extracellular matrix, collagen. The high-throughput and spatial resolution of our approach allow us to quantify the internal packing of these filaments and their polymorphism by correlating mass and morphology information. Moreover, we are able to identify periodic mass variations in collagen fibrils that reveal details of their axially ordered longitudinal self-assembly. STEM-based mass mapping coupled with our tracking algorithm is therefore a powerful technique in the characterization of a wide range of biological and synthetic filaments.

Quantitative STEM imaging of electron beam induced mass loss of epoxy resin sections

In sample preparation of biological samples for electron microscopy, many types of embedding media are widely used. Unfortunately, none of them is perfectly resistant to beam induced damage. The article is focused on mass loss measuring of pure epoxy resin EMbed 812 that replaced Epon - the most widely used embedding resin for biological electron microscopy, in a form of ultrathin sections with thicknesses ranging from 30 to 100 nm. The STEM imaging was performed in a quantitative way which allowed us to estimate the mass loss directly up to the total dose of 3000 e^-/nm². For data acquisition we used SEM equipped with a commercial STEM detector working at a relatively low acceleration voltage of 30 kV. In this study we estimated the influence of various factors which can affect the endurance of the epoxy resin EMbed 812 ultrathin sections under an electron beam, such as the sample aging, differences between storing the samples in forms of ultrathin sections and whole blocks, ultrathin sections thicknesses, temperature of the sample, probe current, and one or two-sided carbon coating of ultrathin sections. The aim of this work is to investigate beam induced mass loss at electron energies of SEM and find out how to reduce the mass loss.

Amyloid Fibril Polymorphism: Almost Identical on the Atomic Level, Mesoscopically Very Different

Amyloid polymorphism of twisted and straight β-endorphin fibrils was studied by negative-stain transmission electron microscopy, scanning transmission electron microscopy, and solid-state nuclear magnetic resonance spectroscopy. Whereas fibrils assembled in the presence of salt formed flat, striated ribbons, in the absence of salt they formed mainly twisted filaments. To get insights into their structural differences at the atomic level, 3D solid-state NMR spectra of both fibril types were acquired, allowing the detection of the differences in chemical shifts of ¹³C and ¹⁵N atoms in both preparations. The spectral fingerprints and therefore the chemical shifts are very similar for both fibril types. This indicates that the monomer structure and the molecular interfaces are almost the same but that these small differences do propagate to produce flat and twisted morphologies at the mesoscopic scale. This finding is in agreement with both experimental and theoretical considerations on the assembly of polymers (including amyloids) under different salt conditions, which attribute the mesoscopic difference of flat versus twisted fibrils to electrostatic intermolecular repulsions.

Principles Governing the Self-Assembly of Coiled-Coil Protein Nanoparticles

Self-assembly refers to the spontaneous organization of individual building blocks into higher order structures. It occurs in biological systems such as spherical viruses, which utilize icosahedral symmetry as a guiding principle for the assembly of coat proteins into a capsid shell. In this study, we characterize the self-assembling protein nanoparticle (SAPN) system, which was inspired by such viruses. To facilitate self-assembly, monomeric building blocks have been designed to contain two oligomerization domains. An N-terminal pentameric coiled-coil domain is linked to a C-terminal coiled-coil trimer by two glycine residues. By combining monomers with inherent propensity to form five- and threefold symmetries in higher order agglomerates, the supposition is that nanoparticles will form that exhibit local and global symmetry axes of order 3 and 5. This article explores the principles that govern the assembly of such a system. Specifically, we show that the system predominantly forms according to a spherical core-shell morphology using a combination of scanning transmission electron microscopy and small angle neutron scattering. We introduce a mathematical toolkit to provide a specific description of the possible SAPN morphologies, and we apply it to characterize all particles with maximal symmetry. In particular, we present schematics that define the relative positions of all individual chains in the symmetric SAPN particles, and provide a guide of how this approach can be generalized to nonspherical morphologies, hence providing unprecedented insights into their geometries that can be exploited in future applications.

A Versatile High-Vacuum Cryo-transfer System for Cryo-microscopy and Analytics

Cryogenic microscopy methods have gained increasing popularity, as they offer an unaltered view on the architecture of biological specimens. As a prerequisite, samples must be handled under cryogenic conditions below their recrystallization temperature, and contamination during sample transfer and handling must be prevented. We present a high-vacuum cryo-transfer system that streamlines the entire handling of frozen-hydrated samples from the vitrification process to low temperature imaging for scanning transmission electron microscopy and transmission electron microscopy. A template for cryo-electron microscopy and multimodal cryo-imaging approaches with numerous sample transfer steps is presented.

MpUL-multi: Software for Calculation of Amyloid Fibril Mass per Unit Length from TB-TEM Images

Structure determination for amyloid fibrils presents many challenges due to the high variability exhibited by fibrils and heterogeneous morphologies present, even in single samples. Mass per unit length (MPL) estimates can be used to differentiate amyloid fibril morphologies and provide orthogonal evidence for helical symmetry parameters determined by other methods. In addition, MPL data can provide insight on the arrangement of subunits in a fibril, especially for more complex fibrils assembled with multiple parallel copies of the asymmetric unit or multiple twisted protofilaments. By detecting only scattered electrons, which serve as a relative measure of total scattering, and therefore protein mass, dark field imaging gives an approximation of the total mass of protein present in any given length of fibril. When compared with a standard of known MPL, such as Tobacco Mosaic Virus (TMV), MPL of the fibrils in question can be determined. The program suite MpUL-multi was written for rapid semi-automated processing of TB-TEM dark field data acquired using this method. A graphical user interface allows for simple designation of fibrils and standards. A second program averages intensities from multiple TMV molecules for accurate standard determination, makes multiple measurements along a given fibril, and calculates the MPL.

Very high-density lipoprotein and vitellin as carriers of novel biliverdins IXα with a farnesyl side-chain presumably derived from heme A in Spodoptera littoralis

Bilins in complex with specific proteins play key roles in many forms of life. Biliproteins have also been isolated from insects; however, structural details are rare and possible functions largely unknown. Recently, we identified a high-molecular weight biliprotein from a moth, Cerura vinula, as an arylphorin-type hexameric storage protein linked to a novel farnesyl biliverdin IXα; its unusual structure suggests formation by cleavage of mitochondrial heme A. In the present study of another moth, Spodoptera littoralis, we isolated two different biliproteins. These proteins were identified as a very high-density lipoprotein (VHDL) and as vitellin, respectively, by mass spectrometric sequencing. Both proteins are associated with three different farnesyl biliverdins IXα: the one bilin isolated from C. vinula and two new structurally closely related bilins, supposed to be intermediates of heme A degradation. The different bilin composition of the two biliproteins suggests that the presumed oxidations at the farnesyl side-chain take place mainly during egg development. The egg bilins are supposedly transferred from hemolymph VHDL to vitellin in the female. Both biliproteins show strong induced circular dichroism activity compatible with a predominance of the M-conformation of the bilins. This conformation is opposite to that of the arylphorin-type biliprotein from C. vinula. Electron microscopy of the VHDL-type biliprotein from S. littoralis provided a preliminary view of its structure as a homodimer and confirmed the biochemically determined molecular mass of ∼350 kDa. Further, images of S. littoralis hexamerins revealed a 2 × 3 construction identical to that known from the hexamerin from C. vinula.

Optimizing the design of protein nanoparticles as carriers for vaccine applications

Successful vaccine development remains a huge challenge for infectious diseases such as malaria, HIV and influenza. As a novel way to present antigenic epitopes to the immune system, we have developed icosahedral self-assembling protein nanoparticles (SAPNs) to serve as a prototypical vaccine platform for infectious diseases. Here we examine some biophysical factors that affect the self-assembly of these nanoparticles, which have as basic building blocks coiled-coil oligomerization domains joined by a short linker region. Relying on in silico computer modeling predictions, we selected five different linker regions from the RCSB protein database that connect oligomerization domains, and then further studied the self-assembly and stability of in vitro produced nanoparticles through biophysical characterization of formed particles. One design in particular, T2i88, revealed excellent self-assembly and homogeneity thus paving the way toward a more optimized nanoparticle for vaccine applications.

From the Clinical Editor

Despite the widespread use of vaccines worldwide, successful development of vaccines against some diseases remains a challenge still. In this article, the authors investigated the physic-chemical and biological properties of icosahedral self-assembling protein nanoparticles (SAPNs), which mimic viral particles, in order to utilize this technology as potential platform for future design of vaccines.

Mass mapping of amyloid fibrils in the electron microscope using STEM imaging

Scanning transmission electron microscopy (STEM) in the dark-field mode of operation is a technique regularly used to record high-contrast images from isolated macromolecular assemblies at nanometer resolution. Dark-field STEM images are unique in that they can be readily quantified to provide information on the mass of individual molecular complexes. Importantly, because STEM images contain simultaneous mass and overall molecular shape information, the concept of "mass mapping" can be realized to provide distinctive measurements of the mass per area of planar assemblies or the mass per length of filamentous structures. In this chapter we describe how the STEM technique can be applied to generate characteristic measurements of mass per length from isolated Alzheimer's amyloid fibrils.

3D imaging and quantitative analysis of small solubilized membrane proteins and their complexes by transmission electron microscopy

Inherently unstable, detergent-solubilized membrane protein complexes can often not be crystallized. For complexes that have a mass of >300 kDa, cryo-electron microscopy (EM) allows their three-dimensional (3D) structure to be assessed to a resolution that makes secondary structure elements visible in the best case. However, many interesting complexes exist whose mass is below 300 kDa and thus need alternative approaches. Two methods are reviewed: (i) Mass measurement in a scanning transmission electron microscope, which has provided important information on the stoichiometry of membrane protein complexes. This technique is applicable to particulate, filamentous and sheet-like structures. (ii) 3D-EM of negatively stained samples, which determines the molecular envelope of small membrane protein complexes. Staining and dehydration artifacts may corrupt the quality of the 3D map. Staining conditions thus need to be optimized. 3D maps of plant aquaporin SoPIP2;1 tetramers solubilized in different detergents illustrate that the flattening artifact can be partially prevented and that the detergent itself contributes significantly. Another example discussed is the complex of G protein-coupled receptor rhodopsin with its cognate G protein transducin.

Optimizing the refolding conditions of self-assembling polypeptide nanoparticles that serve as repetitive antigen display systems

Nanoparticles show great promise as potent vaccine candidates since they are readily taken up by the antigen presenting cells of the immune system. The particle size and the density of the B cell epitopes on the surface of the particles greatly influences the strength of the humoral immune response. We have developed a novel type of nanoparticle composed of peptide building blocks (Raman et al., 2006) and have used such particles to design vaccines against malaria and SARS (Kaba et al., 2009, Pimentel et al., 2009). Here we investigate the biophysical properties and the refolding conditions of a prototype of these self-assembling polypeptide nanoparticles (SAPNs). SAPNs are formed from a peptide containing a pentameric and a trimeric coiled-coil domain. At near physiological conditions the peptide self-assembles into about 27 nm, roughly spherical SAPNs. The average size of the SAPNs increases with the salt concentration. The optimal pH for their formation is between 7.5 and 8.5, while aggregation occurs at lower and higher values. A glycerol concentration of about 5% v/v is required for the formation of SAPNs with regular spherical shapes. These studies will help to optimize the immunological properties of SAPNs.

Rhodopsin-transducin heteropentamer: three-dimensional structure and biochemical characterization

The process of vision is initiated when the G protein-coupled receptor, rhodopsin (Rho), absorbs a photon and transitions to its activated Rho(∗) form. Rho(∗) binds the heterotrimeric G protein, transducin (G(t)) inducing GDP to GTP exchange and G(t) dissociation. Using nucleotide depletion and affinity chromatography, we trapped and purified the resulting nucleotide-free Rho(∗)·G(t) complex. Quantitative SDS-PAGE suggested a 2:1 molar ratio of Rho(∗) to G(t) in the complex and its mass determined by scanning transmission electron microscopy was 221±12kDa. A 21.6Å structure was calculated from projections of negatively stained Rho(∗)·G(t) complexes. The molecular envelope thus determined accommodated two Rho molecules together with one G(t) heterotrimer, corroborating the heteropentameric structure of the Rho(∗)·G(t) complex.

A structural model for apolipoprotein C-II amyloid fibrils: experimental characterization and molecular dynamics simulations

The self-assembly of specific proteins to form insoluble amyloid fibrils is a characteristic feature of a number of age-related and debilitating diseases. Lipid-free human apolipoprotein C-II (apoC-II) forms characteristic amyloid fibrils and is one of several apolipoproteins that accumulate in amyloid deposits located within atherosclerotic plaques. X-ray diffraction analysis of aligned apoC-II fibrils indicated a simple cross-β-structure composed of two parallel β-sheets. Examination of apoC-II fibrils using transmission electron microscopy, scanning transmission electron microscopy, and atomic force microscopy indicated that the fibrils are flat ribbons composed of one apoC-II molecule per 4.7-Å rise of the cross-β-structure. Cross-linking results using single-cysteine substitution mutants are consistent with a parallel in-register structural model for apoC-II fibrils. Fluorescence resonance energy transfer analysis of apoC-II fibrils labeled with specific fluorophores provided distance constraints for selected donor-acceptor pairs located within the fibrils. These findings were used to develop a simple 'letter-G-like' β-strand-loop-β-strand model for apoC-II fibrils. Fully solvated all-atom molecular dynamics (MD) simulations showed that the model contained a stable cross-β-core with a flexible connecting loop devoid of persistent secondary structure. The time course of the MD simulations revealed that charge clusters in the fibril rearrange to minimize the effects of same-charge interactions inherent in parallel in-register models. Our structural model for apoC-II fibrils suggests that apoC-II monomers fold and self-assemble to form a stable cross-β-scaffold containing relatively unstructured connecting loops.

Multilamellar spherical particles as potential sources of excessive light scattering in human age-related nuclear cataracts

The goal of this project was to determine the relative refractive index (RI) of the interior of multilamellar bodies (MLBs) compared to the adjacent cytoplasm within human nuclear fiber cells. MLBs have been characterized previously as 1-4 μm diameter spherical particles covered by multiple lipid bilayers surrounding a cytoplasmic core of variable density. Age-related nuclear cataracts have more MLBs than transparent donor lenses and were predicted to have high forward scattering according to Mie scattering theory, assuming different RIs for the MLB and cytoplasm. In this study quantitative values of relative RI were determined from specific MLBs in electron micrographs of thin sections and used to calculate new Mie scattering plots. Fresh lenses were Vibratome sectioned, immersion fixed and en bloc stained with osmium tetroxide and uranyl acetate, or uranyl acetate alone, prior to dehydration and embedding in epoxy or acrylic resins. Thin sections 70 nm thick were cut on a diamond knife and imaged without grid stains at 60 kV using a CCD camera on a transmission electron microscope (TEM). Integrated intensities in digital electron micrographs were related directly to protein density, which is linearly related to RI for a given substance. The RI of the MLB interior was calculated assuming an RI value of 1.42 for the cytoplasm from the literature. Calculated RI values for MLBs ranged from 1.35 to 1.53. Thus, some MLBs appeared to have interior protein densities similar to or less than the adjacent cytoplasm whereas others had significantly higher densities. The higher density MLBs occurred preferentially in older and more advanced cataracts suggesting a maturation process. The bilayer coats were more often observed in MLBs from transparent donors and early stage cataracts indicating that bilayer loss was part of the MLB maturation, producing large low-density spaces around dense MLB cores. These spaces were frequently observed in advanced cataracts from India as large low-density crescents and annular rings. Predicted scattering from Mie plots using particles with dense cores and low-density rims was higher than reported previously, although the most important factor was the relative RI, not the MLB coat or lack thereof. In conclusion, the measurements confirm the high protein density and RI of some MLB interiors compared to adjacent cytoplasm. This high RI ratio used in the Mie calculations suggests that for 2000 MLBs/mm³, about half that reported for early stage nuclear cataracts from the US, the forward scattering could be more than 30% of the incident light. Therefore, the extent of forward scattering and its influence on macular visual acuity could be important components of ophthalmological evaluations of cataract patients.

Amyloid structure and assembly: insights from scanning transmission electron microscopy

Amyloid fibrils are filamentous protein aggregates implicated in several common diseases such as Alzheimer's disease and type II diabetes. Similar structures are also the molecular principle of the infectious spongiform encephalopathies such as Creutzfeldt-Jakob disease in humans, scrapie in sheep, and of the so-called yeast prions, inherited non-chromosomal elements found in yeast and fungi. Scanning transmission electron microscopy (STEM) is often used to delineate the assembly mechanism and structural properties of amyloid aggregates. In this review we consider specifically contributions and limitations of STEM for the investigation of amyloid assembly pathways, fibril polymorphisms and structural models of amyloid fibrils. This type of microscopy provides the only method to directly measure the mass-per-length (MPL) of individual filaments. Made on both in vitro assembled and ex vivo samples, STEM mass measurements have illuminated the hierarchical relationships between amyloid fibrils and revealed that polymorphic fibrils and various globular oligomers can assemble simultaneously from a single polypeptide. The MPLs also impose strong constraints on possible packing schemes, assisting in molecular model building when combined with high-resolution methods like solid-state nuclear magnetic resonance (NMR) and electron paramagnetic resonance (EPR).

Molecular architecture of Streptococcus pneumoniae TIGR4 pili

Although the pili of Gram-positive bacteria are putative virulence factors, little is known about their structure. Here we describe the molecular architecture of pilus-1 of Streptococcus pneumoniae, which is a major cause of morbidity and mortality worldwide. One major (RrgB) and two minor components (RrgA and RrgC) assemble into the pilus. Results from TEM and scanning transmission EM show that the native pili are approximately 6 nm wide, flexible filaments that can be over 1 microm long. They are formed by a single string of RrgB monomers and have a polarity defined by nose-like protrusions. These protrusions correlate to the shape of monomeric RrgB-His, which like RrgA-His and RrgC-His has an elongated, multi-domain structure. RrgA and RrgC are only present at the opposite ends of the pilus shaft, compatible with their putative roles as adhesin and anchor to the cell wall surface, respectively. Our structural analyses provide the first direct experimental evidence that the native S. pneumoniae pilus shaft is composed exclusively of covalently linked monomeric RrgB subunits oriented head-to-tail.

Assembly of Kch, a putative potassium channel from Escherichia coli

Attempts to explore the structure and function of Kch, a putative potassium channel of Escherichia coli have yielded varying results; potassium-associated functions have been found in vivo but not in vitro. Here the kch gene is shown to produce two proteins, full-length Kch and the large C-terminal cytosolic domain (the RCK domain). Further, these two proteins are associated at the initial stages of purification. Previous structural studies of full-length Kch claim that the isolated protein forms large aggregates that are not suitable for analysis. The results presented here show that the purified protein sample, although heterogeneous, has one major population with a mass of about 400kDa, implying the presence of two Kch tetramers in a complex form. A three dimensional reconstruction at 25A based on electron microscopy data from negatively stained particles, revealed a 210A long and 95A wide complex in which the two tetrameric Kch units are linked by their RCK domains, giving rise to a large central ring of density. The formation of this dimer of tetramers on expression or during purification, may explain why attempts to reconstitute Kch into liposomes for activity measurements have failed.

Globular tetramers of beta(2)-microglobulin assemble into elaborate amyloid fibrils

Amyloid fibrils are ordered polymers in which constituent polypeptides adopt a non-native fold. Despite their importance in degenerative human diseases, the overall structure of amyloid fibrils remains unknown. High-resolution studies of model peptide assemblies have identified residues forming cross-β-strands and have revealed some details of local β-strand packing. However, little is known about the assembly contacts that define the fibril architecture. Here we present a set of three-dimensional structures of amyloid fibrils formed from full-length β₂-microglobulin, a 99-residue protein involved in clinical amyloidosis. Our cryo-electron microscopy maps reveal a hierarchical fibril structure built from tetrameric units of globular density, with at least three different subunit interfaces in this homopolymeric assembly. These findings suggest a more complex superstructure for amyloid than hitherto suspected and prompt a re-evaluation of the defining features of the amyloid fold.