Nitrogen depletion in Arthrospira sp. PCC 8005, an ultrastructural point of view

Response of Arthrospira platensis to nitrogen depletion and the effect of aqueous extracts on tumor and non-tumor cells

The microalgae Arthrospira platensis (AP), commonly known as Spirulina, has gained widespread popularity as a food supplement in recent years. AP is particularly abundant in protein, B vitamins, iron, magnesium, potassium, and various antioxidants. In this study we aimed to evaluate the effect of nitrate limitation in the AP culture medium on AP growth and composition. In addition, the cytotoxicity of the respective aqueous AP extracts on three different mammalian cell-lines (HepG2, Caco2, L929) was tested. AP was cultivated over a 10-day period under nitrogen-rich (Nrich: 1.8 g/L) and nitrogen-deficient (Nlimited: 0.2-0.4 g/L) conditions in two separate experiments, each with three biological replicates (three bioreactors). Throughout the cultivation, the kinetic progress of dry biomass, pH, pigment content, the levels of essential elements (sulphur, phosphate, and nitrate) and the composition of elements in the harvested biomass was determined. While the biomass slightly but significantly differed, the phycocyanin concentration differed considerably (around 10-fold higher in the Nrich medium, p < 0.05). Aqueous extracts of the Nrich medium had significantly stronger effects on the cell membrane integrity and the metabolic activity of the cells than extracts of the Nlimited medium. Particularly was the finding that AP had a significantly stronger toxic effect on the two tumour cell types (HepG2, Caco2) than on the non-tumour cells (L929). This study underscores the significance of nitrate content in the cultivation media of AP.

Optimal Laboratory Cultivation Conditions of Limnospira maxima for Large-Scale Production

Cultivating Limnospira maxima, renowned for its abundant proteins and valuable pigments, faces substantial challenges rooted in the limited understanding of its optimal growth parameters, associated high costs, and constraints in the procurement of traditional nitrogen sources, particularly NaNO3. To overcome these challenges, we conducted a comprehensive 4 × 3 factorial design study. Factors considered included white, red, blue, and yellow light spectra, along with nitrogen sources NaNO3 and KNO3, as well as a nitrogen-free control, for large-scale implementation. Optimal growth, measured by Optical Density, occurred with white and yellow light combined with KNO3 as the nitrogen source. These conditions also increased dry weight and Chl-a content. Cultures with nitrogen deprivation exhibited high values for these variables, attributed to carbon accumulation in response to nitrogen scarcity. Phycocyanin, a crucial pigment for nutrition and industry, reached its highest levels in cultures exposed to white light and supplemented with KNO3, with an impressive content of 384.11 g kg-1 of dry weight. These results highlight the efficacy and cost-efficiency of using a combination of white light and KNO3 for large-scale L. maxima cultivation. This strategy offers promising opportunities to address global food security challenges and enhance the production of industrially relevant pigments.

Characterization and Homology Modeling of Catalytically Active Recombinant PhaCAp Protein from Arthrospira platensis

Polyhydroxybutyrate (PHB) is a biocompatible and biodegradable polymer that has the potential to replace fossil-derived polymers. The enzymes involved in the biosynthesis of PHB are β-ketothiolase (PhaA), acetoacetyl-CoA reductase (PhaB), and PHA synthase (PhaC). PhaC in Arthrospira platensis is the key enzyme for PHB production. In this study, the recombinant E. cloni^®10G cells harboring A. platensis phaC (rPhaC_Ap) was constructed. The overexpressed and purified rPhaC_Ap with a predicted molecular mass of 69 kDa exhibited V_max, K_m, and k_cat values of 24.5 ± 2 μmol/min/mg, 31.3 ± 2 µM and 412.7 ± 2 1/s, respectively. The catalytically active rPhaC_Ap was a homodimer. The three-dimensional structural model for the asymmetric PhaC_Ap homodimer was constructed based on Chromobacterium sp. USM2 PhaC (PhaC_Cs). The obtained model of PhaC_Ap revealed that the overall fold of one monomer was in the closed, catalytically inactive conformation whereas the other monomer was in the catalytically active, open conformation. In the active conformation, the catalytic triad residues (Cys151-Asp310-His339) were involved in the binding of substrate 3HB-CoA and the CAP domain of PhaC_Ap involved in the dimerization.

Modification of Some Structural and Functional Parameters of Living Culture of Arthrospira platensis as the Result of Selenium Nanoparticle Biosynthesis

Selenium nanoparticles are attracting the attention of researchers due to their multiple applications, including medicine. The biosynthesis of selenium nanoparticles has become particularly important due to the environmentally friendly character of the process and special properties of the obtained particles. The possibility of performing the biosynthesis of selenium nanoparticles via the living culture of Arthrospira platensis starting from sodium selenite was studied. The bioaccumulation capacity of the culture, along with changes in the main biochemical parameters of the biomass, the ultrastructural changes in the cells during biosynthesis and the change in the expression of some genes involved in stress response reactions were determined. Protein, lipid and polysaccharide fractions were obtained from the biomass grown in the presence of sodium selenite. The formation of selenium nanoparticles in the protein fraction was demonstrated. Thus, Arthrospira platensis culture can be considered a suitable matrix for the biosynthesis of selenium nanoparticles.

Growth and photosynthetic performance of Nostoc linckia (formerly N. calcicola) cells grown in BG11 and BG110 media

The biotechnological potential of Nostoc linckia as a biofertilizer and source of bioactive compounds makes it important to study its growth physiology and productivity. Since nitrogen is a fundamental component of N. linckia biomass, we compared the growth and biochemical composition of cultures grown in BG11 (i.e., in the presence of nitrate) and BG11₀ (in the absence of nitrate). Cultures grown in BG11 accumulated more cell biomass reaching a dry weight of 1.65 ± 0.06 g L^-1, compared to 0.92 ± 0.01 g L^-1 in BG11₀ after 240 h of culture. Biomass productivity was higher in culture grown in BG11 medium (average 317 ± 38 mg L^-1 day^-1) compared to that attained in BG11₀ (average 262 ± 37 mg L^-1 day^-1). The chlorophyll content of cells grown in BG11 increased continuously up to (39.0 ± 1.3 mg L^-1), while in BG11₀ it increased much more slowly (13.6 ± 0.8 mg L^-1). Biomass grown in BG11 had higher protein and phycobilin contents. However, despite the differences in biochemical composition and pigment concentration, between BG11 and BG11₀ cultures, both their net photosynthetic rates and maximum quantum yields of the photosystem II resulted in similar.

Sustainable production of polyhydroxybutyrate from autotrophs using CO2 as feedstock: Challenges and opportunities

Due to industrialization and rapid increase in world population, the global energy consumption has increased dramatically. As a consequence, there is increased consumption of fossil fuels, leading to a rapid increase in CO₂ concentration in the atmosphere. This accumulated CO₂ can be efficiently used by autotrophs as a carbon source to produce chemicals and biopolymers. There has been increasing attention on the production of polyhydroxybutyrate (PHB), a biopolymer, with focus on reducing the production cost. For this, cheaper renewable feedstocks, molecular tools, including metabolic and genetic engineering have been explored to improve microbial strains along with process engineering aspects for scale-up of PHB production. This review discusses the recent advents on the utilization of CO₂ as feedstock especially by engineered autotrophs, for sustainable production of PHB. The review also discusses the innovations in cultivation technology and process monitoring while understanding the underlying mechanisms for CO₂ to biopolymer conversion.

Challenges and Perspectives of Polyhydroxyalkanoate Production From Microalgae/Cyanobacteria and Bacteria as Microbial Factories: An Assessment of Hybrid Biological System

Polyhydroxyalkanoates (PHAs) are the biopolymer of choice if we look for a substitute of petroleum-based non-biodegradable plastics. Microbial production of PHAs as carbon reserves has been studied for decades and PHAs are gaining attention for a wide range of applications in various fields. Still, their uneconomical production is the major concern largely attributed to high cost of organic substrates for PHA producing heterotrophic bacteria. Therefore, microalgae/cyanobacteria, being photoautotrophic, prove to have an edge over heterotrophic bacteria. They have minimal metabolic requirements, such as inorganic nutrients (CO2, N, P, etc.) and light, and they can survive under adverse environmental conditions. PHA production under photoautotrophic conditions has been reported from cyanobacteria, the only candidate among prokaryotes, and few of the eukaryotic microalgae. However, an efficient cultivation system is still required for photoautotrophic PHA production to overcome the limitations associated with (1) stringent management of closed photobioreactors and (2) optimization of monoculture in open pond culture. Thus, a hybrid system is a necessity, involving the participation of microalgae/cyanobacteria and bacteria, i.e., both photoautotrophic and heterotrophic components having mutual interactive benefits for each other under different cultivation regime, e.g., mixotrophic, successive two modules, consortium based, etc. Along with this, further strategies like optimization of culture conditions (N, P, light exposure, CO2 dynamics, etc.), bioengineering, efficient downstream processes, and the application of mathematical/network modeling of metabolic pathways to improve PHA production are the key areas discussed here. Conclusively, this review aims to critically analyze cyanobacteria as PHA producers and proposes economically sustainable production of PHA from microbial autotrophs and heterotrophs in "hybrid biological system."

Disruption of the Gene trx-m1 Impedes the Growth of Anabaena sp. PCC 7120 under Nitrogen Starvation

Cyanobacteria possess a sophisticated photosynthesis-based metabolism with admirable plasticity. This plasticity is possible via the deep regulation network, the thiol-redox regulations operated by thioredoxin (hereafter, Trx). In this context, we characterized the Trx-m1-deficient mutant strain of Anabaena sp., PCC 7120 (shortly named A.7120), cultivated under nitrogen limitation. Trx-m1 appears to coordinate the nitrogen response and its absence induces large changes in the proteome. Our data clearly indicate that Trx-m1 is crucial for the diazotrophic growth of A.7120. The lack of Trx-m1 resulted in a large differentiation of heterocysts (>20% of total cells), which were barely functional probably due to a weak expression of nitrogenase. In addition, heterocysts of the mutant strain did not display the usual cellular structure of nitrogen-fixative cells. This unveiled why the mutant strain was not able to grow under nitrogen starvation.

Cyanobacterial PHA Production-Review of Recent Advances and a Summary of Three Years' Working Experience Running a Pilot Plant

Cyanobacteria, as photoautotrophic organisms, provide the opportunity to convert CO2 to biomass with light as the sole energy source. Like many other prokaryotes, especially under nutrient deprivation, most cyanobacteria are able to produce polyhydroxyalkanoates (PHAs) as intracellular energy and carbon storage compounds. In contrast to heterotrophic PHA producers, photoautotrophic cyanobacteria do not consume sugars and, therefore, do not depend on agricultural crops, which makes them a green alternative production system. This review summarizes the recent advances in cyanobacterial PHA production. Furthermore, this study reports the working experience with different strains and cultivating conditions in a 200 L pilot plant. The tubular photobioreactor was built at the coal power plant in Dürnrohr, Austria in 2013 for direct utilization of flue gases. The main challenges were the selection of robust production strains, process optimization, and automation, as well as the CO2 availability.