Ag3PO4-based nanocomposites and their applications in photodegradation of toxic organic dye contaminated wastewater: Review on material design to performance enhancement

Photocatalytic removal of benzo[a]pyrene and antibacterial efficacy of Graphitic Carbon Nitride-silver-nickel (g-C3N4-Ag-Ni) mediated nanocomposites

A few PAHs (polycyclic aromatic hydrocarbons) which are known to be pervasive and are of high priority are found to be detrimental pollutants having high potential in the destruction of the network. Hence, photocatalytic disintegration of these PAHs, namely benzo [a]pyrene, found in water is explored. A novel nanocomposite of Ag-Ni on g-C3N4 was fabricated. The prepared nanocomposites were characterized by techniques like UV, XRD, SEM-EDAX, FTIR, and DLS to understand their nature. The activity of the same as a catalyst in the deterioration of the benzopyrene molecule in water was investigated under different conditions including change in the concentration of the PAH, dosage of the catalyst prepared, pH of the reaction mixture, and by changing the source of irradiation. In addition, antibacterial analysis of the prepared nanocomposite material was conducted to determine whether it could be applied to environmental cleanup strategies of high quality.

Engineering of Multifunctional Nanocomposite Membranes for Wastewater Treatment: Oil/Water Separation and Dye Degradation

Multifunctional membrane technology has gained tremendous attention in wastewater treatment, including oil/water separation and photocatalytic activity. In the present study, a multifunctional composite nanofiber membrane is capable of removing dyes and separating oil from wastewater, as well as having antibacterial activity. The composite nanofiber membrane is composed of cellulose acetate (CA) filled with zinc oxide nanoparticles (ZnO NPs) in a polymer matrix and dipped into a solution of titanium dioxide nanoparticles (TiO2 NPs). Membrane characterization was performed using transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), and Fourier transform infrared (FTIR), and water contact angle (WCA) studies were utilized to evaluate the introduced membranes. Results showed that membranes have adequate wettability for the separation process and antibacterial activity, which is beneficial for water disinfection from living organisms. A remarkable result of the membranes' analysis was that methylene blue (MB) dye removal occurred through the photocatalysis process with an efficiency of ~20%. Additionally, it exhibits a high separation efficiency of 45% for removing oil from a mixture of oil-water and water flux of 20.7 L.m-2 h-1 after 1 h. The developed membranes have multifunctional properties and are expected to provide numerous merits for treating complex wastewater.

Rapid Synthesis Method of Ag3PO4 as Reusable Photocatalytically Active Semiconductor

The widespread use of Ag₃PO₄ is not surprising when considering its higher photostability compared to other silver-based materials. The present work deals with the facile precipitation method of silver phosphate. The effects of four different phosphate sources (H₃PO₄, NaH₂PO₄, Na₂HPO₄, Na₃PO₄·12 H₂O) and two different initial concentrations (0.1 M and 0.2 M) were investigated. As the basicity of different phosphate sources influences the purity of Ag₃PO₄, different products were obtained. Using H₃PO₄ did not lead to the formation of Ag₃PO₄, while applying NaH₂PO₄ resulted in Ag₃PO₄ and a low amount of pyrophosphate. The morphological and structural properties of the obtained samples were studied by X-ray diffractometry, diffuse reflectance spectroscopy, scanning electron microscopy, infrared spectroscopy, and X-ray photoelectron spectroscopy. The photocatalytic activity of the materials and the corresponding reaction kinetics were evaluated by the degradation of methyl orange (MO) under visible light. Their stability was investigated by reusability tests, photoluminescence measurements, and the recharacterization after degradation. The effect of as-deposited Ag nanoparticles was also highlighted on the photostability and the reusability of Ag₃PO₄. Although the deposited Ag nanoparticles suppressed the formation of holes and reduced the degradation of methyl orange, they did not reduce the performance of the photocatalyst.

Recent progress in semiconductor/graphene photocatalysts: synthesis, photocatalytic applications, and challenges

The presence of an increasing number of organic pollutants in water now poses serious risks to both human health and ecological systems. Many of these pollutants are persistent and non-biodegradable. The contamination of fresh water by harmful substances has compelled researchers to develop innovative, efficient, and cost-effective water remediation techniques and materials. Thus, photocatalysis has long been recognized as a promising approach to tackle both environmental remediation and the energy crisis. However, semiconductor photocatalysts frequently suffer from defects such as photo-generated charge carrier recombination, poor visible light response, and slow surface reaction kinetics, which can be remedied by modifications with appropriate co-catalysts. Therefore, graphene and its derivatives have widely been used as supports for semiconductors and photocatalysts due to their distinctive optical, physicochemical, and electrical features. This critical review addresses the current progress in the design and synthesis of graphene/semiconductor photocatalysts, as well as their use in photocatalytic degradation of organic pollutants and hydrogen production. Several influencing parameters are addressed, including pH, photocatalyst loading, initial pollutant concentration, light wavelength, and oxidizing species, all of which could have a significant impact on the rate of organic pollutant's degradation. Furthermore, the recyclability of the catalyst and its photocatalytic activity mechanisms are thoroughly discussed. Numerous case studies are systematically presented. Moreover, future prospects and major challenges are highlighted.

Historical development and prospect of intimately coupling photocatalysis and biological technology for pollutant treatment in sewage: A review

Through the synergistic effect of photocatalysis and biodegradation, intimately coupling photocatalysis and biological (ICPB) technology could improve the removal rate and mineralization rate of refractory pollutants and reduce the toxicity of intermediate products. ICPB system was characterized with the advantages of simple operation, low energy consumption and high treatment efficiency. As a new sewage treatment technology, ICPB system has shown great potential in the treatment of refractory pollutants, and has been widely concerned. In this study, the research progress of photocatalyst, carrier and biofilm in ICPB system were discussed, and the degradation mechanism was introduced. The shortcomings of the current ICPB system were pointed out, and the possible research directions of ICPB in the future were proposed. This review aimed to deepen the understanding of ICPB technology and promoted the further development of ICPB technology in the treatment of refractory pollutants.

Photocatalytic degradation mechanism of phenanthrene over visible light driven plasmonic Ag/Ag3PO4/g-C3N4 heterojunction nanocomposite

Visible light driven plasmonic Ag/Ag₃PO₄/g-C₃N₄ heterojunction nanocomposite with regular morphology was prepared via a modified facile method. The two-dimensional ultrathin g-C₃N₄ nanosheet is uniformly wrapped on the surface of Ag₃PO₄ nanopolyhedron. A charge transfer bridge was built between Ag₃PO₄ nanopolyhedron and g-C₃N₄ nanosheet due to the reduction of Ag nanoparticles. This structure can inhibit the recombination of photogenerated electron-hole pairs and promote the transfer of photogenerated carriers, so as to produce more active species for participating in the photocatalytic reaction. In addition, the surface plasmon resonance (SPR) of appropriate Ag nanoparticles enhanced the absorption and utilization of visible light. Compared with Ag₃PO₄ and Ag/Ag₃PO₄, Ag/Ag₃PO₄/g-C₃N₄ showed higher photocatalytic activity. Under visible light irradiation, the degradation rate of phenanthrene (PHE) was 0.01756 min^-1, which was 3.14 times and 2.38 times that of Ag₃PO₄ and Ag/Ag₃PO₄, respectively. After four cycles of photocatalytic reaction, the Ag/Ag₃PO₄/g-C₃N₄ photocatalyst still maintained high photocatalytic activity. The active sites of PHE were predicted by Gaussian simulation calculation and combined with intermediate products identification of GC-MS, the possible degradation pathway of PHE was speculated. This research has reference significance for the construction of plasmonic heterojunction photocatalyst in the field of environmental pollution remediation.

Biochar based photocatalyst for degradation of organic aqueous waste: A review

The advancement in the treatment technology for wastewater containing recalcitrant pollutants to lower the overall cost and time of the treatment processes is the prime demand. Biochar (BC) based photocatalyst have proved their potential application in the photo-degradation of a wide range of organic pollutants. The structural and chemical properties of the BC enhance the efficacy of photocatalyst, improving its optical properties with increased stability. This review gives an overview of the progress that occurred during the last five years in BC-based photocatalyst for degradation of recalcitrant organic waste in the aqueous system, emphasizing the role of BC in the photocatalytic performance with a brief discussion regarding the various sources of BC and different strategies used to modify the BC. Further, the critical challenges are discussed, which would be confronted during the scaling up and real-time application in wastewater treatment.

A direct dual Z-scheme 3DOM SnS2-ZnS/ZrO2 composite with excellent photocatalytic degradation and hydrogen production performance

A novel direct dual Z-scheme 3DOM (three-dimensional ordered macropores) SnS₂-ZnS/ZrO₂ composite was prepared by the template method combined with the in situ sulfur replacement technology. The composition, structure, morphology, and surface physicochemical properties of the composites were well characterized. The results indicate that it possesses a uniform and periodical macroporous structure, a large surface area (121.1 m² g^-1), broad visible light absorption, and high separation ability of photoinduced electron/hole pairs. 3DOM SnS₂-ZnS/ZrO₂ composite removed 96.8% of methyl orange within 210 min of simulated sunlight irradiation. Moreover, photocatalytic hydrogen production achieved the rate of 928.1 μmol g^-1, which was 66.3 times as high as that of the commercial P25 after 8 h simulated sunlight irradiation. The enhanced photocatalytic performance mainly attributed to the direct dual Z-scheme system, which improves the charge separation efficiency and optimizes the charge transfer pathway. The charge transfer mechanism over the 3DOM SnS₂-ZnS/ZrO₂ is discussed in detail based on the results of radical trapping experiments. Our work paves a new way to design 3DOM materials with direct dual Z-scheme structure.

Photocatalytic Nanofiber Membranes for the Degradation of Micropollutants and Their Antimicrobial Activity: Recent Advances and Future Prospects

This review paper systematically evaluates current progress on the development and performance of photocatalytic nanofiber membranes often used in the removal of micropollutants from water systems. It is demonstrated that nanofiber membranes serve as excellent support materials for photocatalytic nanoparticles, leading to nanofiber membranes with enhanced optical properties, as well as improved recovery, recyclability, and reusability. The tremendous performance of photocatalytic membranes is attributed to the photogenerated reactive oxygen species such as hydroxyl radicals, singlet oxygen, and superoxide anion radicals introduced by catalytic nanoparticles such as TiO₂ and ZnO upon light irradiation. Hydroxyl radicals are the most reactive species responsible for most of the photodegradation processes of these unwanted pollutants. The review also demonstrates that self-cleaning and antimicrobial nanofiber membranes are useful in the removal of microbial species in water. These unique materials are also applicable in other fields such as wound dressing since the membrane allows for oxygen flow in wounds to heal while antimicrobial agents protect wounds against infections. It is demonstrated that antimicrobial activities against bacteria and photocatalytic degradation of micropollutants significantly reduce membrane fouling. Therefore, the review demonstrates that electrospun photocatalytic nanofiber membranes with antimicrobial activity form efficient cost-effective multifunctional composite materials for the removal of unwanted species in water and for use in various other applications such as filtration, adsorption and electrocatalysis.

Graphene/silver-based composites and coating on dead coral for degradation of organic pollution using the Z-scheme mechanism

A high-performance photocatalytic nanocomposite consisting of silver phosphate-based particles with GO and RGO was synthesized by co-precipitation and hydrothermal methods. Ag₃PO₄ was prepared by a co-precipitation method. The as-prepared Ag₃PO₄ nanocomposites were characterized by different analyses. The results demonstrated that the Ag₃PO₄ particles were well dispersed on the graphene-based surfaces. The photocatalytic performance of the GO/RGO/Ag₃PO₄ nanocomposite was evaluated for the photodegradation of methylene blue (MB) under exposure to visible light (xenon lamp λ > 400 nm). The degradation rate was about 98% in 5 min. The enhancement in photocatalytic performance is attributed to the simultaneous presence of RGO and GO, which show significantly high absorption of organic molecules on the surface of GO/RGO, allowing the effective transfer and separation of photogenerated electrons. In addition, this modified structure can be in situ synthesized on dead coral structures that can be used in future real case-studies of the degradation of other organic pollutants. The ingredient of these composites, however, is about 93% Ag₃PO₄.

A high-performance photocatalytic nanocomposite consisting of silver phosphate-based particles with GO and RGO was synthesized by co-precipitation and hydrothermal methods.

Fast and efficient degradation of water pollutant dyes and fungicide by novel sulfur-doped graphene oxide-modified Ag3PO4 nanocomposite

The sulfur-doped graphene oxide (sGO)-integrated Ag₃PO₄ composite displayed very high catalytic activity toward prominent water pollutants like textile dyes and fungicide under sunlight. The optimum amount of sGO doping was found as 5% for degradation. The novel composite degraded 99% of methylene blue (MB) in only 5 min of sunlight exposure, which is 16 and 8 times faster than Ag₃PO₄ and 5% GO-Ag₃PO₄. High mineralization was observed for MB with a total organic carbon (TOC) removal of 98% in 30 min. The composite mineralized rhodamine B, methyl orange, and acid red 18 dyes with a TOC removal above 95%. Moreover, a toxic dithiocarbamate fungicide thiram was degraded in 1 h with a TOC removal of 82% leaving less toxic thiourea. The formation of sGO-Ag₃PO₄ n-n heterojunction increases charge transport and photocatalytic activity of the composite to incredible extent along with hollow morphology and in situ formed Ag nanoparticles (AgNPs).

Immobilizing a visible light-responsive photocatalyst on a recyclable polymeric composite for floating and suspended applications in water treatment

A visible light responsive TiO2/Ag3PO4 (10 : 1) nanocomposite was prepared and successfully immobilized (12 wt%) in a spherical polymeric matrix consisting of polysulfone and alginate (10 : 6). The resulted beads featured a sponge-like structure with interconnected macrovoids and micropores, and showed high adsorption and visible-light photocatalytic activity towards various wastewater pollutants, including the widely used dye - methylene blue (k = 0.0321 min-1), and two emerging pharmaceutical contaminants - diclofenac (k = 0.018 min-1) and triclosan (k = 0.052 min-1). As determined, the ˙OH radical and h+ are the primary reactive oxygen species responsible for the photodegradation. The composite photocatalytic beads are also effective in bacterial inactivation and degradation of acyl-homoserine lactones (AHLs), the bacterial quorum sensing autoinducers triggering biofilms, thus exhibiting a promising future in wastewater disinfection and biofilm retardation. Additionally, these beads could be used in inter-switchable suspended or buoyant forms, and be effectively regenerated by H2O2 treatment, and used for multiple cycles without any significant loss in photoactivity. With these unique features, the prepared visible-light photocatalytic beads could be easily applied in large-scale water and wastewater treatment systems.

Ag3PO4/NiO Composites with Enhanced Photocatalytic Activity under Visible Light

Black NiO powders were prepared by a hydrothermal method. Moreover, the visible light-driven Ag3PO4/NiO photocatalyst composites were successfully synthesized by in situ precipitation method. These samples were structurally characterized by X-ray diffraction and Rietveld refinement. The strong interaction between the phases and the defects in the samples was affected by the formation of the composites, as identified by Fourier transform infrared spectroscopy and Raman spectroscopy. UV-vis diffuse reflectance spectroscopy exhibited enhanced light absorption for all Ag3PO4/NiO composites, suggesting the effective interaction between the phases. Moreover, field-emission scanning electron microscopy images revealed the presence of NiO microflowers composed of nanoflakes in contact with Ag3PO4 microparticles. The composite with 5% NiO presented enhanced photocatalytic efficiency in comparison with pure Ag3PO4, degrading 96% of rhodamine B (RhB) dye in just 15 min under visible light; however, the recycling experiments confirmed that the composite with 75% NiO showed superior stability. The recombination of the electron-hole pairs was considered for the measurement of the photoluminescence of the samples. These measurements were performed to evaluate the possible causes for the difference in the photocatalytic responses of the composites. From these experimental results, possible photocatalytic mechanisms for RhB degradation over Ag3PO4/NiO composites under visible-light irradiation were proposed.