Oxidation of azo dye Orange II with hydrogen peroxide catalyzed by 5,10,15,20-tetrakis[4-(diethylmethylammonio)phenyl]porphyrinato-cobalt(II)tetraiodide in aqueous solution

Wet Catalytic Oxidation of a FeMnCe-Activated Semi-Coke Catalyst for Treating Piperazine Wastewater

A FeMnCe-activated semi-coke catalyst (FeMnCe/ASC) was prepared by the co-precipitation method using semi-coke as the raw material. The structure and morphology were characterized by X-ray diffraction, Brunauer-Emmett-Teller, scanning electron microscopy, and transmission electron microscopy analyses. The catalytic activity and stability of the FeMnCe/ASC catalyst were investigated with piperazine as the target degradation pollutant and ammonia nitrogen and chemical oxygen demand (COD) as the evaluation indexes. The results showed that the average pore size of FeMnCe/ASC mesopores was 6.68 nm, and the active components were uniformly dispersed on the carrier surface. Under the optimum conditions of piperazine solution including a mass concentration of 100 mg/L, a catalyst mass concentration of 4.0 g/L, a reaction temperature of 240 °C, an oxygen partial pressure of 1.2 MPa, a stirring speed of 500 rpm, and a reaction time of 120 min, the degradation rates of both ammonia nitrogen and COD reached 100%. After the catalyst was recycled five times, the degradation rates of ammonia nitrogen and COD still reached more than 90%. The elemental valence changes before and after the reaction were analyzed by X-ray photoelectron spectroscopy, and the intermediate products generated from piperazine degradation were analyzed by gas chromatography-mass spectroscopy to evaluate the mechanism of piperazine degradation and speculate about the degradation pathway of piperazine.

Tailor-made novel electrospun polycaprolactone/polyethyleneimine fiber membranes for laccase immobilization: An all-in-one material to biodegrade textile dyes and phenolic compounds

In spite of many works on the biodegradation of textile dyes and phenolic compounds, we propose a new, inexpensive, environmentally friendly, and sustainable material based on electrospun fiber and immobilized laccase. The polycaprolactone (PCL)/polyethyleneimine (PEI) electrospun fibers were optimized and prepared by electrospinning technique according to the operational parameters like PCL concentration (12 wt%), PEI concentration (10 wt%), voltage (16 kV), needle tip-collector distance (20 cm), and injection speed (0.7 mL/h). Next, characterization studies were performed to investigate the morphology and structure of the electrospun fibers without and with laccase. The crude laccase was obtained by cultivating the white rot fungus T. trogii (TT), and T. versicolor (TV). The resulting electrospun fibers showed a smooth surface with a mean diameter of around 560 nm, and larger diameters were observed after laccase immobilization. According to the results, immobilization increased the stability properties of laccase such as storage, and operational. For instance, the residual activity of the PCL/PEI/TTL and PCL/PEI/TVL after 10 repeated cycles, was 33.2 ± 0.2% and 26.0 ± 0.9%, respectively. After 3 weeks of storage, they retained around 30% of their original activity. Moreover, the PCL/PEI/TTL and PCL/PEI/TVL were found to possess high decolorization yield to remove Orange II and Malachite Green textile dyes from solutions imitating polluted waters. Among them, the PCL/PEI/TTL exhibited the highest decolorization efficiencies of Orange II and Malachite Green after 8 continuous uses at pH 5 and a temperature of 50 °C, reaching over 86%, and 46%, respectively. Moreover, PCL/PEI/TTL and PCL/PEI/TVL effectively degraded the 2,6-dichlorophenol phenolic compound at an optimal pH and temperature range and exhibited maximum removal efficiency of 52.6 ± 0.1% and 64.5 ± 7.6%, respectively. Our approach combines the advantageous properties of electrospun fiber material and immobilization strategy for the efficient use of industrial scale important enzymes such as laccase in various enzymatic applications.

Development of a Sustainable Tungsten and Iron Bimetal-Immobilized SBA-15 Composite for Enhanced Wet Catalytic Oxidation of Dye Capacity

In this study, wet catalytic decomposition of Orange (II) dye was carried out with tungsten and iron bimetal-incorporated mesoporous SBA-15 (W-Fe@SBA-15) under visible light. The synthesized hybrid composite material was characterized by physicochemical methods, powder X-ray diffraction (PXRD) spectroscopy, scanning electron microscopy combined with energy-dispersive X-ray (SEM-EDX) spectroscopy studies, Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA), and surface property studies to understand the nature of the dye degradation process and for catalytic studies. The maximum degradation of Orange (II) dye measured by a UV-visible spectrophotometer was 99% at a contaminant volume of 2.7 × 10^-4 mol/L and a catalyst quantity of 2 g/L in 140 min reaction time. Using gas chromatography-mass spectrometry (GC-MS), the final products were chemically identified. The mechanistic steps of the process were carried out through a series of experiments. The recyclability of the catalyst added a novel feature for such a heterogeneous catalysis that can reduce secondary pollutants in water with no leaching effect observed.

Testing Thymol-Based DES for the Elimination of 11 Textile Dyes from Water

Textile industries release dangerous wastewater that contain dyes into the environment. Due to their toxic, carcinogenic and mutagenic nature, they must be removed before the discharge. Liquid–liquid extraction has proven to be an efficient method for the removal of these dyes. As extractants, deep eutectic solvents (DESs) have shown excellent results in recent years, as well as presenting several green properties. Therefore, four different hydrophobic DESs based on natural components were prepared thymol:decanoic acid (T:D (1:1)), thymol:DL-menthol (T:M (1:1)), thymol:DL-menthol (T:M (1:2)) and thymol:coumarin (T:C (2:1)) for the extraction of Malachite Green (MG), Brilliant Blue G (BBG), Acid Yellow 73 (AY73), Reactive Red 29 (RR29), Acid Blue 113 (AB113), Reactive Black 5 (RB5), Remazol Brilliant Blue (RBB), Direct Yellow 27 (DY27), Acid Blue 80 (AB80), Direct Blue 15 (DB15) and Acid Violet 43 (AV43) dyes from water. The operational parameters of the liquid–liquid extraction were selected in order to save time and materials, resulting in 30 min of stirring, 15 min of centrifugation and an aqueous:organic ratio of 5:1. In these conditions, the highest values of extraction obtained were 99% for MG, 89% for BBG and 94% for AY73. Based on these results, the influence of the aqueous:organic phase ratio and the number of necessary stages to achieve water decolorization was studied.

Kinetic Study of the Removal of Methyl Orange Dye by Coupling WO3/H2O2

In the present work, the heterogeneous Fenton-like process was employed to investigate the kinetic models of the degradation of methyl orange (MO) using tungsten oxide/hydrogen peroxide couple. Tungsten oxide particles were successfully synthesized by reflux without surfactant and characterized by using XRD, SEM, TEM, and FT-IR techniques. The influence of parameters such as temperature and concentration of MO was studied and pseudo first-order and second-order models were applied. WO3/H2O2 showed high efficiency in the removal of methyl orange and attained more than 92.8% in 180 min. The first-order kinetic model was described by the removal process with the correlation coefficient of R2 = 0.99.

Oxidative Hydroxylation of Aryl Boronic Acid Catalyzed by Co-porphyrin Complexes via Blue-Light Irradiation

Oxidative reactions often require unstable and environmentally harmful oxidants; therefore, the investigation of safer alternatives is urgent. Here, the hydroxylation of aryl boronic acid in the presence of Co-complexes is demonstrated. Tetrakis(4-carboxyphenyl) Co(II)-porphyrin was combined with biodegradable polymers such as chitosan catalyzed hydroxylation of phenyl boronic acids to form phenol derivatives under blue-light irradiation. This catalytic system can be used as an eco-friendly oxidation process that does not release oxidizing agents into the atmosphere.