Effects of short malunion of the clavicle on in vivo scapular kinematics

Residual kinematic deviations of the shoulder during humeral elevation after conservative treatment for mid-shaft clavicle fractures

Despite residual functional deficits clinically observed in conservatively treated mid-shaft clavicle fractures, no study has reported a quantitative assessment of the treatment effects on the kinematics of the shoulder complex during functional movement. Using computerised motion analysis, the current study quantified the 3D residual kinematic deviations or strategies of the shoulder complex bones during multi-plane elevations in fifteen patients with conservatively treated mid-shaft clavicle fractures and fifteen healthy controls. Despite residual clavicular malunion, the patients recovered normal shoulder kinematics for arm elevations up to 60° in all three tested planes. For elevations beyond 60°, normal clavicle kinematics but significantly increased scapular posterior tilt relative to the trunk was observed in the patient group, leading to significantly increased clavicular protraction and posterior tilt relative to the scapula (i.e., AC joint). Slightly different changes were found in the sagittal plane, showing additional changes of increased scapular upward rotations at 90° and 120° elevations. Similar kinematic changes were also found on the unaffected side, indicating a trend of symmetrical bilateral adaptation. The current results suggest that shoulder kinematics in multi-plane arm elevations should be monitored for any compromised integrated motions of the individual bones following conservative treatment. Rehabilitation strategies, including muscle strengthening and synergy stability training, should also consider compensatory kinematic changes on the unaffected side to improve the bilateral movement control of the shoulder complex during humeral elevation.

Prespinal Versus Conventional Hemicontralateral C7 Nerve Transfer in the Treatment of Total Brachial Plexus Roots Avulsion Injuries: A Retrospective Study With a Minimum Follow-Up Period of 4 Years

PURPOSE

Contralateral C7 (CC7)-to-median nerve transfer has been commonly used to restore hand function in brachial plexus injury. To shorten the nerve graft, the prespinal route was described and achieved direct coaptation when combined with humeral shortening osteotomy. The limb was positioned at 0° shoulder abduction and neutral head position. Given our concern about donor-site morbidity when harvesting the whole CC7 nerve and tension across the neurorrhaphy site after mobilization, we aimed to describe our modified prespinal route and compare its outcomes and complications with the conventional hemi-CC7 transfer.

METHODS

From 2004 to 2014, 39 patients with preganglionic total brachial plexus root avulsion injuries, with a minimum of 4 years of follow-up, were included. Overall, 20 and 19 patients underwent the conventional hemi-CC7-to-median nerve and hemi-CC7-to-lower trunk (LT) transfer through the modified prespinal route, respectively. The modified prespinal route was combined with bilateral clavicle shortening osteotomy to achieve direct coaptation to the LT at 45° shoulder abduction.

RESULTS

The modified prespinal route showed the median period to achieve ≥M3 hand grip assessed in clinical follow-up was shorter (26.5 months vs 45.5 months), and a higher proportion of patients achieved ≥M3 hand grip recovery (63% vs 30%). One patient experienced symptomatic phrenic nerve injury; however, the hemidiaphragm fully recovered after 6 months. The long-term donor-site complication rate was 2.6%, including one sensory abnormality, and no permanent donor-site weakness after hemi-CC7 harvesting was observed.

CONCLUSIONS

The modified prespinal route combined with clavicle osteotomy allowed direct coaptation to the LT and did not require head immobilization. It may allow a higher proportion of patients to achieve ≥M3 hand grip more quickly than conventional hemi-CC7 transfer.

TYPE OF STUDY/LEVEL OF EVIDENCE

Therapeutic IV.

Three-dimensional in vivo comparative analysis of the kinematics of normal shoulders and shoulders with massive rotator cuff tears with successful conservative treatment

BACKGROUND

This study used in vivo three-dimensional to two-dimensional image registration techniques to compare the glenohumeral kinematics of shoulders with massive rotator cuff tears that were successfully treated conservatively and those of normal shoulders.

METHODS

Ten patients (age, 67.4 ± 3.63 years) with massive rotator cuff tears on one side and without contralateral tears were enrolled. We performed computed tomography and fluoroscopy on both shoulder joints and created three-dimensional bone models of the humerus and scapula using image registration techniques. We measured the humeral superoinferior translation, angle of humeral external rotation, scapular upward rotation, scapular anteroposterior tilt, and scapular external rotation of the torn shoulders with good range of motion after effective conservative treatment and compared these measurements to those of the contralateral normal shoulders.

FINDINGS

There was a significant difference in the initial position of the humeral head relative to the glenoid in the tear group; it was 2.0 mm higher than that in the normal group (p < .05). This difference disappeared in the range from 40° to full elevation. The scapular motion of the tear group was significantly more upwardly rotated than that of the normal group: by 9.9° at rest (p < .05) and by 11.6° at terminal elevation (p < .05). No significant differences were detected for humeral head external rotation, scapular anteroposterior tilt, and scapular external rotation between the two groups.

INTERPRETATION

Kinematics of shoulders with massive cuff tears could not be recovered completely even though the patients had no significant symptoms after successful conservative treatment.

Scapular Dyskinesis: From Basic Science to Ultimate Treatment

Background: This study intends to summarize the causes, clinical examination, and treatments of scapular dyskinesis (SD) and to briefly investigate whether alteration can be managed by a precision rehabilitation protocol planned on the basis of features derived from clinical tests. Methods: We performed a comprehensive search of PubMed, Cochrane, CINAHL and EMBASE databases using various combinations of the keywords “Rotator cuff”, “Scapula”, “Scapular Dyskinesis”, “Shoulder”, “Biomechanics” and “Arthroscopy”. Results: SD incidence is growing in patients with shoulder pathologies, even if it is not a specific injury or directly related to a particular injury. SD can be caused by multiple factors or can be the trigger of shoulder-degenerative pathologies. In both cases, SD results in a protracted scapula with the arm at rest or in motion. Conclusions: A clinical evaluation of altered shoulder kinematics is still complicated. Limitations in observing scapular motion are mainly related to the anatomical position and function of the scapula itself and the absence of a tool for quantitative SD clinical assessment. High-quality clinical trials are needed to establish whether there is a possible correlation between SD patterns and the specific findings of shoulder pathologies with altered scapular kinematics.

Symptomatic malunion after midshaft clavicle fracture in an adolescent patient: a case report of surgical deformity correction using a 3D printed model

A 14-year-old boy underwent surgery for symptomatic malunion of the clavicle. This complication, which is uncommon in adults and adolescents, occurred after a displaced midshaft clavicle fracture that had been treated conservatively. Surgery may be considered if functional impairment, pain, weakness, fatigability and neurological symptoms persist in the presence of significant clavicular deformity. Our case was unusual because the patient had a symptomatic malunion and lost range of movement of his shoulder despite a minor degree of clavicular shortening. We adopted an approach used in lower limb deformity correction but not described for the clavicle in which corrective osteotomy was planned and practised using a three-dimensional printed model of the malunited clavicle. A three-dimensional printed model of the mirror image of the opposite clavicle served as a template of normal. Three-dimensional models were printed from the computed tomography data. The patient's symptoms resolved and he recovered full range of movement and shoulder function following the corrective osteotomy.

Free Vascularized Fibular Graft for Reconstruction of the Lateral Clavicle: A Case Report and Review of the Literature

CASE

A 50-year-old female patient presented with significant (40%) bone loss of the lateral clavicle extending to the acromioclavicular (AC) joint, as a result of multiple, failed revision surgeries following a fracture-dislocation. She was treated with a free vascularized fibular graft and biplanar stabilization of the AC joint. At 4 years of follow-up, the patient had experienced resolution of painful symptoms with a Constant-Murley score of 72.

CONCLUSIONS

Reconstruction of large, lateral clavicle defects with a free vascularized fibular graft and biplanar stabilization of the AC joint may provide a satisfactory clinical outcome.

Comparative analysis of functional outcome of anatomical precontoured locking plate versus reconstruction plate in the management of displaced midshaft clavicular fractures

INTRODUCTION

For the fixation of displaced midshaft clavicular fractures, different plates are available, each with its specific pros and cons. The ideal plating choice remains subject to ongoing discussion. Reconstruction plates are cheap and easily bendable, but their strength and stability have been questioned. The anatomical precontoured locking plates provide better stability and strength compared with the reconstruction plate.

MATERIALS AND METHODS

We have analyzed both prospectively and retrospectively 55 cases of displaced midshaft clavicular fractures treated surgically using precontoured anatomical locking plate (24 cases) or reconstruction plate (31 cases) for patients admitted in our institute between January 2011 and December 2017. The clinical and radiological outcomes between the reconstruction plate and precontoured anatomical locking plate were compared using Quick Disability of the Arm, Shoulder and Hand (DASH) score and plain radiographs, respectively.

RESULTS

The mean time to union was 16.3 weeks in the reconstruction plate group compared with 13.4 weeks in the precontoured locking plate group. The mean score in Quick DASH was 32.65 in the reconstruction group and 25.44 points in the precontoured locking plate group. We had complications such as hypertrophic scar, painful shoulder, and restricted range of motion in both the groups, whereas screw cutout and plate failure were noted only in the reconstruction plate group, which needed implant removal. The mean follow-up period was 16.44 months (14-31 months). The removal of implant was carried out in three patients in the reconstruction group. None of the group had nonunion.

CONCLUSION

Surgical management of fresh middle third clavicle fractures with anatomical precontoured locking plate provided stable fixation, faster union, and better functional outcome compared with the reconstruction plating. Anatomical plate had the advantage of less soft tissue stripping, and there is less need for lag screw fixation of the plate for fracture stability as precontoured plate itself provides a rigid construct.

Midshaft clavicle fractures: Current concepts

Clavicle fractures are common fractures and the optimal treatment strategy remains debatable. The present paper reviews the available literature and current concepts in the management of displaced and/or shortened midshaft clavicle fractures.

Operative treatment leads to improved short-term functional outcomes, increased patient satisfaction, an earlier return to sports and lower rates of non-union compared with conservative treatment. In terms of cost-effectiveness, operative treatment also seems to be advantageous.

However, operative treatment is associated with an increased risk of complications and re-operations, while long-term shoulder functional outcomes are similar.

The optimal treatment strategy should be one tailor-made to the patient and his/her specific needs and expectations by utilizing a shared decision-making model.

Cite this article: EFORT Open Rev 2018;3:374-380. DOI: 10.1302/2058-5241.3.170033

[Complications after intramedullary stabilization of clavicle fractures]

BACKGROUND

Operative treatment of clavicle fractures by intramedullary nailing with titanium elastic nailing (TEN) has been established as an alternative to plate osteosynthesis for many years. The main complication after TEN osteosynthesis is nail migration. The goal of this study was evaluation of predictors for medial nail migration and comparison with plate osteosynthesis.

MATERIAL AND METHODS

A retrospective analysis of electronic patient charts, surgical protocols and radiographs of all operatively treated clavicle shaft fractures between 2010-2014 (n = 141) was performed. When evaluating the patient charts and the surgical protocols special attention was paid to the fracture type, the duration of the operation, the need for an open reduction and the onset of complications as well as the duration until implant removal. Radiographs were analyzed concerning the implant location and an implant migration.

RESULTS

Surgery time (39 vs. 83 min) as well as the time to implant removal (226 vs. 495 days) were significantly reduced (p = 0.00), while complication (39% vs. 21.4%) as well as reoperation rates (15% vs. 7.1%; p = 0.033) were increased in TEN compared to plate osteosynthesis. The main complication was medial nail migration. The following predictors regarding medial migration could be identified: open or closed reduction (p = 0.021), multifragmentary fractures (p = 0.049), oblique fractures (p = 0.08) and TEN thickness (33% at 2 mm, 0% at 3 mm).

DISCUSSION

Advantages of TEN are a shorter surgery time as well as a shorter duration until implant removal. The TEN osteosynthesis led to a significantly increased complication rate, with nail migration representing the major reason. When predictors for medial TEN migration are considered, type B and C fractures can also be sufficiently treated by a large diameter TEN.

Nonoperative Treatment of Midshaft Clavicle Fractures in Adults

Clavicle fractures are among the most common skeletal injuries accounting for 2-5% of all adult fractures. Historically, nonoperative treatment of midshaft clavicular fractures was considered the gold standard of care. Furthermore, nonoperative treatment has been challenged by an increasing popularity and rate of surgical fixations in recent years despite a lack of clear evidence in the current literature. Most fractures are suitable for conservative treatment. There is solid evidence in favour of nonoperative treatment for fractures with a displacement of less than 2cm and remaining contact of the bone fragments. Clear indications for conservative treatment versus surgical fixation of displaced midshaft fractures have not finally been established yet, leaving some questions and problems unanswered. Furthermore, there are no evidence-based recommendations concerning the kind and duration of shoulder immobilisation with no clear advantage for any treatment modality.