Glenoid component lucencies are associated with poorer patient-reported outcomes following anatomic shoulder arthroplasty

Pain relief survivorship: a comparison of Exactech Equinoxe anatomic and reverse total shoulder arthroplasty for primary osteoarthritis

BACKGROUND

Pain relief plays a major deterministic role when assessing postoperative patient satisfaction; however, whether anatomic total shoulder arthroplasty (aTSA) or reverse total shoulder arthroplasty (rTSA) provides the most durable pain relief has not been studied. The purpose of this study was to evaluate the durability of pain relief after aTSA compared with rTSA in patients undergoing surgery for rotator cuff-intact glenohumeral osteoarthritis (RCI-GHOA).

METHODS

A retrospective review of a multicenter shoulder arthroplasty database (Exactech Equinoxe) was performed. We included 1848 aTSAs and 1464 rTSAs performed for RCI-GHOA between 2007 and 2023. Pain after surgery was assessed postoperatively at 3 months, 6 months, and yearly thereafter. Average postoperative pain on a daily basis and pain at worst were compared between aTSA and rTSA up to 8 years postoperatively. Kaplan-Meier survivorship analysis for pain relief maintenance was performed to compare the maintenance of clinically relevant pain relief defined as pain scores that achieved the minimal clinically important difference (MCID), substantial clinical benefit (SCB), and patient acceptable symptomatic state (PASS). Maintenance of favorable patient satisfaction over time was also evaluated. Multivariable cox regression was performed to determine whether the type of prosthesis (aTSA vs. rTSA) was independently associated with pain recurrence.

RESULTS

Maintenance of achievement of the MCID and SCB for both daily pain and pain at worst as well as favorable patient satisfaction was similar between aTSAs and rTSAs. However, aTSA had longer maintenance of average daily pain below the PASS compared with rTSA (P = .024). This was confirmed on multivariable cox regression analysis, which found that rTSAs had a 34% greater likelihood of recurrence of postoperative average daily pain exceeding the PASS (visual analog scale score rating 1/10) compared with aTSAs.

CONCLUSION

Patients who undergo either aTSA or rTSA for RCI-GHOA and achieve initial pain relief postoperatively can expect to maintain their clinically relevant pain improvement at similar rates up to 8 years postoperatively. However, recurrence of low levels of daily pain was significantly higher after rTSA.

Midterm radiographic outcomes of anatomic total shoulder arthroplasty in biplanar glenoid deformities

BACKGROUND

Optimal management of retroversion in anatomic total shoulder arthroplasty (aTSA) remains controversial, and limited attention has been directed to the impact of glenoid inclination. Prior biomechanical study suggests that residual glenoid inclination generates shear stresses that may lead to early glenoid loosening. Combined biplanar glenoid deformities may complicate anatomic glenoid reconstruction and affect outcomes. The goal of this matched-cohort analysis was to assess the relationship between biplanar deformities and midterm radiographic loosening in aTSA.

METHODS

The study cohort was identified via an institutional repository of 337 preoperative CT scans from 2010 to 2017. Glenoid retroversion, inclination, and humeral head subluxation were assessed via 3D-planning software. Patients with retroversion ≥20° and inclination ≥10° who underwent aTSA with eccentric reaming and nonaugmented components were matched by age, sex, retroversion, and Walch classification to patients with retroversion ≥20° only. Primary outcome was glenoid component Lazarus radiolucency score.

RESULTS

Twenty-eight study subjects were matched to 28 controls with retroversion only. No difference in age (61.3 vs. 63.6 years, P = .26), sex (19 [68%] vs. 19 [68%] male, P > .99), or follow-up (6.1 vs. 6.4 years, P = .59). Biplanar deformities had greater inclination (14.5° vs. 5.3°, P < .001), retroversion (30.0° vs. 25.6°, P = .01), and humeral subluxation (86.3% vs. 82.1%, P = .03). Biplanar patients had greater postoperative implant superior inclination (5.9° [4.6°] vs. 3.0° [3.6°], P = .01) but similar rate of complete seating 24 [86%] vs. 24 [86%] P > .99). At final follow-up, biplanar subjects had higher Lazarus radiolucent scores (2.4 [1.7] vs. 1.6 [1.1], P = .03) and a higher proportion of patients with glenoid radiolucency (19 [68%] vs. 11 [39%], P = .03). No difference in complete component seating (86% vs. 86%, P = .47) or initial radiolucency grade (0.21 vs. 0.29, P = .55) on immediate postop radiographs. Biplanar patients demonstrated a greater amount of posterior subluxation at immediate postoperative (3.5% [1.3%] vs. 1.8% [0.6%]; P = .03) and final follow-up (7.6% [2.8%] vs. 4.0% [1.8%]; P = .04). At final radiographic follow-up, biplanar subjects had higher Lazarus radiolucent scores (2.4 [1.7] vs. 1.6 [1.1], P = .03; ICC = 0.82). Bivariate regression analysis demonstrated that biplanar deformity was the only significant predictor (OR 3.3, P = .04) of glenoid radiolucency.

DISCUSSION

Biplanar glenoid deformity resulted in time-zero glenoid implant superior inclination and increased midterm radiographic loosening and posterior subluxation. Attention to glenoid inclination is important for successful anatomic glenoid reconstruction. Future research is warranted to understand the long-term implications of these findings and impact of using augmented implants or reverse shoulder arthroplasty to manage biplanar deformities.

Anatomic Versus Reverse Total Shoulder Arthroplasty for Primary Osteoarthritis With an Intact Rotator Cuff: A Midterm Comparison of Early Top Performers

BACKGROUND

Several surgeons state that their best anatomic total shoulder arthroplasty (aTSA) outperforms their best reverse total shoulder arthroplasty (rTSA) when performed for rotator cuff-intact glenohumeral osteoarthritis. We identified the top-performing aTSAs and rTSAs at short-term follow-up and compared their clinical performance at midterm follow-up to validate this common claim.

METHODS

A retrospective review of a multicenter shoulder arthroplasty database was conducted. All shoulders undergoing primary aTSA or rTSA for rotator cuff-intact glenohumeral osteoarthritis between 2007 and 2020 were reviewed. Shoulders with a follow-up clinical visit between 2 and 3 years and a clinical follow-up of minimum 5 years were included. Two separate cohorts were identified: patients with a top 20% (1) American Shoulder and Elbow Surgeons (ASES) score and (2) Shoulder Arthroplasty Smart (SAS) score at 2 to 3 years of follow-up. Clinical outcomes including range of motion, outcome scores, and rates of complications and revision surgeries were compared at minimum 5-year follow-up.

RESULTS

The ASES score cohort comprised 185 aTSAs (mean age 67 years, 42% female) and 49 rTSAs (mean age 72 years, 45% female). The SAS score cohort comprised 145 aTSAs (mean age 67 years, 59% female) and 42 rTSAs (mean age 71 years, 57% female). Active external rotation (ER) was greater after aTSA at midterm follow-up in both ASES and SAS score cohorts; however, preoperative to postoperative improvement was equivalent. Postoperative ER and SAS scores were greater after aTSA in both cohorts ( P < 0.05); however, no other significant differences in any preoperative or postoperative clinical outcomes were present ( P > 0.05), and patients achieved the minimal clinically important difference and substantial clinical benefit at similar rates for all outcomes. No difference was found in the incidence of complications and revision surgeries between top-performing aTSAs and rTSAs.

CONCLUSION

Among top-performing shoulder arthroplasties at early follow-up, aTSA does not appear to outperform rTSA, except superior ER at midterm follow-up.

LEVEL OF EVIDENCE

Retrospective comparative cohort study, Level Ⅲ.

The effect of smoking on functional outcomes and implant survival of anatomical total shoulder arthroplasty

Aims

We sought to compare functional outcomes and survival between non-smokers, former smokers, and current smokers who underwent anatomical total shoulder arthroplasty (aTSA) in a large cohort of patients.

Methods

A retrospective review of a prospectively collected shoulder arthroplasty database was performed between August 1991 and September 2020 to identify patients who underwent primary aTSA. Patients were excluded for preoperative diagnoses of fracture, infection, or oncological disease. Three cohorts were created based on smoking status: non-smokers, former smokers, and current smokers. Outcome scores (American Shoulder and Elbow Surgeons (ASES), Constant-Murley score, Shoulder Pain and Disability Index (SPADI), Simple Shoulder Test (SST), University of California, Los Angeles activity scale (UCLA)), range of motion (external rotation (ER), forward elevation (FE), internal rotation, abduction), and shoulder strength (ER, FE) evaluated at two- to four-year follow-up were compared between cohorts. Evaluation of revision-free survival was performed using the Kaplan-Meier method to final follow-up.

Results

We included 428 primary aTSAs with a mean follow-up of 2.4 years (SD 0.6). Our cohort consisted of 251 non-smokers, 138 former smokers who quit a mean 21 years (SD 14) prior to surgery (25 pack-years (SD 22)), and 39 current smokers (23 pack-years (SD 20)). At two- to four-year follow-up, former smokers had less favourable SPADI, SST, and FE strength compared to non-smokers, and current smokers had less favourable SPADI, SST, ASES score, UCLA score, Constant-Murley score, FE, abduction, and ER strength compared to non-smokers. Non-smokers exhibited higher revision-free survival rates at two, five, eight, and ten years postoperatively compared to former smokers and current smokers, who had similar rates.

Conclusion

Our study suggests that smoking has a negative effect on aTSA functional outcomes that may persist even after quitting.

Outcomes of patients undergoing anatomical total shoulder arthroplasty with augmented glenoid components - a systematic review

Background

Glenoid loosening is an issue in anatomic total shoulder arthroplasty (a-TSA). This has been attributed to abnormal glenoid anatomy, common among these patients. Different alternatives have been proposed to tackle glenoid bone loss and restore joint alignment with augmented glenoid implants being increasingly used to deal with this problem. This systematic review aims to evaluate the clinical and radiological outcomes of patients undergoing augmented glenoid a-TSAs. Our hypothesis was that augmented glenoid components will lead to good patient outcomes with a low incidence of complications and revision procedures.

Methods

MEDLINE, EMBASE, CENTRAL and CINHAL were searched from inception to February 2022 for information pertaining to outcomes of patients undergoing a-TSA with augmented glenoid implants.

Results

Eighteen studies reported on outcomes of 814 a-TSA (800 participants) with a mean follow-up of 3.7 years. Most studies (67%) were Type IV level of evidence. Almost 70% of participants underwent an a-TSA secondary to primary glenohumeral osteoarthritis. Most glenoids were type B2 (73%). Augmented glenoids material was mostly all-polyethylene (81%) with full wedge (45%) and stepped components (38%) designs being the most common. Most studies reported good clinical outcomes. 17 patients (4%) underwent a revision surgery.

Conclusions

Our review found that patients undergoing a-TSA with augmented glenoid components report good outcomes at short-to-mid-term follow-up. Further research is warranted to determine if such outcomes remain similar in long term.

Level of evidence

Level III, Systematic Review of Therapeutic Studies.

Planned Glenoid Implant Utilization: A Comparison of Preoperative Planning with and Without Computer-Assisted Navigation

BACKGROUND

Preoperative planning for anatomic total shoulder arthroplasty (aTSA) and reverse total shoulder arthroplasty (rTSA) is becoming increasingly common. While preoperative planning allows surgeons to determine individualized implant types, utilization of intraoperative navigation improves the accuracy of implant placement and may increase confidence in the preoperative plan. The purpose of this study was to evaluate and compare the rate at which surgeons use a glenoid implant different than their preoperative plan with and without the use of computer navigation.

METHODS

A retrospective review of a multicenter prospectively collected shoulder arthroplasty database was conducted between 2016 and 2022. Inclusion criteria were primary aTSA or rTSA with an available preoperative plan and record of the actual implant used. Change in glenoid implant was defined as a deviation in the final implant from the preoperative plan in regard to backside shape (nonaugmented vs augment or differing augment shape).

RESULTS

We included 1,915 shoulder arthroplasties (525 aTSA, 1,390 rTSA) performed with preoperative planning and intraoperative navigation and 110 shoulder athroplasties (37 aTSA, 73 rTSA) performed with preoperative planning alone. Overall, the final glenoid implant deviated from the preoperative plan less frequently when intraoperative navigation was used compared with preoperative planning alone (1.9% [n = 36] versus 7.3% [n = 8], P = 0.002). When stratified by procedure, deviation from the preoperative plan occurred significantly less for rTSA when preoperative planning was used with intraoperative navigation versus planning alone (2% [n = 29] versus 11% [n = 8], P < 0.001; OR = 0.17 [95% CI = 0.07 to 0.46]), but not aTSA (1% [n = 7] versus 0% [n = 0], P = 1). Use of intraoperative navigation was independently associated with lower odds of deviation from the preoperative plan on multivariable logistic regression (OR = 0.25 [95% CI = 0.11 to 0.56], P = 0.001).

CONCLUSION

Use of intraoperative navigation is associated with increased adherence to the preoperative plan for primary rTSA. Use of navigation may increase surgeon confidence despite known limitations of glenoid visualization during this procedure. This may offer advantages in outpatient surgery centers and smaller hospitals where inventory space may be limited.

LEVEL OF EVIDENCE

Ⅲ, retrospective cohort study.

Comparison of long-term clinical and radiological outcomes for cemented keel, cemented peg, and hybrid cage glenoids with anatomical total shoulder arthroplasty using the same humeral component

Aims

The aim of this study was to longitudinally compare the clinical and radiological outcomes of anatomical total shoulder arthroplasty (aTSA) up to long-term follow-up, when using cemented keel, cemented peg, and hybrid cage peg glenoid components and the same humeral system.

Methods

We retrospectively analyzed a multicentre, international clinical database of a single platform shoulder system to compare the short-, mid-, and long-term clinical outcomes associated with three designs of aTSA glenoid components: 294 cemented keel, 527 cemented peg, and 981 hybrid cage glenoids. Outcomes were evaluated at 4,746 postoperative timepoints for 1,802 primary aTSA, with a mean follow-up of 65 months (24 to 217).

Results

Relative to their preoperative condition, each glenoid cohort had significant improvements in clinical outcomes from two years to ten years after surgery. Patients with cage glenoids had significantly better clinical outcomes, with higher patient-reported outcome scores and significantly increased active range of motion, compared with those with keel and peg glenoids. Those with cage glenoids also had significantly fewer complications (keel: 13.3%, peg: 13.1%, cage: 7.4%), revisions (keel: 7.1%, peg 9.7%, cage 3.5%), and aseptic glenoid loosening and failure (keel: 4.7%, peg: 5.8%, cage: 2.5%). Regarding radiological outcomes, 70 patients (11.2%) with cage glenoids had glenoid radiolucent lines (RLLs). The cage glenoid RLL rate was 3.3-times (p < 0.001) less than those with keel glenoids (37.3%) and 4.6-times (p < 0.001) less than those with peg glenoids (51.2%).

Conclusion

These findings show that good long-term clinical and radiological outcomes can be achieved with each of the three aTSA designs of glenoid component analyzed in this study. However, there were some differences in clinical and radiological outcomes: generally, cage glenoids performed best, followed by cemented keel glenoids, and finally cemented peg glenoids.

Mid- to long-term outcomes of a cemented, all-polyethylene pegged glenoid component in anatomic total shoulder arthroplasty

BACKGROUND

The primary aim of this study was to evaluate mid- to long-term survival of an all-polyethylene pegged glenoid component used in anatomic total shoulder arthroplasty (TSA). The secondary aim was to review clinical and radiologic outcomes.

METHODS

A retrospective analysis of a prospectively collected local arthroplasty register of consecutive patients undergoing TSA with an all-polyethylene pegged glenoid between January 2009 and December 2018 was undertaken. In total, 108 TSAs using this implant were performed in our unit in 98 patients (18 men and 80 women), with 10 patients undergoing bilateral TSA. The mean age at the time of the operation was 71.3 years (range, 44-87 years). The mean follow-up period was 5.1 years (range, 2-10.6 years). In addition to survival analysis, clinical evaluation included the postoperative Oxford Shoulder Score, Constant score, and visual analog scale (VAS) pain score, as well as range-of-motion assessment. Radiologic outcomes included an assessment of radiolucency based on the Lazarus grade.

RESULTS

Kaplan-Meier survival analysis revealed a 6-year survival estimate of 94.1% for all-cause revision. Revision was required in 6 patients: 4 for cuff failure and 2 for instability. At follow-up, the mean Oxford Shoulder Score was 38.2 (standard deviation [SD], 12.3); mean Constant score, 59.3 (SD, 17.0); and mean VAS pain score, 1.8 (SD, 2.5). Mean forward elevation at final follow-up was 111⁰ (SD, 26.6⁰); mean abduction, 102⁰ (SD, 34.0⁰). Clinical outcomes were maintained at long-term follow-up (>8 years), with the exception of the VAS pain score, which increased by 2.1 points (P = .034). Radiologic assessment revealed that 28 patients had radiolucency consistent with Lazarus grade ≥ 3 with clinical outcomes not being affected.

CONCLUSIONS

Mid- to long-term follow-up indicates a low revision rate and good clinical survivorship for cemented, all-polyethylene glenoid components. No patients, so far, have undergone revision for glenoid loosening, but radiographic follow-up has shown that 36% of these implants have signs of radiolucency. Further follow-up is required to determine longer-term survivorship.

Evaluation of the Painful Total Shoulder Arthroplasty

Despite the overall success of anatomic and reverse total shoulder arthroplasties (aTSA and rTSA), some patients continue to have or develop pain postoperatively. As the number of shoulder arthroplasties continues to increase in the United States, it is important that surgeons are able to recognize, diagnose, and treat the various pathologies. Some painful etiologies are specific to either aTSA or rTSA, and others can occur with both implant types. Infections, stiffness, neurologic syndromes, polyethylene wear, aseptic implant loosening, and metal allergies occur, regardless of implant choice. However, after an aTSA, subscapularis repair failure, superior rotator cuff tear, and joint overstuffing can result in shoulder pain. After a rTSA, specific causes of postoperative pain include instability, scapular notching, acromial or scapular spine fractures, subcoracoid pain, and neurologic injury. Regardless of the diagnosis, the surgeon must be methodical in the evaluation and, when appropriate, use blood work, advanced imaging studies, joint aspirations, shoulder arthroscopy, and nerve studies. Once diagnosed, appropriate treatment should be undertaken to resolve the cause of the pain or at least minimize the effect of the pain on the patient's outcome.

Elliptical heads result in increased glenohumeral translation along with micro-motion of the glenoid component during axial rotation in total shoulder arthroplasty

INTRODUCTION

Elliptical-shaped humeral head prostheses have recently been proposed to reflect a more anatomic shoulder replacement. However, its subsequent effect on micro-motion of the glenoid component is still not understood.

MATERIALS AND METHODS

Six fresh-frozen, cadaveric shoulders (mean age: 62.7 ± 9.2 years) were used for the study. Each specimen underwent total shoulder arthroplasty using an anatomic stemless implant. At 15°, 30°, 45° and 60° of glenohumeral abduction, 50° of internal and external rotations in the axial plane were alternatingly applied to the humerus with both an elliptical and spherical humeral head design. Glenohumeral translation was assessed by means of a 3-dimensional digitizer. Micro-motion of the glenoid component was evaluated using four high-resolution differential variable reluctance transducer strain gauges, placed at the anterior, posterior, superior, and inferior aspect of the glenoid component.

RESULTS

The elliptical head design showed significantly more micro-motion in total and at the superior aspect of glenoid component during external rotation at 15° (total: P = 0.004; superior: P = 0.004) and 30° (total: P = 0.045; superior: P = 0.033) of abduction when compared to the spherical design. However, during internal rotation, elliptical and spherical heads showed similar amounts of micro-motion at the glenoid component at all tested abduction angles. When looking at glenohumeral translation, elliptical and spherical heads showed similar anteroposterior and superoinferior translation as well as compound motion during external rotation at all tested abduction angles. During internal rotation, the elliptical design resulted in significantly more anteroposterior translation and compound motion at all abduction angles when compared to the spherical design (P < 0.05).

CONCLUSION

In the setting of total shoulder arthroplasty, the elliptical head design demonstrated greater glenohumeral translation and micro-motion at the glenoid component during axial rotation when compared to the spherical design, potentially increasing the risk for glenoid loosening in the long term.

LEVEL OF EVIDENCE

Controlled Laboratory Study.

Radiologic midterm results of cemented and uncemented glenoid components in primary osteoarthritis of the shoulder: a matched pair analysis

INTRODUCTION

Cemented all-polyethylene glenoid components are considered the gold standard in anatomic shoulder arthroplasty. New designs of cementless metal backed glenoid components showed promising early and midterm results. The aim of this matched-pair analysis was to compare the radiologic results of two cemented glenoid components and a cementless glenoid component in patients with primary osteoarthritis (OA).

METHODS

Sixty shoulders were clinically and radiologically evaluated after a mean follow-up of 59 months. Mean patient age was 70.4 years at surgery. Based on the design of the glenoid component (keel, peg, MB), 3 groups with, respectively, 20 shoulders were formed according to the matching criteria time of follow-up, patient age and gender. RLL and osteolysis in anteroposterior and axillary X-ray images were quantified and combined in a radiologic score (R-Score). Higher scores expressed worse radiologic outcomes. Further radiological parameters such as lateral glenohumeral offset (LGHO) and subluxation index were measured according to Walch. The functional results were documented using the age and gender normalized Constant-Murley score.

RESULTS

Postoperative R-Score was highest in pegged components (peg: 5.7, keel: 2.4, MB: 1.6; p < 0.001) when combining both radiographs and after separate analysis of anteroposterior radiographs. MB glenoids had the lowest R-score in axillary radiographs (peg: 2.2, keel: 1.4, MB: 0.6; MB vs. keel: p = 0.004, MB vs peg: p < 0.001). RLL were more common (p = 0.004) and severe (p = 0.005) in pegged glenoids (RLL incidence: 77.8%, RLL-score: 2.5) than in MB glenoids (RLL incidence: 30%, RLL-score 0.7) and tended (p = 0.084) to have a higher RLL-score than keeled glenoids (RLL incidence: 63.2%, RLL-score:1.4). Both the osteolysis score (keel vs. peg: p < 0.001, MB vs. peg p < 0.001) and the incidence of osteolysis (keel vs. peg: p = 0.008, MB vs peg: p = 0.003) were significant higher in pegged glenoids (peg: osteolysis score: 3.2, osteolysis incidence: 100%; keel: osteolysis score: 1.0, osteolysis incidence: 63.2%, MB: osteolysis score: 0.9, osteolysis incidence: 60%), while the osteolysis score in axillary images was lowest for MB glenoids (peg: 1.2, keel: 0.9, MB: 0.4; peg vs. MB: p = 0.009, keel vs. MB: p = 0.047). Osteolysis in the central axillary zone was least common in MB glenoids (peg: 50%, keel: 47.4%, MB: 15%; peg vs. MB p = 0.035, keel vs. MB p = 0.041). LGHO was highest in MB glenoids (peg: 54.1, keel: 54.5, MB: 57.8; p < 0.001) but did not increase radiographic loosening (r = 0.007; p = 0.958). Preoperative posterior humeral head subluxation seemed to affect incidence of RLL negatively (pre-op posterior decentered 64.3%, pre-op centered 31.9%; p = 0.201) but did not reach statistical significance.

CONCLUSION

Pegged glenoid components had a concerning rate of RLL and osteolysis. MB glenoid components had a better outcome in axillary radiographs concerning RLL and osteolysis. Increased LGHO did not increase radiographic loosening.

LEVEL OF EVIDENCE

Retrospective comperative treatment study Level III.

Clinical and radiographic outcomes following anatomic total shoulder arthroplasty utilizing an inset glenoid component at 2-year minimum follow-up: a dual center study

BACKGROUND

Anatomic total shoulder arthroplasty (aTSA) is a successful and reproducible treatment for patients with painful glenohumeral arthritis. However, long-term outcomes using traditional onlay glenoid components have been tempered by glenoid loosening. Inset components have been proposed to minimize glenoid loosening by reducing edge-loading and opposite-edge lift-off forces with humeral translation. Successful short- and long-term outcomes have been reported while using inset glenoid implants. The current study is the largest study presenting a minimum of 2-year follow-up data following aTSA with an all-polyethylene inset glenoid component (Shoulder Innovations, Holland, MI, USA).

METHODS

A dual center, retrospective review of patients undergoing aTSA using an Inset glenoid component by 2 fellowship-trained shoulder surgeons at 2 separate institutions from August, 2016, to August, 2019, was performed. Minimum follow-up was 2 years. Range of motion (ROM), visual analog scale (VAS) pain scores, Single Assessment Numeric Evaluation (SANE), and American Shoulder and Elbow Surgeons (ASES) scores were obtained. Radiographic outcomes, including central peg lucency and glenoid loosening, were assessed by 3 independent reviewers on the postoperative Grashey and axillary radiographs obtained at the final follow-up.

RESULTS

Seventy-five shoulders were included for the final analysis. The mean age of the entire cohort was 64 (±11.4) years. Twenty-one (28%) glenoids were type A1, 10 (13.3%) were type A2, 13 (17.3%) were type B1, 22 (29.3%) were type B2, 6 (8%) were type B3, and 3 (4%) were type D. At a minimum follow-up of 24 months (mean: 28.7 months), a significant improvement in ROM in all planes was observed. Significant improvements in VAS (5.1-0.9, P < .001), SANE (39.5-91.2, P < .001), and ASES (43.7-86.6, P < .001) scores were observed. There were 4 (5.3%) cases of central peg lucency about the inset glenoid component and one (1.3%) case of glenoid loosening. No revisions were performed for glenoid loosening.

CONCLUSION

At a minimum of 2 years postoperatively, there were significant improvements in ROM, VAS, SANE, and ASES scores with very low rates of central peg lucency and glenoid loosening in patients undergoing aTSA with an inset glenoid component. Further work is needed to determine the long-term benefit of this novel implant.

Does body mass index influence long-term outcomes after anatomic total shoulder arthroplasty?

BACKGROUND

As of 2018, upwards of 42% of the US adult population was considered obese based on body mass index (BMI) scales. With the annual number of total joint replacements increasing, this study aimed to evaluate the impact BMI has on anatomic total shoulder arthroplasty (aTSA) outcomes.

METHODS

This was a retrospective analysis of 128 shoulders requiring primary aTSA. Patients were stratified into 3 cohorts based on their BMI at surgery: underweight/normal weight (U/NW; BMI ≤25.0), overweight (25.0 < BMI ≤ 30.0), and obese (BMI >30.0). BMI was separately analyzed as a continuous variable. Clinical endpoints were range of motion scores, including forward elevation, external rotation, and internal rotation, and patient-reported outcomes, including visual analog scale (VAS) scores, American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES) scores, and the Simple Shoulder Test (SST). Survivorship curves were calculated using Kaplan-Meier analysis.

RESULTS

Forty-four, 50, and 34 patient shoulders were in the U/NW, overweight, and obese cohorts, respectively. The mean follow-up time was 11.4 years. The U/NW cohort had more females (73%) compared with the overweight (34%; P = .0030) and obese (35%; P = .0015) groups; no differences were seen in revision rates. BMI was negatively correlated with age at surgery (r = -0.19, P = .014); it was not correlated with any of the 6 postoperative clinical endpoints. All 3 cohorts saw significant improvements in forward elevation, external rotation, internal rotation and VAS, ASES, and SST scores when compared preoperatively to postoperatively (P < .001). There were no significant differences between the 3 cohorts with respect to postoperative range of motion. Postoperative ASES scores were higher for the overweight cohort (82.6 ± 18.6) compared with both the U/NW (63.0 ± 25.1) and obese cohorts (70.5 ± 26.8) (P < .001). The overweight cohort also had higher SST (P = .0012) postoperative scores compared with the U/NW and obese cohorts; VAS scores were comparable between groups (P = .12). The nonobese (BMI <30) group (n = 94) showed 5-, 10-, and 15-year implant survival of 98.9%, 94.9%, and 83.9%, respectively compared to 97.1%, 93.7%, and 87.0% in the obese (BMI ≥30) group (n = 34). The log rank test revealed no significant difference in survival curves (P = .82).

CONCLUSION

To our knowledge, this is the longest follow-up study analyzing clinical endpoints stratified by BMI for aTSA. We saw that patients with a higher BMI required shoulder replacement at a significantly younger age. However, we also report that regardless of BMI, all patients saw significant improvements in patient-reported outcomes and range of motion scores postoperatively.

Outcomes After Anatomic and Reverse Shoulder Arthroplasty for the Treatment of Glenohumeral Osteoarthritis: A Propensity Score-Matched Analysis

BACKGROUND

Reverse shoulder arthroplasty (RSA) is increasingly being utilized for the treatment of primary osteoarthritis. However, limited data are available regarding the outcomes of RSA as compared with anatomic total shoulder arthroplasty (TSA) in the setting of osteoarthritis.

METHODS

We performed a retrospective matched-cohort study of patients who had undergone TSA and RSA for the treatment of primary osteoarthritis and who had a minimum of 2 years of follow-up. Patients were propensity score-matched by age, sex, body mass index (BMI), preoperative American Shoulder and Elbow Surgeons (ASES) score, preoperative active forward elevation, and Walch glenoid morphology. Baseline patient demographics and clinical outcomes, including active range of motion, ASES score, Single Assessment Numerical Evaluation (SANE), and visual analog scale (VAS) for pain, were collected. Clinical and radiographic complications were evaluated.

RESULTS

One hundred and thirty-four patients (67 patients per group) were included; the mean duration of follow-up (and standard deviation) was 30 ± 10.7 months. No significant differences were found between the TSA and RSA groups in terms of the baseline or final VAS pain score (p = 0.99 and p = 0.99, respectively), ASES scores (p = 0.99 and p = 0.49, respectively), or SANE scores (p = 0.22 and p = 0.73, respectively). TSA was associated with significantly better postoperative active forward elevation (149° ± 13° versus 142° ± 15°; p = 0.003), external rotation (63° ± 14° versus 57° ± 18°; p = 0.02), and internal rotation (≥L3) (68.7% versus 37.3%; p < 0.001); however, there were only significant baseline-to-postoperative improvements in internal rotation (gain of ≥4 levels in 53.7% versus 31.3%; p = 0.009). The overall complication rate was 4.5% (6 of 134), with no significant difference between TSA and RSA (p = 0.99). Radiolucent lines were observed in association with 14.9% of TSAs, with no gross glenoid loosening. One TSA (1.5%) was revised to RSA for the treatment of a rotator cuff tear. No loosening or revision was encountered in the RSA group.

CONCLUSIONS

When performed for the treatment of osteoarthritis, TSA and RSA resulted in similar short-term patient-reported outcomes, with better postoperative range of motion after TSA. Longer follow-up is needed to determine the ultimate value of RSA in the setting of osteoarthritis.

LEVEL OF EVIDENCE

Therapeutic Level III . See Instructions for Authors for a complete description of levels of evidence.

A validated algorithm using current literature to judge the appropriateness of anatomic total shoulder arthroplasty utilizing the RAND/UCLA appropriateness method

BACKGROUND

Currently, appropriateness criteria evaluating when to perform total shoulder arthroplasty (TSA) is lacking. In the absence of society guidelines and limited quality evidence, the RAND/University California in Los Angeles (UCLA) method provides a suitable alternative to evaluate appropriateness and assist in clinical decision making. Given the rise in utilization, appropriateness criteria for TSA have the potential to be an extremely powerful tool for improving quality of care and controlling costs. Thus, the goal of this study was to test explicit criteria to assess the appropriateness of TSA decision making using the RAND/UCLA appropriateness method.

METHODS

A review of recent scientific literature to gather available evidence about the use, effectiveness, efficiency, and the risks involved in surgical intervention was performed by a shoulder/elbow fellowship trained physician. Based on pertinent variables including age, rotator cuff status, previous surgical management, mobility, symptomatology, and imaging classifications, 186 clinical scenarios were created. Appropriateness criteria for TSA were developed using a modified Delphi method with a panel consisting of American Shoulder and Elbow Surgeons (ASES) members. A second panel of ASES members rated the same scenarios, with reliability testing performed to compare groups.

RESULTS

Panel members reached agreement in 40 (64%) indications. TSA was appropriate in 15 (24%) of indications. For patients with severe symptomatology, TSA was often appropriate for patients aged <75 years and inconclusive or inappropriate for patients aged >75 years. Among patients aged <65 years, TSA varied between appropriate and inconclusive, often dependent on Walch classification. For patients with moderate symptomatology, TSA was inappropriate or inconclusive for patients aged <65 or >75 years. When compared to the second panel's results, moderate agreement was obtained with a weighted kappa statistic of 0.56.

CONCLUSIONS

Using the RAND/UCLA method, ASES members created an appropriateness decision tree for pertinent patient variables. This presents the data in a manner that streamlines the clinical decision-making process and allows for rapid and more reliable determination of appropriateness for practitioners. The decision tree is based on a combination of clinical experience from high-volume ASES-member surgeons and a comprehensive review of current evidence. This tool can be used as part of a broader set of factors, including individual patient characteristics, prior studies, and expert opinion, to inform clinical decision making, improve quality of care, and control costs.

Substantial Inconsistency and Variability Exists Among Minimum Clinically Important Differences for Shoulder Arthroplasty Outcomes: A Systematic Review

BACKGROUND

As the value of patient-reported outcomes becomes increasingly recognized, minimum clinically important difference (MCID) thresholds have seen greater use in shoulder arthroplasty. However, MCIDs are unique to certain populations, and variation in the modes of calculation in this field may be of concern. With the growing utilization of MCIDs within the field and value-based care models, a detailed appraisal of the appropriateness of MCID use in the literature is necessary and has not been systematically reviewed.

QUESTIONS/PURPOSES

We performed a systematic review of MCID quantification in existing studies on shoulder arthroplasty to answer the following questions: (1) What is the range of values reported for the MCID in commonly used shoulder arthroplasty patient-reported outcome measures (PROMs)? (2) What percentage of studies use previously existing MCIDs versus calculating a new MCID? (3) What techniques for calculating the MCID were used in studies where a new MCID was calculated?

METHODS

The Embase, PubMed, and Ovid/MEDLINE databases were queried from December 2008 through December 2020 for total shoulder arthroplasty and reverse total shoulder arthroplasty articles reporting an MCID value for various PROMs. Two reviewers (DAK, MAM) independently screened articles for eligibility, specifically identifying articles that reported MCID values for PROMs after shoulder arthroplasty, and extracted data for analysis. Each study was classified into two categories: those referencing a previously defined MCID and those using a newly calculated MCID. Methods for determining the MCID for each study and the variability of reported MCIDs for each PROM were recorded. The number of patients, age, gender, BMI, length of follow-up, surgical indications, and surgical type were extracted for each article. Forty-three articles (16,408 patients) with a mean (range) follow-up of 20 months (0.75 to 68) met the inclusion criteria. The median (range) BMI of patients was 29.3 kg/m2 (28.0 to 32.2 kg/m2), and the median (range) age was 68 years (53 to 84). There were 17 unique PROMs with MCID values. Of the 112 MCIDs reported, the most common PROMs with MCIDs were the American Shoulder and Elbow Surgeons (ASES) (23% [26 of 112]), the Simple Shoulder Test (SST) (17% [19 of 112]), and the Constant (15% [17 of 112]).

RESULTS

The ranges of MCID values for each PROM varied widely (ASES: 6.3 to 29.5; SST: 1.4 to 4.0; Constant: -0.3 to 12.8). Fifty-six percent (24 of 43) of studies used previously established MCIDs, with 46% (11 of 24) citing one study. Forty-four percent (19 of 43) of studies established new MCIDs, and the most common technique was anchor-based (37% [7 of 19]), followed by distribution (21% [4 of 19]).

CONCLUSION

There is substantial inconsistency and variability in the quantification and reporting of MCID values in shoulder arthroplasty studies. Many shoulder arthroplasty studies apply previously published MCID values with variable ranges of follow-up rather than calculating population-specific thresholds. The use of previously calculated MCIDs may be acceptable in specific situations; however, investigators should select an anchor-based MCID calculated from a patient population as similar as possible to their own. This practice is preferable to the use of distribution-approach MCID methods. Alternatively, authors may consider using substantial clinical benefit or patient-acceptable symptom state to assess outcomes after shoulder arthroplasty.

CLINICAL RELEVANCE

Although MCIDs may provide a useful effect-size based alternative to the traditional p value, care must be taken to use an MCID that is appropriate for the particular patient population being studied.

Reverse shoulder arthroplasty yields similar results to anatomic total shoulder arthroplasty for the treatment of humeral head avascular necrosis

BACKGROUND

Avascular necrosis (AVN) of the humeral head frequently results in humeral head collapse and end-stage arthritic changes of the glenohumeral joint. Despite the recent proliferation of reverse total shoulder arthroplasty (RTSA), reports on the use of RTSA for AVN remain limited. The purpose of this study was to document the outcomes of shoulders indicated for RTSA in the setting of humeral head AVN and compare these with AVN shoulders indicated for the gold standard, anatomic total shoulder arthroplasty (aTSA).

METHODS

A retrospective review of a multinational shoulder arthroplasty database was performed between August 2005 and August 2017. All shoulders with a preoperative diagnosis of AVN (aTSA in 52 and RTSA in 67) were reviewed. The shoulders in the RTSA cohort were matched (1:1) to shoulders with cuff tear arthropathy, whereas the shoulders in the aTSA cohort were matched (1:1) to shoulders with primary osteoarthritis. The mean follow-up period was 47 months (range, 24-130 months) for RTSA and 54 months (range, 24-124 months) for aTSA. Shoulders were evaluated for active range of motion (ROM) and patient-reported outcome measures (PROMs) prior to surgery and at latest follow-up. Patients treated with RTSA were compared with both the aTSA study cohort and the control group using the Student t test or χ² test as indicated.

RESULTS

RTSAs performed for AVN demonstrated significant improvements in all ROMs and PROMs. Patients undergoing aTSA for AVN were significantly younger than those undergoing RTSA (59 years vs. 73 years, P < .001). At similar follow-up points, the RTSA cohort demonstrated significantly greater improvement in abduction (+51° vs. +32°, P = .03) whereas the aTSA cohort demonstrated significantly greater improvement in internal rotation. Postoperative University of California, Los Angeles scores (30 vs. 27, P = .014) and visual analog scale scores (1.4 vs. 2.4, P = .025) were better after RTSA; however, these differences between prosthesis types did not exceed the minimal clinically important difference. When compared with the control patients, the patients undergoing RTSA for AVN showed similar improvements in all ROMs and PROMs. Similarly, aTSA performed for AVN resulted in comparable improvements in pain, ROMs, and PROMs compared with aTSA performed for primary osteoarthritis.

CONCLUSION

RTSA results in similar PROMs to aTSA in the treatment of AVN. Therefore, surgeons should continue to consider other patient factors such as glenoid bone loss and rotator cuff status when selecting implant polarity in patients with AVN.

Evaluation of clinical and radiographic outcomes after total shoulder arthroplasty with inset Trabecular Metal-backed glenoid

BACKGROUND

Trabecular Metal (TM)-backed glenoid implants were introduced for their theoretical ability to increase osseointegration while minimizing wear and the risk of loosening in total shoulder arthroplasty (TSA). Initial follow-up studies of TM-backed glenoids demonstrated high rates of metallic debris formation around the implant site, raising concerns about longevity. More recent data suggest that metallic debris formation may be less prevalent than previously reported and that the implants may have positive long-term outcomes regardless of debris. The goal of our study was to assess the clinical and radiographic outcomes at mid-term follow-up of TSA using a TM-backed glenoid implant placed with full backside support using an inset technique. We hypothesized that our clinical and radiographic outcomes would be good using this technique.

METHODS

We retrospectively reviewed the charts of 39 patients who underwent 41 TSA procedures with a Zimmer Biomet TM-backed glenoid component performed by a single surgeon between January 2010 and March 2016. After exclusions for death unrelated to surgery and loss to follow-up, 35 patients (37 shoulders) with minimum 2-year clinical follow-up were included in the study. The glenoids were all placed in an inset fashion with full backside support. Clinical, patient-reported, and radiographic outcomes were analyzed.

RESULTS

The average follow-up period was 7.2 years (range, 2-11 years). At final follow-up, average shoulder elevation was 153° ± 22° and average external rotation was 53° ± 12°. The average American Shoulder and Elbow Surgeons score was 86.8 ± 19.0, and the average visual analog scale score was 1.3 ± 2.4. Metallic debris was found in 9 shoulders (27%), and radiolucency was observed around the glenoid components in 13 shoulders (39%) on the final postoperative radiographs. Metallic debris and radiolucency findings were low in severity, with average grades of 0.32 (standard deviation, 0.54) and 0.39 (standard deviation, 0.50), respectively. There were no reoperations.

CONCLUSION

This study of 37 shoulders undergoing TSA with a TM-backed glenoid demonstrated 100% implant survivorship at an average follow-up of 7 years. Clinical outcomes were excellent despite the occurrence of some metallic debris formation. The findings suggest that a TM-backed glenoid component implanted in an inset fashion to achieve full backside support can provide good clinical and patient-reported outcomes in TSA patients at mid-term follow-up and suggest that continued consideration of the role of TM-backed glenoids and the optimal technique for implantation may be warranted.

Deltoid fatigue part 2: a longitudinal assessment of anatomic total shoulder arthroplasty over time

BACKGROUND

Gradual loss of overhead range of motion (ROM) has been observed after reverse shoulder arthroplasty (RSA). It remains unclear if this is caused by the effect of RSA design on muscle fiber lengthening or is part of the natural aging process of the shoulder musculature. Although studies have attempted to evaluate deltoid fatigue after RSA, there is a paucity of literature evaluating this effect after anatomic shoulder arthroplasty (aTSA), which would be expected to occur due to aging alone. The purpose of this study is to evaluate the effect of time on overhead ROM after aTSA and compare this with previous data on a similar cohort of RSAs. We hypothesized that overhead ROM would decrease gradually over time in both groups without differences between prosthesis types.

METHODS

A retrospective review of 384 aTSAs without complications was performed over a 10-year period. All shoulders were treated for primary osteoarthritis using a single implant system. Patients were evaluated longitudinally at multiple postoperative time points. At least 1 follow-up visit was between 1 and 2 years postoperatively and another at least 5 years after surgery. ROM and patient reported outcome measures (PROMs) were evaluated using linear-mixed models for repeated measures. These results were compared with a previously evaluated cohort of 165 well-functioning RSAs analyzed using the same methodology.

RESULTS

Primary aTSA shoulders were observed to lose 0.7° of abduction per year starting 1 year postoperatively (P = .001). Smaller losses were observed in external rotation (-0.3°/yr, P = .06) and internal rotation (-0.04/yr, P < .001). However, no significant losses were observed in forward elevation (P = .8). All PROMs diminished slowly over time, but these changes did not exceed the minimally clinically important difference when modeled over 10 years (Simple Shoulder Test -0.08/yr, P < .001; American Shoulder Elbow Surgeons -0.5/yr, P < .001; University of California Los Angeles Shoulder Score -0.2/yr, P < .001). When compared with a similarly analyzed cohort of RSAs, overhead ROM decreased at a slower rate in the aTSA cohort (abduction -0.7° vs. -0.8°/yr, P = .9; FE -0.06° vs. -0.8°/yr, P = .05).

DISCUSSION

In the well-functioning aTSA, gradual loss of ROM occurs in all planes of motion except forward elevation. However, these losses are small and have little meaningful impact relative to minimally clinically important difference thresholds on PROMs. Progressive loss of abduction seen in both aTSA and RSA is likely secondary to aging of the periscapular and rotator cuff musculature. When compared with RSA, loss of motion after aTSA was statistically similar, calling into question the belief that RSA-induced deltoid fatigue leads to loss of overhead motion over time.

Anatomic versus reverse shoulder arthroplasty: a mid-term follow-up comparison

BACKGROUND

Anatomic total shoulder arthroplasty improves pain and function with a reported reoperation rate of approximately 1% per year. With improved glenoid fixation, reverse shoulder arthroplasty implants may outperform anatomic total shoulder arthroplasty. We evaluate the functional outcomes and reoperation rate of anatomic total shoulder arthroplasty versus reverse shoulder arthroplasty at a minimum eight-year follow-up or revision.

METHODS

Between 2005 and 2010, 187 shoulders (137 anatomic total shoulder arthroplasty, 50 reverse shoulder arthroplasty) were retrospectively reviewed at a mean of 8.8 years. The mean age at surgery was 67 years. Females were more commonly treated with reverse shoulder arthroplasty. Both groups had similar body mass index and comorbidities. Outcome measures evaluated included abduction, forward elevation, external rotation, internal rotation, Simple Shoulder Test, Constant score, American Shoulder and Elbow Score, University of California Los Angeles Shoulder score, and Shoulder Pain and Disability Index.

RESULTS

At follow-up, anatomic total shoulder arthroplasty demonstrated greater overhead range of motion and external rotation. All patient-reported outcomes remained similar between groups. Reverse shoulder arthroplasty patients were more likely to rate shoulders as much better or better after surgery (90% versus 67%, p = 0.004). Complications were observed in 24% of anatomic total shoulder arthroplasties and 8% of reverse shoulder arthroplasties (p = 0.02). Reoperation was more common in anatomic total shoulder arthroplasties (23% versus 4%, p = 0.003).

DISCUSSION

At mid-to-long-term follow-up, reverse shoulder arthroplasties demonstrated significantly fewer complications and reoperations than anatomic total shoulder arthroplasties. Despite similar patient-reported outcomes, reverse shoulder arthroplasty patients were more likely to be satisfied with their shoulder.

Articular surface failure in hybrid anatomic glenoid components: a unique failure mechanism

PURPOSE

Glenoid loosening is a common failure mechanism of anatomic total shoulder arthroplasty (TSA). New hybrid fixation glenoids allow bony ingrowth and decrease the rates of glenoid loosening. The purpose of this study is to describe a new failure mode of polyethylene dissociation from the ingrowth cage in a single implant design.

METHODS

A retrospective review was performed using an institutional shoulder arthroplasty database of a single hybrid cage glenoid (Exactech, Gainesville, FL). Implants demonstrating this failure mechanism were investigated.

RESULTS

Five out of 206 (2.4%) primary TSAs with cage glenoids performed at our institution and 2 referred for revision suffered glenoid articular face failure. Mean age was 57 (range 38-67 years). Two of 7 failures (29%) occurred secondary to trauma. Failure occurred at mean 14 months after index arthroplasty (range 0-30 months). Revision occurred at mean 24 months after index arthroplasty (range 6-39 months). Six of the 7 patients (86%) had posteriorly augmented glenoids. All 6 patients who had available pre-failure radiographs demonstrated off-axis deviation between the peripheral pegs and central cage (mean 4.8°, range 3°-6°), which may predispose the implant to failure by pre-stressing the material interface.

CONCLUSION

Failure between the glenoid articular face and the central ingrowth cage is a unique failure mechanism to modular hybrid ingrowth glenoids. We hypothesize that this is predisposed by off-axis drilling leading to pre-stressing of the material interface. Surgeons should be aware of the existence of this failure mechanism, particularly when seeing patients with acute pain after an otherwise unproblematic TSA.

Central-peg radiolucency progression of an all-polyethylene glenoid with hybrid fixation in anatomic total shoulder arthroplasty is associated with clinical failure and reoperation

BACKGROUND

Glenoid component loosening is a common cause of failure after anatomic total shoulder arthroplasty. Prior studies of all-polyethylene glenoid implants with hybrid fixation did not show early glenoid radiolucency to be clinically significant. The purpose of this study was to determine the clinical significance of progression of radiolucency around the central peg of the glenoid component.

METHODS

We identified 73 shoulders that underwent primary anatomic total shoulder arthroplasty between January 1995 and May 2015 for osteoarthritis with an all-polyethylene pegged glenoid, with a minimum follow-up interval of 2 years between early and late follow-up. Demographic, radiographic (central-peg osteolysis [CPO] and central-peg grading [CPG]), and outcome variables comprising the Penn Shoulder Score (PSS) and revision surgery were collected. Clinical failure was defined as a PSS decrease >11.4 points (ie, PSS failure) or revision surgery.

RESULTS

The average patient age at surgery was 65 ± 7 years, and 63% of patients were men. The median initial follow-up period was 14 months (interquartile range, 12-25 months), and the final median follow-up period was 56 months (interquartile range, 47-69 months). Revision surgical procedures were performed in 4 patients, and 17 PSS failures occurred. We found that CPO at final follow-up, CPG progression, and worse PSS at follow-up were associated with revision surgery (P < .05). We also found younger age at surgery, CPO at final follow-up, CPG progression, and greater glenoid component retroversion at final follow-up to be associated with clinical failure (PSS failure or revision surgery) (P < .05). Multivariate analysis found only CPG progression to be associated with clinical failure (P < .001).

DISCUSSION AND CONCLUSION

CPO and CPG progression were associated with clinical failure, defined as decreasing clinical outcome scores or revision surgery.

Does commercially available shoulder arthroplasty preoperative planning software agree with surgeon measurements of version, inclination, and subluxation?

BACKGROUND

Preoperative planning with commercially available imaging software in shoulder arthroplasty may allow for improved decision-making and more accurate placement of the glenoid component.

METHODS

A total of 81 consecutive shoulder computed tomography scans obtained for preoperative planning purposes for shoulder arthroplasty were analyzed by commercially available software from 4 companies (Blueprint: Wright Medical, Memphis, TN, USA; GPS: Exactech, Gainesville, FL, USA; Materialise: DJO, Vista, CA, USA; and VIP: Arthrex, Naples, FL, USA) and by 5 fellowship-trained sports medicine/shoulder surgeons. Inclination, version, and subluxation of the humerus were measured in a blinded fashion on axial and coronal sequences at the mid-glenoid. Surgeon measurements were analyzed for agreement and were compared with the 4 commercial programs.

RESULTS

Surgeon reliability was acceptable for version (intraclass correlation coefficient [ICC]: 0.876), inclination (ICC: 0.84), and subluxation (ICC: 0.523). Significant differences were found between surgeon and commercial software measurements in version (P = .03), inclination (P = .023), and subluxation (P < .001). Software measurements tended to be more superiorly inclined (average -2° to 2° greater), more retroverted (average 2°-5° greater), and more posteriorly subluxed (average 7°-10° greater) than surgeon measurements. In comparing imaging software measurements, only Blueprint was found to produce significantly different version measurements than surgeon measurements (P = .02).

CONCLUSION

Preoperative planning software for shoulder arthroplasty has limited agreement in measures of version, inclination, and subluxation measurements, whereas surgeons have high inter-reliability. Surgeons should be cautious when using commercial software planning systems and when comparing publications that use different planning systems to determine preoperative glenoid deformity measurements.

Glenoid Component Loosening in Anatomic Total Shoulder Arthroplasty: Association between Radiological Predictors and Clinical Parameters-An Observational Study

The mechanisms of glenoid component loosening in anatomic total shoulder arthroplasty (aTSA) are still unclear, and it remains undetermined which specific radiographic features are associated with clinical outcomes. Patients with primary osteoarthritis who underwent aTSA with a stemless implant and a pegged glenoid between January 2011 and December 2016 were extracted from a local registry. Anteroposterior radiographs were evaluated at six, 12, 24 months, and five years post-TSA for lateral humeral offset (LHO), joint gap (JG), acromiohumeral distance (AHD), and radiolucency (modified Franklin score); 147 patients were included. Mixed-model linear regression was used. Both constant score (CS) and subjective shoulder value (SSV) markedly decreased at five years follow-up compared to one year (p < 0.001 for both). AHD, LHO, and JG all showed a consistent and statistically significant decline over time, with the joint gap decreasing by half. Consistently, smaller JG and AHD were correlated with lower SSV (p = 0.03 and p = 0.07, respectively). Massive loosening was associated with a 14.5 points lower SSV (p < 0.01). Finally, narrowing of the JG was significantly correlated with increased radiolucency (p < 0.001) and tended toward worse SSV (p = 0.06). In summary, radiographic parameters displaying medialization and cranialization after aTSA with a cemented pegged glenoid are useful predictors of impaired shoulder function.

Computer navigation leads to more accurate glenoid targeting during total shoulder arthroplasty compared with 3-dimensional preoperative planning alone

BACKGROUND

Commercially available preoperative planning software is now widely available for shoulder arthroplasty. However, without the use of patient-specific guides or intraoperative visual guidance, surgeons have little in vivo feedback to ensure proper execution of the preoperative plan. The purpose of this study was to assess surgeons' ability to implement a preoperative plan in vivo during shoulder arthroplasty.

METHODS

Fifty primary shoulder arthroplasties from a single institution were retrospectively reviewed. All surgical procedures were planned using a commercially available software package with both multiplanar 2-dimensional computed tomography and a 3-dimensional implant overlay. Following registration of intraoperative visual navigation trackers, the surgeons (1 attending and 1 fellow) were blinded to the computer navigation screen and attempted to implement the plan by simulating placement of a central-axis guide pin. Malposition was assessed (>4 mm of displacement or >10° error in version or inclination). Data were then blinded, measured, and evaluated.

RESULTS

Mean displacement from the planned starting point was 3.2 ± 2.0 mm. The mean error in version was 6.4° ± 5.6°, and the mean error in inclination was 6.6° ± 4.9°. Malposition was observed in 48% of cases after preoperative planning. Malposition errors were more commonly made by fellow trainees vs. attending surgeons (58% vs. 38%, P = .047).

CONCLUSIONS

Despite preoperative planning, surgeons of various training levels were unable to reproducibly replicate the planned component position consistently. Following completion of fellowship training, significantly less malposition resulted. Even in expert hands, the orientation of the glenoid component would have been malpositioned in 38% of cases. This study further supports the benefit of guided surgery for accurate placement of glenoid components, regardless of fellowship training.

Integração óssea e prevalência de linhas radiotransparentes ao redor dos pinos de componentes glenoidais minimamente cimentados na artroplastia total de ombro

Objectives  Glenoid component failure is the main cause of total shoulder arthroplasty (TSA) revision, and component design seems to influence the failure rate. The aim of the present study was to clinically and radiographically (through X-rays and computed tomography scan) evaluate the results of TSA using a minimally cemented glenoid component.

Methods  Total should arthroplasties performed using the minimally cemented Anchor Peg (DuPuy Synthes, Warsaw, IN, USA) glenoid component between 2008 and 2013 were evaluated. University of California at Los Angeles (UCLA) scores were calculated, and standardized plain film and computed tomography images were obtained, at a minimum follow-up of 24 months. The presence of bone between the fins of the central component peg, which indicates its integration, was assessed on the images, as well the presence of radiolucent lines around the glenoid component.

Results  Nineteen shoulders in 17 patients were available for evaluation. According to the UCLA score, clinical results were satisfactory in 74% of cases and fair in 21% of cases. One patient had a poor result. Component integration was found in 58% of patients (total in 42% and partial in 16%). Radiolucent lines were observed in 52% of cases. No relationship was detected between component integration and clinical results.

Conclusion  Satisfactory clinical results were achieved in most patients undergoing TSA using a minimally cemented glenoid component. Radiolucent lines around the glenoid component are common, but do not interfere with the clinical results.

Level of evidence IV; Case series; Treatment study.

Humeral stem lucencies correlate with clinical outcomes in anatomic total shoulder arthroplasty

Background

Humeral stem lucencies are uncommon after uncemented anatomic total shoulder arthroplasty (aTSA), and their clinical significance is unknown. This study compares clinical outcomes of aTSA with and without humeral stem lucencies.

Methods

Two-hundred eighty aTSAs using an uncemented grit-blasted metaphyseal-fit humeral stem between 2005 and 2013 were retrospectively evaluated for radiographic humeral stem lucencies. All shoulders were evaluated at a minimum 5-year follow-up from a multicenter database. Clinical outcomes included range of motion (ROM) and American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES) score, Constant score, University of California-Los Angeles Shoulder Score (UCLA), Simple Shoulder Test (SST), and Shoulder Pain and Disability Index (SPADI) scores. Postoperative radiographs were evaluated and complications were recorded.

Results

Two-hundred forty-three humeral stems showed no radiolucent lines. Among the 37 humeral stems with lucent lines, lines were most common in zones 8, 4, 7, and 3. Preoperative ROM and functional outcomes were similar between groups. Postoperative change in outcomes exceeded the minimal clinically important difference (MCID) for all ROM and outcomes in both groups. Postoperative change between groups showed no significant difference in ROM or outcome scores, but improved mean abduction exceeded the MCID in the patients without humeral lines. The complication rate after omitting patients with humeral loosening was higher in patients with humeral lucencies, as was the revision rate. There was also a higher glenoid-loosening rate in patients with humeral lucencies.

Conclusion

Humeral lucent lines after uncemented stemmed aTSA have a small negative effect on ROM and functional outcomes compared with patients without lucent humeral lines, which may not be clinically significant. The complication and revision rates were significantly higher in patients with humeral lucencies.

Porous metal wedge augments to address glenoid retroversion in anatomic shoulder arthroplasty: midterm update

BACKGROUND

Wedge-shaped porous metal augments were used to address bone deficiency in shoulder arthroplasty as part of a hybrid combination of high-density polyethylene, polymethyl methacrylate bone cement, and porous metal implant. This article presents an ongoing review of the use of the generically designed augments in the shoulder to address glenoid retroversion as part of anatomic total shoulder arthroplasty (aTSA).

MATERIALS

Seventy-five shoulders in 66 patients (23 women and 43 men, aged 42-85 years) with Walch grade B2 or C glenoids underwent porous metal glenoid augment (PMGA) insertion as part of aTSA. Patients underwent preoperative 3-dimensional (3D) templating; based on that planning, patients received either a 15° or 30° PMGA wedge (secured by screws to the native glenoid) to correct excessive glenoid retroversion before a standard glenoid component was implanted using bone cement. Neither patient-specific guides nor navigation were used. Intraoperative glenoid alignment was assessed using a reusable guide that referenced the anterior scapular neck. Patients were prospectively assessed using shoulder functional assessments (Oxford Shoulder Score [OSS], American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form [ASES], visual analog scale [VAS] pain scores, and forward elevation [FE]) preoperatively; at 3, 6, and 12 months postoperation; and yearly thereafter, with similar radiologic surveillance.

RESULTS

Of the total consecutive series, 49 shoulders had a follow-up of greater than 24 months, with a median follow-up of 48 months (range: 24-87 months). For this cohort, median outcome scores improved for OSS (21 to 44), ASES (24 to 92), VAS (7 to 0), and FE (90° to 140°) from preoperative outcomes to the most recent review, respectively. Four patients died, but no others were lost to follow-up. Apart from 1 infection at 18 months postoperatively and 1 minor peg perforation, there were no complications, hardware failures, implant displacements, significant lucency, or posterior resubluxations. Radiographs showed good incorporation of the wedge augment, with correction of glenoid retroversion from median 22° (13° to 46°) to 4° (17° to anteversion 16°). All but 4 glenoids were corrected to within the target range (less than 10° retroversion), and only 2 glenoid components were implanted outside 15° of neutral glenoid version.

CONCLUSIONS

The porous metal wedge-shaped augments effectively addressed posterior glenoid deficiency as part of aTSA for rotator cuff intact osteoarthritis, producing satisfactory clinical outcomes with no signs of impending future failure.

The effect of radial mismatch on radiographic glenoid loosening

Background

Methods

Results

Discussion