The relationship between glenoid inclination and instability following primary reverse shoulder arthroplasty

Learning curve of augmented reality surgical application for reverse shoulder arthroplasty

BACKGROUND

Accurate positioning of the glenoid component in reverse total shoulder arthroplasty is important since it reduces prosthesis-related complications. Conventional instrumentation is still the gold standard. However, patient-specific instrumentation using 3-D printed guides, as well as computer-assisted navigation, is gaining more and more importance. Augmented reality has been established to enable the surgeon to have more precision in the positioning and inclination of the glenoid component. A new technique called "NextAR" (©Medacta) supports the surgeon during operation by guidance on bone preparation, instrument navigation, and implant placement, using virtual reality goggles or displays. The aim of this study was to determine a learning curve for reversed total shoulder arthroplasty by a high-volume single shoulder surgeon using the NextAR system.

METHODS

We performed retrospective data analysis of the first 20 cases of one high-volume single shoulder surgeon performing reversed total shoulder arthroplasty using the NextAR system. Parameters such as anesthesia time, surgical time, length of hospital stay, classification of the American Society of Anesthesiologists, body mass index, intraoperative blood loss, and complications were analyzed.

RESULTS

We found significant decreases in measures like surgery time (p = 0,001), amount of blood loss during surgery (p = 0,005), and anesthesia time (p = 0,08). A remarkable turning point of blood loss occurs within the fifteenth surgery. A significant reduction of the operation time is shown at the fourteenth operation. Looking at blood loss and operation time together using a standardized cumulative curve, a significant reduction of the cumulative score is found within the fifteenth surgery.

CONCLUSION

Significance was found in surgery time as well as in the amount of blood loss. However, these results may not be generalizable since they depend on further conditions. Future studies could provide information about other outcome parameters and learning curves of several surgeons performing reversed total shoulder arthroplasty with augmented reality applications.

The reverse shoulder arthroplasty angle may contribute to overt inferior inclination: comparison with alternative parameters

PURPOSE

Radiographic measurements have gained wide acceptance in anticipating the risk of inappropriate glenoid component positioning in reverse shoulder arthroplasty (RSA). This study aims to investigate whether the RSA angle overcorrects the base plate inclination, tilting it inferiorly, compared to the base plate correction angle (BCA), which provides neutral inclination and lateralization.

METHODS

One hundred normal anteroposterior shoulder radiographs were evaluated to determine the average values of the RSA angle, BCA, base plate orientation angle (BOA), and the base plate shoulder angle (BSA), which represents the amount of overcorrection accomplished via the RSA angle beyond the BCA's scope. The interobserver reliability among two independent testers was assessed by the intraclass correlation coefficient. A t-test was applied to compare the mean values of the BCA and RSA angle.

RESULTS

The mean BOA and BCA values were 118° ± 5.7° and 17° ± 4.6°, respectively. The RSA angle value was 23° ± 6°. Compared to the BCA, the RSA angle overcorrected the base plate inclination by 15° ± 5° (BSA). The Student's t-test showed a statistically significant difference between the values of the BCA and RSA angle (p-value = 0.000). The interobserver reliability was excellent for all angle measurements among two independent testers.

CONCLUSION

The RSA angle and the BOA/BCA are reliable radiographic measurements to determine the inclination of the inferior glenoid segment prior to RSA. However, surgeons need to consider the inherent inferior inclination associated with positioning the base plate according to the RSA angle (15° ± 5°).

Does glenoid inclination affect the anterior stability of reverse total shoulder arthroplasty? A biomechanical study

PURPOSE

The anterior stability of reverse total shoulder arthroplasty is affected by multiple factors. However, the effect of glenosphere inclination on stability has rarely been investigated, which is what this study aims to look into.

METHODS

Reverse shoulder arthroplasty was performed on 15 cadaveric human shoulders. The anterior dislocation forces and range of motion in internal rotation in the glenohumeral joint (primary measured parameters) were tested in a shoulder simulator in different arm positions and implant configurations, as well as with a custom-made 10° inferiorly inclined glenosphere. The inclination and retroversion of the baseplate as well as the distance between the glenoid and coracoid tip in two planes (secondary measured parameters) were evaluated on CT scans.

RESULTS

In biomechanical testing, the custom-made inclined glenosphere showed no significant influence on anterior stability other than glenoid lateralisation over all arm positions as well as the neck-shaft angle in two arm positions. The 6 mm lateralised glenosphere reduced internal rotation at 30° and 60° of glenohumeral abduction. In 30° of glenohumeral abduction, joint stability was increased using the 155° epiphysis compared with the 145° epiphysis. The mean inclination was 16.1°. The inclination was positively, and the distance between the glenoid and coracoid tip in the anterior-to-posterior direction was negatively correlated with anterior dislocation forces.

CONCLUSIONS

The custom-made inferiorly inclined glenosphere did not influence anterior stability, but baseplate inclination itself had a significant effect on stability.

The Influence of Component Design and Positioning on Soft-Tissue Tensioning and Complications in Reverse Total Shoulder Arthroplasty: A Review

» Reverse total shoulder arthroplasty was designed to function in the rotator cuff deficient shoulder by adjusting the glenohumeral center of rotation (COR) to maximize deltoid function.» Adjustments in the COR ultimately lead to changes in resting tension of the deltoid and remaining rotator cuff, which can affect implant stability and risk of stress fracture.» Soft-tissue balance and complication profiles can be affected by humeral component (version, neck shaft angle, and inlay vs. onlay) and glenoid component (sagittal placement, version, inclination, and lateralization) design and application.» A good understanding of the effects on soft-tissue balance and complication profile is critical for surgeons to best provide optimal patient outcomes.

The Value of Computed Tomography-Based Planning in Shoulder Arthroplasty Compared to Intra-/Interobserver Reliability of X-ray Planning

Background: Reversed total shoulder arthroplasty (RTSA) is an established surgery for many pathologies of the shoulder and the demand continues to rise with an aging population. Preoperative planning is mandatory to support the surgeon's understanding of the patient's individual anatomy and, therefore, is crucial for the patient's outcome. Methods: In this observational study, we identified 30 patients who underwent RTSA with two- and three-dimensional preoperative planning. Each patient underwent new two-dimensional planning from a medical student and an orthopedic resident as well as through a mid-volume and high-volume shoulder surgeon, which was repeated after a minimum of 4 weeks. The intra- and interobserver reliability was then analyzed and compared to the 3D planning and the implanted prosthesis. The evaluated parameters were the size of the pegged glenoid baseplate, glenosphere, and humeral short stem. Results: The inter-rater reliability showed higher deviations in all four raters compared to the 3D planning of the base plate, glenosphere, and shaft. The intra-rater reliability showed a better correlation in more experienced raters, especially in the planning of the shaft. Conclusions: Our study shows that 3D planning is more accurate than traditional planning on plain X-rays, despite experienced shoulder surgeons showing better results in 2D planning than inexperienced ones.

Ten technical aspects of baseplate fixation in reverse total shoulder arthroplasty for patients without glenoid bone loss: a systematic review

The aim of this systematic review was to collect evidence on the following 10 technical aspects of glenoid baseplate fixation in reverse total shoulder arthroplasty (rTSA): screw insertion angles; screw orientation; screw quantity; screw length; screw type; baseplate tilt; baseplate position; baseplate version and rotation; baseplate design; and anatomical safe zones. Five literature libraries were searched for eligible clinical, cadaver, biomechanical, virtual planning, and finite element analysis studies. Studies including patients >16 years old in which at least one of the ten abovementioned technical aspects was assessed were suitable for analysis. We excluded studies of patients with: glenoid bone loss; bony increased offset-reversed shoulder arthroplasty; rTSA with bone grafts; and augmented baseplates. Quality assessment was performed for each included study. Sixty-two studies were included, of which 41 were experimental studies (13 cadaver, 10 virtual planning, 11 biomechanical, and 7 finite element studies) and 21 were clinical studies (12 retrospective cohorts and 9 case-control studies). Overall, the quality of included studies was moderate or high. The majority of studies agreed upon the use of a divergent screw fixation pattern, fixation with four screws (to reduce micromotions), and inferior positioning in neutral or anteversion. A general consensus was not reached on the other technical aspects. Most surgical aspects of baseplate fixation can be decided without affecting fixation strength. There is not a single strategy that provides the best outcome. Therefore, guidelines should cover multiple surgical options that can achieve adequate baseplate fixation.

Relationship between the prosthesis scapular neck angle and clinical outcomes in reverse shoulder arthroplasty

Background

Optimal glenosphere positioning in reverse shoulder arthroplasty (RSA) remains highly debated. We aimed to characterize the association between the prosthesis scapular neck angle (PSNA) and postoperative range of motion (ROM) and clinical outcome scores.

Methods

A retrospective review of 284 RSAs using a single design with minimum 2-year follow-up was performed. Glenosphere tilt was measured postoperatively using PSNA. ROM and functional outcome scores were assessed preoperatively and at latest follow-up. The PSNA was dichotomized to inferior or superior groups (>90° vs ≤ 90°, respectively) and stratified into quartiles; ROM and outcome score measures were compared between groups controlling for inferior glenosphere overhang.

Results

No range of PSNA was consistently associated with superior ROM, clinical outcome scores, or rates of complications including scapular notching. However, greater preoperative to postoperative improvement in active FE was found for superiorly (PSNA ≤ 90°) versus inferiorly tilted glenospheres (37° ± 33° vs 53° ± 35°, P  =  0.005) and the greater improvement in active FE (57° ± 35°, P  =  0.004) was further isolated to the first quartile (mean 85.1° ± 3.5°).

Discussion

A lack of variation in clinical outcomes based on PSNA suggests negligible short-term (median follow-up 3.1 years) clinical significance when glenosphere tilt falls within the distribution of this cohort (mean 92.6° ± 6.2°).

The base plate orientation angle: a plain radiographic technique for designing the base plate's inclination in reverse shoulder arthroplasty

Background

Superior inclination of the base plate in reverse shoulder arthroplasty (RSA) is underestimated and may lead to major setbacks in terms of functional outcomes due to the altered biomechanics. Joint instability, scapular notching, and loosening of the glenoid component are considered the most serious sequelae. Therefore, a thorough preoperative radiological assessment of the affected shoulder joint and customized design of the prosthesis according to the glenoid morphology are decisive and directly correlated to the outcome. In this article, we propose a simple radiographic technique to assess the inclination of the glenoid preoperatively, which identifies the need for intraoperative correction.

Materials and Methods

One hundred inconspicuous shoulder radiographs were included in the control group (CG) to define the normal ranges of the base plate orientation angle (BOA) and the base plate correction angle (BCA). Further, both angles were measured on 2-dimensional (2D) computed tomography scans of patients with proximal humerus fractures as well as radiographs, 2D and 3-dimensional (3D) computed tomography scans of patients with cuff tear arthropathy who underwent RSA between 2018 and 2021. The interobserver reliability among three independent testers was evaluated by calculating the intraclass correlation coefficient. In cuff tear arthropathy cases, the BOA and BCA measurements on different imaging modalities were compared using the Wilcoxon test. Possible variations of both angles' values based on glenoid erosion types, according to the Favard classification, were also investigated.

Results

Regardless of the imaging modality used, the interobserver reliability was excellent among three independent observers. In the CG, the mean BOA and BCA values were 118° ± 6° and 17° ± 5°, respectively. The mean corrected BOA values of the CG and fracture group were 136° ± 5° and 140° ± 5°, respectively. In contrast to the BCA values, the BOA measurements on radiographs showed a statistically significant difference compared to those obtained on 2D- and 3D scans in the cuff arthropathy group. Further, both angles' values varied according to the extent and location of the glenoid erosion. The lowest mean BOA and highest mean BCA values were observed in cases with Favard glenoid type E3.

Conclusions

The BOA and the BCA are reliable tools proposed to aid in precisely positioning the glenoid component in RSA in the preoperative setting. Whereas, the BOA determines the inclination of the inferior glenoid segment, the BCA represents the extent of correction required to obtain a neutral inclination of the base plate. Glenoid type E3 of the Favard classification with superior wear is particularly susceptible to base plate superior tilt.

Long-Term Results of Primary Reverse Shoulder Arthroplasty for Massive, Irreparable Rotator Cuff Tears Without Glenohumeral Arthritis with a Mean Follow up of 9.4 Years

Background

The aim of this single-center study was to analyze the long-term clinical results of reverse shoulder arthroplasty in patients with massive, irreparable rotator cuff tears without glenohumeral arthritis.

Methods

A retrospective cohort study of 105 patients (115 shoulders) was conducted. The mean age of the patient group was 76 years (range, 65 to 87 years). The mean clinical follow-up was 9.4 years (range, 5 to 17 years). Pain, range of motion, and complication rates were analyzed pre-operatively and at the last follow-up.

Results

The mean Constant-Murley score increased from 29 points (range, 21 to 34 points) preoperatively to 68.1 points (range, 57 to 81 points) postoperatively (p<0.05). Scapular notching was present in 50 shoulders (43.5%) and it was grade 1 or 2 in 47 of 115 cases (40.9%) and grade 3 or 4 in 3 of 115 cases (2.6%). Complications occurred in 19 patients (17%). Seven patients (6%) underwent revision surgery. The mean satisfaction rate was 94%.

Conclusions

Reverse shoulder arthroplasty is a viable treatment for massive, irreparable rotator cuff tears without glenohumeral arthritis with satisfactory clinical outcomes and low complication and reoperation rates with a mean follow up of 9.4 years after surgery.

The Reverse Shoulder Arthroplasty Angle in MRI: Impact of the Articular Cartilage in the Estimated Inclination of the Inferior Glenoid

Purpose

To describe the reverse shoulder arthroplasty angle (RSA angle) in magnetic resonance imaging (MRI) and compare the angle formed using bony landmarks (Bony RSA angle or B-RSA angle) with another angle formed using the cartilage margin as reference (Cartilage RSA angle or C-RSA angle).

Methods

Adult patients with a shoulder MRI obtained in our hospital between July 2020 and July 2021 were included. The C-RSA angle and B-RSA angle were measured. All images were independently assessed by 4 evaluators. Intraclass correlation coefficient (ICC) was determined for the B-RSA and C-RSA to evaluate interobserver agreement.

Results

A total of 61 patients were included with a median age of 59 years (17-77). C-RSA angle was significantly higher than B-RSA (25.4° ± 0.7 vs 19.5° ± 0.7, respectively) with a P-value <.001. The overall agreement was considered “good” for C-RSA (ICC = 0.74 [95% CI 0.61-0.83]) and “excellent” for B-RSA angle (ICC = 0.76 [95% CI 0.65-0.85]).

Conclusions

C-RSA angle is significantly higher than B-RSA angle. In cases without significant glenoid wear neglecting to account for the remaining articular cartilage at the inferior glenoid margin may result in superior inclination of standard surgical guides.

Reverse total shoulder glenoid component inclination affects glenohumeral kinetics during abduction: a cadaveric study

BACKGROUND

Optimal implant placement in reverse total shoulder arthroplasty (rTSA) remains controversial. Specifically, the optimal glenoid inclination is unknown. Therefore, a cadaveric shoulder simulator with 3-dimentional human motion specific to rTSA was used to study joint contact and muscle forces as a function of glenoid component inclination.

METHODS

Eight human cadaver shoulders were tested before and after rTSA implantation. Scapular plane abduction kinematics from control subjects and those with rTSA drove a cadaveric shoulder simulator with 3-dimentional scapulothoracic and glenohumeral motion. Glenoid inclination varied from -20° to +20°. Outputs included compression, superior-inferior (S/I) shear, and anterior-posterior shear forces from a 6° of freedom load cell in the joint, and deltoid and rotator cuff muscle forces. Data were evaluated with statistical parametric mapping and t-tests.

RESULTS

Inferior glenoid inclination (-) reduced S/I shear by up to 125% relative to superior inclination, with similar compression to the neutral condition (0°). Superior inclinations (+) increased the S/I shear force by approximately the same magnitude, yet decreased compression by 25% in the most superior inclination (+20°). There were few differences in deltoid or rotator cuff forces due to inclination. Only the middle deltoid decreased by approximately 7% for the most inferior inclination (-20°). Compared with native shoulders, the neutral (0°) rTSA inclination showed reduced forces of 30%-75% in the anterior deltoid and a trend toward decreased forces in the middle deltoid. Force demands on the rotator cuff varied as a function of elevation, with a trend toward increased forces in rTSA at peak glenohumeral elevation.

CONCLUSIONS

Inferior inclination reduces superior shear forces, without influencing compression. Superior inclination increased S/I shear, while decreasing compression, which may be a source of component loosening and joint instability after rTSA. Inferior inclination of the rTSA glenoid may reduce the likelihood of glenoid loosening by reducing the magnitude of cyclic shear and compressive loading during arm elevation activities, although this may be altered by specific-subject body habitus and motion. These factors are especially important in revision rTSA or glenoid bone grafting where there is already a 3-fold increase in glenoid baseplate loosening vs. primary rTSA.

Short-term comparative outcomes between reverse shoulder arthroplasty for shoulder trauma and shoulder arthritis: a Southeast Asian experience

Background

Reverse shoulder arthroplasty (RSA), first introduced as a management option for cuff tear arthropathy, is now an accepted treatment for complex proximal humeral fractures. Few studies have identified whether the outcomes of RSA for shoulder trauma are comparable to those of RSA for shoulder arthritis.

Methods

This is a retrospective, single-institution cohort study of all patients who underwent RSA at our institution between January 2013 and December 2019. In total, 49 patients met the inclusion criteria. As outcomes, we evaluated the 1-year American Shoulder and Elbow Surgeons (ASES) and Constant shoulder scores, postoperative shoulder range of motion, intra- and postoperative complications, and cumulative revision rate. The patients were grouped based on preoperative diagnosis to compare postoperative outcomes across two broad groups.

Results

The median follow-up period was 32.8 months (interquartile range, 12.6–66.6 months). The 1-year visual analog scale, range of motion, and Constant and ASES functional scores were comparable between RSAs performed to treat shoulder trauma and that performed for arthritis. The overall complication rate was 20.4%, with patients with a preoperative diagnosis of arthritis having significantly more complications than those with a preoperative diagnosis of trauma (34.8% vs. 7.7%).

Conclusions

Patients who underwent RSA due to a proximal humeral fracture or dislocation did not fare worse than those who underwent RSA for arthritis at 1 year, in terms of both functional and radiological outcomes.