Development of spray-dried amorphous solid dispersions of tadalafil using glycyrrhizin for enhanced dissolution and aphrodisiac activity in male rats

Amphiphilic disodium glycyrrhizin as a co-former for ketoconazole co-amorphous systems: Biopharmaceutical properties and underlying molecular mechanisms

Co-amorphous systems (CAMs) have been extensively investigated to improve the dissolution of hydrophobic drugs. However, drug precipitation during the storage or dissolution of CAMs has still been a major challenge. Here, disodium glycyrrhizin (Na2GA) was first used as a co-former in CAMs based on its multiple hydroxyl groups and amphiphilic structure. Ketoconazole (KTZ), a BCS class II drug, was selected as a model drug. KTZ-Na2GA CAMs at mass ratios of 1:1, 1:2.5, 1:5 and 1:10 were prepared by the spray drying method and further characterised by PXRD and DSC. The 1:2.5, 1:5 and 1:10 groups exhibited significantly enhanced Cmax (all approximately 26.67-fold) and stable maintenance of supersaturation compared to the crystalline KTZ and the corresponding physical mixtures in non-sink dissolution tests, while the 1:1 group exhibited an unstable medium Cmax (all approximately 14.67-fold). The permeability tests revealed that the permeation rate of KTZ in KTZ-Na2GA CAMs under the concentration of Na2GA in solution above the critical micelle concentration (CMC) showed a significant downwards trend compared to that below CMC. The underlying molecular mechanisms were involved in molecular miscibility, hydrogen bond interactions, solubilisation and crystallisation inhibition by Na2GA. Pharmacokinetic studies demonstrated that the AUC0-∞ of KTZ in 1:1, 1:2.5, 1:5 and 1:10 groups were significantly higher than those of the crystalline KTZ group with 2.13-, 2.30-, 2.16- and 1.86-fold, respectively (p < 0.01). In conclusion, Na2GA has proven to be a promising co-former in CAMs to enhance hydrophobic drug dissolution and bioavailability. Its effect on intestinal permeation rate of drugs also deserves attention.

A novel Posaconazole oral formulation using spray dried solid dispersion technology: in-vitro and in-vivo study

SD (solid dispersion) technology is one of the well-recognized solubility enhancement methods; but the use of versatile carriers in ASD (amorphous SD) to achieve the added advantage of modified release along with solubility improvement is an emerging area of exploration. Spray drying is a widely used technology with excellent scalability and product attributes. The SD carriers explored were Soluplus®, possessing excellent solubilization properties that may enhance bioavailability and is suitable for innovative processing, and Gelucire 43/01, a lipid polymer utilized in a non-effervescent-based floating gastro-retentive DDS for the modified release of API. The CPPs of spray drying were screened during preliminary trials, and the formulation variables were optimized using a 32 Full Factorial Design. All nine batches were evaluated for % yield, % drug content, flow properties, floating behavior, saturation solubility, and in-vitro drug release in 0.1 N HCl. The optimized batch characterized based on DSC (differential scanning calorimetry) and PXRD (powder X-ray diffraction) confirmed the amorphous nature of entrapped drug in SDD (spray-dried dispersion). Particle size analysis and SEM (scanning electron microscopy) demonstrated micron size irregular shaped particles. Residual solvent analysis by GCMS-HS confirmed the elimination of organic solvents from SDD. The optimized batch was found stable after 6 months stability study as per ICH guidelines. In-vivo roentgenography study in New Zealand white rabbit showed the residence of SDD in gastric environment for sufficient time. The pharmacokinetic study was performed in male Sprague-Dawley rats to determine the bioavailability of developed SDD based product in fasting and fed conditions, and to compare the data with marketed Noxafil formulation. The current research is focused on the development of a novel ternary SDD (spray-dried dispersion)-based gastro-retentive formulation for an anti-fungal drug Posaconazole.

Development and evaluation of sildenafil/glycyrrhizin-loaded nanofibers as a potential novel buccal delivery system for erectile dysfunction

Erectile dysfunction (ED) is a growing health condition that needs safe and effective therapy. One of the main common treatments is sildenafil which is used in clinics for managing erectile dysfunction by enhancing the blood supply to the penis. In the current study, sildenafil was formulated as nanofibers and mixed with the root extract of Glycyrrhiza glabra (glycyrrhizin) as a natural sweetener to be administrated in the buccal cavity for enhanced drug bioavailability, rapid drug absorption and improved patient compliance. The formulated dual-loaded nanofibers were evaluated by measuring diameter, disintegration, drug loading efficiency, drug release profile, and in vitro cell viability assessment. The results showed that the sildenafil/glycyrrhizin-loaded fibers had a diameter of 0.719 ± 0.177 μm and lacked any beads and pores formation on their surfaces. The drug loading and encapsulation efficiency for sildenafil were measured as 52 ± 7 µg/mg and 67 ± 9 %, respectively, while they were 290 ± 32 μg/mg and 94 ± 10 %, respectively, for glycyrrhizin. The release rate of sildenafil and glycyrrhizin demonstrated a burst release in the first minute, followed by a gradual increment until a complete release after 120 min. The in vitro cell viability evaluation exhibited that the application of sildenafil and glycyrrhizin is safe upon 24-hour treatment on human skin fibroblast cells at all used concentrations (i.e., ≤ 1,000 and 4,000 μg/mL, respectively). However, the application of sildenafil-glycyrrhizin combination (in a ratio of 1:4) demonstrated more than 80 % cell viability at concentrations of ≤ 250 and 1000 μg/mL, respectively, following 24-hour cell exposure. Therefore, sildenafil/glycyrrhizin dual-loaded PVP nanofibers showed a potential buccal therapeutic approach for erectile dysfunction management.

Investigating in-vitro functionality and in-vivo taste assessment of eco-friendly Tadalafil Pastilles

Tadalafil (TDL) has poor bioavailability due to the less aqueous solubility and bitter taste. Oral solid dosage forms, especially tablets, have a broad market worldwide. Constraints of tablets are a long process, pollution, high processing cost, and requiring more excipient. The research was performed to optimize an eco-friendly immediate-acting pastille of TDL to put forward an alternate formulation to a tablet using advanced data mining tools. Another objective is to assess the taste masking of TDL using the Brief Access Taste Aversion (BATA) model. The amount of PEG-4000, Polyox N-10, and Kyron T-314 were chosen as critical material attributes from failure mode effect analysis. Box-Behnken design (BBD) was utilized to optimize the pastilles and ascertained the significant impact of chosen variables on disintegration time and % CDR at 10 min. The control strategy and optimal region were located using an overlay plot. The pastilles were able to release the drug within 15 min due to faster disintegration. The formulated pastilles were of uniform size, shape, and mechanical strength. The bitter taste of TDL was masked and confirmed by the BATA model. The newer formulation may be helpful in the industry due to its eco-friendly, single-step, and economical process. It unlocks a new direction in the field of oral solid dosage form as an alternative to tablets.

A multi-modal approach to investigate Desmodium gangeticum's influence on stress-induced male infertility: In vivo, in vitro, and in silico assessments

Physical and psychological stress has an inverse relation with male libido and sperm quality. The present study investigates the potential fertility-enhancing properties of Desmodium gangeticum (DG) root extracts in male Wister rats subjected to immobilization-induced stress (SIMB). DG roots were extracted using n-hexane (HEDG), chloroform (CEDG), and water (AEDG). In the pilot study, aphrodisiac protentional was investigated at two doses (125 and 250 mg kg-1) of each extract. In the main study, the HEDG and AEDG at 125 and 250 mg kg-1 were challenged for the stress by immobilization (SIMB), for 6 h daily over 28 days. Parameters assessed included aphrodisiac effects, gonadosomatic index (GSI), semen quality, sperm quantity, fructose content, serum hormonal levels, testicular oxidative stress, and testicular histopathology. Additional in silico studies, including the lipid solubility index, molecular docking, molecular dynamics, and SymMap studies were conducted for validation. HEDG demonstrated significant aphrodisiac activity, improved - GSI, sperm quality and quantity, and fructose content, serum testosterone levels, histological changes induced by SIMB in the testes. Swiss ADME studies indicated Gangetin (a pterocarpan) had a high brain permeation index (4.81), a superior docking score (-8.22), and higher glide energy (-42.60), compared with tadalafil (-7.17). The 'Lig fit Prot' plot in molecular dynamics simulations revealed a strong alignment between Gangetin and phosphodiesterase type 5 (PDE5). HEDG exerts aphrodisiac effects by increasing blood testosterone levels and affecting PDE5 activity. The protective effects on spermatozoa-related parameters and testicular histological changes are attributed to the antioxidant and anti-inflammatory properties, of pterocarpan (gangetin).

Inhalable spray-dried polycaprolactone-based microparticles of Sorafenib Tosylate with promising efficacy on A549 cells

The study developed and evaluated Sorafenib Tosylate (SRT)-loaded polymeric microparticles (MPs) using biodegradable polymer polycaprolactone (PCL) as a potential inhalable carrier for NSCLC. MPs were prepared by spray-drying an oil-in-water (o/w) emulsion. The optimized MPs demonstrated excellent flowability, particle size of 2.84 ± 0.5 μm, zeta potential of -14.0 ± 1.5 mV, and 85.08 ± 5.43% entrapment efficiency. ATR-FTIR/DSC studies revealed a lack of characteristic peaks of the crystalline drug signifying good entrapment of the drug. MPs were spherical and uniform in SEM pictures. The MPs showed a biphasic release pattern up to 72h. The Anderson cascade impactor (ACI) investigation demonstrated the highest drug deposition at stage 4, which revealed that the MPs can reach the lungs' secondary and terminal bronchi. Inhalable MPs had an efficient aerodynamic property with a mass median aerodynamic diameter (MMAD) of 2.63 ± 1.3 μm, a geometric standard deviation (GSD) of 1.93 ± 0.2 μm, and a fine particle fraction (FPF) of 87 ± 2.5%. Finally, in cytotoxicity studies on A549 cancer cells, MPs had an IC50 value of 0.6011 ± 0.8 μM, which was 85.68% lower than free drug. These findings suggest SRT-loaded inhalable PCL-based MPs as a novel NSCLC treatment.

Development of Delayed Release Oral Formulation Comprising Esomeprazole Spray Dried Dispersion Utilizing Design of Experiment As An Optimization Strategy

Solid dispersion (SD) technology is one of the most widely preferred solubility enhancement methods, especially for Biopharmaceutics classification system class II and IV drugs. Since the last decade, its application for the dual purpose of solubility hike and modified release using novel carriers has been in demand for its added advantages. Spray drying is a commercially accepted technique with high aspects of scalability and product characteristics. The current study used spray-dried dispersion to design delayed release capsule for the proton pump inhibitor esomeprazole. The SD carrier hydroxypropyl methylcellulose acetate succinate-medium grade (HPMCAS-MF) enhanced solubility, inhibited precipitation of saturated drug solutions, and allowed enteric release owing to its solubility above pH 6. The proposed approach avoided compression, coating with enteric polymers, and the development of multi-particulate pellet-based formulations, improving manufacturing feasibility. The formulation was optimized using Box-Behnken design, considering significant formulation variables like HPMCAS-MF proportion and critical process parameters like feed flow rate and inlet temperature. The optimized spray-dried dispersion were characterized based on Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD), and scanning electron microscopy (SEM) and also evaluated for solubility, in vitro drug release, residual solvent content, and stability testing. Response surface methodology optimization anticipated that formulation variables affected solubility and release profile, whereas CPPs affected yield. The design space was developed via overlay plot based on constraints specified to attain the desired response and validated using three checkpoint batches with desirability 1. FTIR showed active pharmaceutical ingredient-polymer compatibility. Particle size and SEM studies showed spherical particles with an average Z-value of 1.8 µ. DSC and PXRD confirmed SD's amorphous nature. The drug release investigation and release kinetics prediction utilizing DD-solver software showed a 2-h lag time with > 90% cumulative drug release up to 4 h for the DR formulation. ESM SDD were prepared by spray drying technique using the novel solid dispersion carrier HPMCAS-MF to serve the dual purpose of solubility enhancement and delayed release. The ratio of API:carrier and process variables like feed flow rate and inlet temperature were varied using the Box-Behnken Design to determine the design space of optimized product to procure the desired characteristics of solubility improvement compared to crystalline API and delayed release of PPI to avoid the degradation in the gastric environment. The developed formulation represents several benefits over the already existing marketed products.

Boosting Tadalafil Bioavailability via Sono-Assisted Nano-Emulsion-Based Oral Jellies: Box-Behnken Optimization and Assessment

Tadalafil (TAD) is a poorly soluble, phosphodiesterase inhibitor used to treat erectile dysfunction. The primary goal of this project was to prepare nano-emulsions using ultrasonic technology to address TAD bioavailability concerns. The Box−Behnken design was employed to find prominent correlations between factors impacting the sono-emulsification process. The emulsifier concentration, amplitude level, and ultrasonication time were the independent factors, whereas the average droplet size (ADS) and polydispersity index (PDI) were designated as the response variables. TAD-loaded nano-emulsions (93−289 nm) were generated and the emulsifier concentration showed a crucial role in directing emulsion droplet size. The model desirability function was utilized to optimize a nano-emulsion with a small ADS (99.67 ± 7.55 nm) and PDI (0.45 ± 0.04) by adjusting the emulsifiers concentration, amplitude level, and ultrasonication time at 9.85%, 33%, 49 s, respectively. The optimized nano-emulsions did not demonstrate any precipitation or phase separation after stability stress tests. TAD jellies were formulated based on the optimized nano-emulsion and subjected to in vitro evaluation for physical characteristics; TAD content, pH, spreadability, viscosity, syneresis, and taste-masking ability. An optimized nano-emulsion-based jelly (NEJ) formulation showed more than 96% drug dissolution in 30 min relative to 14% for the unprocessed TAD. In vivo assessment of NEJ in experimental rats demonstrated a significant enhancement (p < 0.05) of TAD bioavailability with an AUC0−24h of 2045 ± 70.2 vs. 259.9 ± 17.7 ng·h·mL−1 for the unprocessed TAD. Storage stability results revealed that NEJ remained stable with unremarkable changes in properties for 3 months. Overall, NEJ can be regarded as a successful therapeutic option for TAD administration with immediate-release properties and improved bioavailability.

Tadalafil-Loaded Self-Nanoemulsifying Chewable Tablets for Improved Bioavailability: Design, In Vitro, and In Vivo Testing

This research aimed to develop innovative self-nanoemulsifying chewable tablets (SNECT) to increase oral bioavailability of tadalafil (TDL), a nearly insoluble phosphodiesterase-5 inhibitor. Cinnamon essential oil, PEG 40 hydrogenated castor oil (Cremophor® RH 40), and polyethylene glycol 400 served as the oil, surfactant, and cosurfactant in the nanoemulsifying system, respectively. Primary liquid self-nanoemulsifying delivery systems (L-SNEDDS) were designed using phase diagrams and tested for dispersibility, droplet size, self-emulsifying capability, and thermodynamic stability. Adsorption on a carrier mix of silicon dioxide and microcrystalline cellulose was exploited to solidify the optimum L-SNEDDS formulation as self-nanoemulsifying granules (SNEG). Lack of crystalline TDL within the granules was verified by DSC and XRPD. SNEG were able to create a nanoemulsion instantaneously (165 nm), a little larger than the original nanoemulsion (159 nm). SNECT were fabricated by compressing SNEG with appropriate excipients. The obtained SNECT retained their quick dispersibility dissolving 84% of TDL within 30 min compared to only 18% dissolution from tablets of unprocessed TDL. A pharmacokinetic study in Sprague−Dawley rats showed a significant increase in Cmax (2.3-fold) and AUC0−24 h (5.33-fold) of SNECT relative to the unprocessed TDL-tablet (p < 0.05). The stability of TDL-SNECT was checked against dilutions with simulated GI fluids. In addition, accelerated stability tests were performed for three months at 40 ± 2 °C and 75% relative humidity. Results revealed the absence of obvious changes in size, PDI, or other tablet parameters before and after testing. In conclusion, current findings illustrated effectiveness of SNECT to enhance TDL dissolution and bioavailability in addition to facilitating dose administration.

Application of hydrophilic polymers for the preparation of tadalafil solid dispersions: micromeritics properties, release and erectile dysfunction studies in male rats

The objective of the present study was to improve the dissolution rate and aphrodisiac activity of tadalafil by using hydrophilic polymers. Solid dispersions were prepared by solvent evaporation-Rota evaporator using Koliphore 188, Kollidon^® VA64, and Kollidon^® 30 polymers in a 1:1 ratio. Prepared tadalafil-solid dispersions (SDs) evaluated for yield, drug content, micromeritics properties, physicochemical characterizations, and aphrodisiac activity assessment. The optimized SDs TK188 showed size (2.175 ± 0.24 µm), percentage of content (98.89 ± 1.23%), yield (87.27 ± 3.13%), bulk density (0.496 ± 0.005 g/cm3), true density (0.646 ± 0.003 g/cm3), Carr's index (23.25 ± 0.81), Hausner ratio (1.303 ± 0.003) and angle of repose (<25°). FTIR spectrums revealed tadalafil doesn't chemically interact with used polymers. XRD and DSC analysis represents TK188 SDs were in the amorphous state. Drug release was 97.17 ± 2.43% for TK188, whereas it was 32.76 ± 2.65% for pure drug at the end of 2 h with 2.96-fold increase in dissolution and followed release kinetics of Korsmeyer Peppa's model. MDT and DE were noted to be 17.48 minutes and 84.53%, respectively. Furthermore, TK188 SDs showed relative improvement in the sexual behavior of the male rats. Thus the developed SDs TK188 could be potential tadalafil carriers for the treatment of erectile dysfunction.

Ribociclib-Loaded Ethylcellulose-Based Nanosponges: Formulation, Physicochemical Characterization, and Cytotoxic Potential against Breast Cancer

In the present study, ribociclib-loaded nanosponges (RCNs) composed of ethylcellulose and polyvinyl alcohol were developed using an emulsion-solvent evaporation method. Preliminary evaluations of the developed RCNs (RCN1 to RCN7) were performed in terms of size, polydispersity index (PDI), zeta potential (ZP), entrapment efficiency (EE), and drug loading (DL), which allowed us to select the optimized formulation. RCN3 was selected as the optimized carrier system with particle size ( $363.5\pm 4.8\text{nm}$ ), PDI ( $0.292\pm 0.012$ ), zeta potential ( $-18.5\pm 0.05\text{mV}$ ), EE ( $81.35\pm 1.64\%$ ), and DL ( $21.96\pm 0.28\%$ ). Further, the optimized nanosponges (RCN3) were subjected to FTIR, XRD, DSC, and SEM studies, and results confirmed the proper encapsulation of the drug within the porous polymeric matrix. In vitro drug release studies showed that the drug release was significantly enhanced with a maximum drug release through RCN3 formulation ( $81.85\pm 0.37\%$ ) and followed the Higuchi model. Moreover, the RCN3 system showed greater cytotoxicity than free ribociclib (RC) against MDA-MB-231 and MCF-7 breast cancer cell lines. The percentage of apoptosis induced by RCN3 was found significantly higher than that of free RC ( $p<0.05$ ). Overall, ribociclib-loaded ethylcellulose nanosponges could be a potential nanocarrier to enhance the effectiveness of ribociclib in breast cancer treatment.

Enhanced Dissolution of Sildenafil Citrate Using Solid Dispersion with Hydrophilic Polymers: Physicochemical Characterization and In Vivo Sexual Behavior Studies in Male Rats

Sildenafil citrate (SLC) is a frequently used medication (Viagra®) for the treatment of erectile dysfunction (ED). Due to its poor solubility, SLC suffers from a delayed onset of action and poor bioavailability. Hence, the aim of the proposed work was to prepare and evaluate solid dispersions (SDs) with hydrophilic polymers (Kolliphor® P188, Kollidon® 30, and Kollidon®-VA64), in order to enhance the dissolution and efficacy of SLC. The SLC-SDs were prepared using a solvent evaporation method (at the ratio drug/polymer, 1:1, w/w) and characterized by Differential Scanning Calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Scanning electron microscope (SEM), drug content, yield, and in vitro release studies. Based on this evaluation, SDs (SLC-KVA64) were optimized, with a maximum release of drug (99.74%) after 2 h for all the developed formulas. The SDs (SLC-KVA64) were further tested for sexual behavior activity in male rats, and significant enhancements in copulatory efficiency (81.6%) and inter-copulatory efficiency (44.9%) were noted in comparison to the pure SLC drug, when exposed to the optimized SLC-KVA64 formulae. Therefore, SD using Kollidon®-VA64 could be regarded as a potential strategy for improving the solubility, in vitro dissolution, and therapeutic efficacy of SLC.

Recent studies on the processes and formulation impacts in the development of solid dispersions by hot-melt extrusion

Industrial-scale pharmaceutical applications still face many challenges in overcoming the low absorption and bioavailability of poorly water-soluble drugs. Hot-melt extrusion has emerged as a promising approach with continuous processing on an industrial scale for the preparation of drug delivery systems. Many reviews have mentioned the potential applications, processes, principles and advantages and disadvantages of hot-melt extrusion in the pharmaceutical industry. However, a focus on the recent progress of hot-melt extrusion, which investigates the impacts of processes and formulations of solid dispersions of poorly water-soluble drugs, is missing. In this review, various factors, including polymers, drug properties, additives and surfactants, in solid dispersion SD formulations by hot-melt extrusion will be discussed. Moreover, the effects of the hot-melt extrusion process on the physicochemical properties of solid dispersions will be mentioned. The utilization of molecular interactions in hot-melt extrusion to improve drug stability will also be described. Overall, this summary of recent studies on solid dispersion by hot-melt extrusion will provide perspectives and effectiveness for the development of formulations containing poorly water-soluble drugs.