Biomechanical evaluation of a novel total cervical prosthesis in a single-level cervical subtotal corpectomy model: an in vitro human cadaveric study

Does the novel artificial cervical joint complex resolve the conflict between stability and mobility after anterior cervical surgery? a finite element study

Background and objective

Our group has developed a novel artificial cervical joint complex (ACJC) as a motion preservation instrument for cervical corpectomy procedures. Through finite element analysis (FEA), this study aims to assess this prosthesis's mobility and stability in the context of physiological reconstruction of the cervical spine.

Materials and methods

A finite element (FE)model of the subaxial cervical spine (C3-C7) was established and validated. ACJC arthroplasty, anterior cervical corpectomy and fusion (ACCF), and two-level cervical disc arthroplasty (CDA) were performed at C4-C6. Range of motion (ROM), intervertebral disc pressure (IDP), facet joint stress (FJS), and maximum von Mises stress on the prosthesis and vertebrae during loading were compared.

Results

Compared to the intact model, the ROM in all three surgical groups demonstrated a decline, with the ACCF group exhibiting the most significant mobility loss, and the highest compensatory motion in adjacent segments. ACJC and artificial cervical disc prosthesis (ACDP) well-preserved cervical mobility. In the ACCF model, IDP and FJS in adjacent segments increased notably, whereas the index segments experienced the most significant FJS elevation in the CDA model. The ROM, IDP, and FJS in both index and adjacent segments of the ACJC model were intermediate between the other two. Stress distribution of ACCF instruments and ACJC prosthesis during the loading process was more dispersed, resulting in less impact on the adjacent vertebrae than in the CDA model.

Conclusion

The biomechanical properties of the novel ACJC were comparable to the ACCF in constructing postoperative stability and equally preserved physiological mobility of the cervical spine as CDA without much impact on adjacent segments and facet joints. Thus, the novel ACJC effectively balanced postoperative stability with cervical motion preservation.

In-vitro Biomechanics of the Cervical Spine: a Systematic Review

In-vitro testing has been conducted to provide a comprehensive understanding of the biomechanics of the cervical spine. This has allowed a characterization of the stability of the spine as influenced by the intrinsic properties of its tissue constituents and the severity of degeneration or injury. This also enables the pre-clinical estimation of spinal implant functionality and the success of operative procedures. The purpose of this review paper was to compile methodologies and results from various studies addressing spinal kinematics in pre- and post-operative conditions so that they could be compared. The reviewed literature was evaluated to provide suggestions for a better approach for future studies, to reduce the uncertainties and facilitate comparisons among various results. The overview is presented in a way to inform various disciplines, such as experimental testing, design development, and clinical treatment. The biomechanical characteristics of the cervical spine, mainly the segmental range of motion (ROM), intradiscal pressure (IDP), and facet joint load (FJL), have been assessed by testing functional spinal units (FSUs). The relative effects of pathologies including disc degeneration, muscle dysfunction, and ligamentous transection have been studied by imposing on the specimen complex load scenarios imitating physiological conditions. The biomechanical response is strongly influenced by specimen type, test condition, and the different types of implants utilized in the different experimental groups.

Artificial disc and vertebra system: a novel motion preservation device for cervical spinal disease after vertebral corpectomy

OBJECTIVE

To determine the range of motion and stability of the human cadaveric cervical spine after the implantation of a novel artificial disc and vertebra system by comparing an intact group and a fusion group.

METHODS

Biomechanical tests were conducted on 18 human cadaveric cervical specimens. The range of motion and the stability index range of motion were measured to study the function and stability of the artificial disc and vertebra system of the intact group compared with the fusion group.

RESULTS

In all cases, the artificial disc and vertebra system maintained intervertebral motion and reestablished vertebral height at the operative level. After its implantation, there was no significant difference in the range of motion (ROM) of C(3-7) in all directions in the non-fusion group compared with the intact group (p>0.05), but significant differences were detected in flexion, extension and axial rotation compared with the fusion group (p<0.05). The ROM of adjacent segments (C(3-4), C(6-7)) of the non-fusion group decreased significantly in some directions compared with the fusion group (p<0.05). Significant differences in the C(4-6) ROM in some directions were detected between the non-fusion group and the intact group. In the fusion group, the C(4-6) ROM in all directions decreased significantly compared with the intact and non-fusion groups (p<0.01). The stability index ROM (SI-ROM) of some directions was negative in the non-fusion group, and a significant difference in SI-ROM was only found in the C(4-6) segment of the non-fusion group compared with the fusion group.

CONCLUSION

An artificial disc and vertebra system could restore vertebral height and preserve the dynamic function of the surgical area and could theoretically reduce the risk of adjacent segment degeneration compared with the anterior fusion procedure. However, our results should be considered with caution because of the low power of the study. The use of a larger sample should be considered in future studies.

A novel total cervical prosthesis for single-level cervical subtotal corpectomy: radiologic and histomorphometric analysis in a caprine model

STUDY DESIGN

A novel total cervical prosthesis (TCP) for single-level cervical subtotal corpectomy was assessed in a caprine animal model.

OBJECTIVES

To investigate the radiologic and histomorphometric characteristics of a novel TCP for single-level cervical subtotal corpectomy.

SUMMARY OF BACKGROUND

Cervical disk replacement has emerged as a promising alternative to arthrodesis in the management of cervical disk herniation. However, they are designed for anterior cervical discectomy, and not suitable for cervical subtotal corpectomy. To solve this problem, our group has developed a novel TCP for single-level cervical subtotal corpectomy.

MATERIALS AND METHODS

There were 12 adult Shannxi goats (2 y old) used in this study. The goats were divided into 2 groups based on postoperative survival periods of 3 (n=6) and 6 (n=6) months after surgery. Using an anterior surgical approach, a standard anterior C3 vertebra subtotal corpectomy and decompression of the spinal canal were performed, followed by implantation of the TCP device. Then all the goats were killed and underwent radiographic and histologic observations.

RESULTS

The TCP implant procedures were successfully completed in all 12 goats without incidence of vascular or infectious complications. The range of motion of C2-C3 and C3-C4 segments were preserved in both of the groups. Three-dimensional images of specimens interface indicated confluent interdigitization of trabeculae at the prosthetic endplate-bone interface, without evidence of significant radiolucent lines or gaps. Histomorphometric analysis showed that there were a large number of fibrous tissue and a small amount of cartilage cells between the prostheses and bone in the 3 months' group. In the 6 months' group, part of fibrous tissue has changed into the cartilage tissue.

CONCLUSIONS

Our data show that this prosthesis can maintain the stability of the cervical spine and retain the activity of the cervical spine in vivo. The findings in this study provide a foundation for ongoing clinical investigations using the TCP.