Copper(II) imidazolate frameworks as highly efficient photocatalysts for reduction of CO2 into methanol under visible light irradiation

Kilogram-scale fabrication of TiO2 nanoparticles modified with carbon dots with enhanced visible-light photocatalytic activity

Incorrect discharge of dye wastewater will cause environment pollution and be very harmful to human health. Visible-light photocatalysis over large-scale synthesized semiconductor materials can become one of the feasible solutions for the practical application of purifying dye wastewater. As a new candidate, carbon dots (CDs) with unique fluorescence were fabricated on a tens of grams scale and then further applied to the kilogram-scale synthesis of a CDs/TiO₂ composite by one-step heat treatment. Compared with single TiO₂ nanoparticles (NPs), the CDs/TiO₂ composite with a large specific surface area exhibits enhanced photo-degradation performance for methyl orange (MO). This phenomenon can be attributed to the loading of CDs in the TiO₂ NPs, which is conducive to broadening the light absorption spectrum and improving absorption intensity, narrowing the band gap, charge carrier trapping, up-converting properties, and charge separation. The kilogram-scale synthesis of the CDs/TiO₂ photocatalyst does not affect the morphology, structure, optical properties and photocatalytic performance of the composite, which opens up a new avenue to construct elaborate heterostructures for enhanced photocatalytic performance using visible light as the light source.

ZnO Nanoparticles Modified by Carbon Quantum Dots for the Photocatalytic Removal of Synthetic Pigment Pollutants

Synthetic pigment pollutants caused by the rapid development of the modern food industry have become a serious threat to people's health and quality of life. Environmentally friendly ZnO-based photocatalytic degradation exhibits satisfactory efficiency, but some shortcomings of large band gap and rapid charge recombination reduce the removal of synthetic pigment pollutants. Here, carbon quantum dots (CQDs) with unique up-conversion luminescence were applied to decorate ZnO nanoparticles to effectively construct the CQDs/ZnO composites via a facile and efficient route. The ZnO nanoparticles with a spherical-like shape obtained from a zinc-based metal organic framework (zeolitic imidazolate framework-8, ZIF-8) were coated by uniformly dispersive quantum dots. Compared with single ZnO particles, the obtained CQDs/ZnO composites exhibit enhanced light absorption capacity, decreased photoluminescence (PL) intensity, and improved visible-light degradation for rhodamine B (RhB) with the large apparent rate constant (k _app). The largest k _app value in the CQDs/ZnO composite obtained from 75 mg of ZnO nanoparticles and 12.5 mL of the CQDs solution (∼1 mg·mL^-1) was 2.6 times that in ZnO nanoparticles. This phenomenon may be attributed to the introduction of CQDs, leading to the narrowed band gap, an extended lifetime, and the charge separation. This work provides an economical and clean strategy to design visible-light-responsive ZnO-based photocatalysts, which is expected to be used for the removal of synthetic pigment pollutants in food industry.

NiO/g-C3N4 composite for enhanced photocatalytic properties in the wastewater treatment

The massive discharge of colored wastewater has seriously harmed the environment and people's health. Photocatalysis technology is an effective method to purify colored wastewater and has been widely concerned in colored wastewater treatment. In this study, based on the obtained nickel oxide (NiO) nanospheres by solvothermal method and graphite phase carbon nitride (g-C₃N₄) nanosheets by thermal polymerization method, the p-n heterojunction composed of NiO nanospheres and g-C₃N₄ nanosheets was successfully constructed by heat treatment for the photocatalytic degradation of methyl orange (MO). The morphology, crystallinity, surface features, and optical properties of the NiO/g-C₃N₄ composites were investigated by various characterization methods such as scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray diffractometer (XRD), Fourier transform infrared spectrometer (FT-IR), X-ray photoelectron spectroscopy (XPS), UV-vis spectrophotometer, and fluorescence spectrometer (PL), which provided the evidence for the formation of the heterojunction between NiO and g-C₃N₄. Compared with the g-C₃N₄ nanosheets and NiO nanospheres, the NiO/g-C₃N₄ composites showed the improved photocatalytic activity for the degradation of MO under visible light irradiation. And the NiO/g-C₃N₄ composite with the mole ratio of NiO and g-C₃N₄ of 2:8 displayed the best photocatalytic activity of MO, and more than 90% of MO can be degraded under the illumination of 100 min. The high photocatalytic properties over the NiO/g-C₃N₄ composite may be due to high specific surface area, the perfect band matching, and the formation of the p-n heterojunction, which helps to promote interfacial charge transfer and hinder the recombination of photo-generated electrons and holes. Moreover, the NiO/g-C₃N₄ composite exhibits the universality and cyclic stability, which is expected to have broad application prospects in the treatment of colored wastewater.

Research on photocatalytic CO2 conversion to renewable synthetic fuels based on localized surface plasmon resonance: current progress and future perspectives

Due to its desirable optoelectronic properties, localized surface plasmon resonance (LSPR) can hopefully play a promising role in photocatalytic CO2 reduction reaction (CO2RR). In this review, mechanisms and applications of LSPR effect in this field are introduced in detail.

The Progress of Metal-Organic Framework for Boosting CO2 Conversion

With the rapid development of modern society, environmental problems, including excessive amounts of CO2 released in the atmosphere, are becoming more and more serious. It is necessary to develop new materials and technologies to reduce pollution. Among them, metal–organic frameworks (MOFs) have shown potential for application in the area of catalysis due to their ultra-high specific surface area, structural versatility, and designability as well as ease of modification and post-synthesis. Herein, we summarize recent research advances by use of MOFs for boosting CO2 conversion. Furthermore, challenges and possible research directions related to further exploration are also discussed.

Chemically Bonded Plasmonic Triazole-Functionalized Au/Zeolitic Imidazole Framework (ZIF-67) for Enhanced CO2 Photoreduction

The design of functionalized metallic nanoparticles is considered an emerging technique to ensure the interaction between metal and semiconductor material. In the literature, this interface interaction is mainly governed by electrostatic or van der Waals forces, limiting the injection of electrons under light irradiation. To enhance the transfer of electrons between two compounds, close contact or chemical bonding at the interface is required. Herein, a new approach was reported for the synthesis of chemically bonded plasmonic Au NPs/ZIF-67 nanocomposites. The structure of ZIF-67 was grown on the surface of functionalized plasmonic Au NPs using 1H-1,2,4-triazole-3-thiol as the capping agent, which acted as both stabilizer of Au nanoparticles and a molecular linker for ZIF-67 formation. As a result, the synthesized material exhibited outstanding photocatalytic CO₂ reduction with a methanol production rate of 2.70 mmol h^-1  g^-1 _cat under sunlight irradiation. This work emphasizes that the diligent use of capping agents, with suitable functional groups, could facilitate the formation of intimate heterostructure for enhanced photocatalytic CO₂ reduction.

Carbon dioxide photoreduction in prebiotic environments

The reduction of carbon dioxide is one of the hottest topics due to the concern of global warming. Carbon dioxide reduction is also an essential step for life's origins as photoautotrophs arose soon after Earth formation. Both the topics are of high general interest, and possibly, there could be a fruitful cross-fertilization of the two fields. Herein, we selected and collected papers related to photoreduction of carbon dioxide using compounds easily available on the Earth and considered of prebiotic relevance. This work might be useful also to scientists interested in carbon dioxide photoreduction and/or to have an overview of the techniques available.

Recent Advances of Photocatalytic Hydrogenation of CO2 to Methanol

Constantly increasing hydrocarbon fuel combustion along with high levels of carbon dioxide emissions has given rise to a global energy crisis and environmental alterations. Photocatalysis is an effective technique for addressing this energy and environmental crisis. Clean and renewable solar energy is a very favourable path for photocatalytic CO2 reduction to value-added products to tackle problems of energy and the environment. The synthesis of various products such as CH4, CH3OH, CO, EtOH, etc., has been expanded through the photocatalytic reduction of CO2. Among these products, methanol is one of the most important and highly versatile chemicals widely used in industry and in day-to-day life. This review emphasizes the recent progress of photocatalytic CO2 hydrogenation to CH3OH. In particular, Metal organic frameworks (MOFs), mixed-metal oxide, carbon, TiO2 and plasmonic-based nanomaterials are discussed for the photocatalytic reduction of CO2 to methanol. Finally, a summary and perspectives on this emerging field are provided.

A Review on Metal Ions Modified TiO2 for Photocatalytic Degradation of Organic Pollutants

TiO2 is a semiconductor material with high chemical stability and low toxicity. It is widely used in the fields of catalysis, sensing, hydrogen production, optics and optoelectronics. However, TiO2 photocatalyst is sensitive to ultraviolet (UV) light; this is why its photocatalytic activity and quantum efficiency are reduced. To enhance the photocatalytic efficiency in the visible light range as well as to increase the number of the active sites on the crystal surface or inhibit the recombination rate of photogenerated electron–hole pairs electrons, various metal ions were used to modify TiO2. This review paper comprehensively summarizes the latest progress on the modification of TiO2 photocatalyst by a variety of metal ions. Lastly, the future prospects of the modification of TiO2 as a photocatalyst are proposed.

Integrated catalytic insights into methanol production: Sustainable framework for CO2 conversion

A continuous increase in the amount of greenhouse gases (GHGs) is causing serious threats to the environment and life on the earth, and CO₂ is one of the major candidates. Reducing the excess CO₂ by converting into industrial products could be beneficial for the environment and also boost up industrial growth. In particular, the conversion of CO₂ into methanol is very beneficial as it is cheaper to produce from biomass, less inflammable, and advantageous to many industries. Application of various plants, algae, and microbial enzymes to recycle the CO₂ and using these enzymes separately along with CO₂-phillic materials and chemicals can be a sustainable solution to reduce the global carbon footprint. Materials such as MOFs, porphyrins, and nanomaterials are also used widely for CO₂ absorption and conversion into methanol. Thus, a combination of enzymes and materials which convert the CO₂ into methanol could energize the CO₂ utilization. The CO₂ to methanol conversion utilizes carbon better than the conventional syngas and the reaction yields fewer by-products. The methanol produced can further be utilized as a clean-burning fuel, in pharmaceuticals, automobiles and as a general solvent in various industries etc. This makes methanol an ideal fuel in comparison to the conventional petroleum-based ones and it is advantageous for a safer and cleaner environment. In this review article, various aspects of the circular economy with the present scenario of environmental crisis will also be considered for large-scale sustainable biorefinery of methanol production from atmospheric CO₂.

Photocatalytic Reduction of CO2 to Methanol Using a Copper-Zirconia Imidazolate Framework

A set of novel photocatalysts, i.e., copper-zirconia imidazolate (CuZrIm) frameworks, were synthesized using different zirconia molar ratios (i.e., 0.5, 1, and 1.5 mmol). The photoreduction process of CO2 to methanol in a continuous-flow stirred photoreactor at pressure and temperature of 1 atm and 25 °C, respectively, was studied. The physicochemical properties of the synthesized catalysts were studied using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and photoluminescence (PL) spectroscopy. The highest methanol activity of 818.59 µmol/L.g was recorded when the CuZrIm1 catalyst with Cu/Zr/Im/NH4OH molar ratio of 2:1:4:2 (mmol/mmol/mmol/M) was employed. The enhanced yield is attributed to the presence of Cu2+ oxidation state and the uniformly dispersed active metals. The response surface methodology (RSM) was used to optimize the reaction parameters. The predicted results agreed well with the experimental ones with the correlation coefficient (R2) of 0.99. The optimization results showed that the highest methanol activity of 1054 µmol/L.g was recorded when the optimum parameters were employed, i.e., stirring rate (540 rpm), intensity of light (275 W/m2) and photocatalyst loading (1.3 g/L). The redox potential value for the CuZrIm1 shows that the reduction potential is −1.70 V and the oxidation potential is +1.28 V for the photoreduction of CO2 to methanol. The current work has established the potential utilization of the imidazolate framework as catalyst support for the photoreduction of CO2 to methanol.

Dinuclear uranium(VI) salen coordination compound: an efficient visible-light-active catalyst for selective reduction of CO2 to methanol

A new dinuclear uranyl salen coordination compound, [(UO2)2(L)2]·2MeCN [L = 6,6'-((1E,1'E)-((2,2-dimethylpropane-1,3-diyl)bis(azaneylylidene))-bis(methaneylylidene))bis(2-methoxyphenol)], was synthesized using a multifunctional salen ligand to harvest visible light for the selective photocatalytic reduction of CO2 to MeOH. The assembling of the two U centers into one coordination moiety via a chelating-bridging doubly deprotonated tetradentate ligand allowed the formation of U centers with distorted pentagonal bipyramid geometry. Such construction of compounds leads to excellent activity for the photocatalytic reduction of CO2, permitting a production rate of 1.29 mmol g-1 h-1 of MeOH with an apparent quantum yield of 18%. Triethanolamine (TEOA) was used as a sacrificial electron donor to carry out the photocatalytic reduction of CO2. The selective methanol formation was purely a photocatalytic phenomenon and confirmed using isotopically labeled 13CO2 and product analysis by 13C-NMR spectroscopy. The spectroscopic studies also confirmed the interaction of CO2 with the molecule of the title complex. The results of these efforts made it possible to understand the reaction mechanism using ESI-mass spectrometry.

One-pot preparation of hierarchical Cu2O hollow spheres for improved visible-light photocatalytic properties

As visible light photocatalysts, narrow bandgap semiconductors can effectively convert solar energy to chemical energy, exhibiting potential applications in alleviating energy shortage and environmental pollution. Cu₂O hollow spheres with a narrow band gap and uniform hierarchical structures have been fabricated in a controlled way. The one-pot solvothermal method without any template is simple and facile. The morphologies, crystal structures, composition, specific surface areas, and optical and photoelectric properties of the products were analyzed by various techniques. The hollow and solid Cu₂O spheres could be fabricated by controlling the reaction time, and a possible growth process of the Cu₂O hollow spheres was revealed. The degradation of methyl orange (MO) was used to investigate the visible-light catalytic properties of the Cu₂O samples. More than 90% of MO is degraded under visible light illumination of 20 min, exhibiting a quick catalytic reaction. The rate constant of the Cu₂O hollow spheres was 2.54 times and 46.6 times larger than those of the Cu₂O solid spheres and commercial Cu₂O powder, respectively. The possible photocatalytic mechanism of MO was revealed over Cu₂O hollow spheres through the detection of active species. The as-prepared Cu₂O hollow spheres display improved visible-light catalytic activity and stability, indicating their potential application in wastewater treatment.

As visible light photocatalysts, narrow bandgap semiconductors can effectively convert solar energy to chemical energy, exhibiting potential applications in alleviating energy shortage and environmental pollution.

Atomically Dispersed Single Co Sites in Zeolitic Imidazole Frameworks Promoting High-Efficiency Visible-Light-Driven Hydrogen Production

As photocatalysis technology could transform renewable and clean solar energy into green hydrogen (H₂ ) energy through solar water splitting, it is regarded as the "Holy Grail" in chemistry field in the 21st century. Unfortunately, the bottleneck of this technique still lies in the exploration of highly active, cost-effective, and robust photocatalysts. This work reports the design and synthesis of a novel zeolitic imidazole framework (ZIF) coupled Zn_0.8 Cd_0.2 S hetero-structured photocatalyst for high-performance visible-light-induced H₂ production. State-of-the-art characterizations and theoretical computations disclose that the interfacial electronic interaction between ZIF and Zn_0.8 Cd_0.2 S, the high distribution of Zn_0.8 Cd_0.2 S on ZIF, and the atomically dispersed coordinately unsaturated Co sites in ZIF synergistically arouse the significantly improved visible-light photocatalytic H₂ production performance.

Photoreduction of Carbon Dioxide to Methanol over Copper Based Zeolitic Imidazolate Framework-8: A New Generation Photocatalyst

The efficient reduction of CO2 into valuable products such as methanol, over metal-organic frameworks (MOFs) based catalyst, has received much attention. The photocatalytic reduction is considered the most economical method due to the utilization of solar energy. In this study, Copper (II)/Zeolitic Imidazolate Framework-8 (Cu/ZIF-8) catalysts were synthesized via a hydrothermal method for photocatalytic reduction of CO2 to methanol. The synthesized catalysts were characterized by X-ray Photoelectron Spectroscopy (XPS), Field Emission Scanning Electron Microscopy (FESEM) coupled with Energy Dispersive X-ray (EDX), Ultraviolet-visible (UV-vis) spectroscopy, and X-Ray Diffraction (XRD). The host ZIF-8, treated with 2 mmol copper prepared in 2M ammonium hydroxide solution showed the highest photocatalytic activity. The crystal structures of ZIF-8 and 2Cu/ZIF-8N2 catalysts were observed as cubic and orthorhombic, respectively and the XPS analysis confirmed the deposition of Cu (II) ions over ZIF-8 surface among all the prepared catalysts. The orthorhombic structure, nano-sized crystals, morphology and Cu loading of the 2Cu/ZIF-8N2 catalyst were the core factors to influence the photocatalytic activity. The yield of Methanol was found to be 35.82 µmol/L·g after 6 h of irradiations on 2Cu/ZIF-8N2 catalyst in the wavelength range between 530–580 nm. The copper-based ZIF-8 catalyst has proven as an alternative approach for the economical photocatalytic reduction of CO2 to CH3OH.

Pristine Metal-Organic Frameworks and their Composites for Energy Storage and Conversion

Metal-organic frameworks (MOFs), a new class of crystalline porous organic-inorganic hybrid materials, have recently attracted increasing interest in the field of energy storage and conversion. Herein, recent progress of MOFs and MOF composites for energy storage and conversion applications, including photochemical and electrochemical fuel production (hydrogen production and CO₂ reduction), water oxidation, supercapacitors, and Li-based batteries (Li-ion, Li-S, and Li-O₂ batteries), is summarized. Typical development strategies (e.g., incorporation of active components, design of smart morphologies, and judicious selection of organic linkers and metal nodes) of MOFs and MOF composites for particular energy storage and conversion applications are highlighted. A broad overview of recent progress is provided, which will hopefully promote the future development of MOFs and MOF composites for advanced energy storage and conversion applications.

Fast photocatalytic degradation of dyes using low-power laser-fabricated Cu2O–Cu nanocomposites

Facile synthesis of Cu₂O–Cu nanocomposites by using a low-power CO₂laser was realized, and the fabricated nanomaterials showed excellent photocatalytic activity for the degradation of various dyes.

Recyclable Magnetic Titania Nanocomposite from Ilmenite with Enhanced Photocatalytic Activity

Using ilmenite as a raw material, iron was converted into Fe₃O₄ magnetic fluid, which further was combined with titanium filtrate by a solvothermal method. Finally Fe₃O₄/TiO₂ nanocomposites with the uniform size of 100-200 nm were prepared. This approach uses rich, inexpensive ilmenite as a titanium and iron source, which effectively reduces the production cost. The crystal structure, chemical properties and morphologies of the products were characterized by SEM, TEM, XRD, FTIR, BET, UV-Vis, XPS and VSM. The novel photocatalyst composed of face-centered cubic Fe₃O₄ and body-centered tetragonal anatase-TiO₂ exhibits a spherical shape with porous structures, superparamagnetic behavior and strong absorption in the visible light range. Using the degradation reaction of Rhodamine B (RhB) to evaluate the photocatalytic performance, the results suggest that Fe₃O₄/TiO₂ nanocomposites exhibit excellent photocatalytic activities and stability under visible light and solar light. Moreover, the magnetic titania nanocomposites displayed good magnetic response and were recoverable over several cycles. Based on the trapping experiments, the main active species in the photocatalytic reaction were confirmed and the possible photocatalytic mechanism of RhB with magnetic titania was proposed. The enhanced photocatalytic activity and stability, combined with excellent magnetic recoverability, make the prepared nanocomposite a potential candidate in wastewater purification.

Tris(bipyridine)Metal(II)-Templated Assemblies of 3D Alkali-Ruthenium Oxalate Coordination Frameworks: Crystal Structures, Characterization and Photocatalytic Activity in Water Reduction

A series of 3D oxalate-bridged ruthenium-based coordination polymers with the formula of {[Z^II(bpy)₃][M^IRu(C₂O₄)₃]}_n (Z^II = Zn²⁺ (1), Cu²⁺ (3, 4), Ru²⁺ (5, 6), Os²⁺ (7, 8); M^I = Li⁺, Na⁺; bpy = 2,2’-bipyridine) and {[Zn^II(bpy)₃](H₂O)[LiRu(C₂O₄)₃]}_n (2) has been synthesized at room temperature through a self-assembly reaction in aqueous media and characterized by single-crystal and powder X-ray diffraction, elemental analysis, infrared and diffuse reflectance UV–Vis spectroscopy and thermogravimetric analysis. The crystal structures of all compounds comprise chiral 3D honeycomb-like polymeric nets of the srs-type, which possess triangular anionic cages where [Z^II(bpy)₃]²⁺ cationic templates are selectively embedded. Structural analysis reveals that the electronic configuration of the cationic guests is affected by electrostatic interaction with the anionic framework. Moreover, the MLCT bands gaps values for 1–8 can be tuned in a rational way by judicious choice of [Z^II(bpy)₃]²⁺ guests. The 3D host-guest polymeric architectures can be used as self-supported heterogeneous photocatalysts for the reductive splitting of water, exhibiting photocatalytic activity for the evolution of H₂ under UV light irradiation.