Synthesis and characterization of polymorphs of photoluminescent Eu(III)-(2,5-furandicarboxylic acid, oxalic acid) MOFs

Dual-Ligand Strategy Employing Rigid 2,5-Thiophenedicarboxylate and 1,10-Phenanthroline as Coligands for Solvothermal Synthesis of Eight Lanthanide(III) Coordination Polymers: Structural Diversity, DFT Study, and Exploration of the Luminescent Tb(III) Coordination Polymer as an Efficient Chemical Sensor for Nitroaromatic Compounds

Lanthanide coordination polymers (Ln-CPs) are potential chemosensors when fabricated to depict a detectable change in optical properties on interaction with target analytes. This work investigates the interaction of nitroaromatic compounds with Ln-CPs leading to induced changes in fluorescence emission intensity, a crucial strategy to develop a selective and sensitive system for the sensing of nitroaromatics. Approaching toward this objective, solvothermal reactions of 2,5-thiophenedicarboxylic (2,5-TDC) acid, 1,10-phenanthroline (1,10-Phen), and Ln(NO₃)₃·xH₂O are carried out to assemble eight Ln(III) coordination polymers [Ln₂(2,5-TDC)₃(1,10-Phen)₂(H₂O)₂] [Ln = Pr (1), Nd (2)], {[Tb(2,5-TDC)_1.5(1,10-Phen)(H₂O)]·DMF} (3), and [Ln(2,5-TDC)_1.5(1,10-Phen)]·xH₂O (Ln = Tb (4), Dy (5), Ho (6), Er (7), and Yb (8)); x = 0 for CP 4, 5, 6, and 8 and x = 1 for CP 7 with two different space groups and dimensions. The as-synthesized polymers 1-8 are characterized by powder X-ray crystallography, infrared spectroscopy, and thermogravimetric analysis. The structure-corroborated density functional theory (DFT) studies are done on the selected CPs to investigate the interactions between different structural motifs of the assembled CPs. The luminescence properties of CP 4 are explored in detail and are found to be highly sensitive for the detection of p-nitrotoluene as indicated by the most intensive fluorescence quenching with the lowest limit of detection (0.88 ppm) and high quenching constant (4.3 × 10⁴ M^-1). Other nitro compounds (viz., o-nitrobenzaldehyde, m-nitroaniline, picric acid, m-dinitrobenzene, p-nitrophenol, and p-nitroaniline) are also screened for potential sensing by CP 4.

A Europium-Organic Framework Sensing Material for 2-Aminoacetophenone, a Bacterial Biomarker in Water

2-Aminoacetophenone (2-AA) is a metabolite produced in large quantities by the pathogenic bacteria Pseudomonas aeruginosa (PA), which is a biomarker for PA in water. State-of-the-art analytical techniques to detect PA usually require expensive instruments and a long analysis time which are not suitable for real-time water quality monitoring, especially for high-quality drinking water. Herein, we reported the application of a europium metal-organic framework (Eu-MOF) as a luminescent sensing material, which provides a facile, environmentally friendly and low-cost way for the fast detection of PA in water. Eu-MOF shows a high sensitivity toward 2-AA with a K_SV value of 3.563 × 10⁴ M^-1, rapid luminescence response in 12 s and high-selectivity and anti-interference ability with the existence of common detection indexes in drinking water owing to the good match of the energy levels of Eu-MOF and 2-AA. A systematical optimization of the sensing conditions to enhance the sensing function of Eu-MOF for 2-AA was discussed in detail, to give fundamentals for the rational design of MOF-based sensing materials.

Synthesis of eight isostructural 2D lanthanide coordination polymers assembled by rigid furan-2,5-dicarboxylic acid and flexible adipic acid as linkers and exploration of luminescent Eu/Tb polymers as efficient and sensitive sensors for nitroaromatic compounds

Eight isostructural coordination polymers were synthesized by a solvothermal method. The luminescent Eu/Tb polymers function as efficient sensors for nitroaromatics via turn-off mode.

Computational prediction of promising pyrazine and bipyridine analogues of a fluorinated MOF platform, MFN-Ni-L (M = SI/AL; N = SIX/FIVE; L = pyr/bipyr), for CO2 capture under pre-humidified conditions

The CO2 separation performance has been explored under dry and pre-humidified conditions for the fluorinated metal organic frameworks SIFSIX-Ni-pyr, ALFFIVE-Ni-pyr, SIFSIX-Ni-bipyr and ALFFIVE-Ni-bipyr, which are incorporated with/without a coordinatively unsaturated site (CUS), Al, and organic linkers 1,4-pyrazine and 4,4'-bipyridine. The ultra-small pore size (∼4 Å) of the pyrazine analogues of fluorinated-MOFs, i.e. SIFSIX-Ni-pyr and ALFFIVE-Ni-pyr, showed infinite selectivity towards CO2 with low uptake capability under dry conditions, which drastically reduced to 0 wt% under very low pre-humidification conditions (∼10-15 wt% adsorbed moisture). In marked contrast, the bipyridine analogues SIFSIX-Ni-bipyr and ALFFIVE-Ni-bipyr showed significant CO2 capture performance of up to 30-40 wt% with pre-humidification. Further, both SIFSIX-Ni-bipyr and ALFFIVE-Ni-bipyr showed high CO2 selectivity as well as good working capacity at 1-10 bar while poor selectivity is observed for the pyrazine analogues with pre-humidification. The incorporation of Al as a CUS provides stability to the ALFFIVE-Ni-bipyr fluorinated-MOF under pre-humidified conditions due to the ability of Al to co-ordinate with water molecules in hydrogen bonded networks. Therefore, to develop physisorption-based CO2 capturing processes under pre-humidified conditions, the use of Al incorporated ALFFIVE-Ni-bipyr is highly suitable, which may outperform most of the fluorinated-MOFs and other classes of porous solids reported so far.

A Series of Lanthanide-Based Metal-Organic Frameworks Derived from Furan-2,5-dicarboxylate and Glutarate: Structure-Corroborated Density Functional Theory Study, Magnetocaloric Effect, Slow Relaxation of Magnetization, and Luminescent Properties

Herein, through a dual-ligand strategy, we report eight isorecticular lanthanide(III) furan-2,5-dicarboxylic acid metal-organic frameworks (Ln-MOFs) with the general formula {[Ln(2,5-FDA)_0.5(Glu)(H₂O)₂]· xH₂O} _n [Ln = Sm (1), Eu (2), Gd (3), Tb (4), Dy (5), Ho (6), Er (7), and Yb (8); 2,5-FDA^2- = furan-2,5-dicarboxylate and Glu^2- = glutarate; x = 0.5 for 1, 2, and 4 and x = 0 for 3 and 5-8], synthesized under solvothermal conditions by using an N, N'-dimethylformamide/H₂O mixed solvent system. Crystallographic data reveal that all eight Ln-MOFs 1-8 crystallize in the orthorhombic Pnma space group. All of the MOFs are isostructural as well as isomorphous with distorted monocapped square-antiprismatic geometry around the Ln1 metal center. In Ln-MOFs 1-8, the 2,5-FDA^2- and Glu^2- ligands exhibit μ₂-κ⁴,η¹:η¹:η¹:η¹ and μ₃-κ⁵,η²:η¹:η¹:η¹ coordination modes, respectively. Topologically, assembled Ln-MOFs 1-8 consist of the 2D cem topological type. The designed Ln-MOFs 1-8 are further explored for structure-corroborated density functional theory study. Meanwhile, room temperature photoluminescence properties of Ln-MOFs 2 and 4 and magnetic properties of Ln-MOFs 3 and 5 have been explored in detail. A highly intense, ligand-sensitized, Ln³⁺ f-f photoluminescence emission is exhibited by Ln-MOFs 2 [Eu³⁺ (red emission)] and 4 [Tb³⁺ (green emission)]. Magnetic studies suggest weak antiferro- and ferromagnetic interactions between adjacent Gd^III ions in Ln-MOF 3, thereby displaying a large magnetocaloric effect. The magnetic data measured at T = 2 K and Δ H = 30 kOe depict that the -Δ S_m value per unit mass reaches 32.1 J kg^-1 K^-1, which is larger than most of the Gd^III-based complexes reported. The alternating-current susceptibility measurements on Ln-MOF 5 revealed that out-of-phase signals are frequency- and temperature-dependent under both 0 and 2 kOe direct-current fields, thereby suggesting a typical slow magnetic relaxation behavior with two relaxation processes. This is further supported by the Cole-Cole plots at 2.4-6 K.

Probing Optical Anisotropy and Polymorph-Dependent Photoluminescence in [Ln2 ] Complexes by Hyperspectral Imaging on Single Crystals

Two homodinuclear and one heterodinuclear lanthanide (Ln)-based complexes of the general formula [Ln₂ (bpm)(tfaa)₆ ] (Ln=Eu (1), Tb (2), Eu-Tb (3), bpm=2,2'-bipyrimidine, tfaa^- =1,1,1-trifluoroacetylacetonate) were synthesized and characterized by single-crystal photoluminescence spectroscopy and hyperspectral imaging. Complexes 1 and 2 crystallize in two polymorphic structures, while three polymorphs were isolated for 3, namely having needle-, plate-, and block-like morphologies. Single-crystal photoluminescence spectroscopy and imaging on Eu³⁺ -containing 1 and 3 revealed polymorph-dependent J-splitting of the hypersensitive ⁵ D₀ →⁷ F₂ Eu³⁺ transition as well as electric-to-magnetic dipole emission intensity ratios. According to these observations, the lowest symmetry chemical environment was attributed to the Eu³⁺ ions present in the needle-like polymorph, also in agreement with single-crystal X-ray diffraction analysis. More importantly, hyperspectral imaging on all three single-crystal polymorphs of 3 exhibits optical anisotropy with photoluminescence enhancement at specific crystallographic faces. This behavior was ascribed to the distinct molecular packing of the Ln-Ln dimers in each polymorphic crystal as well as to face-specific local symmetry of the Eu³⁺ centers. Overall, opto-structural relationships of three Ln-Ln dimers and their single-crystal polymorphs were established as a particularly promising avenue for control of photoluminescence by chemical crystal engineering.

A pair of polymorphous metal–organic frameworks based on an angular diisophthalate linker: synthesis, characterization and gas adsorption properties

A pair of polymorphous MOFs derived from a bent diisophthalate ligand were synthesized by modulating solvothermal conditions, exhibiting comparable gas adsorption properties with respect to C₂H₂, CO₂ and CH₄.

Three luminescent metal–organic frameworks constructed from trinuclear zinc(ii) clusters and furan-2,5-dicarboxylate

Three metal–organic frameworks constructed from trinuclear zinc(ii) clusters and furan-2,5-dicarboxylate with different topology were hydrothermally synthesized by adjusting the anions and solvent. Moreover, the blue luminescence of the complexes was investigated.

Mutual transformation between crystalline phases and dielectric properties of coordination polymers with the formula [Cd(N-methylimidazole)2(H2O)x(glutarate)]·nH2O (x = 0 or 1; n = 0 or 4)

Two pseudo-polymorphs obtained through controlling the crystallization temperature are mutual transformable via absorbing or losing water.

Synthesis, structure and properties of 2D lanthanide coordination polymers based on N-heterocyclic arylpolycarboxylate ligands

Eight 2D LCPs based on the N-heterocyclic arylpolycarboxylate ligands were prepared, and the luminescence and magnetic properties were studied.