A highly selective and fast-response fluorescent probe based on Cd-MOF for the visual detection of Al3+ ion and quantitative detection of Fe3+ ion

Construction of a novel Eu-MOF material based on different detection mechanisms and its application in sensing pollutants aniline, F- and Hg2

Aniline is an organic pollutant with carcinogenicity and teratogenicity, while F- and Hg2+ are toxic ions that are easily soluble in water. When they are released to the environment, they will pose a threat to human health. Designing a material that can simultaneously detect three types of pollutants is of great significance. In this paper, a novel rare earth metal organic framework material (Eu-MOF) with three-dimensional structure based on 1-methylimidazole-4,5-dicarboxylic acid was synthesized for the first time through solvent thermal method. It has excellent luminescent performance and can be used as a multifunctional fluorescent probe to detect aniline, F-, and Hg2+ based on photoinduced electron transfer, energy competitive absorption, and ion exchange mechanisms, with detection limits of 1.79 × 10-8, 8.13 × 10-8, and 8.83 × 10-7 M, respectively. It is worth noting that Eu-MOF can detect F- and Hg2+ in real water samples, such as lake water and green tea water, with favorable recovery rates.

A Coordination Polymer for the Fluorescence Turn-On Sensing of Saccharin, 2-Thiazolidinethione-4-carboxylic Acid, and Periodate

A luminescent 1D coordination polymer (CP) [Zn2L2(H2O)4]·H2O (1, H2L = 1-(4-carboxyphenyl)-1H-pyrazole-3-carboxylic acid) was prepared by a solvothermal method. 1 shows excellent fluorescence properties and has an obvious fluorescence "turn-on" phenomenon for saccharin (SAC), 2-thiazolidinethione-4-carboxylic acid (TTCA), and periodate (IO4-). Between 0 and 60 μM concentration range of SAC, the fluorescence enhancement efficiency (KEC) of 1 reaches 1.00 × 105 M-1 with the limit of detection (LOD) of 90 nM. 1 is the first CP-based sensing material for SAC detection. For TTCA detection, the KEC is 2.73 × 105 M-1 at the 25-80 μM concentration range, and the LOD is 33 nM, the lowest LOD among the sensors that detect TTCA at present. For IO4- ion detection, when the IO4- ion concentration ranges from 0 to 10 μM, the KEC is 2.34 × 105 M-1 and the LOD is as low as 39 nM. In order to better understand the sensing phenomenon, we also discuss in detail the sensing mechanisms for SAC, TTCA, and IO4- ions.

A dual-function [Ru(bpy)3]2+ encapsulated metal organic framework for ratiometric Al3+ detection and anticounterfeiting application

In this work, a novel composite material (HPU-24@Ru) has been prepared by combining a blue-emission Cd-based metal-organic framework (MOF, [Cd₂(TCPE)(DMF)(H₂O)₃]_n, HPU-24) with a red-emission tris (2,2'-bipyridine) dichlororuthenium(II) hexahydrate ([Ru(bpy)₃]²⁺) molecule for ratiometric fluorescence sensing of Al³⁺ ions in aqueous medium and high-level dynamic anticounterfeiting application. The luminescence measurement results indicated that the fluorescence intensity of HPU-24 at 446 nm showed a red shift in the presence of Al³⁺ ions, and the new peak appeared at 480 nm and continued to increase with an increase in Al³⁺ ion concentration. Meanwhile, the fluorescence intensity of [Ru(bpy)₃]²⁺ almost showed no change. The detection limit was calculated as 11.63 μM, which was better than that for the MOF-based Al³⁺ ions in some reported examples in aqueous media and achieved through strong electrostatic interactions between HPU-24@Ru and Al³⁺ ions. Moreover, owing to the particularity of the tetrastyryl structure in HPU-24, HPU-24@Ru showed intriguing temperature-dependent emission behavior. This unique structure provides the composite material HPU-24@Ru with attributes for high-level information encryption that make it difficult for counterfeiters to identify all of the right decryption measures.

Novel strategies for the formulation and processing of aluminum metal-organic framework-based sensing systems toward environmental monitoring of metal ions

Aluminum is a relatively inexpensive and abundant metal for the mass production of metal-organic frameworks (MOFs). Aluminum-based MOFs (Al-MOFs) have drawn a good deal of research interest due to their unique properties for diverse applications (e.g., excellent chemical and structural stability). This review has been organized to highlight the current progress achieved in the synthesis/functionalization of Al-MOF materials with the special emphasis on their sensing application, especially toward metal ion pollutants in the liquid phase. To learn more about the utility of Al-MOF-based sensing systems, their performances have been evaluated for diverse metallic components in reference to many other types of sensing systems (in terms of the key quality assurance (QA) criteria such as limit of detection (LOD)). Finally, the challenges and outlook for Al-MOF-based sensing systems are discussed to help expand their real-world applications.

A Luminescent Cu(II)-MOF with Lewis Basic Schiff Base Sites for the Highly Selective and Sensitive Detection of Fe3+ Ions and Nitrobenzene

A Schiff base functionalized Cu(II)-based metal-organic framework (MOF) denoted as Cu-L, was developed via a solvothermal method using low-cost starting material, i.e., Schiff base linker, 4,4'-(hydrazine-1,2-diylidenedimethylylidene)dibenzoic acid (L). Good crystallinity and thermal stability of synthesized Cu-L was confirmed by the crystallographic and thermogravimetric studies. An excellent photoluminescent properties of Cu-L ensure their suitability for the ultrafast detection of Fe³⁺ ions and nitrobenzene via a turn-off quenching response. The remarkable sensitivity of Cu-L towards Fe³⁺ ions and nitrobenzene was certified by the low limit of detection (LOD) of 47 ppb and 0.004 ppm, respectively. With incorporated free azine groups, this MOF could selectively capture Fe³⁺ ions and nitrobenzene in aqueous solution. The plausible mechanistic pathway for the quenching in the fluorescence intensity of the Cu-L in the presence of Fe³⁺ ions and nitrobenzene have been explained in detail through the density functional theory calculations, photo-induced electron transfer (PET), fluorescence resonance energy transfer (FRET), and competitive energy adsorption. This present study open a new avenue to synthesize novel crystalline MOF-based sensing materials from cheap Schiff base linkers for fast sensing of toxic pollutants.

Advances in Biosensing of Chemical Food Contaminants Based on the MOFs-Graphene Nanohybrids

Food safety issue is becoming an international challenge for human health owing to the presence of contaminants. In this context, reliable, rapid, and sensitive detecting technology is extremely demanded to establish food safety assurance systems. MOFs (Metal-organic frameworks) are a new type of porous crystalline material with particular physical and chemical characteristics presented in food safety requirements. (Bio)sensors driven MOF materials have emerged as a promising alternative and complementary analytical techniques, owing to their great specific area, high porosity, and uniform and fine-tunable pore buildings. Nevertheless, the insufficient stability and electrical conductivity of classical MOFs limit their utilization. Employing graphene-derived nanomaterials with high functional elements as patterns for the MOF materials not only improves the structural instability and poor conductivity but also impedes the restacking and aggregation between graphene layers, thus significantly extending the MOFs application. A review of MOFs-graphene-based material used in food contamination detection is urgently needed for encouraging the advance of this field. Herein, this paper systematically outlines current breakthroughs in MOF-graphene-based nanoprobes, outlines their principles, and illustrates their employments in identifying mycotoxins, heavy metal ions, pathogens, antibiotics, and pesticides, referring to their multiplexing and sensitivity ability. The challenges and limitations of applying MOF-graphene composite for precise and efficient assessment of food were also debated. This paper would maybe offer some inspired concepts for an upcoming study on MOF-based composites in the food security context.

Fluorescence-Responsive Detection of Ag(I), Al(III), and Cr(III) Ions Using Cd(II) Based Pillared-Layer Frameworks

Two Cd(II) based coordination polymers, {Cd₃(btc)₂(BTD-bpy)₂]∙1.5MeOH∙4H₂O}_n (1) and [Cd₂(1,4-ndc)₂(BTD-bpy)₂]_n (2), where BTD-bpy = bis(pyridin-4-yl)benzothiadiazole, btc = benzene-1,3,5-tricarboxylate, and 1,4-ndc = naphthalene-1,4-dicarboxylate, were hydro(solvo)thermally synthesized. Compound 1 has a three-dimensional non-interpenetrating pillared-bilayer open framework with sufficient free voids of 25.1%, which is simplified to show a topological (4,6,8)-connected net with the point symbol of (3²4²56)(3⁴4⁴5⁴6²8)(3⁴4²6¹⁹7²8). Compound 2 has a three-dimensional two-fold interpenetrating bipillared-layer condense framework regarded as a 6-connected primitive cubic (pcu) net topology. Compounds 1 and 2 both exhibited good water stability and high thermal stability approaching 350 °C. Upon excitation, compounds 1 and 2 both emitted blue light fluorescence at 471 and 479 nm, respectively, in solid state and at 457 and 446 nm, respectively, in the suspension phase of H₂O. Moreover, compounds 1 and 2 in the suspension phase of H₂O both exhibited a fluorescence quenching effect in sensing Ag⁺, attributed to framework collapse, and a fluorescence enhancement response in sensing Al³⁺ and Cr³⁺, ascribed to weak ion-framework interactions, with high selectivity and sensitivity and low detection limit.

Hierarchical Ti-MOF Microflowers for Synchronous Removal and Fluorescent Detection of Aluminum Ions

Bifunctional luminescence metal-organic frameworks with unique nanostructures have drawn ongoing attention for simultaneous determination and elimination of metal ions in the aqueous environment, but still remain a great challenge. In this work, three-dimensional hierarchical titanium metal-organic framework (Ti-MOF) microflowers were developed by a secondary hydrothermal method for not only highly sensitive and selective detection of Al(III), but also simultaneously efficient decontamination. The resulting Ti-MOF microflowers with a diameter of 5-6 μm consisted of nanorods with a diameter of ∼200 nm and a length of 1-2 μm, which provide abundant, surface active sites for determination and elimination of Al(III) ions. Because of their substantial specific surface area and superior fluorescence characteristics, Ti-MOF microflowers are used as fluorescence probes for quantitative determination of Al(III) in the aqueous environment. Importantly, the specific FL enhancement by Al(III) via a chelation-enhanced fluorescence mechanism can be utilized for selective and quantitative determination of Al(III). The Al(III) detection has a linear range of 0.4-15 µM and a detection limit as low as 75 nM. By introducing ascorbic acid, interference of Fe(III) can be avoided to achieve selective detection of Al(III) under various co-existing cations. It is noteworthy that the Ti-MOF microflowers exhibit excellent adsorption capacity for Al(III) with a high adsorption capacity of 25.85 mg g^-1. The rapid adsorption rate is consistent with a pseudo-second order kinetic model. Ti-MOF is a promising contender as an adsorbent and a fluorescent chemical sensor for simultaneous determination and elimination of Al(III) due to its exceptional water stability, high porosity, and intense luminescence.

Fe-Based Metal-Organic Frameworks for the Controlled Release of Fertilizer Nutrients

Due to the controlled-delivery function of metal-organic frameworks (MOFs) for gases, drugs, and pesticides, iron-based MOFs (Fe-MOFs) were explored in the laboratory as a novel fertilizer, which showed potential for use in the fertilizer industry; the challenge in the industrial scale application of Fe-MOFs in practical crop production was mainly the impact of scaling-up to energy and heat transfer, as well as the reaction yield. In this study, Fe-MOFs were hydrothermally synthesized both in the laboratory scale and in the pilot scale, their structure and components were characterized using various spectroscopic techniques, and then their nutrient release and degradation behaviors were investigated. The results showed that Fe-MOFs were successfully synthesized in both scales with similar yields around 27%, and the Fe-MOFs showed a similar structure with the molecular formula of C₂H₁₅Fe₂N₂O₁₈P₃. The nutrients N, P, and Fe were present in the Fe-MOFs with the average contents of 6.03, 14.48, and 14.69%, respectively. Importantly, the nutrient release rate and pattern of Fe-MOFs well matched with the crop growth, which greatly promoted the rice yield. Therefore, the environmentally friendly compounds of Fe-MOFs could be industrially produced and used as an innovative fertilizer with unique features of varied nutrients and controlled release.

A Ni-MOF based luminescent sensor for selective and rapid sensing of Fe(ii) and Fe(iii) ions

In this work, a bis(N,N-trimellitoyl)-4,4′-oxydianiline linker was synthesized and characterized by spectroscopic techniques. The molecular structure and luminescence intensity of the Ni-MOF treated with different metal ions were investigated.

Construction of a Luminescent Cadmium-Based Metal-Organic Framework for Highly Selective Discrimination of Ferric Ions

Fluorescent metal–organic frameworks (MOFs) are ideal materials for sensors because of their adjustable pore size and functional groups, which provide them with favorable metal ion selective recognition. In this paper, a new cadmium-based MOF was synthesized using Cd(NO₃)₂·4H₂O and 3,3′,5,5′-biphenyltetracarboxylic acid by solvothermal method. CdBPTC owned three types of channels with dimensions of approximately 8.4 × 8.3 Å, 6.0 × 5.2 Å, 9.7 × 8.4 Å along a, b, and c axis, respectively. This MOF has high selectivity to ferric ions and shows excellent anti-inference ability toward many other cations. The results indicate that the fluorescence quenching efficiency of CdBPTC is close to 100% when the concentration of Fe³⁺ reaches 1.0 × 10⁻³ mol·L⁻¹. Moreover, the luminescent intensity at 427 nm presents a linear relationship at a concentration range of 2.0 × 10⁻⁴~7.0 × 10⁻⁴ mol·L⁻¹, which can be quantitatively expressed by the linear Stern–Volmer equation I₀/I = 8489 [Fe³⁺] − 0.1400, which is comparable to the previously reported better-performing materials. Competitive energy absorption and ion exchange may be responsible for the variation in fluorescence intensity of CdBPTC in different Fe³⁺ concentrations.

Recent advances in molecular logic gate chemosensors based on luminescent metal organic frameworks

Luminescent metal-organic frameworks (LMOFs) as chemosensors, can sense various analytes, such as heavy metal ions, antibiotics, pesticides, and small biological molecules. Based on the fluorescence characteristics of LMOFs, a variety of logic gates have been developed. In this review, we mainly discuss some common logic systems based on LMOFs, and then summarize the strategies of constructing logic gates from two perspectives. One is based on superior characteristics of MOFs, which can be synthesized from Ln3+ based MOFs (Ln-MOFs) or form hybrids by encapsulating different materials, including metal ions, dyes, and quantum dots (QDs). The other is to control the presence of inputs by reactions between different reactants and then further control switches of logic gates. Additionally, the common sensing mechanisms of LMOFs in logic gates are discussed. In the end, we have envisioned MOFs that possess a promising future in logic computing areas.

Highly Sensitive Colorimetric Naked-Eye Detection of HgII Using a Sacrificial Metal-Organic Framework

This study has developed a specific, easy, and novel approach to designing a sacrificial metal-organic framework (MOF) that can detect and measure the amount of Hg²⁺ in aqueous and nonaqueous solutions using the naked eye. The functionalized [Zn(oba)(RL3)_0.5]_n·1.5DMF (TMU-59) provides the ability of simple visual assessment or colorimetric readout without sophisticated analytical equipment. Because of the special interaction with Hg²⁺, degradation of the structure of this unique MOF causes the solution to change color from colorless to a pink that is easily recognizable to the naked eye. The presence of a methyl group plays a major role in naked-eye detection by a qualitative sensor. Furthermore, this qualitative sensor data for the production of a simple, instant, and portable red, green, and blue (RGB)-based quantitative sensor were used to determine the concentration of Hg²⁺ in different specimens. As a turn-off fluorescence sensor, this unique structure is also capable of detecting Hg²⁺ at very low concentrations (the limit of detection is 0.16 ppb). To the best of our knowledge, TMU-59 is the first MOF-based naked-eye sensor that can successfully and specifically display the presence of Hg²⁺ through a major color change.

Response of a Zn(II)-based metal-organic coordination polymer towards trivalent metal ions (Al3+, Fe3+ and Cr3+) probed by spectroscopic methods

A new zinc-based two-dimensional coordination polymer, [Zn(5-AIP)(Ald-4)]·H2O (5-AIP = 5-amino isophthalate, Ald-4 = aldrithiol-4), 1, has been synthesized at room temperature by the layer diffusion technique. Single-crystal X-ray diffraction analysis of 1 showed a two-dimensional bilayer structure. An aqueous suspension of 1 upon excitation at 300 nm displayed an intense blue emission at 403 nm. The luminescence spectra were interestingly responsive and selective to Al3+, Cr3+ and Fe3+ ions even in the presence of other interfering ions. The calculated detection limits for Al3+, Cr3+ and Fe3+ were 0.35 μM ([triple bond, length as m-dash]8.43 ppb), 0.46 μM ([triple bond, length as m-dash]22.6 ppb) and 0.30 μM ([triple bond, length as m-dash]15.85 ppb), respectively. Notably, with the cumulative addition of Al3+ ions, the luminescence intensity at 403 nm decreased steadily with a gradual red shift up to 427 nm. Afterward, this red shifted peak showed a turn-on effect upon further addition of Al3+ ions. On the other hand, for Cr3+ and Fe3+ ions, there was only drastic luminescence quenching and a large red shift up to 434 nm. This indicated the formation of a complex between 1 and these metal ions, which was also supported by the UV-Visible absorption spectra of 1 that showed the appearance of a new band at 280 nm in the presence of these three metal ions. The FTIR spectra revealed that these ions interacted with the carboxylate oxygen atom of 5-AIP and the nitrogen atom of the Ald-4 ligand in the structure. The luminescence lifetime decay analysis manifested that a charge-transfer type complex was formed between 1 and Cr3+ and Fe3+ ions that resulted in huge luminescence quenching due to the efficient charge transfer involving the vacant d-orbitals, whereas for Al3+ ions having no vacant d-orbital, turn-on of luminescence occurred because of the increased rigidity of 1 upon complexation.

One-step synthesis of fluorescence-enhanced carbon dots for Fe (III) on-off-on sensing, bioimaging and light-emitting devices

Carbon quantum dots (CDs), as one of the most potential fluorescent sensing materials, have attracted lots of attention in recent years. However, the low quantum yields, complicated separation and purification procedures have limited its application and large-scale production. In this paper, a facile and universal method was successfully developed to synthesize CDs-silica (SiO₂) spheres composites (CS composites), which not only demonstrates 10-fold fluorescence enhancement compared with single CDs but also enables the purification with a simple centrifugation step. Meanwhile, fabricated composites also presented superior photoluminescence (PL) stability and high PL intensity, even in some tough environments such as acid/alkali aqueous solution, high/low temperature, and high ion concentration aqueous solution. This simple, fast, low-cost, and efficient synthesis method would potentially expand the application of CDs for clinical analysis, optical sensing (ferric ion (Fe³⁺) and pyrophosphate), bioimaging and light-emitting diodes (LEDs).

A Multi-response Aluminum Metal-organic Frameworks for Fluorescence Sensing of Fe3+, Sr2+, SiO32-and Toluene

A new Aluminum metal-organic frameworks(Al-MOF) based on tricarboxylate ligands(L){L = 2,2',2'-([1,3,5]-triazine-2,4,6-triimino)tribenzoic acid)} has been designed and synthesized. It can be served as a platform of multi-responsive fluorescence sensor for Fe³⁺, Sr²⁺and SiO₃^2-in water, which is mainly due to the significant enhancement effect of these ions on the fluorescence intensity of Al-MOF. Especially, Fe³⁺ions are rarely able to induce MOFs fluorescence enhancement. The limit of detection for three kinds of ions is 6.62* 10^-6M, 5.37* 10^-6M, 6.85* 10^-10M respectively. Meanwhile, It can also be used as a multi-response fluorescence probe to detect toluene in DMF solution, limit of detection is 9.16* 10^-3M respectively. The structure of Al-MOF was characterized by FTIR,¹H NMR, SEM, TAG, PXRD and element analysis. The PXRD showed that the structure of Al-MOF remained the high water stability and pH stability. The application of water samples and vegetables showed that Al-MOF had high sensitive detection for Fe³⁺ions.

A Photoluminescent Cd(II) Coordination Polymer with Potential Active Sites Exhibiting Multiresponsive Fluorescence Sensing for Trace Amounts of NACs and Fe3+ and Al3+ Ions

The elaborately designed π-electron-rich fluorescent ligand 1,4-bis(1-carboxymethylene-4-imidazolyl)benzene (H₂L), possessing bifunctional groups including the carboxylate groups (building units) and 4-imidazoyl groups (N-donor potential active sites) has been employed to construct fluorescent coordination polymers. A luminescent sensor, namely [Cd(L)(phen)₂]·5H₂O (1), was obtained, which has a one-dimensional structure. The fluorescent material shows a blue emission maximum at 457 nm with a luminescence lifetime of 488 ns and a quantum yield (QY) of 4.56%. Significantly, 1 serves as a promising multiresponsive luminescent sensor to detect trace nitroaromatic compounds (NACs) with the limits of detection (LOD) of 7.21 × 10^-8, 1.85 × 10^-5, and 1.15 × 10^-5 mol/L for 2-nitrophenol (2-NP), 3-nitrophenol (3-NP), and 4-nitrophenol (4-NP), respectively. Furthermore, CP 1 exhibits fluorescent turn-off and turn-on sensing behavior for Fe³⁺ and Al³⁺ metal ions with trace amounts of 1.05 × 10^-7 and 1.13 × 10^-7 mol/L, respectively. Experimental methods and theoretical calculations were employed to elucidate the sensing mechanism in detail.

A novel quinoline-based turn-on fluorescent probe for the highly selective detection of Al (III) and its bioimaging in living cells, plants tissues and zebrafish

A novel quinoline fluorescent probe QNP ((E)-N'-(5-chloro-2-hydroxybenzylidene) quinoline-2-carbohydrazide) for detection of Al3+ ion was designed, synthesized and characterized. QNP displayed a high fluorescence enhancement in the presence of Al3+ ion in DMF:PBS (99:1, v/v) solution and the detection limit was as low as 1.25 μM with high selectivity and excellent sensitivity from 0 to 3 μM. The sensing ability of QNP towards Al3+ ion is attributed to the synergistic effect of PET and ICT. Furthermore, the binding stoichiometry between QNP and Al3+ ion is of 1:1 by Job's plot and mass spectrum, and the calculated binding constant is 4.29 × 108 M-1. The detection of Al3+ ion in water samples illustrates that QNP could be applied to the detection of practical samples in the environment. Bioimaging experiments on Hela cells, zebrafish and soybean root tissues demonstrate that it has potential application to investigate biological processes involving Al3+ ion within living cells. A quinoline-based turn-on fluorescence probe for the detection of Al3+ and its bioimaging in living cells, plant, and zebrafish.

A Bifunctional Coordination Polymer for Al3+ Ion Detection and its Treatment Effect on Nonalcoholic Fatty Liver Disease by Promoting Lipoxygenases and Reducing Intrahepatic Triglyceride Content

In this study, a new Cd(II)-bearing coordination polymer with the chemical formula of {[Cd4(meda)3(dpe)4(H2O)4]·(NO3)2·2(H2O)}n (1, H2meda = 3,3'-methylenedibenzoic acid, dpe = 1,2-di(pyridin-4-yl)ethane) has been successfully prepared by reaction of Cd(NO3)·4H2O with a V-shape carboxyl ligand H2meda along with the linear dipyridine ligand dpe under the hydrothermal conditions. Due to its intensive luminescence, complex 1 could be utilized as the sensor of detecting Al3+ ion, and its detection limit is 4 × 10-6 M. Firstly, the toxicity of the compound on the normal liver cells was determined with Cell Counting Kit-8 detection kit. The triglyceride in liver cells was detected by detection kit after compound treatment and the relative expression of 15-lox and 12-lox in L02 cells was also measured by RT-PCR after compound treatment. In addition, multiple functional groups that provided by the synthesized Cd(II) complex have been studied by using molecular docking simulation for the confirmation of possible binding modes that formed between ligand and receptor.

A metal–organic framework featuring highly sensitive fluorescence sensing for Al3+ ions

A new fluorescent MOF can detect Al3+ ions with high selectivity and sensitivity via turn-off effect and emission color change.

Dramatic luminescence signal from a Co(ii)-based metal–organic compound due to the construction of charge-transfer bands with Al3+ and Fe3+ ions in water: steady-state and time-resolved spectroscopic studies

A Co(ii)-based metal–organic compound exhibits luminescence turn-on by Al³⁺ and quenching by Fe³⁺ due to the formation of charge-transfer complexes/adducts.

An adjustable dual-emission fluorescent metal-organic framework: Effective detection of multiple metal ions, nitro-based molecules and DMA

A novel multifunctional Pb(II)-based MOF, [Pb_1.5(DBPT)]₂·(DMA)₃(H₂O)₄ (1), with excellent chemical stability, was successfully assembled by connecting {Pb₂O₁₀} unit with a multi-topic polycarboxylate ligand of 3-(3,5-dicarboxylphenyl)-5-(4-carboxylphenyl)-1-H-1,2,4-triazole (H₃DBPT). It exhibits dual fluorescence emissions at 380 nm (λ_ex = 280 nm) and 540 nm (λ_ex = 380 nm), respectively. Through the adjustable dual fluorescence emissions, it could act as a turn-off and turn-on switch for detecting N,N-dimethylacetamide (DMA) molecule. Moreover, Fe³⁺ ions exert luminescence quenching role on compound 1 at both excitation lengths in water, among which the quenching at λ_ex = 280 nm is of high sensitivity (K_SV = 1.2 × 10⁵), and the quenching at λ_ex = 380 nm is of wide-range. The sensing for metal ions of In³⁺, Zr⁴⁺, and Al³⁺ is also effective at λ_ex = 280 nm, with the K_SV constants of 1.6 × 10⁵, 1.6 × 10⁵, and 4.3 × 10⁴, respectively. More importantly, a series of nitroaromatic compounds (TNP, 2,4,6-trinitrophenol; 4-NA, 4-nitroaniline; NB, nitrobenzene) and nitro-based drugs (MNZ, metronidazole; DMZ, dimetridazole) could be detected at both excitation lengths, demonstrating the advantage of broad range response of fluorescence sensing. Thanks to the excellent chemical stability and unusual dual emission luminescence properties for chemical detection of various metal ions, nitro-based molecules and DMA solvent, the Pb-based MOF reported in this work is, therefore, a very promising multi-response sensor.