Synthesis of a novel dexamethasone intercalated layered double hydroxide nanohybrids and their deposition on anodized titanium nanotubes for drug delivery purposes

Hygroscopic Mg-Al LDHs composite microspheres for highly efficient hyperspectral camouflage in the VIS and NIR wavebands

In order to enhance the hyperspectral camouflage efficacy of stealth coatings against a natural vegetative backdrop, LiCl, known for its significant hygroscopic properties, was incorporated into green Mg-Al layered double hydroxide (Mg-Al LDHs) material. Micron-sized composite microspheres were subsequently synthesized via the spray-drying granulation technique. The structure, morphology, and chemical composition of these microspheres were thoroughly characterized by X-ray diffraction, scanning electron microscopy, laser particle size analysis, nitrogen adsorption-desorption isotherms, and Fourier-transform infrared spectroscopy. The effect of LiCl content on the moisture absorption capacity and near-infrared reflectance spectra of the microspheres was systematically evaluated. We found that incorporating an optimal amount of LiCl into the internal pores of the Mg-Al LDHs microspheres did not compromise their smooth surface morphology and uniform particulate distribution. Notably, when the LiCl content was 10%, the maximum saturation moisture uptake ratio of the coating increased to 0.75 g/g. This hygroscopicity significantly enhanced the absorption and scattering of near-infrared radiation by the coating while concurrently improving its ability to modulate the shape and reflectance of both the visible and near-infrared spectral curves. Spectral congruence between the synthetic coating and natural green foliage was quantified at 97.41%. Moreover, this performance was maintained over 10 cycles of programmed drying and re-humidification, and the coating consistently demonstrated stable hygroscopic properties and sustained over 95% spectral congruence. These optimized artificial coatings were found to effectively confuse hyperspectral classification algorithms, thus blending seamlessly into a natural foliage backdrop. This study provides a new method for regulating VIS and NIR spectral (visible-near infrared spectrum) features, which will be critical for applications in advanced hyperspectral camouflage materials.

Layered Double Hydroxides: A Novel Promising 2D Nanomaterial for Bone Diseases Treatment

Bone diseases including bone defects, bone infections, osteoarthritis, and bone tumors seriously affect life quality of the patient and bring serious economic burdens to social health management, for which the current clinical treatments bear dissatisfactory therapeutic effects. Biomaterial-based strategies have been widely applied in the treatment of orthopedic diseases but are still plagued by deficient bioreactivity. With the development of nanotechnology, layered double hydroxides (LDHs) with adjustable metal ion composition and alterable interlayer structure possessing charming physicochemical characteristics, versatile bioactive properties, and excellent drug loading and delivery capabilities arise widespread attention and have achieved considerable achievements for bone disease treatment in the last decade. However, to the authors' best knowledge, no review has comprehensively summarized the advances of LDHs in treating bone disease so far. Herein, the advantages of LDHs for orthopedic disorders treatment are outlined and the corresponding state-of-the-art achievements are summarized for the first time. The potential of LDHs-based nanocomposites for extended therapeutics for bone diseases is highlighted and perspectives for LDHs-based scaffold design are proposed for facilitated clinical translation.

Investigation and multiscale modeling of PVA/SA coated poly lactic acid scaffold containing curcumin loaded layered double hydroxide nanohybrids

Applying hydrophilic coatings on polymeric nanofibers combined with layered double hydroxide (LDH) not only enhances the efficiency of drug delivery systems but also increases cell adhesion. This work aimed to prepare poly(vinyl alcohol)/sodium alginate (PVA/SA) (2/1)-coated poly(lactic acid) (PLA) nanofibers containing curcumin-loaded layered double hydroxide (LDH) and to investigate their drug release and mechanical properties and their biocompatibility. The optimum PLA nanofibrous sample was considered to be that based on 3 wt% of curcumin-loaded LDH (PLA-3%LDH) with a drug encapsulation efficiency of ∼18% in which a minimum average nanofiber diameter of ∼476 nm along with a high tensile strength of 3.00 MPa were obtained. In the next step, a PVA/SA (2/1) layer was coated on the PLA-3%LDH; as a result, the hydrophilicity of the sample was improved and the elongation at break was decreased remarkably. In this regard the cell viability reached 80% for the coated PLA. Moreover, the formation of a layer of (PVA/SA) on the PLA nanofibers lowered the burst release and resulted in a more sustained drug release, which is a vital feature in dermal applications. A multiscale modeling method was applied for simulation of the mechanical properties of the composite scaffold and the results showed that this method can predict the data with 83% accuracy. The results of this study indicate that the formation of a layer of PVA/SA (2/1) has a significant effect on hydrophilicity and consequently improves cell adhesion and proliferation.

A novel co-culture assay to evaluate the effects of sympathetic innervation on vascular smooth muscle differentiation

Dedifferentiation of vascular smooth muscle cells (VSMCs) from a functional phenotype to an inverse synthetic phenotype is a symptom of cardiovascular disorders, such as atherosclerosis and hypertension. The sympathetic nervous system (SNS) is an essential regulator of the differentiation of vascular smooth muscle cells (VSMCs). In addition, numerous studies suggest that SNS also stimulates VSMCs to retain their contractile phenotype. However, the molecular mechanisms for this stimulation have not been thoroughly studied. In this study, we used a novel in vitro co-culture method to evaluate the effective cellular interactions and stimulatory effects of sympathetic neurons on the differentiation of VSMCs. We co-cultured rat neural-like pheochromocytoma cells (PC12) and rat aortic VSMCs with this method. Expression of VSMCs contractile genes, including smooth muscle actin (acta2), myosin heavy chain (myh11), elastin (eln), and smoothelin (smtn), were determined by quantitative real-time-PCR analysis as an indicator of VSMCs differentiation. Fold changes for specific contractile genes in VSMCs grown in vitro for seven days in the presence (innervated) and absence (non-innervated) of sympathetic neurons were 3.5 for acta2, 6.5 for myh11, 4.19 for eln, and 4 for smtn (normalized to Tata Binding Protein (TBP)). As a result, these data suggest that sympathetic innervation promotes VSMCs' contractile gene expression and also maintains VSMCs' functional phenotype.

In Vitro and In Vivo Evaluation of Hydroxypropyl-β-cyclodextrin-grafted-poly(acrylic acid)/poly(vinyl pyrrolidone) Semi-Interpenetrating Matrices of Dexamethasone Sodium Phosphate

In this paper, we fabricated semi-interpenetrating polymeric network (semi-IPN) of hydroxypropyl-β-cyclodextrin-grafted-poly(acrylic acid)/poly(vinyl pyrrolidone) (HP-β-CD-g-poly(AA)/PVP) by the free radical polymerization technique, intended for colon specific release of dexamethasone sodium phosphate (DSP). Different proportions of polyvinyl pyrrolidone (PVP), acrylic acid (AA), and hydroxypropyl-beta-cyclodextrin (HP-β-CD) were reacted along with ammonium persulphate (APS) as initiator and methylene-bis-acrylamide (MBA) as crosslinker to develop a hydrogel system with optimum swelling at distal intestinal pH. Initially, all formulations were screened for swelling behavior and AP-8 was chosen as optimum formulation. This formulation was capable of releasing a small amount of drug at acidic pH (1.2), while a maximum amount of drug was released at colonic pH (7.4) by the non-Fickian diffusion mechanism. Fourier transformed infrared spectroscopy (FTIR) revealed successful grafting of components and development of semi-IPN structure without any interaction with DSP. Thermogravimetric analysis (TGA) confirmed the thermal stability of developed semi-IPN. X-ray diffraction (XRD) revealed reduction in crystallinity of DSP upon loading in the hydrogel. The scanning electron microscopic (SEM) images revealed a rough and porous hydrogel surface. The toxicological evaluation of semi-IPN hydrogels confirmed their bio-safety and hemocompatibility. Therefore, the prepared hydrogels were pH sensitive, biocompatible, showed good swelling, mechanical properties, and were efficient in releasing the drug in the colonic environment. Therefore, AP-8 can be deemed as a potential carrier for targeted delivery of DSP to treat inflammatory bowel diseases.

Experimental investigation and finite element modelling of PMMA/carbon nanotube nanobiocomposites for bone cement applications

Multi-walled carbon nanotubes (MWCNTs) are one of the preferred candidates for reinforcing polymeric nanobiocomposites, such as acrylic bone type of cement. In this study, at first, bulk samples of the reinforced polymethylmethacrylate (PMMA) matrix were prepared with 0.1, 0.25, and 0.5 wt per wt% of MWCNTs by the casting method. Tensile and three-point bending tests were performed to determine the essential mechanical properties of bone cement, such as tensile and bending strengths. The tensile fracture surfaces were investigated by scanning electron microscopy (SEM). The commercial software (Abaqus) was used to conduct finite element analysis (FEA) by constructing a representative volume element (RVE) model for numerically computing the tensile and bending parameters of PMMA-MWCNT nanocomposites. Finally, MTT assays were utilized to evaluate the cell viability on the surface of nanobiocomposites. The results show that by increasing the MWCNT amount in the PMMA-based cement, the bending strengths (BS), tensile strength (TS), and elastic modulus (EM) increased considerably. Furthermore, the disparity between the FEA and experimental TS, EM, and BS values was less than 20%. According to MTT viability experiments, adding MWCNTs to PMMA had no influence on PMMA toxicity and resulted in a negative response to interaction with mesenchymal stem cells. The cell density on the nanobiocomposite was more than pristine-PMMA.

Red Fluorescence of Eu3+-Doped ZnAl-LDH Response to Intercalation and Release of Ibuprofen

A drug delivery system with identification function is attractive and important. For this reason, the red fluorescence of Eu³⁺-doped ZnAl-LDH response to intercalation and release of ibuprofen (IBU) has been studied. X-ray diffraction(XRD) results showed that the basal spacing of the Eu³⁺-doped ZnAl-LDH varied from 8.85 to 12.04 Å after the intercalation of IBU. The release of the IBU from the Eu³⁺-doped ZnAl-LDH was carried out in simulated intestinal medium (phosphate buffer solutions with pH 7.4 and 37 °C), and the releasing behavior of IBU exhibited an initial rapid release followed by a slow release. Moreover, the present delivery system has slower release of drug than those of other LDH-based delivery systems. Interestingly, the intercalation of IBU into the Eu³⁺-doped ZnAl-LDH obviously reduced the red fluorescence of the Eu³⁺-doped ZnAl-LDH, whereas the red fluorescence was recovered after the release of IBU. This fluorescent responsiveness may be a favorable signal for detecting the delivery and release of IBU. Therefore, the Eu³⁺-doped ZnAl-LDH with red fluorescence would be potential application as drug delivery system with identification function because of its cheapness, non-toxicity, good biocompatibility, and little damage to biological tissue.

Layered Double Hydroxides as Promising Excipients for Drug Delivery Purposes

Layered Double Hydroxides (LDH) have received great attention in the development of drug carrier systems. LDHs have become intelligent excipients of high technological potential for the pharmaceutical industry due to their ability to intercalate biomaterials in the interlayer region, adsorb substances on its vast surface area, have flexible structure, swelling properties, high chemical and thermal stability, modulate drug release, have high biocompatibility and be easily synthesized. This article, using typical examples, mainly addresses the systems formed between LDHs and antimicrobial, antineoplastic and anti-inflammatory agents, which constitute the main pharmacological classes of wide interest due to the problems encountered with low solubility, control in administration, stability in body fluids and toxicity, among others. Additionally, the article also reports on the recent development of ternary or quaternary (multicomponent systems) compounds based on LDH, bringing the advantages of targeted therapy, improving the aqueous stability of nanohybrids and the performance of these inorganic carriers.

Evolution of anodised titanium for implant applications

Anodised titanium has a long history as a coating structure for implants due to its bioactive and ossified surface, which promotes rapid bone integration. In response to the growing literature on anodised titanium, this article is the first to revisit the evolution of anodised titanium as an implant coating. The review reports the process and mechanisms for the engineering of distinctive anodised titanium structures, the significant factors influencing the mechanisms of its formation, bioactivity, as well as recent pre- and post-surface treatments proposed to improve the performance of anodised titanium. The review then broadens the discussion to include future functional trends of anodised titanium, ranging from the provision of higher surface energy interactions in the design of biocomposite coatings (template stencil interface for mechanical interlock) to techniques for measuring the bone-to-implant contact (BIC), each with their own challenges. Overall, this paper provides up-to-date information on the impacts of the structure and function of anodised titanium as an implant coating in vitro and in/ex vivo tests, as well as the four key future challenges that are important for its clinical translations, namely (i) techniques to enhance the mechanical stability and (ii) testing techniques to measure the mechanical stability of anodised titanium, (iii) real-time/in-situ detection methods for surface reactions, and (iv) cost-effectiveness for anodised titanium and its safety as a bone implant coating.