A new cationic silver(I)/melamine coordination polymer, [Ag2(melamine)]2+: Synthesis, characterization and potential use for aqueous contaminant anion exchange

Amphoteric composite of ZrP and N-doped porous carbon: Synthesis, characterization, and potential use for cycloaddition of CO2

Composites of amorphous ZrP and N-doped carbon were prepared in a one-step pyrolysis process instead of general post-loading technique. Owing to their mesoporous structure (6-10 nm) and Zr content (up to 41 wt%), the amphoteric materials have potential use in the cycloaddition of CO2 to epoxides, which is an acid‒base tandem process including the ring opening of epoxides and the addition of CO2. Substantial work has been done on how starting materials impact the structure and performance of composite materials. The coordination between metal and melamine has been confirmed, and it can be implanted in the melamine-polymer initiation of formation of porous metal-carbon materials. The composite catalysts exhibit amphoteric properties, present broad-spectrum adsorption, and finally produce carbonates via cycloaddition of CO2 to epoxides. It is remarkable that the multiple characteristics of porous solids are stabilized, and no significant loss of catalytic performance is observed after four cycles.

Recent progress in high-performance environmental impacts of the removal of radionuclides from wastewater based on metal-organic frameworks: a review

The nuclear industry is rapidly developing and the effective management of nuclear waste and monitoring the nuclear fuel cycle are crucial. The presence of various radionuclides such as uranium (U), europium (Eu), technetium (Tc), iodine (I), thorium (Th), cesium (Cs), and strontium (Sr) in the environment is a major concern, and the development of materials with high adsorption capacity and selectivity is essential for their effective removal. Metal-organic frameworks (MOFs) have recently emerged as promising materials for removing radioactive elements from water resources due to their unique properties such as tunable pore size, high surface area, and chemical structure. This review provides an extensive analysis of the potential of MOFs as adsorbents for purifying various radionuclides rather than using different techniques such as precipitation, filtration, ion exchange, electrolysis, solvent extraction, and flotation. This review discusses various MOF fabrication methods, focusing on minimizing environmental impacts when using organic solvents and solvent-free methods, and covers the mechanism of MOF adsorption towards radionuclides, including macroscopic and microscopic views. It also examines the effectiveness of MOFs in removing radionuclides from wastewater, their behavior on exposure to high radiation, and their renewability and reusability. We conclude by emphasizing the need for further research to optimize the performance of MOFs and expand their use in real-world applications. Overall, this review provides valuable insights into the potential of MOFs as efficient and durable materials for removing radioactive elements from water resources, addressing a critical issue in the nuclear industry.

Effect of sulfur doping of zinc-imidazole coordination polymer (ZnIm CP) as a novel photocatalyst for degradation of ionic dyes

Zinc-Imidazole coordination polymer (ZnImCP) was simply synthesized hydrothermally at relatively low temperature (70 °C) from zinc acetate and imidazole. ZnImCP was treated by sulfide solution to produce sulfur-doped samples (S-ZnImCPs). Structures of the synthesized ZnImCP and S-ZnImCPs were characterized through FTIR, PXRD, and, Raman, SEM/EDX, N2-BET, UV–VIS DRS, and pHpzc analyses. The photocatalytic performances of pristine CP and sulfur modified CPs under visible and ultra-violet irradiations for degrading the cationic methylene blue (MB) and the anionic methyl orange (MO) were investigated considering different initial pH values 4, 7 and 10. Under visible light, the results indicate that these CPs display considerable photocatalytic degradation towards the cationic MB for the initial pH 4 and 7 where degradation increases with sulfur content. While under ultra-violet, results indicate considerable photocatalytic degradation towards both dyes for the initial pH 7 and 10 where degradation increases with sulfur content which indicates the gainful of non-metal dopping. The buffering nature of CPs and the type of radiation considering determined band-gap values effectively influence the degradation mechanisms.

Structural and Antimicrobial Characterization of Co-Crystal [Ni(bpy)(acr)2(H2O)]·MA

A new co-crystal with the formula [Ni(bpy)(acr)2(H2O)]·MA (bpy = 2,2′-bipyridine, acr = acrylate and MA = melamine) has been synthesized and characterized using IR, UV-Vis, thermogravimetric analysis and single crystal X-ray diffraction. The complex contains discrete unities of [Ni(bpy)(acr)2(H2O)] and melamine linked in a complex network by both hydrogen bonds and π-π stacking interactions. Structural characterization revealed that Ni(II) adopts an octahedral distorted stereochemistry, and acrylate ions present both unidentate and chelate coordination modes. Thermal decomposition occurs in four steps, the ligands being stepwise released in the order of water, acrylate, bipyridine and melamine. The antimicrobial activity of the obtained complex, its precursor ([Ni(bpy)(acr)2(H2O)]) and melamine were assessed against planktonic (minimal inhibitory concentration—MIC) and biofilm-embedded (minimal biofilm eradication concentration—MBEC) Gram-positive and Gram-negative bacterial strains. The obtained results revealed that the new complex and its precursor exhibited a superior activity compared to MA, the highest susceptibility being recorded for the Staphylococcus aureus strain. The MIC and MBEC ranges were very similar, indicating the potential of this complex and its precursor to develop novel anti-biofilm agents.

Two-dimensional coordination polymers with high proton conductivity and ultrafast highly efficient molecular sieving constructed by the structural inductive effect

A family of unique 2D-layered Cu-based coordination polymers (abbreviated as HNNU-1α, 1β and 1γ) with different halide anions were successfully constructed using a zwitterion pyridiniumolate as the structural inductive agent (SIA). More importantly, we found that the laminates of HNNU-1α exhibit ultrafast highly-efficient molecular sieving in a water system, and HNNU-1α to 1γ display a good proton conductivity of ca. 2.2 × 10^-2, 4.9 × 10^-5, and 3.0 × 10^-4 S cm^-1 at 90 °C and 98% relative humidity (RH), respectively.

Activation of Cadmium–Imidazole Buffering Coordination Polymer by Sulfur-Doping for the Enhancement of Photocatalytic Degradation of Cationic and Anionic Dyes Under Visible Light

The buffering Cadmium–Imidazole Coordination Polymer (Cd–Im-CP) was synthesized hydrothermally from cadmium chloride and imidazole at 70 °C and then was subjected to doping- by the non-metal sulfur using Na2S solution as a novel modification strategy to produce S–Cd–Im CPs. To investigate doping nature and its effects, Cd–Im CP and S–Cd–Im CPs were characterized applying different analyses techniques, FTIR, Raman, PXRD, SEM/EDX, TGA, and UV–Vis DRS analyses. Characterizations showed the successful chemical doping of sulfur. The inclusion of sulfur within chemical CP structure caused narrowing of material’s bandgap from 4.55 and 3.4 eV to 4.25 and 2.35 eV for S–Cd–Im CPs allowing it for photoresponse towards Visible-light. Both Cd–Im CP and S–Cd–Im CPs were applied for photocatalytic degradation of the selected dyes methylene blue (MB),and methyl orange (MO) employing visible and UV irradiations considering three different initial pH levels to investigate the consequence of sulfur doping. After eliminating the photolysis effect, the best degradation by S–Cd–Im CPs was recorded for MB at initial pH 4 being 13 fold that is for Cd–Im CP. The highest apparent turnover frequencies are 1.2 × 10−3 h−1 for MB at initial pH 10 and 1.03 × 10−4 h−1 for MO at initial pH 4 are given by 10S–Cd–IM CP under Visible-light. Generally, S–Cd–Im CPs remarkably improved photocatalysis degradation of both the dyes for all initial pH levels under Visible-light.

Crystal engineering with copper and melamine

Coordination complexes and polymers are central in inorganic and materials chemistry as a variety of metal centers and coordination geometries lead to a diverse range of interesting properties. Here, size and structure control of gem-like quality monocrystals is demonstrated at room temperature. Using the same set of precursors, the copper-to-melamine molar ratio is adjusted to synthesize either a novel coordination complex of dinuclear copper and melamine (Cu2M1), or a barely-studied coordination polymer of zigzag copper-chlorine chains (Cu4M1). Crystals of the former are dark green and square with a size up to 350 μm across. The latter is light green, octagonal, and as large as 5 mm across. The magnetic properties of both crystals reflect the low-dimensional arrangements of copper. The magnetic susceptibility of Cu2M1 is modelled with a spin-1/2 dimer, and that of Cu4M1 with a spin-1/2 one-dimensional Ising chain. Controlled synthesis of such quality magnetic crystals is a prerequisite for various magnetic and magneto-optical applications.

Synthesis of a novel Ce(iii)/melamine coordination polymer and its application for corrosion protection of AA2024 in NaCl solution

We present the synthesis of a new cerium(iii)-melamine coordination polymer (CMCP) by a mixed-solvothermal method and its characterization. Characterization techniques included Raman, Fourier Transformation Infra-Red (FTIR), X-Ray Diffraction (XRD) and Scanning Electron Microscope (SEM), in which the change in the electronic environment and the crystallinity were tracked. The characterization results confirm the coordination of cerium(iii) with melamine through -NH2 groups, instead of the N atoms of the triazine ring, for which we propose a mechanism of interaction. In addition, Biovia Materials Studio package was applied to determine and investigate the molecular structure of the CMCP. All simulations were done using COMPASS force-field theory and atom-based method for summation of electrostatic and van de Waals forces. The application of the CMCP for the corrosion inhibition of AA2024 in 3.5% NaCl solution was tested using the potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. The results point out that the presence of cerium as cerium(iii) in the CMCP structure plays the fundamental role of inhibition, whereby the inhibition mechanism occurs by cathodic oxidation of Ce(iii) to Ce(iv) and cyclic reduction of Ce(iv) to Ce(iii) by melamine part of CMCP.

3D spectral fluorescence signature of cerium(III)-melamine coordination polymer: A novel sensing material for explosive detection

Hidden or buried explosives are the most common scenario by terrorist attacks; therefore explosive vapour detection is a vital demand. Explosives are electron deficient materials; the vicinity of explosives to fluorescent material can encounter electron migration. This study reports on facile synthesis of cerium (III)-melamine coordination polymer (CeM-CP) with exclusive optical properties. CeM-CP demonstrated novel spectral fluorescence properties over visible and infrared bands when stimulated with UVA LED source at 385 nm of 100 mW power. Stimulated CeM-CP demonstrated unique spectral fluorescence signal at 400, 700, and 785 nm. These fluorescent signals were correlated to cerium coordination with four nitrogen atoms; vacant orbital will be available for electron excitation migration. Spectral fluorescent signals were quenched as CeM-CP was subjected to TNT vapours. Hyperspectral imaging offered 3D plot of fluorescence signature. The main outcome is that complete fluorescence signal attenuation was achieved at 785 nm. CeM-CP could act as as a novel sensing element for explosive vapour detection.