Encapsulation of K6P2W18O62 into magnetic nanoporous Fe3O4/MIL-101 (Fe) for highly enhanced removal of organic dyes

Custom-designed 3D printed feed spacers and TFN membranes with MIL-101(Fe) for water recovery by forward osmosis

In this work, a dual-pronged approach- (i) novel thin-film nanocomposite polyether sulfone (PES) membrane with MIL-101 (Fe) and (ii) 3D printed spacers were explored to enhance water recovery by forward osmosis. The concentration of PES, pore former, draw solution, and MIL-101(Fe) was optimised for maximum pure water flux (PWF) and minimum specific reverse solute flux (SRSF). The best membrane exhibited a PWF of 7.52 Lm-2 h-1 and an SRSF of 0.33 ± 0.03 gL-1 using 1.5 M NaCl and DI water feed. The M22 membrane with the diamond-type spacer demonstrated a PWF of 2.53 Lm-2 h-1 and SRSF of 0.75 gL-1 for emulsified oily wastewater feed. The novel spacer design imparted significant turbulence to the feed flow and a lower foulant resistance of 1.3 m-1 as compared to the ladder type (1.5 m-1) or commercial spacer (1.7 m-1). This arrangement could recover 19% pure water within 12 h of operation (98% oil rejection) with a ∼ 94% flux recovery after hydraulic wash.

Innovations in metal-organic frameworks (MOFs): Pioneering adsorption approaches for persistent organic pollutant (POP) removal

Adsorption is a promising way to remove persistent organic pollutants (POPs), a major environmental issue. With their high porosity and vast surface areas, MOFs are suited for POP removal due to their excellent adsorption capabilities. This review addresses the intricate principles of MOF-mediated adsorption and helps to future attempts to mitigate organic water pollution. This review examines the complicated concepts of MOF-mediated adsorption, including MOF synthesis methodologies, adsorption mechanisms, and material tunability and adaptability. MOFs' ability to adsorb POPs via electrostatic forces, acid-base interactions, hydrogen bonds, and pi-pi interactions is elaborated. This review demonstrates its versatility in eliminating many types of contaminants. Functionalizing, adding metal nanoparticles, or changing MOFs after they are created can improve their performance and remove contaminants. This paper also discusses MOF-based pollutant removal issues and future prospects, including adsorption capacity, selectivity, scale-up for practical application, stability, and recovery. These obstacles can be overcome by rationally designing MOFs, developing composite materials, and improving material production and characterization. Overall, MOF technology research and innovation hold considerable promise for environmental pollution solutions and sustainable remediation. Desorption and regeneration in MOFs are also included in the review, along with methods for improving pollutant removal efficiency and sustainability. Case studies of effective MOF regeneration and scaling up for practical deployment are discussed, along with future ideas for addressing these hurdles.

Magnetic solid-phase extraction-based surface-enhanced Raman spectroscopy for label-free therapeutic drug monitoring of carbamazepine and clozapine in human serum

Determination of antiepileptic drugs and antipsychotics in human serum is significant in individualized drug administration and therapeutic drug monitoring (TDM). In this study, we developed a rapid label-free TDM method for the antiepileptic drug carbamazepine (CBZ) and the antipsychotic clozapine (CLO) in human serum. This detection strategy is based on the combination of surface-enhanced Raman scattering (SERS) and magnetic solid-phase extraction (MSPE). Initially, Fe3O4@SiO2@MIL-101(Fe) nanocomposites were synthesized by the layer-by-layer self-assembly method and characterized using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Brunauer-Emmett-Teller, ultraviolet-visible, and Fourier transform infrared analyses. Subsequently, CBZ and CLO were detected in human serum using Fe3O4@SiO2@MIL-101(Fe) as the solid-phase extraction adsorbent and Ag nanoparticles as SERS substrates. The potential of the MSPE-SERS method for the label-free TDM of CBZ and CLO was then investigated. Fe3O4@SiO2@MIL-101(Fe) prevents magnetic particle aggregation and demonstrates rapid magnetic separation capability that simplifies the pretreatment process and reduces interference from complex matrices. Its large surface area can effectively enrich targets in complex matrices, thereby improving the SERS detection sensitivity. The linearity between CBZ and CLO was excellent over the concentration range of 0.1-100 µg/mL (calculated as the intensity of the SERS characteristic peaks of CBZ and CLO at 728 cm and 1054 cm-1, respectively), with correlation coefficients (R2) of 0.9987 and 0.9957, and detection limits of 0.072 and 0.12 µg/mL, respectively. The recoveries of CBZ with CLO ranged from 94.0 % to 105.0 %, and their relative standard deviations were <6.8 %. Compared to other assays, the developed MSPE-SERS method has the advantages of simple sample pretreatment, rapid detection, and good reproducibility, which provides a novel approach for the TDM of other drugs.

Construction of magnetic MoS2/NiFe2O4/MIL-101(Fe) hybrid nanostructures for separation of dyes and antibiotics from aqueous media

In this study, MoS2/NiFe2O4/MIL-101(Fe) nanocomposite was synthesized by hydrothermal method and used as an adsorbent for the elimination of organic dyes and some antibiotic drugs in aqueous solutions. The synthesized nanocomposite underwent characterization through different techniques, including scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), Brunauer-Emmett-Teller (BET) surface area analysis, Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), zeta potential analysis, vibrating sample magnetometry (VSM), and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). These results demonstrated the successful insertion of MoS2within the cavities of MIL-101(Fe). The as-prepared magnetic nanocomposite was used as a new magnetic adsorbent for removing methylene blue (MB) and rhodamine B (RhB) organic dyes and tetracycline (TC) and ciprofloxacin (CIP) antibiotic drugs. For achieving the optimized conditions, the effects of initial pH, initial dye and drug concentration, temperature, and adsorbent dose on MB, TC, and CIP elimination were investigated. The results revealed that at a temperature of 25 °C, the highest adsorption capacities of MoS2/NiFe2O4/MIL-101(Fe) for MB, TC, and CIP were determined to be 999.1, 2991.3, and 1994.2 mg g-1, respectively. The pseudo-second-order model and Freundlich model are considered suitable for explaining the adsorption behavior of the MoS2/NiFe2O4/MIL-101(Fe) nanocomposite. The magnetic nanocomposite was very stable and had good recycling capability without any change in its structure.

Facile Cu-MOF-derived Co3O4 mesoporous-structure as a cooperative catalyst for the reduction nitroarenes and dyes

The present study describes the environmentally friendly and cost-effective synthesis of magnetic, mesoporous structure-Co3O4 nanoparticles (m-Co3O4) utilizing almond peel as a biotemplate. This straightforward method yields a material with high surface area, as confirmed by various characterization techniques. Subsequently, the utilization of m-Co3O4, graphene oxide (GO), Cu(II)acetate (Cu), and asparagine enabled the successful synthesis of a novel magnetic MOF, namely GO-Cu-ASP-m-Co3O4 MOF. This catalyst revealed remarkable stability that could be easily recovered using a magnet for consecutive use without any significant decline in activity for eight cycles in nitro compound reduction and organic dye degradation reactions. Consequently, GO-Cu-ASP-m-Co3O4 MOF holds immense potential as a catalyst for reduction reactions, particularly in the production of valuable amines with high industrial value, as well as for the elimination of toxic-water pollutants such as organic dyes.

Application of a novel composite of Fe3O4@SiO2/PAEDTC surrounded by MIL-101(Fe) for photocatalytic degradation of penicillin G under visible light

The novel photocatalyst of Fe3O4@SiO2/PAEDTC@MIL-101(Fe) was prepared based on the sol-gel method, and its structure and morphology were determined by SEM mapping, TEM, XRD, FTIR, and N2 adsorption-desorption analyses. The photocatalytic activity of nanocomposite was evaluated in comparison with other particles as well as adsorption and photolysis processes. The effect of operating parameters showed that the complete degradation of penicillin G (PNG) can be provided at a photocatalyst dosage of 0.6 g/L, radiation intensity of 36 W, pH of 5, and time of 60 min. In the optimum condition, 84% TOC removal was attained and the BOD5/COD rate for the treated effluent was above 0.4, which was representative of the high biodegradability of the treated effluent compared to the raw sample. The findings of energy consumption showed that PNG can be easily and effectively treated by the photocatalytic process based on magnetic MIL-101(Fe) with electrical energy per order between 10 and 20.87 kWh/m3. Due to the excellent interaction between the MIL-101(Fe) and Fe3O4@SiO2/PAEDTC, the photocatalyst stability test showed a recyclability of the particles for 5 consecutive reaction cycles with a minimum reduction of 7%. Solution treated with photocatalyst under UV and visible light sources explained that the toxicity of the effluent after treatment is significantly reduced with the growth of Escherichia coli. Scavenging experiments showed that •OH radical and hole (h+) are the main agents in degrading PNG to CO2, H2O, and biodegradable and low-toxicity products. Finally, the findings of the diagnostic analysis and comparative experiments proved that with the interaction of Fe3O4@SiO2, NH2, and MIL-101(Fe), a lower band gap can be prepared for more absorption of photons and pollutant and also more and faster production of active radicals.

Simultaneous adsorption of ciprofloxacin drug and methyl violet dye on boron nitride nanosheets: experimental and theoretical insights

In this study, hexagonal boron nitride (BN) with a sheet-like morphology is successfully synthesized by reacting borax (Na2B4O7·10H2O) and urea (CO(NH2)2) powders in air via a facile microwave-assisted method within a short reaction time (15 min). The as-prepared product is structurally characterized via Fourier transformation infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FESEM), energy dispersion X-ray analyzer (EDX), transmission electron microscopy (TEM), and Brunauer-Emmett-Teller (BET) surface area measurements. The adsorption process of methyl violet (MV) as a model of organic dyes and ciprofloxacin (CIP) as a model of antibiotics onto the boron nitride nanosheets has been experimentally and theoretically studied. The BN nanosheets exhibit the maximum adsorption capacity of 320.94 mg g-1 for MV dye and 266.29 mg g-1 for CIP antibiotic. The Freundlich isotherm model was suitable to describe the adsorption equilibrium isotherm data and the pseudo second-order model reflected the adsorption kinetics well. The calculated thermodynamic parameters show that the adsorption process is spontaneous under the measured conditions. The adsorption of CIP, MV and CIP + MV molecules on the surface of BN has been investigated through DFT calculations. The charge transfer and high adsorption capacity demonstrate the potential of BN nanosheets as an adsorbent for the simultaneous removal of MV dye and CIP drug from contaminated water.

Polyoxometalate supported on a magnetic Fe3O4/MIL-88A rod-like nanocomposite as an adsorbent for the removal of ciprofloxacin, tetracycline and cationic organic dyes from aqueous solutions

In this work, a magnetic H₃PW₁₂O₄₀/Fe₃O₄/MIL-88A (Fe) rod-like nanocomposite as a stable and effective ternary adsorbent was fabricated by the hydrothermal method and utilized for the removal of ciprofloxacin (CIP), tetracycline (TC) and organic dyes from aqueous solution. Characterization of the magnetic nanocomposite was accomplished by FT-IR, XRD, Raman spectroscopy, SEM, EDX, TEM, VSM, BET specific surface area and zeta potential analyses. The influencing factors on the adsorption potency of the H₃PW₁₂O₄₀/Fe₃O₄/MIL-88A (Fe) rod-like nanocomposite including initial dye concentration, temperature and adsorbent dose were studied. The maximum adsorption capacities of H₃PW₁₂O₄₀/Fe₃O₄/MIL-88A (Fe) for TC and CIP were 370.37 mg g^-1 and 333.33 mg g^-1 at 25 °C, respectively. In addition, the H₃PW₁₂O₄₀/Fe₃O₄/MIL-88A (Fe) adsorbent had high regeneration and reusability capacity after four cycles. In addition, the adsorbent was recovered through magnetic decantation and reused for three consecutive cycles without a considerable reduction in its performance. The adsorption mechanism was mainly ascribed to electrostatic and π-π interactions. According to these results, H₃PW₁₂O₄₀/Fe₃O₄/MIL-88A (Fe) can act as a reusable effective adsorbent for the fast elimination of tetracycline (TC), ciprofloxacin (CIP) and cationic dyes from aqueous solutions.

Synthesis and physicochemical evaluations of a novel MIL-101(Fe)-PMA-Biochar triple composite photocatalyst activated through visible-light and utilized toward degradation of organic pollutants: optimal operations and kinetics investigations

A triple photocatalytic composite of biochar, metal-organic framework, and phosphomolybdic acid was prepared through hydrothermal treatment of iron (III) chloride hexahydrate, terephthalic acid, lavandulifolia-derived biochar, and phosphomolybdic acid. It was characterized and utilized for photodegradation of Rhodamine-B (RhB) dye under visible-light irradiation. Investigations of reaction variables confirmed that, the highest yield of 96.2% was achieved at ambient temperature using 0.07 g of catalyst at pH of 7, and a dye concentration of 10 ppm. Under these optimum conditions, Methyl Orange (MO) dye was also degraded to yield 93% removal. In addition, the kinetic and thermodynamic parameters for RhB were determined. It was revealed that the photodegradation of RhB followed a pseudo-first-order kinetics with no mass transfer limitations. A corresponding chemical mechanism for this process was also suggested. Adsorption isotherms were investigated for rate of adsorption as well as adsorption capacity of the catalyst under dark conditions. Notably, the catalyst could have been reused for five cycles with a loss of around 20% activity.

Magnetic/Zeolitic Imidazolate Framework-67 Nanocomposite for Magnetic Solid-Phase Extraction of Five Flavonoid Components from Chinese Herb Dicranopteris pedata

A magnetically functionalized Fe₃O₄@ZIF-67 metal-organic framework (MOF) was prepared by electrostatic self-assembly using magnetic Fe₃O₄ nanoparticles as the core and ZIF-67 as the shell. The composite was characterized by electron microscopy, X-ray diffraction, Fourier- transform infrared spectroscopy, and Brunauer-Emmett-Teller measurements. Magnetic solid-phase extraction (MSPE) was performed on five flavonoids from Dicranopteris pedata using Fe₃O₄@ZIF-67 as an adsorbent. The developed MSPE method was combined with high-performance liquid chromatography-ultraviolet detection to preconcentrate and separate five flavonoids (rutin, quercitrin, kaempferol-3-O-α-L-rhamnoside, quercetin, and kaempferol) from Dicranopteris pedata. The factors affecting the extraction, such as the amount of Fe₃O₄@ZIF-67 adsorbent, salt ion concentration in the sample solution, vortex time, type and amount of desorbing solvent, concentration of formic acid to acidify the desorbing solvent, and acetonitrile ratio, were optimized. The developed method showed good linearity over the concentration range of 1.09-70.0 μg∙mL^-1 for the five flavonoids, with R² values between 0.9901 and 0.9945. The limits of detection and average recoveries for the five flavonoids were in the ranges of 39.5-56.2 ng∙mL^-1 and 92.2-100.7%, respectively. The method presented herein is simple, efficient, and sensitive; it can be used for enrichment analysis of the five flavonoids in Dicranopteris pedata.

Adsorptive removal of tetracycline and ciprofloxacin drugs from water by using a magnetic rod-like hydroxyapatite and MIL-101(Fe) metal-organic framework nanocomposite

A novel porous nanocomposite composed of hydroxyapatite nanorods (HAP), a MIL-101(Fe) metal-organic framework, and Fe₃O₄ nanoparticles was successfully fabricated in this work. The magnetic HAP/MIL-101(Fe)/Fe₃O₄ ternary nanocomposite was identified by various techniques, namely FT-IR spectroscopy, XRD, Raman spectroscopy, SEM, EDX, TEM, BET specific surface area, zeta potential, and VSM measurements. Tetracycline (TC) and ciprofloxacin (CIP) aqueous solutions were used to evaluate the adsorption performance of the resulting HAP/MIL-101(Fe)/Fe₃O₄ composite. The adsorption rate and capacity of HAP/MIL-101(Fe)/Fe₃O₄ were increased as compared with HAP, MIL-101(Fe), and HAP/MIL-101(Fe) samples due to the increased attraction. The influence of initial drug concentration, adsorbent dosage, temperature, and pH on the adsorption process was investigated. The results showed that the removal efficiencies of HAP/MIL-101(Fe)/Fe₃O₄ for TC and CIP were 95% and 93%, under the determined optimum conditions: pH of 7, drug concentration of 50 mg L^-1, adsorbent dosage of 30 mg, and temperature of 25 °C. The maximum adsorption capacities of HAP/MIL-101(Fe)/Fe₃O₄ for TC and CIP were 120.48 mg g^-1 and 112.35 mg g^-1, respectively. Reusability of the prepared nanocomposite was easily achieved up to three times without significant change in its structure. As a result, the synthesized magnetic nanocomposite can be reused as a suitable absorbent for TC and CIP removal from aqueous solutions.

Magnetite Metal-Organic Frameworks: Applications in Environmental Remediation of Heavy Metals, Organic Contaminants, and Other Pollutants

Due to the increasing environmental pollution caused by human activities, environmental remediation has become an important subject for humans and environmental safety. The quest for beneficial pathways to remove organic and inorganic contaminants has been the theme of considerable investigations in the past decade. The easy and quick separation made magnetic solid-phase extraction (MSPE) a popular method for the removal of different pollutants from the environment. Metal-organic frameworks (MOFs) are a class of porous materials best known for their ultrahigh porosity. Moreover, these materials can be easily modified with useful ligands and form various composites with varying characteristics, thus rendering them an ideal candidate as adsorbing agents for MSPE. Herein, research on MSPE, encompassing MOFs as sorbents and Fe₃O₄ as a magnetic component, is surveyed for environmental applications. Initially, assorted pollutants and their threats to human and environmental safety are introduced with a brief introduction to MOFs and MSPE. Subsequently, the deployment of magnetic MOFs (MMOFs) as sorbents for the removal of various organic and inorganic pollutants from the environment is deliberated, encompassing the outlooks and perspectives of this field.

Simple and sensitive nitric oxide biosensor based on the electrocatalysis of horseradish peroxidase on AuNPs@metal-organic framework composite-modified electrode

Fe-based metal–organic framework (MIL-101(Fe)) was synthesized through a simple solvothermal synthesis and then used to prepare the AuNPs-decorated MIL-101(Fe) nanocomposite (APPPM(Fe)) by a multi-step layer-by-layer assembly process. Benefited from the porous structure of MIL-101(Fe) and the multilayer assemble process, the loading amount of AuNPs on APPPM(Fe) was enhanced and exhibited a fine biocompatible interface and high conductivity. Through the intense Au–S bond, high loading amount of horseradish peroxidase was immobilized on APPPM(Fe) and the native bioactivity of HRP was kept to realize its direct electrochemistry. From the electrochemical kinetics, the constructed biosensor displayed fast electron transfer and good electrocatalysis activity for the detection of nitric oxide (NO) with wide linear range from 0.033 to 5370 μM and a low detection limit of 0.01 μM (3 σ) as well as fine stability, reproducibility and specificity. According to results of real sample analysis, the proposed electrochemical biosensor offers fast and simple detection of NO in real serum. Therefore, the present strategy definitely provided a potential application prospect in NO clinic detection and disease therapy.

Physicochemical Modeling of the Adsorption of Pharmaceuticals on MIL-100-Fe and MIL-101-Fe MOFs

The adsorption of naproxen (NAP), diclofenac (DFC), and acetaminophen (APAP) molecules from aqueous solutions using MIL-100-Fe and MIL-101-Fe metal organic frameworks (MOFs) has been analyzed and modeled. Adsorption isotherms of these pharmaceuticals were experimentally quantified at 30 and 40°C and pH 7. Textural parameters and surface chemistry of these MOFs were analyzed, and results were utilized to explain the pharmaceutical adsorption mechanism. Density Functional Theory (DFT) calculations were performed to understand the reactivity of pharmaceutical molecules, and a statistical physics model was employed to calculate the main physicochemical parameters related to the adsorption mechanism. Results showed that the adsorption of these pharmaceuticals on MOFs was multimolecular and exothermic. Both MOFs displayed the highest adsorption capacities, up to 2.19 and 1.71 mmol/g, for NAP and DFC molecules, respectively. MIL-101-Fe showed better pharmaceutical adsorption properties than MIL-100-Fe due to its highest content of Fe-O clusters and mesopore volume. Adsorption mechanism of these organic molecules could involve hydrogen bond, van der Waals forces, and electrostatic interactions with MOF surfaces. In particular, MIL-101-Fe MOF is a promising material to prepare composites with competitive adsorption capacities for facing the water pollution caused by pharmaceutical compounds.

Four Anderson-type [TeMo6O24]6−-based metal–organic complexes with a new bis(pyrimidine)-bis(amide): multifunctional electrochemical and adsorption performances

Four isostructural Anderson-type POM-based metal–organic complexes derived from a new bis(pyrimidine)-bis(amide) ligand were synthesized, showing multifunctional electrochemical sensing activities and good adsorption performances for organic dyes.

Polyoxometalate-Incorporated Framework as a Heterogeneous Catalyst for Selective Oxidation of C-H Bonds of Alkylbenzenes

Developing new catalysts for highly efficient and selective oxidation of saturated C-H bonds is significant due to their thermodynamic strength. Via incorporation of PW₁₂O₄₀^3-, pyridine-2,5-dicarboxylic acids (pydc), and Fe(III) ions into one framework, a new polyoxometalate-based metal-organic framework, [HFe₄O₂(H₂O)₄(pydc)₃PW₁₂O₄₀]·10.5H₂O (FeW-PYDC), was successfully prepared by a hydrothermal method. Interestingly, FeW-PYDC features a three-dimensional porous structure with {Fe₄O₂} interconnecting with PW₁₂O₄₀^3- units. FeW-PYDC displayed excellent performance in the selective oxidation of C-H bonds of alkylbenzenes with high conversion (95.7%) and selectivity (96.6%). As an effective heterogeneous catalyst, FeW-PYDC demonstrates good reusability and structural stability.

Composite of MOF and chitin as an efficient catalyst for photodegradation of organic dyes

A novel composite has been fabricated by using MOF and chitin as a natural and biocompatible compound. To this purpose, MOF was synthesized by using 2-aminoterephthalic acid and iron (III) chloride hexahydrate and then reacted with Cl-functionalized chitin. The resulting composite was characterized and utilized as a catalyst for degradation of methylene blue both in dark condition and under visible light irradiation. The results indicated superior catalytic activity under visible light irradiation. Furthermore, study of the reaction variables, including basicity, dye concentration and catalyst loading showed that the highest catalytic activity was achieved at basic condition. It was also found that both initial dye concentration and catalyst loading can affect the catalytic activity. To disclose the merits of the composite compared to its individual components, kinetic studies of the photo-degradation process in the presence of the composite, chitin and MOF have been performed. The results confirmed superior activity the composite compared to its components. The study of the mechanism of the reaction using scavengers confirmed that the created holes (h⁺) are the most effective species in the process of photocatalytic degradation of MB. Notably, the catalyst was recyclable and could be used for degradation of other dyes.

Cobalt(ii) Schiff base chemically grafted onto magnetic amino-functionalized reduced graphene oxide nanosheets for highly rapid and selective removal of methyl orange

A magnetic graphene oxide functionalized with a Co(ii) Schiff base complex (Co(SB)-rGO/ZnFe₂O₄) was synthesized and applied as an ultrafast adsorbent to remove anionic organic dyes from water.

Metal-organic framework MIL-100(Fe) for dye removal in aqueous solutions: Prediction by artificial neural network and response surface methodology modeling

In this study, a metal organic framework MIL-100(Fe) was synthesized for rhodamine B (RB) removal from aqueous solutions. An experimental design was conducted using a central composite design (CCD) method to obtain the RB adsorption data (n = 30) from batch experiments. In the CCD approach, solution pH, adsorbent dose, and initial RB concentration were included as input variables, whereas RB removal rate was employed as an output variable. Response surface methodology (RSM) and artificial neural network (ANN) modeling were performed using the adsorption data. In RSM modeling, the cubic regression model was developed, which was adequate to describe the RB adsorption according to analysis of variance. Meanwhile, the ANN model with the topology of 3:8:1 (three input variables, eight neurons in one hidden layer, and one output variable) was developed. In order to further compare the performance between the RSM and ANN models, additional adsorption data (n = 8) were produced under experimental conditions, which were randomly selected in the range of the input variables employed in the CCD matrix. The analysis showed that the ANN model (R² = 0.821) had better predictability than the RSM model (R² = 0.733) for the RB removal rate. Based on the ANN model, the optimum RB removal rate (>99.9%) was predicted at pH 5.3, adsorbent dose 2.0 g L^-1, and initial RB concentration 73 mg L^-1. In addition, pH was determined to be the most important input variable affecting the RB removal rate. This study demonstrated that the ANN model could be successfully employed to model and optimize RB adsorption to the MIL-100(Fe).