A dual-emission Acf@bioMOF-1 platform as fluorescence sensor for highly efficient detection of inorganic ions

Acriflavine-modified UIO-66 ratiometric fluorescent sensor for highly selective and fast detection of hypochlorite in water

Hypochlorite (ClO-) as a kind of highly toxic pollutant has garnered significant interest in detection methods, highlighting the pressing need to develop intelligent functional materials for the qualitative and quantitative analysis of ClO- in aqueous solutions. Herein, a ratiometric fluorescent sensor was prepared by the combination of acriflavine (Acr) and UIO-66 via a post-synthetic modification strategy. Acr/UIO-66 exhibited both high crystallinity typical of metal-organic frameworks and demonstrated good fluorescent and thermal stability. Additionally, Acr/UIO-66 functioned effectively as a dual-responsive fluorescent platform for detecting ClO- in domestic drinking and surface water samples. This material displayed high sensitivity, exceptional selectivity, and superior anti-interference capabilities, along with fast respond time (60 s), a wide pH range (4.0-7.0), high recoveries (94.46-118.00 %), a broad linear range (0-28 µmol L-1) and low detection limits (0.74 µmol L-1). This study broadened the potential applications of fluorescent metal-organic frameworks and presented a feasible solution for water quality monitoring.

Simple fluorochromic detection of chromium with ascorbic acid functionalized luminescent Bio-MOF-1

The bioaccumulation of various heavy metals in the environment and agriculture is posing serious hazards to human health. Hexavalent chromium is one of the most encountered heavy metal pollutants. The routine monitoring of Cr(VI) via simple methods assumes great analytical significance in sectors like environmental safety, food quality, etc. This study reports a novel biocompatible and luminescent metal-organic framework (ascorbic acid functionalized Bio-MOF-1) based "Turn-on" nanoprobe for rapid and sensitive optical detection of Cr(VI). Bio-MOF-1 has been synthesized, functionalized with ascorbic acid (AA), and then comprehensively characterized for its key material properties. The presence of Cr(VI) results in the photoluminescence recovery of Bio-MOF-1/AA. Using the above approach, Cr(VI) is detected over a wide concentration range of 0.02 to 20 ng mL-1, with the limit of detection being 0.01 ng mL-1. The nanoprobe is capable of detecting Cr(VI) in real water as well as in some spiked food samples. Hence, the ascorbic acid functionalized Bio-MOF-1 nanoprobe is established as a potential on-field detection tool for Cr(VI).

The construction of dual-emissive ratiometric fluorescent probes based on fluorescent nanoparticles for the detection of metal ions and small molecules

With the rapid development of fluorescent nanoparticles (FNPs), such as CDs, QDs, and MOFs, the construction of FNP-based probes has played a key role in improving chemical sensors. Ratiometric fluorescent probes exhibit distinct advantages, such as resistance to environmental interference and achieving visualization. Thus, FNP-based dual-emission ratiometric fluorescent probes (DRFPs) have rapidly developed in the field of metal ion and small molecule detection in the past few years. In this review, firstly we introduce the fluorescence sensing mechanisms; then, we focus on the strategies for the fabrication of DRFPs, including hybrid FNPs, single FNPs with intrinsic dual emission and target-induced new emission, and DRFPs based on auxiliary nanoparticles. In the section on hybrid FNPs, methods to assemble two types of FNPs, such as chemical bonding, electrostatic interaction, core satellite or core-shell structures, coordination, and encapsulation, are introduced. In the section on single FNPs with intrinsic dual emission, methods for the design of dual-emission CDs, QDs, and MOFs are discussed. Regarding target-induced new emission, sensitization, coordination, hydrogen bonding, and chemical reaction induced new emissions are discussed. Furthermore, in the section on DRFPs based on auxiliary nanoparticles, auxiliary nanomaterials with the inner filter effect and enzyme mimicking activity are discussed. Finally, the existing challenges and an outlook on the future of DRFP are presented. We sincerely hope that this review will contribute to the quick understanding and exploration of DRFPs by researchers.

Luminescent Guests Encapsulated in Metal-Organic Frameworks for Portable Fluorescence Sensor and Visual Detection Applications: A Review

Metal-organic frameworks (MOFs) have excellent applicability in several fields and have significant structural advantages, due to their open pore structure, high porosity, large specific surface area, and easily modifiable and functionalized porous surface. In addition, a variety of luminescent guest (LG) species can be encapsulated in the pores of MOFs, giving MOFs a broader luminescent capability. The applications of a variety of LG@MOF sensors, constructed by doping MOFs with LGs such as lanthanide ions, carbon quantum dots, luminescent complexes, organic dyes, and metal nanoclusters, for fluorescence detection of various target analyses such as ions, biomarkers, pesticides, and preservatives are systematically introduced in this review. The development of these sensors for portable visual fluorescence sensing applications is then covered. Finally, the challenges that these sectors currently face, as well as the potential for future growth, are briefly discussed.

Recent advances in Metal-Organic Frameworks as nanocarriers for triggered release of anticancer drugs: Brief history, biomedical applications, challenges and future perspective

Metal-Organic Frameworks (MOFs) have emerged as a promising biomedical material due to its unique features such as high surface area, pore volume, variable pore size, flexible functional groups, and excellent efficiency for drug loading. In this review, we explored the use of novel and smart metal organic frameworks as drug delivery vehicles to discover a safer and more controlled mode of drug release aiming to minimize their side effects. Here, we systematically discussed the background of MOFs following a thorough review on structural and physical properties of MOFs, their synthesis techniques, and the important characteristics to establish a strong foundation for future research. Furthermore, the current status on the potential applications of MOF-based stimuli-responsive drug delivery systems, including pH-, ion-, temperature-, light-, and multiple responsive systems for the delivery of anticancer drugs has also been presented. Lastly, we discuss the prospects and challenges in implementation of MOF-based materials in the drug delivery. Therefore, this review will help researchers working in the relevant fields to enhance their understanding of MOFs for encapsulation of various drugs as well as their stimuli responsive mechanism.

Multi-Emission from Single Metal-Organic Frameworks under Single Excitation

Multi-emission materials have come to prominent attention ascribed to their extended applications other than single-emission ones. General and robust design strategies of a single matrix with multi-emission under single excitation are urgently required. Metal-organic frameworks (MOFs) are porous materials prepared with organic ligands and metal nodes. The variety of metal nodes and ligands makes MOFs with great superiority as multi-emission matrices. Guest species encapsulated into the channels or pores of MOFs are the additional emission sites for multi-emission. In this review, multi-emission MOFs according to the different excitation sites are summarized and classified. The emission mechanisms are discussed, such as antenna effect, excited-state intramolecular proton transfer (ESIPT) and tautomerism for dual-emission. The factors that affect the emissions are revealed, including ligand-metal energy transfer and host-guest interaction, etc. Multi-emission MOFs could be predictably designed and prepared, once the emissive factors are controlled rationally in combination with the different multi-emission mechanisms. Correspondingly, new and practical applications are realized, including but not limited to ratiometric/multi-target sensing and bioimaging, white light-emitting diodes, and anti-counterfeiting. The design strategies of multi-emission MOFs and their extensive applications are reviewed. The results will shed light on other multi-emission systems to develop the structure-derived functionality and applications.

Flexible ligand–Gd dye-encapsulated dual-emission metal–organic framework

We revealed the general considerations for host–guest ML-MOFs from the perspectives of ligands, metal nodes and embedded dyes. The results can be used to guide the preparation of other ML-MOFs to realize the host–guest strategy.

Designed multifunctional ratiometric fluorescent probe for directly detecting fluoride ion/ dichromate and indirectly monitoring urea

UiO-66-NH₂@eosin Y composite was obtained by confining eosin Y (EY) into the cavities of Zr-MOF and could emit two fluorescence peaks at 453 and 543 nm at an excitation wavelength of 355 nm. This multi-responsive and multifunctional ratiometric fluorescent nanoprobe not only enable directly distinct detection of F^-/Cr₂O₇^2- with ultra-high selectivity and sensitivity, but also could indirectly monitor the concentration of urea based on unique enzymatic hydrolysis reaction. The multifunctional probe was utilized for fluorescence labeling F-/Cr₂O₇^2- in sweat latent fingerprint through an environmentally friendly powder strategy and exhibited obvious luminescence visualization changes. Notably, the corresponding portable on-line test strips of probe for detection of F^- and Cr₂O₇^2- were made for monitoring the levels of F^- and Cr₂O₇^2-. Furthermore, the probe was applied to evaluate the degrees of F^-/Cr₂O₇^2- in HepG-2 cell and urea in serum with superior results,which indicate the potential application of the as-synthesized UiO-66-NH₂@EY as multifunctional probe for the detection of F^-, Cr₂O₇^2- and urea in biological samples. Finally, in order to extend the device-based applications of probe, an AND-OR-coupled molecular logic gate was put on agenda.

Coordination sphere hydrogen bonding as a structural element in metal-organic Frameworks

In the design of new metal-organic frameworks, the constant challenges of framework stability and structural predictability continue to influence ligand choice in favour of well-studied dicarboxylates and similar ligands. However, a small subset of known MOF ligands contains suitable functionality for coordination sphere hydrogen bonding which can provide new opportunities in ligand design. Such interactions may serve to support and rigidity the coordination geometry of mononuclear coordination spheres, as well as providing extra thermodynamic and kinetic stabilisation to meet the challenge of hydrolytic stability in these materials. In this perspective, a collection of pyrazole, amine, amide and carboxylic acid containing species are examined through the lens of (primarily) inner-sphere hydrogen bonding. The influence of these interactions is then related to the overall structure, stability and function of these materials, to provide starting points for harnessing these interactions in future materials design.

Encapsulation of Luminescent Guests to Construct Luminescent Metal-Organic Frameworks for Chemical Sensing

Metal-organic frameworks (MOFs), which are a class of coordination polymers constructed by metal ions or clusters with organic ligands, have emerged as exciting inorganic-organic hybrid materials with the superiorities of inherent crystallinity, adjustable pore size, clear structure, and high degree of functionalization. The MOFs have attracted much attention to develop good luminescent functional materials due to their inherent luminescent centers of both inorganic and organic photonic units. Furthermore, the pores within MOFs can also be used to encapsulate a large number of luminescent guest species, which provides a broader luminescent property for MOF materials. MOFs possess the incomparable multifunctional advantages of inorganic and organic luminescent materials. A large number of luminescent MOFs (LMOFs) have been synthesized for applications in sensing, white-light-emitting diodes (LED), photocatalysis, biomedicine, etc. This paper reviews the encapsulation of various luminescent guests such as lanthanide ions, dyes, quantum dots, and luminescent complexes in metal-organic frameworks to construct luminous sensors with single- or double-emission centers, as well as the research progress of these sensors in chemical sensing. Finally, the challenges in these fields were outlined and the prospects for future development were put forward.

Recent advances in metal-organic frameworks as adsorbent materials for hazardous dye molecules

Water is vital for the sustenance of all forms of life. Hence, water pollution is a universal crisis for the survival for all forms of life and a hurdle in sustainable development. Textile industry is one of the anthropogenic activities that severely pollutes water bodies. Inefficient dyeing processes result in thousands of tons of synthetic dyes being dumped in water bodies every year. Therefore, the efficient removal of synthetic dyes from wastewater has become a challenging research field. Owing to their tuneable structure-property aspects, metal-organic frameworks (MOFs) have emerged as promising adsorbents for the adsorptive removal of dyes from wastewater and textile effluents. In this perspective, we highlight recent studies involving the application of MOFs for the adsorptive removal of hazardous dye molecules. We also classify the developed MOFs into cationic, anionic, and neutral framework categories to comprehend their suitability for the removal of a given class of dyes.